All MIBs › PRVT-SAA-MIB
Organization: BATM Advanced Communication
Last Updated: 2014-05-16
Category: Performance Monitoring
Description: Manages BATM Advanced Communication Service Assurance Agent (SAA) test configuration for network performance measurement.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is PRVT-SAA-MIB?
PRVT-SAA-MIB is a vendor MIB from BATM Advanced Communication implementing a Service Assurance Agent (SAA) for configuring and running OAM and performance measurement tests, including ITU-T Y.1731 and RFC 2544 style tests. It exposes profile-based test configuration objects specifying test type and performance thresholds for delay, jitter, and frame loss in both near-end and far-end directions. Its monitoring value is centered on network performance/software status: it lets an operator provision synthetic tests and then read back measured delay, jitter, and frame loss to detect service-level degradation on a monitored path, which is a proxy for underlying link or device health. It builds on the ITU-T Y.1731 and IETF RFC 2544 measurement standards for its test methodologies. It is deployed on BATM Advanced Communication carrier Ethernet equipment used to provide SLA-monitored services. Engineers can download the PRVT-SAA-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-SAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- BATM Advanced Communication carrier Ethernet equipment
Monitoring Examples
An admin would configure prvtSaaProfileTable/prvtSaaProfileEntry with a prvtSaaProfileType of Y.1731 or RFC 2544 and then monitor prvtSaaProfileY1731DelayNearEnd/prvtSaaProfileY1731DelayFarEnd and prvtSaaProfileY1731JitterNearEnd/prvtSaaProfileY1731JitterFarEnd for a given prvtSaaProfileName. A sudden rise in prvtSaaProfileY1731FrameLossNearEnd or prvtSaaProfileRfc2544FrameLoss would indicate the monitored service path is experiencing packet loss, pointing to congestion or a failing link segment. Comparing near-end versus far-end delay/jitter values helps localize which direction of the path is degraded.
What Can Be Monitored
- Y.1731 delay (near/far end)
- Y.1731 jitter (near/far end)
- Y.1731 frame loss (near/far end)
- RFC 2544 frame loss
- SAA test profile status
This MIB depends on
Related MIBs
Imported Objects
From PRVT-SWITCH-MIB
| switch | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| prvtSaaMIB | 1.3.6.1.4.1.738.1.5.130 | This MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. | ||
| prvtSaaNotifications | 1.3.6.1.4.1.738.1.5.130.0 | |||
| NTF prvtSaaRfc2544ProbeFailed | 1.3.6.1.4.1.738.1.5.130.0.1 | This trap should be sent whenever a SAA probe on a specific test fails. | ||
| NTF prvtSaaRfc2544ProbeSuccess | 1.3.6.1.4.1.738.1.5.130.0.2 | This trap should be sent whenever a SAA probe on a specific test finishes with success. | ||
| NTF prvtSaaTestRfc2544Finished | 1.3.6.1.4.1.738.1.5.130.0.3 | This trap should be sent whenever a SAA RFC2544 test is finished | ||
| NTF prvtSaaY1731DelayNearEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.4 | This trap should be sent whenever the near end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731DelayFarEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.5 | This trap should be sent whenever the far end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731JitterNearEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.6 | This trap should be sent whenever the near end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731JitterFarEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.7 | This trap should be sent whenever the far end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731FrLossNearEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.8 | This trap should be sent whenever the near end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731FrLossFEThreshold | 1.3.6.1.4.1.738.1.5.130.0.9 | This trap should be sent whenever the far end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1564ProbeFailed | 1.3.6.1.4.1.738.1.5.130.0.10 | This trap should be sent whenever a SAA probe on a specific test step fails. | ||
| NTF prvtSaaY1564ProbeSuccess | 1.3.6.1.4.1.738.1.5.130.0.11 | This trap should be sent whenever a SAA probe on a specific test step finishes with success. | ||
| NTF prvtSaaY1564TestFinished | 1.3.6.1.4.1.738.1.5.130.0.12 | This trap should be sent whenever a SAA Y1564 test is finished | ||
| NTF prvtSaaY1564DelayThreshold | 1.3.6.1.4.1.738.1.5.130.0.13 | This trap should be sent whenever a delay on a SAA Y1564 test will surpass the defined threshold. | ||
| NTF prvtSaaY1564FramelossThreshold | 1.3.6.1.4.1.738.1.5.130.0.14 | This trap should be sent whenever a frameloss on a SAA Y1564 test will surpass the defined threshold. | ||
