PSA-WIN-MIB

All MIBs › PSA-WIN-MIB

Category: Server Hardware Monitoring

Description: Defines NEC ESMPRO ServerAgents Windows platform base OID structure for server hardware monitoring on Windows systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PSA-WIN-MIB?

PSA-WIN-MIB is a private proprietary MIB (enterprise OID 211) reporting Windows-host partition resource and network-interface inventory. Its objects cover logical CPU count, large memory/swap size, and a network-interface table (index, MAC/IP address, interface name, speed, subnet mask, network/bus type, segment/bus/device number, function, status, inbound/outbound IP packet counts, device name, link status, physical ID, secondary IP address). As a hardware/performance MIB it lets an administrator confirm CPU/memory allocation and per-NIC link status and traffic on a monitored Windows partition. It is deployed on Windows-based systems implementing this private MIB. Engineers can download the PSA-WIN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PSA-WIN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu PRIMEQUEST server partition running Windows (ESMPRO ServerAgent CPU/memory/NIC inventory)

Monitoring Examples

An administrator checks winNILinkStatus and winNIIpPacketsIn to confirm network interface health on a monitored Windows partition.

What Can Be Monitored

partition CPU/memory allocation and per-NIC status

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
mgmt

From RFC1213-MIB

DisplayString
PhysAddress
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
fujitsu	1.3.6.1.4.1.211
iaServer	1.3.6.1.4.1.211.1.31
logicalComponentForLinux	1.3.6.1.4.1.211.1.31.1.2.100.2
logicalComponentForWindows	1.3.6.1.4.1.211.1.31.1.2.100.3
monitoringFunction	1.3.6.1.4.1.211.1.31.1.2.100.4
otherFunction	1.3.6.1.4.1.211.1.31.1.2.100.7
partition	1.3.6.1.4.1.211.1.31.1.2
partitionCommon	1.3.6.1.4.1.211.1.31.1.2.100
physicalComponent	1.3.6.1.4.1.211.1.31.1.2.100.1
primequest	1.3.6.1.4.1.211.1.31.1
products	1.3.6.1.4.1.211.1
pxFunction	1.3.6.1.4.1.211.1.31.1.2.100.8
statusFunction	1.3.6.1.4.1.211.1.31.1.2.100.6
thresholdFunction	1.3.6.1.4.1.211.1.31.1.2.100.5
winHardwareResourceEntry	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1		not-accessible
winHardwareResourceInfo	1.3.6.1.4.1.211.1.31.1.2.100.3.5
winHardwareResourceTable	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1		not-accessible
STR winHWRAdapterName	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.9	DisplayString	read-only	Adapter name id of the device.
INT winHWRBusNumber	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.3	INTEGER	read-only	Bus number of the device.
INT winHWRBusType	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.1	INTEGER	read-only	Bus type of the device. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci
OCT winHWRClass	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.11	OCTET STRING	read-only	Device classification; according to the PCI classification scheme. Byte Contents 0 BaseClass 1 SubClass 2 ProgIf
INT winHWRDeviceNumber	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.4	INTEGER	read-only	Device number of the device.
INT winHWRFunction	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.5	INTEGER	read-only	Function number of the device.
STR winHWRIoPort	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.8	DisplayString	read-only	I/O port area used the device.
INT winHWRIRQ	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.7	INTEGER	read-only	Interrupt number used the device.
STR winHWRMemArea	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.6	DisplayString	read-only	Memory area used the device.
INT winHWRSegment	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.2	INTEGER	read-only	Segment number of the device.
STR winHWRVendor	1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.10	DisplayString	read-only	Vendor id of the device.
winIPv6NetworkInterfaceEntry	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1		not-accessible
winIPv6NetworkInterfaceTable	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2		not-accessible	Table with IPv6 network interface information.
INT winIPv6NIBusNumber	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.13	INTEGER	read-only	Bus number of the IPv6 network interface.
INT winIPv6NIBusType	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.11	INTEGER	read-only	Bus type of the IPv6 network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci
INT winIPv6NIDADStatus	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.9	INTEGER	read-only	IPv6 network interface DAD Status. Refer to the following definitions; value contents 0 The DAD state is invalid 1 The DAD state is tentative 2 A duplicate IP address has been detected 3 The IP address has been deprecated 4 The IP address is the preferred address
INT winIPv6NIDeviceNumber	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.14	INTEGER	read-only	Device number of the IPv6 network interface.
INT winIPv6NIFunction	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.15	INTEGER	read-only	Function number of the IPv6 network interface.
INT winIPv6NIIndex	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.1	INTEGER	read-only	IPv6 Network inteface identification number.
STR winIPv6NIInterfaceName	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.5	DisplayString	read-only	IPv6 Network interface name.(e.g.eth0).
OCT winIPv6NIIPAddress	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.3	OCTET STRING	read-only	IPv6 address of the network interface. This object returns IPv6 address of 16 bytes binary data.
STR winIPv6NIIPAddress2	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.4	DisplayString	read-only	IPv6 address of the network interface. This object returns IPv6 address of text string format
CTR winIPv6NIIpPacketsIn	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.17	Counter	read-only
CTR winIPv6NIIpPacketsOut	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.18	Counter	read-only
INT winIPv6NIlinkStatus	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.19	INTEGER	read-only	The current link state of the IPv6 interface. If 0; link status is unknown.
