PRVT-RAPS-SVC-MIB

All MIBs › PRVT-RAPS-SVC-MIB

Organization: BATM Advanced Communication

Last Updated: 2011-03-02

Category: Carrier Ethernet, Protection and Redundancy

Description: Manages BATM Advanced Communication G.8032 RAPS service VLAN binding, ring protection instance, and service association.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-RAPS-SVC-MIB?

PRVT-RAPS-SVC-MIB is a BATM Advanced Communications proprietary MIB for managing G.8032 Ring Automatic Protection Switching (RAPS) with service support on their Carrier Ethernet switches, binding VLANs/services to ring protection instances. It exposes tables for service-to-ring-instance associations, including CFM domain level, sub-ring configuration, and sub-ring role assignment. This MIB directly supports fault and resiliency monitoring — tracking prvtRapsSvcInstRowStatus and sub-ring role/status lets an operator confirm ring protection is correctly provisioned and verify failover behavior during a ring break, which is a critical availability metric for carrier Ethernet ring topologies. It depends on the ITU-T G.8032 standard for its protection-switching logic and likely interacts with CFM (802.1ag/Y.1731) MIBs given the CFM domain level reference. It is deployed on BATM Advanced Communications Carrier Ethernet switches participating in G.8032 protection rings in service-provider metro networks. Engineers can download the PRVT-RAPS-SVC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-RAPS-SVC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM Advanced Communications Carrier Ethernet switches (G.8032 ring nodes)

Monitoring Examples

An operator can poll prvtRapsSvcInstTable via prvtRapsSvcInstIndex to check prvtRapsSvcInstRowStatus and prvtRapsSvcInstCfmDomainLevel, confirming a ring protection service instance is active at the correct CFM domain level. Checking prvtRapsSvcInstSubRingTable's prvtRapsSvcInstSubRingRole for a given prvtRapsSvcInstSubRingId reveals whether a sub-ring is configured as interconnection node or virtual channel, and monitoring prvtRapsSvcMIBNotifications would flag ring topology changes or failover events.

What Can Be Monitored

ring protection service instance status
CFM domain level per service
sub-ring configuration and role
sub-ring row status
ring protection switching events (via notifications)