| NTF prvtSaaY1731slmDelayNearEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.15 | This trap should be sent whenever the near end delay on a SAA Y1731 SLM test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731slmDelayFarEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.16 | This trap should be sent whenever the far end delay on a SAA Y1731 SLM test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731slmJitterNearEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.17 | This trap should be sent whenever the near end jitter on a SAA Y1731 SLM test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731slmJitterFarEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.18 | This trap should be sent whenever the far end jitter on a SAA Y1731 SLM test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731slmFramelossNearEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.19 | This trap should be sent whenever the near end frameloss on a SAA Y1731 SLM test will surpass one of the 2 defined thresholds. | ||
| NTF prvtSaaY1731slmFramelossFarEndThreshold | 1.3.6.1.4.1.738.1.5.130.0.20 | This trap should be sent whenever the far end frameloss on a SAA Y1731 SLM test will surpass one of the 2 defined thresholds. | ||
| prvtSaaObjects | 1.3.6.1.4.1.738.1.5.130.1 | |||
| prvtSaaProfiles | 1.3.6.1.4.1.738.1.5.130.1.1 | |||
| prvtSaaProfileTable | 1.3.6.1.4.1.738.1.5.130.1.1.1 | not-accessible | Table contains SAA thresholds. | |
| prvtSaaProfileEntry | 1.3.6.1.4.1.738.1.5.130.1.1.1.1 | not-accessible | Entry in prvtSaaProfileTable | |
| PRV prvtSaaProfileName | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.1 | PrvtSaaNameType | not-accessible | SAA profile table index. |
| ROW prvtSaaProfileRowStatus | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.2 | RowStatus | read-create | Creation/delete/edit of the SAA profile. |
| INT prvtSaaProfileType | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.3 | INTEGER | read-create | Specify profile type. |
| U32 prvtSaaProfileY1731DelayNearEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.4 | Unsigned32 | read-create | Near end delay in microseconds |
| U32 prvtSaaProfileY1731DelayFarEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.5 | Unsigned32 | read-create | Far end delay in microseconds |
| U32 prvtSaaProfileY1731JitterNearEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.6 | Unsigned32 | read-create | Near end jitter in microseconds |
| U32 prvtSaaProfileY1731JitterFarEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.7 | Unsigned32 | read-create | Far end jitter in microseconds |
| U32 prvtSaaProfileY1731FrameLossNearEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.8 | Unsigned32 | read-create | Near end frame-loss measured in 0.001 of percent |
| U32 prvtSaaProfileY1731FrameLossFarEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.9 | Unsigned32 | read-create | Far end frame-loss measured in 0.001 of percent |
| U32 prvtSaaProfileRfc2544FrameLoss | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.10 | Unsigned32 | read-create | Specify maximum frameloss to declare test succeeded |
| U32 prvtSaaProfileY1564FrameLoss | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.11 | Unsigned32 | read-create | Specify maximum frameloss to declare test succeeded |
| U32 prvtSaaProfileY1564FrameDelay | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.12 | Unsigned32 | read-create | Specify delay in microseconds |
| U32 prvtSaaProfileY1731SlmDelayNearEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.13 | Unsigned32 | read-create | Near end delay in microseconds |
| U32 prvtSaaProfileY1731SlmDelayFarEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.14 | Unsigned32 | read-create | Far end delay in microseconds |
| U32 prvtSaaProfileY1731SlmJitterNearEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.15 | Unsigned32 | read-create | Near end jitter in microseconds |
| U32 prvtSaaProfileY1731SlmJitterFarEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.16 | Unsigned32 | read-create | Far end jitter in microseconds |
| U32 prvtSaaProfileY1731SlmFrameLossNearEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.17 | Unsigned32 | read-create | Near end frame-loss measured in 0.001 of percent |
| U32 prvtSaaProfileY1731SlmFrameLossFarEnd | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.18 | Unsigned32 | read-create | Far end frame-loss measured in 0.001 of percent |
| prvtSaaTest | 1.3.6.1.4.1.738.1.5.130.1.2 | |||
| prvtSaaTestTable | 1.3.6.1.4.1.738.1.5.130.1.2.1 | not-accessible | This table holds the configuration for a SAA test | |
| prvtSaaTestEntry | 1.3.6.1.4.1.738.1.5.130.1.2.1.1 | not-accessible | Entry in prvtSaaTestTable | |
| PRV prvtSaaTestName | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.1 | PrvtSaaNameType | not-accessible | This string is used to describe the test name for the Y1731 Pm SAA test. It is also used as a test identifier. |
| PRV prvtSaaTestOwner | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.2 | PrvtSaaNameType | not-accessible | This string is used to describe the owner of the Y1731 Pm SAA test. |
