All MIBs › PSA-LinLsiLogicTrap-MIB
Category: Server Hardware Monitoring
Description: Provides NEC ESMPRO ServerAgents trap notifications for LSI Logic SCSI/SAS controller driver fault events on Linux.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is PSA-LinLsiLogicTrap-MIB?
This NEC ESMPRO ServerAgent MIB defines trap notifications for the LSI Logic SCSI/SAS storage controller driver on NEC servers running Linux. Its data category is storage-controller fault notification, using the same shared varbind set (partition/unit identity, event level/ID, suspect component) as other NEC trap MIBs. It is used to monitor the hardware/software status of the LSI SCSI/SAS controller and attached storage by alerting when the driver detects a controller or disk-channel fault, identifying the affected unit via trapUnitName/trapModelNo/trapSerialNo so storage problems can be triaged quickly. It depends on the common trap varbind structure defined in PSA-ComTrap-MIB, applying it specifically to LSI Logic driver events. It is deployed on NEC Express5800/SIGMABLADE Linux servers with LSI Logic SCSI/SAS RAID or HBA controllers, where storage-controller fault alerts are forwarded to an NMS, and administrators can get the PSA-LinLsiLogicTrap-MIB download to load into their MIB browser for the full trap definitions.
IPNetwork Monitor allows you to monitor SNMP objects defined in PSA-LinLsiLogicTrap-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Fujitsu PRIMEQUEST server partition, Linux, LSI Logic SCSI/SAS controller (driver fault traps)
Monitoring Examples
This module defines trap notifications rather than polled counters; upon a driver-detected controller fault it emits a trap with trapEventLevel, trapEventId, and trapUnitName, and an operator would examine trapSuspect alongside trapModelNo/trapSerialNo to determine whether the LSI controller itself or an attached device is the suspect faulty component.
What Can Be Monitored
- storage controller fault event level
- affected controller/unit name
- suspect storage component
- controller model/serial number
- event ID/type
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
From RFC1213-MIB
| DisplayString | |
| mib-2 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| fujitsu | 1.3.6.1.4.1.211 | |||
| products | 1.3.6.1.4.1.211.1 | |||
| iaServer | 1.3.6.1.4.1.211.1.31 | |||
| primequest | 1.3.6.1.4.1.211.1.31.1 | |||
| partition | 1.3.6.1.4.1.211.1.31.1.2 | |||
| parititonVariables | 1.3.6.1.4.1.211.1.31.1.2.200 | |||
| trapVarComInfo | 1.3.6.1.4.1.211.1.31.1.2.200.1 | |||
| STR trapPartitionName | 1.3.6.1.4.1.211.1.31.1.2.200.1.1 | DisplayString | not-accessible | Partition name which trap is generated. |
| INT trapPartitionId | 1.3.6.1.4.1.211.1.31.1.2.200.1.2 | INTEGER | not-accessible | Paritition identifier which trap is generated. |
| STR trapEventLevel | 1.3.6.1.4.1.211.1.31.1.2.200.1.3 | DisplayString | not-accessible | Event level |
| INT trapEventId | 1.3.6.1.4.1.211.1.31.1.2.200.1.4 | INTEGER | not-accessible | Event Identifier |
| STR trapUnitName | 1.3.6.1.4.1.211.1.31.1.2.200.1.5 | DisplayString | not-accessible | Unit name which trap is generated. |
| STR trapMmbVip | 1.3.6.1.4.1.211.1.31.1.2.200.1.6 | DisplayString | not-accessible | Management board vertual IP address. |
| trapVarDivInfo | 1.3.6.1.4.1.211.1.31.1.2.200.2 | |||
| STR trapPartNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.1 | DisplayString | not-accessible | Parts number of trap source. |
| STR trapStepping | 1.3.6.1.4.1.211.1.31.1.2.200.2.2 | DisplayString | not-accessible | |
| STR trapSerialNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.3 | DisplayString | not-accessible | Serial number of trap source. |
| STR trapModelNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.4 | DisplayString | not-accessible | Model number of trap source. |
| STR trapSuspect | 1.3.6.1.4.1.211.1.31.1.2.200.2.5 | DisplayString | not-accessible | Logical name or pci bus number of trap source. |
| STR trapVendorId | 1.3.6.1.4.1.211.1.31.1.2.200.2.6 | DisplayString | not-accessible | Vendor identifier of trap source. |
| STR trapDeviceId | 1.3.6.1.4.1.211.1.31.1.2.200.2.7 | DisplayString | not-accessible | Device identifier of trap source. |
| STR trapRevision | 1.3.6.1.4.1.211.1.31.1.2.200.2.8 | DisplayString | not-accessible | Revision of trap source. |