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From PRVT-QOS-MIB

serviceAccessSwitch

OBJECT-IDENTITY

From PRVT-RAPS-MIB

PrvtRapsActionType
PrvtRapsBlockTimerType
PrvtRapsCfmLevelType
PrvtRapsGuardTimerType
PrvtRapsHoldOffType
PrvtRapsInstIndexType
PrvtRapsInstStatusType
PrvtRapsLinkAggIdType
PrvtRapsLinkOperStatusType
PrvtRapsMepIdType
PrvtRapsMonitoringMethodType
PrvtRapsReceivedCommandType
PrvtRapsReceivedInfoType
PrvtRapsRingIdType
PrvtRapsRoleType
PrvtRapsStatesType
PrvtRapsTopPriCmdType
PrvtRapsVlanIdType
PrvtRapsWaitTimerType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
prvtRapsSvcMIB	1.3.6.1.4.1.738.1.7.6			The SNMP MIB module for Ring Automatic Protection Switching with Service Support (G.8032).
prvtRapsSvcMIBNotifications	1.3.6.1.4.1.738.1.7.6.0
NTF prvtRapsSvcInstSubRingDefectAlarm	1.3.6.1.4.1.738.1.7.6.0.1			This trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingOperStatus variable in the notification.
NTF prvtRapsSvcInstSubRingSwitchoverAlarm	1.3.6.1.4.1.738.1.7.6.0.2			This trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingRapsState variable in the notification.
prvtRapsSvcMIBObjects	1.3.6.1.4.1.738.1.7.6.1
prvtRapsSvcInstTable	1.3.6.1.4.1.738.1.7.6.1.1		not-accessible	R-APS Instance table. Each entry in this table defines an instance of a Ring APS.
prvtRapsSvcInstEntry	1.3.6.1.4.1.738.1.7.6.1.1.1		not-accessible	An entry in prvtRapsSvcInstTable.
PRV prvtRapsSvcInstIndex	1.3.6.1.4.1.738.1.7.6.1.1.1.1	PrvtRapsInstIndexType	not-accessible	An arbitrary index uniquely identifying a Ring APS instance.
ROW prvtRapsSvcInstRowStatus	1.3.6.1.4.1.738.1.7.6.1.1.1.2	RowStatus	read-create	The RowStatus for this R-APS instance.
PRV prvtRapsSvcInstCfmDomainLevel	1.3.6.1.4.1.738.1.7.6.1.1.1.3	PrvtRapsCfmLevelType	read-create	The CFM domain level for this R-APS instance. Must perform shutdown to change this object.
STR prvtRapsSvcInstDescription	1.3.6.1.4.1.738.1.7.6.1.1.1.4	DisplayString	read-create	RAPS instance description.
prvtRapsSvcInstSubRingTable	1.3.6.1.4.1.738.1.7.6.1.2		not-accessible	R-APS Instance Sub-ring Table Each entry in this table defines a sub-ring belonging to a R-APS instance. Sub-rings are not available in version 1 mode.
prvtRapsSvcInstSubRingEntry	1.3.6.1.4.1.738.1.7.6.1.2.1		not-accessible	An entry in prvtRapsSvcInstSubRingTable.
PRV prvtRapsSvcInstSubRingIndex	1.3.6.1.4.1.738.1.7.6.1.2.1.1	PrvtRapsInstIndexType	not-accessible	An arbitrary index uniquely identifying a sub-ring for this R-APS instance.
ROW prvtRapsSvcInstSubRingRowStatus	1.3.6.1.4.1.738.1.7.6.1.2.1.2	RowStatus	read-create	The RowStatus for this sub-ring.
PRV prvtRapsSvcInstSubRingId	1.3.6.1.4.1.738.1.7.6.1.2.1.3	PrvtRapsRingIdType	read-create	The ring ID for this sub-ring.
PRV prvtRapsSvcInstSubRingRole	1.3.6.1.4.1.738.1.7.6.1.2.1.4	PrvtRapsRoleType	read-create	The role of the node inside this sub-ring. Must perform shutdown to change this object.
U32 prvtRapsSvcInstSubRingVirtChanService	1.3.6.1.4.1.738.1.7.6.1.2.1.5	Unsigned32	read-create	Configures the virtual channel VLAN for this sub-ring. Must be a VLAN from the prvtRapsInstMonVlanTable. No two sub-rings can use the same VLAN for the virtual channel VLAN.
T/F prvtRapsSvcInstSubRingRevertiveMode	1.3.6.1.4.1.738.1.7.6.1.2.1.6	TruthValue	read-create	Set to 'true' to select revertive behavior for this sub-ring.