| ROW prvtSaaTestRowStatus | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.3 | RowStatus | read-create | RowStatus |
| INT prvtSaaTestType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.4 | INTEGER | read-create | SAA test type. Test y1564 is not supported yet. |
| PRV prvtSaaTestProfile | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.5 | PrvtSaaNameType | read-create | Specify test profile |
| T/F prvtSaaTestEnable | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.6 | TruthValue | read-create | SAA Y1731 Pm test execution status. |
| INT prvtSaaTestStatus | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.7 | INTEGER | read-only | Operational status of the SAA test |
| INT prvtSaaTestY1731Mode | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.8 | INTEGER | read-create | Specify test Y1731 mode |
| OCT prvtSaaTestY1731Domain | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.9 | OCTET STRING | read-create | Specify Y1731 domain level |
| OCT prvtSaaTestY1731MA | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.10 | OCTET STRING | read-create | Specify Y1731 cfm ma |
| U32 prvtSaaTestY1731Mep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.12 | Unsigned32 | read-create | Specify mep id |
| INT prvtSaaTestY1731TargetType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.13 | INTEGER | read-create | The target type of the remote device |
| MAC prvtSaaTestY1731TargetMac | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.14 | MacAddress | read-create | The MAC address of the remote device |
| U32 prvtSaaTestY1731TargetMep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.15 | Unsigned32 | read-create | The MAC address of the remote device |
| U32 prvtSaaTestY1731Priority | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.16 | Unsigned32 | read-create | Specify packet priority |
| U32 prvtSaaTestY1731Frequency | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.17 | Unsigned32 | read-create | Specify frequency of repetition |
| U32 prvtSaaTestY1731Interval | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.18 | Unsigned32 | read-create | Specify interval, in seconds |
| U32 prvtSaaTestY1731Period | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.19 | Unsigned32 | read-create | Specify period, in milliseconds |
| U32 prvtSaaTestY1731Timeout | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.20 | Unsigned32 | read-create | Define the timeout interval for each packet, in seconds |
| INT prvtSaaTestY1731Function | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.21 | INTEGER | read-create | Specify test functions |
| INT prvtSaaTestY1731DelayMethod | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.23 | INTEGER | read-create | Specify delay calculation method |
| U32 prvtSaaTestY1731DelayPValue | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.24 | Unsigned32 | read-create | Specify delay p value |
| INT prvtSaaTestY1731JitterMethod | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.25 | INTEGER | read-create | Specify jitter calculation method |
| U32 prvtSaaTestY1731JitterPValue | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.26 | Unsigned32 | read-create | Specify jitter p value |
| U32 prvtSaaTestY1731History | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.27 | Unsigned32 | read-create | Specify number of last stored probes |
| INT prvtSaaTestRfc2544Mode | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.28 | INTEGER | read-create | Specify test mode |
| OCT prvtSaaTestRfc2544Domain | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.29 | OCTET STRING | read-create | Specifty CFM Domain id |
| OCT prvtSaaTestRfc2544MA | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.30 | OCTET STRING | read-create | Specifty CFM MA name |
| U32 prvtSaaTestRfc2544Mep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.31 | Unsigned32 | read-create | Specify CFM source MEP |
| INT prvtSaaTestRfc2544TargetType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.32 | INTEGER | read-create | Specify target type |
| MAC prvtSaaTestRfc2544TargetMac | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.33 | MacAddress | read-create | Specify target MAC address |
| U32 prvtSaaTestRfc2544TargetMep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.34 | Unsigned32 | read-create | Specify target MEP |
| U32 prvtSaaTestRfc2544Cir | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.35 | Unsigned32 | read-create | Specify Committed Information Rate |
| U32 prvtSaaTestRfc2544Cbs | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.36 | Unsigned32 | read-create | Specify Committed Burst Size |
| U32 prvtSaaTestRfc2544BurstPercentage | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.37 | Unsigned32 | read-create | Specify burst percentage |
| U32 prvtSaaTestRfc2544Duration | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.38 | Unsigned32 | read-create | Specify duration, in seconds |