| STR trapCardName | 1.3.6.1.4.1.211.1.31.1.2.200.2.9 | DisplayString | not-accessible | Device name of trap source. |
| STR trapErrDetail | 1.3.6.1.4.1.211.1.31.1.2.200.2.10 | DisplayString | not-accessible | |
| STR trapErrCode | 1.3.6.1.4.1.211.1.31.1.2.200.2.11 | DisplayString | not-accessible | |
| STR trapIrpCode | 1.3.6.1.4.1.211.1.31.1.2.200.2.12 | DisplayString | not-accessible | |
| INT trapHbaNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.13 | INTEGER | not-accessible | |
| STR trapErrCause | 1.3.6.1.4.1.211.1.31.1.2.200.2.14 | DisplayString | not-accessible | |
| INT trapPathNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.15 | INTEGER | not-accessible | |
| STR trapDiskId | 1.3.6.1.4.1.211.1.31.1.2.200.2.16 | DisplayString | not-accessible | |
| STR trapFmrDiskId | 1.3.6.1.4.1.211.1.31.1.2.200.2.17 | DisplayString | not-accessible | |
| STR trapCurDiskId | 1.3.6.1.4.1.211.1.31.1.2.200.2.18 | DisplayString | not-accessible | |
| STR trapPathId | 1.3.6.1.4.1.211.1.31.1.2.200.2.19 | DisplayString | not-accessible | |
| STR trapPhysIf | 1.3.6.1.4.1.211.1.31.1.2.200.2.20 | DisplayString | not-accessible | |
| STR trapVirtualIf | 1.3.6.1.4.1.211.1.31.1.2.200.2.21 | DisplayString | not-accessible | |
| STR trapLogicalIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.22 | DisplayString | not-accessible | |
| STR trapWatchIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.23 | DisplayString | not-accessible | |
| STR trapInterface | 1.3.6.1.4.1.211.1.31.1.2.200.2.24 | DisplayString | not-accessible | |
| STR trapSourceIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.25 | DisplayString | not-accessible | |
| STR trapDestIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.26 | DisplayString | not-accessible | |
| STR trapModelName | 1.3.6.1.4.1.211.1.31.1.2.200.2.27 | DisplayString | not-accessible | Model name of trap source. |
| STR trapFlagcode | 1.3.6.1.4.1.211.1.31.1.2.200.2.28 | DisplayString | not-accessible | |
| partitionEnterprise | 1.3.6.1.4.1.211.1.31.1.2.201 | |||
| psaComTrap | 1.3.6.1.4.1.211.1.31.1.2.201.1 | |||
| psaLinLanComTrap | 1.3.6.1.4.1.211.1.31.1.2.201.2 | |||
| psaLinIntelE100Trap | 1.3.6.1.4.1.211.1.31.1.2.201.3 | |||
| psaLinIntelE1000Trap | 1.3.6.1.4.1.211.1.31.1.2.201.4 | |||
| psaLinBcm5700Trap | 1.3.6.1.4.1.211.1.31.1.2.201.5 | |||
| psaLinEmulexTrap | 1.3.6.1.4.1.211.1.31.1.2.201.6 | |||
| psaLinLsiLogicTrap | 1.3.6.1.4.1.211.1.31.1.2.201.7 | |||
| NTF scsiLsiEvent0 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13000 | mptscsih: Software error (NULL or BAD request frame ptr) | ||
| NTF scsiLsiEvent1 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13001 | mptscsih: Software error (Unexpected msg function reply received) | ||
| NTF scsiLsiEvent2 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13002 | mptscsih: Adapter error (32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED) | ||
| NTF scsiLsiEvent3 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13003 | mptscsih: Software error (Insufficient memory to add adapter) | ||
| NTF scsiLsiEvent4 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13004 | mptscsih: Software error (MPT adapter has no memory region defined) | ||
| NTF scsiLsiEvent5 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13005 | mptscsih: Software error (Unable to map adapter memory) | ||
| NTF scsiLsiEvent6 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13006 | mptscsih: Software error (Unable allocate interrupt) | ||
| NTF scsiLsiEvent7 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13007 | mptscsih: Adapter error (Not initialize properly) | ||
| NTF scsiLsiEvent8 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13008 | mptscsih: Adapter error (pci-suspend: IOC msg unit reset failed) | ||
| NTF scsiLsiEvent9 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13009 | mptscsih: Adapter error (pci-resume: Cannot recover) | ||
| NTF scsiLsiEvent10 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13010 | mptscsih: Software error (Owned by PEER..skipping) | ||
| NTF scsiLsiEvent11 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13011 | mptscsih: Adapter error (Adapter not ready) | ||
| NTF scsiLsiEvent12 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13012 | mptscsih: Adapter error (Adapter not ready) | ||
