RAD-MIB :: agnCLoadCnfgIdxCmd

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRAD-MIBagnCLoadCnfgIdxCmd

agnCLoadCnfgIdxCmd

Module: RAD-MIB

OID (symbolic): RAD-MIB::agnCLoadCnfgIdxCmd

OID (numeric): 1.3.6.1.4.1.164.3.1.2.2.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is valid only on Valid configurations (agnSEntryIsValid)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.2.2.3
snmpwalk -v2c -c public <target> RAD-MIB::agnCLoadCnfgIdxCmd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.2.2.3.1
snmpget -v2c -c public <target> RAD-MIB::agnCLoadCnfgIdxCmd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.1.2.2.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agnCLoadCnfgIdxCmd.1

Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::agnCLoadCnfgIdxCmd OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.1wanGenDACS-MIB
1.3.6.1.4.1.164.3.1.2agnWanGenDACS-MIB
1.3.6.1.4.1.164.3.1.2.2cnfgAgnGenDACS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164.3.1.2.2.3agnCLoadCnfgIdxCmdRAD-MIB