| INT prvtSaaTestRfc2544Pattern | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.39 | INTEGER | read-create | Specify pattern type |
| INT prvtSaaTestRfc2544LoopbackType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.40 | INTEGER | read-create | Specify loopback type |
| U32 prvtSaaTestRfc2544CVlan | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.41 | Unsigned32 | read-create | Specify C-VLAN |
| U32 prvtSaaTestRfc2544CVlanPriority | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.42 | Unsigned32 | read-create | Specify C-VLAN priority |
| T/F prvtSaaTestRfc2544CVlanDropEligible | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.43 | TruthValue | read-create | Specify C-VLAN drop eligible |
| U32 prvtSaaTestRfc2544SVlanPriority | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.44 | Unsigned32 | read-create | Specify S-VLAN priority |
| T/F prvtSaaTestRfc2544SVlanDropEligible | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.45 | TruthValue | read-create | Specify S-VLAN drop eligible |
| U32 prvtSaaTestRfc2544Timeout | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.46 | Unsigned32 | read-create | The timeout interval for the test packet, in x100 milliseconds |
| U32 prvtSaaTestRfc2544ResultAckTimeout | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.47 | Unsigned32 | read-create | The time the test-head waits for an inform acknowledgment from the test-tail, in seconds |
| INT prvtSaaTestY1564Mode | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.48 | INTEGER | read-create | Specify SAA Y1564 test mode |
| OCT prvtSaaTestY1564Domain | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.49 | OCTET STRING | read-create | Specifty CFM Domain id |
| OCT prvtSaaTestY1564Ma | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.50 | OCTET STRING | read-create | Specifty CFM MA name |
| U32 prvtSaaTestY1564Mep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.51 | Unsigned32 | read-create | Specify CFM source MEP |
| INT prvtSaaTestY1564Function | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.52 | INTEGER | read-create | Specify SAA Y1564 test function |
| U32 prvtSaaTestY1564CVlan | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.53 | Unsigned32 | read-create | Specify C-VLAN |
| U32 prvtSaaTestY1564CVlanPriority | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.54 | Unsigned32 | read-create | Specify C-VLAN priority |
| T/F prvtSaaTestY1564CVlanDropEligible | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.55 | TruthValue | read-create | Specify C-VLAN drop eligible |
| U32 prvtSaaTestY1564SVlanPriority | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.56 | Unsigned32 | read-create | Specify S-VLAN priority |
| T/F prvtSaaTestY1564SVlanDropEligible | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.57 | TruthValue | read-create | Specify S-VLAN drop eligible |
| INT prvtSaaTestY1564TargetType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.58 | INTEGER | read-create | Specify target type |
| MAC prvtSaaTestY1564TargetMac | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.59 | MacAddress | read-create | Specify target MAC address |
| U32 prvtSaaTestY1564TargetMep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.60 | Unsigned32 | read-create | Specify target MEP |
| U32 prvtSaaTestY1564Cir | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.61 | Unsigned32 | read-create | Specify Committed Information Rate |
| U32 prvtSaaTestY1564Eir | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.62 | Unsigned32 | read-create | Specify EIR |
| INT prvtSaaTestY1564Pattern | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.63 | INTEGER | read-create | Specify pattern type |
| U32 prvtSaaTestY1564ConfigurationStepDuration | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.64 | Unsigned32 | read-create | Specify configuration test step duration |
| INT prvtSaaTestY1564PerformanceTestDuration | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.65 | INTEGER | read-create | Specify performance test duration |
| T/F prvtSaaTestY1564TrafficPolicing | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.66 | TruthValue | read-create | Enable traffic policing test |
| U32 prvtSaaTestY1564CirSteps | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.67 | Unsigned32 | read-create | Specify the number of steps for configuration test |
| U32 prvtSaaTestY1564Timeout | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.68 | Unsigned32 | read-create | The timeout interval for the test packet, in x100 milliseconds |
| INT prvtSaaTestY1564LoopbackType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.69 | INTEGER | read-create | Specify loopback type |
| OCT prvtSaaTestY1564DataSize | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.70 | OCTET STRING | read-create | Specify test PDU size |
| U32 prvtSaaTestY1564CustomDataSize | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.71 | Unsigned32 | read-create | Specify test custom PDU size |