| NTF scsiLsiEvent13 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13013 | mptscsih: Software error (FIFO mgmt alloc) | ||
| NTF scsiLsiEvent14 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13014 | mptscsih: Adapter error (init failure) | ||
| NTF scsiLsiEvent15 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13015 | mptscsih: Adapter error (firmware upload failure) | ||
| NTF scsiLsiEvent16 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13016 | mptscsih: Software error (Already bound iocx iocy) | ||
| NTF scsiLsiEvent17 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13017 | mptscsih: Adapter error (firmware downloadboot failure) | ||
| NTF scsiLsiEvent18 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13018 | mptscsih: Adapter error (Unexpected doorbell active) | ||
| NTF scsiLsiEvent19 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13019 | mptscsih: Adapter error (IOC is in FAULT state) | ||
| NTF scsiLsiEvent20 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13020 | mptscsih: Adapter error (IOC msg unit reset failed) | ||
| NTF scsiLsiEvent21 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13021 | mptscsih: Adapter error (IO unit reset failed) | ||
| NTF scsiLsiEvent22 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13022 | mptscsih: Adapter error (Wait IOC_READY state timeout) | ||
| NTF scsiLsiEvent23 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13023 | mptscsih: Adapter error (Can't get IOCFacts; IOC NOT READY) | ||
| NTF scsiLsiEvent24 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13024 | mptscsih: Software error (IOC reported invalid 0 request size) | ||
| NTF scsiLsiEvent25 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13025 | mptscsih: Adapter error (Invalid IOC facts reply) | ||
| NTF scsiLsiEvent26 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13026 | mptscsih: Adapter error (Can't get IOCFacts; IOC NOT READY) | ||
| NTF scsiLsiEvent27 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13027 | mptscsih: Adapter error (Wait IOC_OP state timeout) | ||
| NTF scsiLsiEvent28 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13028 | mptscsih: Adapter error (Failed to come READY after reset) | ||
| NTF scsiLsiEvent29 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13029 | mptscsih: Adapter error (Enable Diagnostic mode FAILED) | ||
| NTF scsiLsiEvent31 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13031 | mptscsih: Adapter error (ResetHistory bit failed to clear) | ||
| NTF scsiLsiEvent32 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13032 | mptscsih: Adapter error (Diagnostic reset FAILED) | ||
| NTF scsiLsiEvent34 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13034 | mptscsih: Software error (Unable to allocate Reply Request; Chain Buffers) | ||
| NTF scsiLsiEvent35 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13035 | mptscsih: Software error (Unable to allocate Sense Buffers) | ||
| NTF scsiLsiEvent36 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13036 | mptscsih: Adapter error (Doorbell ACK timeout) | ||
| NTF scsiLsiEvent37 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13037 | mptscsih: Adapter error (Doorbell INT timeout) | ||
| NTF scsiLsiEvent38 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13038 | mptscsih: Adapter error (Handshake reply failure) | ||
| NTF scsiLsiEvent39 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13039 | mptscsih: Software error (Unable to allocate event ACK request frame) | ||
| NTF scsiLsiEvent40 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13040 | mptscsih: Adapter error (Firmware Reload FAILED) | ||
| NTF scsiLsiEvent41 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13041 | mptscsih: Adapter error (Cannot recover) | ||
| NTF scsiLsiEvent42 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13042 | mptscsih: Adapter error (LogInfo) | ||
| NTF scsiLsiEvent44 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13044 | mptscsih: Software error (Unable to copy mpt_ioctl_header data) | ||
| NTF scsiLsiEvent45 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13045 | mptscsih: Software error (Unable to copy mpt_ioctl_diag_reset struct) | ||
