PRVT-STATISTICSHISTORY-MIB

All MIBs › PRVT-STATISTICSHISTORY-MIB

Organization: BATM Advanced Communication

Last Updated: 2010-02-03

Category: Performance Monitoring

Description: Provides BATM Advanced Communication statistics history archive for long-term trend analysis of port and protocol counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-STATISTICSHISTORY-MIB?

PRVT-STATISTICSHISTORY-MIB is a BATM Advanced Communication proprietary MIB implementing historical traffic-statistics snapshotting on BATM/Telco Systems carrier Ethernet switches. Its objects cover a global admin status, get/write intervals, and storage path, a per-interface configuration table (admin status) and a daily-snapshot configuration (admin status, get/write interval, path), and a data table reporting, per interval, inbound/outbound packet and bits-per-second rates averaged over the last 5 seconds, 1 minute, and 5 minutes. As a performance MIB it lets an administrator review recent short-term traffic-rate history per interface without needing an external NMS polling loop. It is deployed on BATM/Telco Systems carrier Ethernet switches. Engineers can download the PRVT-STATISTICSHISTORY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-STATISTICSHISTORY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM/Telco Systems carrier Ethernet switches

Monitoring Examples

An administrator reviews prvtStatHistLast5minInBps history to confirm whether a reported bandwidth spike on an interface was a brief burst or a sustained trend on a BATM switch.

What Can Be Monitored

short-term (5s/1min/5min) interface traffic-rate history

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From PRVT-SWITCH-MIB

switch

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TruthValue

How to Use in IPNetwork Monitor

Example using prvtStatHistLast5secInPkts OID:

Select a BATM/Telco Systems carrier Ethernet switch (historical traffic-rate snapshots) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type prvtStatHistLast5secInPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the value of last5secInPkts counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT prvtStatHistAdminStatus	1.3.6.1.4.1.738.1.5.140.1.1.1	INTEGER	read-write	Enables or disables statistics history feature globally. The default value is disabled.
INT prvtStatHistDailySnapshotAdminStatus	1.3.6.1.4.1.738.1.5.140.1.2.1	INTEGER	read-only	Shows if statistics history feature is globally enabled or disabled. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. Copied from configuration database when daily snapshot is created.
prvtStatHistDailySnapshotData	1.3.6.1.4.1.738.1.5.140.1.2
prvtStatHistDailySnapshotDataGroup	1.3.6.1.4.1.738.1.5.140.2.2.4			Objects for the global configuration group.
INT prvtStatHistDailySnapshotGetInterval	1.3.6.1.4.1.738.1.5.140.1.2.2	INTEGER	read-only	Statistics gathering interval. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. Copied from configuration database when daily snapshot is created.
STR prvtStatHistDailySnapshotPath	1.3.6.1.4.1.738.1.5.140.1.2.4	DisplayString	read-only	Directory where statistics history files should be stored. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. Copied from configuration database when daily snapshot is created. Format: [device/]path.
INT prvtStatHistDailySnapshotWriteInterval	1.3.6.1.4.1.738.1.5.140.1.2.3	INTEGER	read-only	Time when statistics history should be dumped to configured statistics file. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. Copied from configuration database when daily snapshot is created.
C32 prvtStatHistDot3StatsAlignmentErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.35	Counter32	read-only	Value of dot3StatsAlignmentErrors counter.
C32 prvtStatHistDot3StatsCarrierSenseErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.44	Counter32	read-only	Value of dot3StatsCarrierSenseErrors counter.
C32 prvtStatHistDot3StatsDeferredTransmissions	1.3.6.1.4.1.738.1.5.140.1.2.5.1.40	Counter32	read-only	Value of dot3StatsDeferredTransmissions counter.
C32 prvtStatHistDot3StatsExcessiveCollisions	1.3.6.1.4.1.738.1.5.140.1.2.5.1.42	Counter32	read-only	Value of dot3StatsExcessiveCollisions counter.
C32 prvtStatHistDot3StatsFCSErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.36	Counter32	read-only	Value of dot3StatsFCSErrors counter.
C32 prvtStatHistDot3StatsFrameTooLongs	1.3.6.1.4.1.738.1.5.140.1.2.5.1.45	Counter32	read-only	Value of dot3StatsFrameTooLongs counter.
C32 prvtStatHistDot3StatsInternalMacReceiveErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.46	Counter32	read-only	Value of dot3StatsInternalMacReceiveErrors counter.
C32 prvtStatHistDot3StatsInternalMacTransmitErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.43	Counter32	read-only	Value of dot3StatsInternalMacTransmitErrors counter.
C32 prvtStatHistDot3StatsLateCollisions	1.3.6.1.4.1.738.1.5.140.1.2.5.1.41	Counter32	read-only	Value of dot3StatsLateCollisions counter.
C32 prvtStatHistDot3StatsMultipleCollisionFrames	1.3.6.1.4.1.738.1.5.140.1.2.5.1.38	Counter32	read-only	Value of dot3StatsMultipleCollisionFrames counter.
C32 prvtStatHistDot3StatsSingleCollisionFrames	1.3.6.1.4.1.738.1.5.140.1.2.5.1.37	Counter32	read-only	Value of dot3StatsSingleCollisionFrames counter.
C32 prvtStatHistDot3StatsSQETestErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.39	Counter32	read-only	Value of dot3StatsSQETestErrors counter.
C32 prvtStatHistEtherStatsBroadcastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.16	Counter32	read-only	Value of etherStatsBroadcastPkts counter.
C32 prvtStatHistEtherStatsCollisions	1.3.6.1.4.1.738.1.5.140.1.2.5.1.23	Counter32	read-only	Value of etherStatsCollisions counter.
C32 prvtStatHistEtherStatsCRCAlignErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.18	Counter32	read-only	Value of etherStatsCRCAlignErrors counter.
C32 prvtStatHistEtherStatsDropEvents	1.3.6.1.4.1.738.1.5.140.1.2.5.1.14	Counter32	read-only	Value of etherStatsDropEvents counter.
C32 prvtStatHistEtherStatsDroppedFrames	1.3.6.1.4.1.738.1.5.140.1.2.5.1.24	Counter32	read-only	Value of etherStatsDroppedFrames counter.
C32 prvtStatHistEtherStatsFragments	1.3.6.1.4.1.738.1.5.140.1.2.5.1.21	Counter32	read-only	Value of etherStatsFragments counter.