PHY winIPv6NIMACAddress	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.2	PhysAddress	read-only	The interface address of the physical layer of the IPv6 network.
INT winIPv6NINetworkType	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.10	INTEGER	read-only	IPv6 network interface type. The network type definition are assigned by the IANA.
STR winIPv6NIPhysicalID	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.20	DisplayString	read-only	Identification name of IPv6 network interface cand.
INT winIPv6NIPrefix	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.7	INTEGER	read-only	IPv6 network interface prefix
INT winIPv6NIScope	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.8	INTEGER	read-only	IPv6 network interface scope. Refer to the following definitions; value contents 0 global 16 loopback 32 link 64 site
INT winIPv6NISegment	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.12	INTEGER	read-only	Segment number of the IPv6 network interface.
INT winIPv6NISpeed	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.6	INTEGER	read-only	IPv6 Network speed.(unit:Mbit/s)
INT winIPv6NIStatus	1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.16	INTEGER	read-only	The current operational state of the IPv6 interface. The testing(3) state indicates that no operational packets can be passed.
INT winLgMemSize	1.3.6.1.4.1.211.1.31.1.2.100.3.2.1	INTEGER	read-only	Memory size of the partition.(unit:Mbyte)
INT winLgMemSwapSize	1.3.6.1.4.1.211.1.31.1.2.100.3.2.2	INTEGER	read-only	Swap size of the partition.(unit:Mbyte)
winLogicalCpuInfo	1.3.6.1.4.1.211.1.31.1.2.100.3.1
winLogicalMemoryInfo	1.3.6.1.4.1.211.1.31.1.2.100.3.2
winNetworkInfo	1.3.6.1.4.1.211.1.31.1.2.100.3.4
winNetworkInterfaceEntry	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1		not-accessible
winNetworkInterfaceTable	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1		not-accessible	Table with network interface information.
INT winNIBusNumber	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.10	INTEGER	read-only	Bus number of the network interface.
INT winNIBusType	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.8	INTEGER	read-only	Bus type of the network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci
STR winNIDeviceName	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.16	DisplayString	read-only	Device name of the network interface.
INT winNIDeviceNumber	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.11	INTEGER	read-only	Device number of the network interface.
INT winNIFunction	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.12	INTEGER	read-only	Function number of the network interface.
INT winNIIndex	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.1	INTEGER	read-only	Network inteface identification number.
STR winNIInterfaceName	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.4	DisplayString	read-only	Network interface name.(e.g.eth0).
OCT winNIIPAddress	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.3	OCTET STRING	read-only	IP address of the network interface.
STR winNIIPAddress2	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.19	DisplayString	read-only	IP address of the network interface. Please use this object instead of 'winNIIPAddress'.
CTR winNIIpPacketsIn	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.14	Counter	read-only
CTR winNIIpPacketsOut	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.15	Counter	read-only
INT winNILinkStatus	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.17	INTEGER	read-only	The current link state of the interface. If 0; link status is unknown.
PHY winNIMACAddress	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.2	PhysAddress	read-only	The interface address of the physical layer of the network.
INT winNINetworkType	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.7	INTEGER	read-only	Network interface type. The network type definition are assigned by the IANA.
STR winNIPhysicalID	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.18	DisplayString	read-only	Identification name of Network Interface cand.
INT winNISegment	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.9	INTEGER	read-only	Segment number of the network interface.
INT winNISpeed	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.5	INTEGER	read-only	Network speed.(unit:Mbit/s)
INT winNIStatus	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.13	INTEGER	read-only	The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
OCT winNISubNetMask	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.6	OCTET STRING	read-only	Subnet address of the network interface.
STR winNISubNetMask2	1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.20	DisplayString	read-only	Subnet address of the network interface. Please use this object instead of 'winNISubNetMask'.
INT winNumOfLogicalCpus	1.3.6.1.4.1.211.1.31.1.2.100.3.1.6	INTEGER	read-only	Number of effective logical CPUs in the partition.
winOperatingSystemInfo	1.3.6.1.4.1.211.1.31.1.2.100.3.6
INT winOSAverageUsageRate	1.3.6.1.4.1.211.1.31.1.2.100.3.6.6	INTEGER	read-only	The average system usage rate over all processors since startup.(unit:%)
INT winOSCharactorCode	1.3.6.1.4.1.211.1.31.1.2.100.3.6.10	INTEGER	read-only	System charactor code.This value is the Code-page indentifiers.
INT winOSCurrentSession	1.3.6.1.4.1.211.1.31.1.2.100.3.6.5	INTEGER	read-only	Number of current session.
STR winOSName	1.3.6.1.4.1.211.1.31.1.2.100.3.6.1	DisplayString	read-only	Operating system name that running on the partition.
CTR winOSRunTime	1.3.6.1.4.1.211.1.31.1.2.100.3.6.3	Counter	read-only	Current partition up time.(unit:sec)
STR winOSServicePack	1.3.6.1.4.1.211.1.31.1.2.100.3.6.9	DisplayString	read-only	Service pack.
STR winOSSystemTime	1.3.6.1.4.1.211.1.31.1.2.100.3.6.4	DisplayString	read-only	Current date and time as visible string.
STR winOSVersion	1.3.6.1.4.1.211.1.31.1.2.100.3.6.2	DisplayString	read-only	Operating system version that running on the partition.

RFC description

PSA (likely Print System Architecture or similar) Windows-based management MIB; vendor-private.

Start monitoring Fujitsu PRIMEQUEST server partition running Windows (ESMPRO ServerAgent CPU/memory/NIC inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PSA-WIN-MIB

What Is PSA-WIN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description