| NTF scsiLsiEvent46 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13046 | mptscsih: Adapter error (reset Failed) | ||
| NTF scsiLsiEvent47 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13047 | mptscsih: Software error (Unable to copy mpt_fw_xfer struct) | ||
| NTF scsiLsiEvent48 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13048 | mptscsih: Software error (Unable to copy f/w buffer hunk) | ||
| NTF scsiLsiEvent49 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13049 | mptscsih: Adapter error (IOC says it doesn't support F/W download) | ||
| NTF scsiLsiEvent50 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13050 | mptscsih: Adapter error (IOC says: IOC_BUSY) | ||
| NTF scsiLsiEvent51 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13051 | mptscsih: Adapter error (IOC returned bad status) | ||
| NTF scsiLsiEvent52 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13052 | mptscsih: Software error (Not enough memory) | ||
| NTF scsiLsiEvent53 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13053 | mptscsih: Software error (Chain required) | ||
| NTF scsiLsiEvent54 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13054 | mptscsih: Software error (Too many SG frags) | ||
| NTF scsiLsiEvent55 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13055 | mptscsih: Software error (No memory available) | ||
| NTF scsiLsiEvent56 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13056 | mptscsih: Software error (Unable to read in mpt_ioctl_iocinfo struct) | ||
| NTF scsiLsiEvent57 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13057 | mptscsih: Software error (Structure size mismatch) | ||
| NTF scsiLsiEvent58 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13058 | mptscsih: Software error (Unable to write out mpt_ioctl_iocinfo struct) | ||
| NTF scsiLsiEvent59 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13059 | mptscsih: Software error (Unable to read in mpt_ioctl_targetinfo struct) | ||
| NTF scsiLsiEvent60 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13060 | mptscsih: Software error (No memory available) | ||
| NTF scsiLsiEvent62 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13062 | mptscsih: Software error (Buffer is full but volume is available on IOC) | ||
| NTF scsiLsiEvent63 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13063 | mptscsih: Software error (Buffer is full but more targets are available on IOC) | ||
| NTF scsiLsiEvent64 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13064 | mptscsih: Software error (Unable to write out mpt_ioctl_targetinfo struct) | ||
| NTF scsiLsiEvent66 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13066 | mptscsih: Software error (Unable to read in mpt_ioctl_test struct) | ||
| NTF scsiLsiEvent67 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13067 | mptscsih: Software error (Unable to write out mpt_ioctl_test struct) | ||
| NTF scsiLsiEvent68 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13068 | mptscsih: Software error (Unable to read in mpt_ioctl_eventquery struct) | ||
| NTF scsiLsiEvent69 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13069 | mptscsih: Software error (Unable to write out mpt_ioctl_eventquery struct) | ||
| NTF scsiLsiEvent70 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13070 | mptscsih: Software error (Unable to read in mpt_ioctl_eventenable struct) | ||
| NTF scsiLsiEvent71 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13071 | mptscsih: Software error (Insufficient memory to add adapter) | ||
| NTF scsiLsiEvent72 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13072 | mptscsih: Software error (Unable to read in mpt_ioctl_eventreport struct) | ||
| NTF scsiLsiEvent73 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13073 | mptscsih: Software error (Unable to write out mpt_ioctl_eventreport struct) | ||
| NTF scsiLsiEvent74 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13074 | mptscsih: Software error (Unable to read in mpt_ioctl_replace_fw struct) | ||
| NTF scsiLsiEvent75 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13075 | mptscsih: Software error (Unable to read in mpt_ioctl_replace_fw image) | ||
| NTF scsiLsiEvent76 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13076 | mptscsih: Software error (Unable to read in mpt_ioctl_command struct) | ||