C64 prvtStatHistEtherStatsHighCapacityOctets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.28	Counter64	read-only	Value of etherStatsHighCapacityOctets counter.
C32 prvtStatHistEtherStatsHighCapacityOverflowOctets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.26	Counter32	read-only	Value of etherStatsHighCapacityOverflowOctets counter.
C32 prvtStatHistEtherStatsHighCapacityOverflowPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.25	Counter32	read-only	Value of etherStatsHighCapacityOverflowPkts counter.
C64 prvtStatHistEtherStatsHighCapacityPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.27	Counter64	read-only	Value of etherStatsHighCapacityPkts counter.
C64 prvtStatHistEtherStatsHighCapacityPkts1024to1518Octets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.34	Counter64	read-only	Value of etherStatsHighCapacityPkts1024to1518Octets counter.
C64 prvtStatHistEtherStatsHighCapacityPkts128to255Octets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.31	Counter64	read-only	Value of etherStatsHighCapacityPkts128to255Octets counter.
C64 prvtStatHistEtherStatsHighCapacityPkts256to511Octets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.32	Counter64	read-only	Value of etherStatsHighCapacityPkts256to511Octets counter.
C64 prvtStatHistEtherStatsHighCapacityPkts512to1023Octets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.33	Counter64	read-only	Value of etherStatsHighCapacityPkts512to1023Octets counter.
C64 prvtStatHistEtherStatsHighCapacityPkts64Octets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.29	Counter64	read-only	Value of etherStatsHighCapacityPkts64Octets counter.
C64 prvtStatHistEtherStatsHighCapacityPkts65to127Octets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.30	Counter64	read-only	Value of etherStatsHighCapacityPkts65to127Octets counter.
C32 prvtStatHistEtherStatsJabbers	1.3.6.1.4.1.738.1.5.140.1.2.5.1.22	Counter32	read-only	Value of etherStatsJabbers counter.
C32 prvtStatHistEtherStatsMulticastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.17	Counter32	read-only	Value of etherStatsMulticastPkts counter.
C32 prvtStatHistEtherStatsOversizePkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.20	Counter32	read-only	Value of etherStatsOversizePkts counter.
C32 prvtStatHistEtherStatsPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.15	Counter32	read-only	Value of etherStatsPkts counter.
C32 prvtStatHistEtherStatsUndersizePkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.19	Counter32	read-only	Value of etherStatsUndersizePkts counter.
INT prvtStatHistGetInterval	1.3.6.1.4.1.738.1.5.140.1.1.2	INTEGER	read-write	Configures statistics gathering interval. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. The default value is 15 minutes.
C64 prvtStatHistIfHCInBroadcastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.55	Counter64	read-only	Value of prvtStatHistIfHCInBroadastPkts counter.
C64 prvtStatHistIfHCInMulticastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.54	Counter64	read-only	Value of ifHCInMulticastPkts counter.
C64 prvtStatHistIfHCInOctets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.52	Counter64	read-only	Value of ifHCInOctets counter.
C64 prvtStatHistIfHCInUcastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.53	Counter64	read-only	Value of ifHCInUcastPkts counter.
C64 prvtStatHistIfHCOutBroadcastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.59	Counter64	read-only	Value of ifHCOutBroadcastPkts counter.
C64 prvtStatHistIfHCOutMulticastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.58	Counter64	read-only	Value of ifHCOutMulticastPkts counter.
C64 prvtStatHistIfHCOutOctets	1.3.6.1.4.1.738.1.5.140.1.2.5.1.56	Counter64	read-only	Value of ifHCOutOctets counter.
C64 prvtStatHistIfHCOutUcastPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.57	Counter64	read-only	Value of ifHCOutUcastPkts counter.
C32 prvtStatHistIfInDiscards	1.3.6.1.4.1.738.1.5.140.1.2.5.1.47	Counter32	read-only	Value of ifInDiscards counter.
C32 prvtStatHistIfInErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.48	Counter32	read-only	Value of ifInErrors counter.
C32 prvtStatHistIfInUnknownProtos	1.3.6.1.4.1.738.1.5.140.1.2.5.1.49	Counter32	read-only	Value of ifInUnknownProtos counter.
C32 prvtStatHistIfOutDiscards	1.3.6.1.4.1.738.1.5.140.1.2.5.1.50	Counter32	read-only	Value of ifOutDiscards counter.