| INT prvtSaaTestY1731SlmMode | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.72 | INTEGER | read-create | Specify test Y1731-slm mode |
| OCT prvtSaaTestY1731SlmDomain | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.73 | OCTET STRING | read-create | Specify Y1731-slm domain level |
| OCT prvtSaaTestY1731SlmMA | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.74 | OCTET STRING | read-create | Specify Y1731-slm cfm ma |
| U32 prvtSaaTestY1731SlmMep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.75 | Unsigned32 | read-create | Specify mep id |
| INT prvtSaaTestY1731SlmTargetType | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.76 | INTEGER | read-create | The target type of the remote device |
| MAC prvtSaaTestY1731SlmTargetMac | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.77 | MacAddress | read-create | The MAC address of the remote device |
| U32 prvtSaaTestY1731SlmTargetMep | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.78 | Unsigned32 | read-create | The MAC address of the remote device |
| U32 prvtSaaTestY1731SlmPriority | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.79 | Unsigned32 | read-create | Specify packet priority |
| U32 prvtSaaTestY1731SlmInterval | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.80 | Unsigned32 | read-create | Specify interval, in seconds |
| INT prvtSaaTestY1731SlmPeriod | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.81 | INTEGER | read-create | Specify period, in milliseconds |
| U32 prvtSaaTestY1731SlmTestId | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.82 | Unsigned32 | read-create | Specify slm test-id |
| U32 prvtSaaTestY1731SlmPduSize | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.83 | Unsigned32 | read-create | Specify slm packet size in bytes |
| T/F prvtSaaTestY1731SlmDropEligible | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.84 | TruthValue | read-create | Specify SLM packets drop eligible flag |
| T/F prvtSaaTestY1731SlmIncludeDelay | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.85 | TruthValue | read-create | Specify if SLM measurement will include delay |
| U32 prvtSaaTestY1731SlmHistory | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.86 | Unsigned32 | read-create | Specify number of last stored probes |
| T/F prvtSaaTestY1731CountAllPriorities | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.87 | TruthValue | read-create | Measure for all priorities |
| prvtSaaTestDataSizeTable | 1.3.6.1.4.1.738.1.5.130.1.2.2 | not-accessible | This table holds the configuration for a SAA test data-size | |
| prvtSaaTestDataSizeEntry | 1.3.6.1.4.1.738.1.5.130.1.2.2.1 | not-accessible | Entry in prvtSaaTestDataSizeTable | |
| INT prvtSaaTestDataSizeIdx | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.1 | INTEGER | not-accessible | Define the PDU size for which the test is executed, in bytes |
| ROW prvtSaaTestDataSizeRowStatus | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.2 | RowStatus | read-create | Row Status field in prvtSaaTestDataSizeTable |
| prvtSaaTestResult | 1.3.6.1.4.1.738.1.5.130.1.3 | |||
| prvtSaaTestY1731ResultTable | 1.3.6.1.4.1.738.1.5.130.1.3.1 | not-accessible | This table contains SAA results for Y1731 tests. | |
| prvtSaaTestY1731ResultEntry | 1.3.6.1.4.1.738.1.5.130.1.3.1.1 | not-accessible | Y.1731 test result table | |
| U32 prvtSaaTestY1731ResultIndex | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.1 | Unsigned32 | not-accessible | SAA Y1731 test results table index |
| U32 prvtSaaTestY1731ResultMep | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.2 | Unsigned32 | read-only | Mep id |
| U32 prvtSaaTestY1731ResultDelayNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.3 | Unsigned32 | read-only | Near end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731ResultDelayFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.4 | Unsigned32 | read-only | Far end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731ResultJitterNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.5 | Unsigned32 | read-only | Near end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731ResultJitterFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.6 | Unsigned32 | read-only | Far end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731ResultFrameLossNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.7 | Unsigned32 | read-only | Near end frame-loss result in 0.001 of a percent |
| U32 prvtSaaTestY1731ResultFrameLossFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.8 | Unsigned32 | read-only | Far end frame-loss result in 0.001 of a percent |
| C32 prvtSaaTestY1731ResultFramesSentNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.9 | Counter32 | read-only | Near end sent frames |
| C32 prvtSaaTestY1731ResultFramesSentFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.10 | Counter32 | read-only | Far end sent frames |