| NTF scsiLsiEvent77 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13077 | mptscsih: Software error (No memory available during Software init) | ||
| NTF scsiLsiEvent78 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13078 | mptscsih: Adapter error (Busy with IOC Reset) | ||
| NTF scsiLsiEvent79 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13079 | mptscsih: Software error (Request frame too large) | ||
| NTF scsiLsiEvent80 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13080 | mptscsih: Software error (Unable to read MF from mpt_ioctl_command struct) | ||
| NTF scsiLsiEvent81 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13081 | mptscsih: Software error (Target ID out of bounds) | ||
| NTF scsiLsiEvent82 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13082 | mptscsih: Software error (SCSI driver is not loaded) | ||
| NTF scsiLsiEvent84 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13084 | mptscsih: Adapter or Software error (SCSI driver not loaded or SCSI host not found) | ||
| NTF scsiLsiEvent85 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13085 | mptscsih: Software error (IOC_INIT issued with 1 or more incorrect parameters.Rejected) | ||
| NTF scsiLsiEvent86 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13086 | mptscsih: Software error (Illegal request) | ||
| NTF scsiLsiEvent87 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13087 | mptscsih: Software error (Unable to read user data struct) | ||
| NTF scsiLsiEvent88 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13088 | mptscsih: Adapter error (Timeout Occurred on IOCTL! Reset IOC) | ||
| NTF scsiLsiEvent89 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13089 | mptscsih: Software error (Unable to write out reply frame) | ||
| NTF scsiLsiEvent90 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13090 | mptscsih: Software error (Unable to write sense data to user) | ||
| NTF scsiLsiEvent91 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13091 | mptscsih: Software error (Unable to write data to user) | ||
| NTF scsiLsiEvent92 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13092 | mptscsih: Software error (Unable to read in hp_host_info struct) | ||
| NTF scsiLsiEvent93 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13093 | mptscsih: Software error (Unable to write out hp_host_info) | ||
| NTF scsiLsiEvent94 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13094 | mptscsih: Software error (Unable to read in hp_host_targetinfo struct) | ||
| NTF scsiLsiEvent95 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13095 | mptscsih: Software error (Unable to write out mpt_ioctl_targetinfo struct) | ||
| NTF scsiLsiEvent96 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13096 | mptscsih: Software error (Can't register misc device) | ||
| NTF scsiLsiEvent97 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13097 | mptscsih: Software error (Failed to register with Fusion MPT base Software) | ||
| NTF scsiLsiEvent99 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13099 | mptscsih: Software error (NULL ScsiCmd ptr) | ||
| NTF scsiLsiEvent100 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13100 | mptscsih: Adapter error (Skipping because it's not operational) | ||
| NTF scsiLsiEvent101 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13101 | mptscsih: Adapter error (Skipping because it's disabled) | ||
| NTF scsiLsiEvent102 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13102 | mptscsih: Adapter error (SCSI Initiator mode is NOT enabled) | ||
| NTF scsiLsiEvent103 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13103 | mptscsih: Software error (Unable to register controller with SCSI subsystem) | ||
| NTF scsiLsiEvent104 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13104 | mptscsih: Software error (DV thread still active) | ||
| NTF scsiLsiEvent105 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13105 | mptscsih: Software error (TMHandler NULL ioc) | ||
| NTF scsiLsiEvent106 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13106 | mptscsih: Adapter error (IOC issue of TaskMgmt failed) | ||
| NTF scsiLsiEvent107 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13107 | mptscsih: Adapter error (Error issuing abort task) | ||