C32 prvtStatHistIfOutErrors	1.3.6.1.4.1.738.1.5.140.1.2.5.1.51	Counter32	read-only	Value of dot3StatsDeferredTransmissions counter.
INT prvtStatHistIntAdminStatus	1.3.6.1.4.1.738.1.5.140.1.1.5.1.1	INTEGER	read-write	Enables or disables statistics-history feature per interface.
U32 prvtStatHistInterval	1.3.6.1.4.1.738.1.5.140.1.2.5.1.1	Unsigned32	not-accessible	Number of statistics gathering interval. All valid and invalid gathering intervals are supported. Check prvtStatHistValidInterval if true/false.
C64 prvtStatHistLast1minInBps	1.3.6.1.4.1.738.1.5.140.1.2.5.1.9	Counter64	read-only	Value of last1minInBps counter.
C32 prvtStatHistLast1minInPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.3	Counter32	read-only	Value of last1minInPkts counter.
C64 prvtStatHistLast1minOutBps	1.3.6.1.4.1.738.1.5.140.1.2.5.1.12	Counter64	read-only	Value of last1minOutBps counter.
C32 prvtStatHistLast1minOutPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.6	Counter32	read-only	Value of last1minOutPkts counter.
C64 prvtStatHistLast5minInBps	1.3.6.1.4.1.738.1.5.140.1.2.5.1.10	Counter64	read-only	Value of last5minInBps counter.
C32 prvtStatHistLast5minInPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.4	Counter32	read-only	Value of last5minInPkts counter.
C64 prvtStatHistLast5minOutBps	1.3.6.1.4.1.738.1.5.140.1.2.5.1.13	Counter64	read-only	Value of last5minOutBps counter.
C32 prvtStatHistLast5minOutPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.7	Counter32	read-only	Value of last5minOutPkts counter.
C64 prvtStatHistLast5secInBps	1.3.6.1.4.1.738.1.5.140.1.2.5.1.8	Counter64	read-only	Value of last5secInBps counter.
C32 prvtStatHistLast5secInPktsEx	1.3.6.1.4.1.738.1.5.140.1.2.5.1.2	Counter32	read-only	Value of last5secInPkts counter.
C64 prvtStatHistLast5secOutBps	1.3.6.1.4.1.738.1.5.140.1.2.5.1.11	Counter64	read-only	Value of last5secOutBps counter.
C32 prvtStatHistLast5secOutPkts	1.3.6.1.4.1.738.1.5.140.1.2.5.1.5	Counter32	read-only	Value of last5secOutPkts counter.
STR prvtStatHistPath	1.3.6.1.4.1.738.1.5.140.1.1.4	DisplayString	read-write	Configures directory where statistics history files should be stored. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. The default value is '/var/stats'.
T/F prvtStatHistValidInterval	1.3.6.1.4.1.738.1.5.140.1.2.5.1.60	TruthValue	read-only	A boolean showing if the interval is valid.
INT prvtStatHistWriteInterval	1.3.6.1.4.1.738.1.5.140.1.1.3	INTEGER	read-write	Configures time when statistics history should be dumped to configured statistics file. If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. The default value is 1 hour.
prvtStatisticsHistoryCfg	1.3.6.1.4.1.738.1.5.140.1.1
prvtStatisticsHistoryCfgGroup	1.3.6.1.4.1.738.1.5.140.2.2.3			Objects for the global configuration group.
prvtStatisticsHistoryCompliance	1.3.6.1.4.1.738.1.5.140.2.1.1			The compliance statement for support of the statistics history MIB module.
prvtStatisticsHistoryCompliances	1.3.6.1.4.1.738.1.5.140.2.1
prvtStatisticsHistoryConformance	1.3.6.1.4.1.738.1.5.140.2
prvtStatisticsHistoryDataEntry	1.3.6.1.4.1.738.1.5.140.1.2.5.1		not-accessible	Statistics history information.
prvtStatisticsHistoryDataGroup	1.3.6.1.4.1.738.1.5.140.2.2.2			Objects for the Statistics History Data group.
prvtStatisticsHistoryDataTable	1.3.6.1.4.1.738.1.5.140.1.2.5		not-accessible	The table that show statistics history information.
prvtStatisticsHistoryGroups	1.3.6.1.4.1.738.1.5.140.2.2
prvtStatisticsHistoryIntCfgEntry	1.3.6.1.4.1.738.1.5.140.1.1.5.1		not-accessible	Statistics history configuration information for a particular port.
prvtStatisticsHistoryIntCfgGroup	1.3.6.1.4.1.738.1.5.140.2.2.1			Objects for the interface configuration group.
prvtStatisticsHistoryIntCfgTable	1.3.6.1.4.1.738.1.5.140.1.1.5		not-accessible	The table that controls statistics history configuration on individual ports.
prvtStatisticsHistoryMib	1.3.6.1.4.1.738.1.5.140			Management Information Base module for StatisticsHistory
prvtStatisticsHistoryNotifications	1.3.6.1.4.1.738.1.5.140.0
prvtStatisticsHistoryObjects	1.3.6.1.4.1.738.1.5.140.1

RFC description

Tracks Ethernet switch statistics history for BATM Advanced Communications devices.

Start monitoring BATM/Telco Systems carrier Ethernet switches (historical traffic-rate snapshots) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-STATISTICSHISTORY-MIB