| C32 prvtSaaTestY1731ResultFramesReceivedNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.11 | Counter32 | read-only | Near end received frames |
| C32 prvtSaaTestY1731ResultFramesReceivedFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.12 | Counter32 | read-only | Far end received frames |
| C32 prvtSaaTestY1731ResultFramesPacketSend | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.13 | Counter32 | read-only | Sent packets |
| U32 prvtSaaTestY1731ResultTimeouts | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.14 | Unsigned32 | read-only | Number of timeouts for the SAA Y1731 Pm test |
| U32 prvtSaaTestY1731ResultErrors | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.15 | Unsigned32 | read-only | Number of errors for the SAA Y1731 Pm test |
| U32 prvtSaaTestY1731ResultCompletionTime | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.16 | Unsigned32 | read-only | Completion time for the SAA Y1731 PM test (format is unix time). |
| U32 prvtSaaTestEpsSwitchover | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.17 | Unsigned32 | read-only | Marks if eps switchover occured. |
| prvtSaaTestRfc2544ResultTable | 1.3.6.1.4.1.738.1.5.130.1.3.2 | not-accessible | This table contains SAA results for Rfc2544 tests. | |
| prvtSaaTestRfc2544ResultEntry | 1.3.6.1.4.1.738.1.5.130.1.3.2.1 | not-accessible | Entry in prvtSaaTestRfc2544ResultTable | |
| U32 prvtSaaTestRfc2544ResultIndex | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.1 | Unsigned32 | not-accessible | SAA RFC2544 Throughput test results table index. |
| U32 prvtSaaTestRfc2544ResultPduIndex | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.2 | Unsigned32 | not-accessible | SAA RFC2544 Throughput test results table pdu size |
| U32 prvtSaaTestRfc2544ResultFrameLoss | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.3 | Unsigned32 | read-only | Frame loss of the SAA RFC2544 test measured in 0.001 of a percent |
| U32 prvtSaaTestRfc2544ResultThroughput | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.4 | Unsigned32 | read-only | Throughput of the SAA RFC2544 test measured in Kbps |
| U32 prvtSaaTestRfc2544ResultNetThroughput | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.5 | Unsigned32 | read-only | The actual throughput of the SAA RFC2544 test containing only user data. It is measured in Kbps. |
| U32 prvtSaaTestRfc2544ResultMinDelay | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.6 | Unsigned32 | read-only | Minimum Delay measured in nanoseconds |
| U32 prvtSaaTestRfc2544ResultMaxDelay | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.7 | Unsigned32 | read-only | Maximum Delay measured in nanoseconds |
| U32 prvtSaaTestRfc2544ResultAvgDelay | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.8 | Unsigned32 | read-only | Average Delay measured in nanoseconds |
| U32 prvtSaaTestRfc2544ResultStatus | 1.3.6.1.4.1.738.1.5.130.1.3.2.1.9 | Unsigned32 | read-only | Status of the SAA RFC2544 test |
| prvtSaaTestY1564ResultTable | 1.3.6.1.4.1.738.1.5.130.1.3.3 | not-accessible | This table contains SAA results for Y1564 tests. | |
| prvtSaaTestY1564ResultEntry | 1.3.6.1.4.1.738.1.5.130.1.3.3.1 | not-accessible | Entry in prvtSaaTestY1564ResultTable | |
| U32 prvtSaaTestY1564ResultIndex | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.1 | Unsigned32 | not-accessible | SAA y1564 test results table index. |
| U32 prvtSaaTestY1564ResultStep | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.2 | Unsigned32 | not-accessible | SAA y1564 test results table test step/stage. |
| U32 prvtSaaTestY1564ResultPdu | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.3 | Unsigned32 | not-accessible | SAA y1564 test results table pdu size |
| OCT prvtSaaTestY1564ResultFrameloss | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.4 | OCTET STRING | read-only | Frame loss of the SAA Y1564 test measured in 0.001 of a percent |
| OCT prvtSaaTestY1564ResultThroughput | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.5 | OCTET STRING | read-only | Throughput of the SAA Y1564 test measured in Kbps |
| OCT prvtSaaTestY1564ResultNetThroughput | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.6 | OCTET STRING | read-only | The actual throughput of the SAA Y1564 test containing only user data. It is measured in Kbps. |
| OCT prvtSaaTestY1564ResultFrameDelay | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.7 | OCTET STRING | read-only | Average Delay |
| OCT prvtSaaTestY1564ResultStatus | 1.3.6.1.4.1.738.1.5.130.1.3.3.1.9 | OCTET STRING | read-only | Status of the test |
| prvtSaaTestY1731SlmResultTable | 1.3.6.1.4.1.738.1.5.130.1.3.4 | not-accessible | This table contains SAA results for Y1731-slm tests. | |
| prvtSaaTestY1731SlmResultEntry | 1.3.6.1.4.1.738.1.5.130.1.3.4.1 | not-accessible | Y.1731-slm test result table | |
| U32 prvtSaaTestY1731SlmResultIndex | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.1 | Unsigned32 | not-accessible | SAA Y1731-slm test results table index |