| NTF scsiLsiEvent109 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13109 | mptscsih: Adapter error (Error processing TaskMgmt request) | ||
| NTF scsiLsiEvent110 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13110 | mptscsih: Adapter error (Firmware Reload FAILED) | ||
| NTF scsiLsiEvent111 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13111 | mptscsih: Software error (slave_alloc kmalloc FAILED) | ||
| NTF scsiLsiEvent113 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13113 | mptscsih: Software error (ScanDvComplete) | ||
| NTF scsiLsiEvent114 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13114 | mptscsih: Software error (ScanDvComplete) | ||
| NTF scsiLsiEvent115 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13115 | mptscsih: Adapter error (Firmware Reload FAILED) | ||
| NTF scsiLsiEvent116 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13116 | mptscsih: Software error (Null cmdPtr) | ||
| NTF scsiLsiEvent117 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13117 | mptscsih: Device error (Release failed) | ||
| NTF scsiLsiEvent119 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13119 | mptscsih: Software error (unexpected boot option ignored) | ||
| NTF scsiLsiEvent120 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13120 | mptscsih: Adapter error (detects pci parity error) | ||
| NTF scsiLsiEvent121 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13121 | mptscsih: Adapter error (detects pci parity error) | ||
| NTF scsiLsiEvent122 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13122 | mptscsih: Adapter error (couldn't read pci register) | ||
| NTF scsiLsiEvent123 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13123 | mptscsih: Adapter error (detects pci parity error) | ||
| NTF scsiLsiEvent124 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13124 | mptscsih: Adapter error (detects pci parity error) | ||
| NTF scsiLsiEvent125 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13125 | mptscsih: Adapter error (detects pci parity error) | ||
| NTF scsiLsiEvent126 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13126 | mptscsih: Software error (Failed to alloc memory) | ||
| NTF scsiLsiEvent127 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13127 | mptscsih: Software error (PCI-MSI enabled) | ||
| NTF scsiLsiEvent128 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13128 | mptscsih: Software error (host page buffers free failed) | ||
| NTF scsiLsiEvent129 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13129 | mptscsih: Adapter error (Sending IOCInit failed) | ||
| NTF scsiLsiEvent130 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13130 | mptscsih: Adapter error (Sending PortEnable failed) | ||
| NTF scsiLsiEvent133 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13133 | mptscsih: Software error (Received a mf that was already freed) | ||
| NTF scsiLsiEvent134 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13134 | mptscsih: Adapter error (target reset) | ||
| NTF scsiLsiEvent135 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13135 | mptscsih: Adapter error (bus reset) | ||
| NTF scsiLsiEvent136 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13136 | mptscsih: Device error (Received a mf that was already freed) | ||
| NTF scsiLsiEvent137 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13137 | mptscsih: Adapter error (mpt_turbo_reply: Invalid cb_idx) | ||
| NTF scsiLsiEvent138 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13138 | mptscsih: Adapter error (mpt_reply: Invalid cb_idx) | ||
| NTF scsiLsiEvent139 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13139 | mptscsih: Adapter error (LogInfo) | ||
| NTF scsiLsiEvent140 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13140 | mptscsih: Adapter error (Skipping because it's not operational) | ||
| NTF scsiLsiEvent141 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13141 | mptscsih: Adapter error (Skipping because it's disabled) | ||
| NTF scsiLsiEvent142 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13142 | mptscsih: Adapter error (Skipping because SCSI Initiator mode is NOT enabled) | ||
| NTF scsiLsiEvent143 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13143 | mptscsih: Software error (Unable to register controller with SCSI subsystem) | ||
| NTF scsiLsiEvent144 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13144 | mptscsih: Software error (F/W Response) | ||
| NTF scsiLsiEvent145 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13145 | mptscsih: Software error (no msg frames) | ||
| NTF scsiLsiEvent146 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13146 | mptscsih: Adapter error (operation failed) | ||
| NTF scsiLsiEvent147 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13147 | mptscsih: Adapter error (Controller disabled) | ||
| NTF scsiLsiEvent148 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13148 | mptscsih: Adapter error (reset failed) | ||
| NTF scsiLsiEvent149 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13149 | mptscsih: Software error (Failed to register with Fusion MPT base driver) | ||
| NTF scsiLsiEvent150 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13150 | mptscsih: Software error (slave_alloc kzalloc failed) | ||
| NTF scsiLsiEvent151 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13151 | mptscsih: Software error (dma_alloc_coherent for parameters failed) | ||
| NTF scsiLsiEvent152 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13152 | mptscsih: Software error (mpt_config failed) | ||
| NTF scsiLsiEvent153 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13153 | mptscsih: Adapter error (readl: detects master abort) | ||
| NTF scsiLsiEvent154 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13154 | mptscsih: Software error (mptscsih_slave_destroy is NULL) | ||
| NTF scsiLsiEvent155 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13155 | mptscsih: Software error (mptsas_hotplug_print: Notified id is invalid) | ||
| NTF scsiLsiEvent156 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13156 | mptscsih: Software error (mptsas_remove_target: Notified id is invalid) | ||
| NTF scsiLsiEvent157 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13157 | mptscsih: Software error (mptsas_add_device: Notified id is invalid) | ||
| NTF scsiLsiEvent158 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13158 | mptscsih: Software error (mptsas_scan_target: Notified id is invalid) | ||
| NTF scsiLsiEvent159 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13159 | mptscsih: Software error (mptsas_hotplug_work: Notified id is invalid) | ||
| NTF scsiLsiEvent160 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13160 | mptscsih: Software error (Target Bus out of bounds) | ||
| NTF scsiLsiEvent161 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13161 | mptscsih: Adapter error (IOC Not operational) | ||
| NTF scsiLsiEvent162 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13162 | mptscsih: Adapter error (HardReset FAILED!!) | ||
| NTF scsiLsiEvent163 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13163 | mptscsih: Adapter error (ioc_state: DOORBELL_ACTIVE) | ||
| NTF scsiLsiEvent164 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13164 | mptscsih: Software error (lost hotplug event) | ||
| NTF scsiLsiEvent165 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13165 | mptscsih: Adapter error (mpt_turbo_reply: Invalid REPLY_TYPE) | ||
| NTF scsiLsiEvent166 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13166 | mptscsih: Adapter error (IOCStatus) | ||
| NTF scsiLsiEvent167 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13167 | mptscsih: Adapter error (LogInfo) | ||
| NTF scsiLsiEvent168 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13168 | mptscsih: Software error (Unable to allocate memory) | ||
| NTF scsiLsiEvent169 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13169 | mptscsih: Software error (Unable to copy mpt_fw) | ||
| NTF scsiLsiEvent170 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13170 | mptscsih: Software error (Target_List=NULL) | ||
| NTF scsiLsiEvent171 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13171 | mptscsih: Adapter error (HardResetHandler FAILED!!) | ||
| NTF scsiLsiEvent172 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13172 | mptscsih: Adapter or Software error (Invalid channel) | ||
| NTF scsiLsiEvent173 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13173 | mptscsih: Adapter error (no suitable DMA mask) | ||
| NTF scsiLsiEvent174 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13174 | mptscsih: Software error (Adapter not found!) | ||