| U32 prvtSaaTestY1731SlmResultMep | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.2 | Unsigned32 | read-only | Mep id |
| U32 prvtSaaTestY1731SlmResultDelayNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.3 | Unsigned32 | read-only | Near end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmResultDelayFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.4 | Unsigned32 | read-only | Far end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmResultJitterNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.5 | Unsigned32 | read-only | Near end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmResultJitterFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.6 | Unsigned32 | read-only | Far end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmResultFrameLossNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.7 | Unsigned32 | read-only | Near end frame-loss result in 0.0000001 of a percent |
| U32 prvtSaaTestY1731SlmResultFrameLossFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.8 | Unsigned32 | read-only | Far end frame-loss result in 0.0000001 of a percent |
| C32 prvtSaaTestY1731SlmResultFramesSentNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.9 | Counter32 | read-only | Near end sent frames |
| C32 prvtSaaTestY1731SlmResultFramesSentFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.10 | Counter32 | read-only | Far end sent frames |
| C32 prvtSaaTestY1731SlmResultFramesReceivedNearEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.11 | Counter32 | read-only | Near end received frames |
| C32 prvtSaaTestY1731SlmResultFramesReceivedFarEnd | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.12 | Counter32 | read-only | Far end received frames |
| U32 prvtSaaTestY1731SlmResultCompletionTime | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.13 | Unsigned32 | read-only | Completion time for the SAA Y1731 PM test (format is unix time). |
| U32 prvtSaaY1731SlmTestEpsSwitchover | 1.3.6.1.4.1.738.1.5.130.1.3.4.1.14 | Unsigned32 | read-only | Marks if eps switchover occured. |
| prvtSaaY1731NotificationTable | 1.3.6.1.4.1.738.1.5.130.1.4 | not-accessible | This table holds notification objects for Y1731 tests | |
| prvtSaaY1731NotificationEntry | 1.3.6.1.4.1.738.1.5.130.1.4.1 | not-accessible | Entry in prvtSaaY1731NotificationTable | |
| U32 prvtSaaY1731NotificationId | 1.3.6.1.4.1.738.1.5.130.1.4.1.1 | Unsigned32 | not-accessible | Table index |
| OCT prvtSaaY1731NotificationDelayThresholdNE | 1.3.6.1.4.1.738.1.5.130.1.4.1.2 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationDelayCurrentNE | 1.3.6.1.4.1.738.1.5.130.1.4.1.3 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationDelayThresholdFE | 1.3.6.1.4.1.738.1.5.130.1.4.1.4 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationDelayCurrentFE | 1.3.6.1.4.1.738.1.5.130.1.4.1.5 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationJitterThresholdNE | 1.3.6.1.4.1.738.1.5.130.1.4.1.6 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationJitterCurrentNE | 1.3.6.1.4.1.738.1.5.130.1.4.1.7 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationJitterThresholdFE | 1.3.6.1.4.1.738.1.5.130.1.4.1.8 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationJitterCurrentFE | 1.3.6.1.4.1.738.1.5.130.1.4.1.9 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationFramelossThresholdNE | 1.3.6.1.4.1.738.1.5.130.1.4.1.10 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationFramelossCurrentNE | 1.3.6.1.4.1.738.1.5.130.1.4.1.11 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationFramelossThresholdFE | 1.3.6.1.4.1.738.1.5.130.1.4.1.12 | OCTET STRING | accessible-for-notify | |
| OCT prvtSaaY1731NotificationFramelossCurrentFE | 1.3.6.1.4.1.738.1.5.130.1.4.1.13 | OCTET STRING | accessible-for-notify | |
| prvtSaaLastTestResult | 1.3.6.1.4.1.738.1.5.130.1.5 | |||
| prvtSaaTestY1731LastResultTable | 1.3.6.1.4.1.738.1.5.130.1.5.1 | not-accessible | This table contains last SAA results for Y1731 tests. | |
| prvtSaaTestY1731LastResultEntry | 1.3.6.1.4.1.738.1.5.130.1.5.1.1 | not-accessible | Y.1731 test last result table | |
| U32 prvtSaaTestY1731LastResultIndex | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.1 | Unsigned32 | read-only | SAA Y1731 test last results table index |
| U32 prvtSaaTestY1731LastResultMep | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.2 | Unsigned32 | read-only | Mep id |
| U32 prvtSaaTestY1731LastResultDelayNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.3 | Unsigned32 | read-only | Last near end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731LastResultDelayFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.4 | Unsigned32 | read-only | Last far end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731LastResultJitterNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.5 | Unsigned32 | read-only | Last near end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731LastResultJitterFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.6 | Unsigned32 | read-only | Last far end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731LastResultFrameLossNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.7 | Unsigned32 | read-only | Last near end frame-loss result in 0.001 of a percent |