| NTF scsiLsiEvent175 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13175 | mptscsih: Software error (Adapter not found!) | ||
| NTF scsiLsiEvent176 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13176 | mptscsih: Adapter error (HardReset FAILED!!) | ||
| NTF scsiLsiEvent177 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13177 | mptscsih: Adapter error (reset failed) | ||
| NTF scsiLsiEvent178 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13178 | mptscsih: Adapter error (DVCmdTimer_expired: HardReset FAILED!) | ||
| NTF scsiLsiEvent179 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13179 | mptscsih: Software error (pciras_readl(); recovered pci parity error with retry) | ||
| NTF scsiLsiEvent180 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13180 | mptscsih: Software error (pciras_writel(); recovered pci parity error with retry) | ||
| NTF scsiLsiEvent181 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13181 | mptscsih: Adapter error (mpt_fault_reset_work: HardReset) | ||
| NTF scsiLsiEvent182 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13182 | mptscsih: Adapter error (IOC is in FAULT state after reset) | ||
| NTF scsiLsiEvent183 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13183 | mptscsih: Adapter error (pci_enable_device: failed) | ||
| NTF scsiLsiEvent184 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13184 | mptscsih: Adapter error (firmware upload failure!) | ||
| NTF scsiLsiEvent185 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13185 | mptscsih: Adapter error (firmware downloadboot failure) | ||
| NTF scsiLsiEvent186 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13186 | mptscsih: Adapter error (host page buffers free failed) | ||
| NTF scsiLsiEvent187 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13187 | mptscsih: Adapter error (Firmware Reload FAILED) | ||
| NTF scsiLsiEvent188 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13188 | mptscsih: Adapter error (pci_enable_device_mem() failed) | ||
| NTF scsiLsiEvent189 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13189 | mptscsih: Software error (failed setting 35 bit addressing for Request/Reply/Chain and Sense Buffers) | ||
| NTF scsiLsiEvent190 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13190 | mptscsih: Adapter error (adapter_reset retry exhausted; stop reset operation) | ||
| NTF scsiLsiEvent191 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13191 | mptscsih: Adapter error (adapter_reset failed) | ||
| NTF scsiLsiEvent192 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13192 | mptscsih: Adapter error (IOC msg unit reset failed to put ioc in ready state) | ||
| NTF scsiLsiEvent193 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13193 | mptscsih: Adapter error (Errata on LSI53C1030 occurred) | ||
| NTF scsiLsiEvent194 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13194 | mptscsih: Device error (target reset failed) | ||
| NTF scsiLsiEvent195 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13195 | mptscsih:Adapter error (IOC Not operational) | ||
| NTF scsiLsiEvent196 | 1.3.6.1.4.1.211.1.31.1.2.201.7.0.13196 | mptscsih: Adapter error (Issuing HardReset) | ||
| psaLinScsiComTrap | 1.3.6.1.4.1.211.1.31.1.2.201.8 | |||
| psaLinGrmpdTrap | 1.3.6.1.4.1.211.1.31.1.2.201.9 | |||
| psaLinGdsTrap | 1.3.6.1.4.1.211.1.31.1.2.201.10 | |||
| psaLinGlsTrap | 1.3.6.1.4.1.211.1.31.1.2.201.11 | |||
| psaLinTg3Trap | 1.3.6.1.4.1.211.1.31.1.2.201.12 | |||
| psaLinIbTrap | 1.3.6.1.4.1.211.1.31.1.2.201.13 | |||
| psaLinXframe2Trap | 1.3.6.1.4.1.211.1.31.1.2.201.14 | |||
| psaGschTrap | 1.3.6.1.4.1.211.1.31.1.2.201.15 | |||
| psaLinIntelE1000ETrap | 1.3.6.1.4.1.211.1.31.1.2.201.16 | |||
| psaLinIntelIgbTrap | 1.3.6.1.4.1.211.1.31.1.2.201.17 | |||
| psaLinSvsRaidTrap | 1.3.6.1.4.1.211.1.31.1.2.201.18 | |||
| psaExternalFileUnitTrap | 1.3.6.1.4.1.211.1.31.1.2.201.101 |
RFC description
A Periplex Systems, Inc. proprietary MIB for LSI Logic trap definitions. Provides SNMP trap support for LSI Logic RAID controllers and storage management agents.
Start monitoring Fujitsu PRIMEQUEST server partition, Linux, LSI Logic SCSI/SAS controller (driver fault traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.