| U32 prvtSaaTestY1731LastResultFrameLossFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.8 | Unsigned32 | read-only | Last far end frame-loss result in 0.001 of a percent |
| C32 prvtSaaTestY1731LastResultFramesSentNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.9 | Counter32 | read-only | Last near end sent frames |
| C32 prvtSaaTestY1731LastResultFramesSentFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.10 | Counter32 | read-only | Last far end sent frames |
| C32 prvtSaaTestY1731LastResultFramesReceivedNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.11 | Counter32 | read-only | Last near end received frames |
| C32 prvtSaaTestY1731LastResultFramesReceivedFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.12 | Counter32 | read-only | Last far end received frames |
| C32 prvtSaaTestY1731LastResultFramesPacketSend | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.13 | Counter32 | read-only | Last sent packets |
| U32 prvtSaaTestY1731LastResultTimeouts | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.14 | Unsigned32 | read-only | Last number of timeouts for the SAA Y1731 Pm test |
| U32 prvtSaaTestY1731LastResultErrors | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.15 | Unsigned32 | read-only | Last number of errors for the SAA Y1731 Pm test |
| U32 prvtSaaTestY1731LastResultCompletionTime | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.16 | Unsigned32 | read-only | Last completion time for the SAA Y1731 PM test (format is unix time). |
| U32 prvtSaaTestY1731LastResultEpsSwitchover | 1.3.6.1.4.1.738.1.5.130.1.5.1.1.17 | Unsigned32 | read-only | Marks if eps switchover occured. |
| prvtSaaTestY1731SlmLastResultTable | 1.3.6.1.4.1.738.1.5.130.1.5.2 | not-accessible | This table contains SAA results for Last Y1731-slm test. | |
| prvtSaaTestY1731SlmLastResultEntry | 1.3.6.1.4.1.738.1.5.130.1.5.2.1 | not-accessible | Y.1731-slm test last result table | |
| U32 prvtSaaTestY1731SlmLastResultIndex | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.1 | Unsigned32 | read-only | SAA Y1731-slm test last results table index |
| U32 prvtSaaTestY1731SlmLastResultMep | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.2 | Unsigned32 | read-only | Mep id |
| U32 prvtSaaTestY1731SlmLastResultDelayNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.3 | Unsigned32 | read-only | Last near end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmLastResultDelayFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.4 | Unsigned32 | read-only | Last far end delay result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmLastResultJitterNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.5 | Unsigned32 | read-only | Last near end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmLastResultJitterFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.6 | Unsigned32 | read-only | Last far end jitter result in 0.001 of a microsecond |
| U32 prvtSaaTestY1731SlmLastResultFrameLossNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.7 | Unsigned32 | read-only | Last near end frame-loss result in 0.0000001 of a percent |
| U32 prvtSaaTestY1731SlmLastResultFrameLossFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.8 | Unsigned32 | read-only | Last far end frame-loss result in 0.0000001 of a percent |
| C32 prvtSaaTestY1731SlmLastResultFramesSentNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.9 | Counter32 | read-only | Last near end sent frames |
| C32 prvtSaaTestY1731SlmLastResultFramesSentFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.10 | Counter32 | read-only | Last far end sent frames |
| C32 prvtSaaTestY1731SlmLastResultFramesReceivedNearEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.11 | Counter32 | read-only | Last near end received frames |
| C32 prvtSaaTestY1731SlmLastResultFramesReceivedFarEnd | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.12 | Counter32 | read-only | Last far end received frames |
| U32 prvtSaaTestY1731SlmLastResultCompletionTime | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.13 | Unsigned32 | read-only | Last completion time for the SAA Y1731 PM test (format is unix time). |
| U32 prvtSaaTestY1731SlmLastResultEpsSwitchover | 1.3.6.1.4.1.738.1.5.130.1.5.2.1.14 | Unsigned32 | read-only | Marks if eps switchover occured. |
RFC description
Procurve vendor-private MIB for Service Assurance Agent (SAA) round-trip time and network performance measurements.
Start monitoring BATM Advanced Communication carrier Ethernet equipment (Service Assurance Agent/OAM tests) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.