PRV prvtRapsSvcInstSubRingHoldOffTimer	1.3.6.1.4.1.738.1.7.6.1.2.1.7	PrvtRapsHoldOffType	read-create	The hold-off timer time-out value for this sub-ring.
PRV prvtRapsSvcInstSubRingWaitTimer	1.3.6.1.4.1.738.1.7.6.1.2.1.8	PrvtRapsWaitTimerType	read-create	The wait-to-restore timer time-out value for this sub-ring.
PRV prvtRapsSvcInstSubRingGuardTimer	1.3.6.1.4.1.738.1.7.6.1.2.1.9	PrvtRapsGuardTimerType	read-create	The guard timer time-out value for this sub-ring.
PRV prvtRapsSvcInstSubRingBlockTimer	1.3.6.1.4.1.738.1.7.6.1.2.1.10	PrvtRapsBlockTimerType	read-only	The wait to block timer time-out value for this sub-ring.
T/F prvtRapsSvcInstSubRingPropTopChng	1.3.6.1.4.1.738.1.7.6.1.2.1.11	TruthValue	read-create	Set to 'true' to enable topology change propagation for this sub-ring.
T/F prvtRapsSvcInstSubRingShutdown	1.3.6.1.4.1.738.1.7.6.1.2.1.12	TruthValue	read-create	Set to 'true' to de-activate this sub-ring.
PRV prvtRapsSvcInstSubRingClear	1.3.6.1.4.1.738.1.7.6.1.2.1.13	PrvtRapsActionType	read-create	Send the Clear command to this sub-ring.
PRV prvtRapsSvcInstSubRingManualSwitch	1.3.6.1.4.1.738.1.7.6.1.2.1.14	PrvtRapsActionType	read-create	Send the Manual Switch command to this sub-ring.
PRV prvtRapsSvcInstSubRingForcedSwitch	1.3.6.1.4.1.738.1.7.6.1.2.1.15	PrvtRapsActionType	read-create	Send the Forced Switch command to this sub-ring.
PRV prvtRapsSvcInstSubRingOperStatus	1.3.6.1.4.1.738.1.7.6.1.2.1.16	PrvtRapsInstStatusType	read-only	The operational status of this sub-ring.
PRV prvtRapsSvcInstSubRingRapsState	1.3.6.1.4.1.738.1.7.6.1.2.1.17	PrvtRapsStatesType	read-only	The current state of this sub-ring.
PRV prvtRapsSvcInstSubRingTopPriCmd	1.3.6.1.4.1.738.1.7.6.1.2.1.18	PrvtRapsTopPriCmdType	read-only	The received Top Priority Request and Status value for this sub-ring.
OCT prvtRapsSvcInstSubRingPortName	1.3.6.1.4.1.738.1.7.6.1.2.1.19	OCTET STRING	read-only	The textual name of the port belonging to this sub-ring. For a physical port, the format is U/S/P. For a LAG interface, the format is agX.
PRV prvtRapsSvcInstSubRingLinkStatus	1.3.6.1.4.1.738.1.7.6.1.2.1.20	PrvtRapsLinkOperStatusType	read-only	The operational status of the port belonging to this sub-ring.
MAC prvtRapsSvcInstSubRingRcvdNodeId	1.3.6.1.4.1.738.1.7.6.1.2.1.21	MacAddress	read-only	The MAC address of the remote R-APS device connected to the port belonging to this sub-ring.
PRV prvtRapsSvcInstSubRingRcvdCmd	1.3.6.1.4.1.738.1.7.6.1.2.1.22	PrvtRapsReceivedCommandType	read-only	The command received on the port belonging to this sub-ring.
PRV prvtRapsSvcInstSubRingRcvdInfo	1.3.6.1.4.1.738.1.7.6.1.2.1.23	PrvtRapsReceivedInfoType	read-only	The info received on the port belonging to this sub-ring.
STR prvtRapsSvcInstSubRingDescription	1.3.6.1.4.1.738.1.7.6.1.2.1.24	DisplayString	read-create	RAPS instance sub-ring description.
MAC prvtRapsSvcInstSubRingVcRcvdNodeId	1.3.6.1.4.1.738.1.7.6.1.2.1.25	MacAddress	read-only	The MAC address of the remote R-APS device connected through the virtual channel.
PRV prvtRapsSvcInstSubRingVcRcvdCmd	1.3.6.1.4.1.738.1.7.6.1.2.1.26	PrvtRapsReceivedCommandType	read-only	The command received through the virtual channel belonging to this sub-ring.
PRV prvtRapsSvcInstSubRingVcRcvdInfo	1.3.6.1.4.1.738.1.7.6.1.2.1.27	PrvtRapsReceivedInfoType	read-only	The info received through the virtual channel belonging to this sub-ring.
PRV prvtRapsSvcInstSubRingControlVlan	1.3.6.1.4.1.738.1.7.6.1.2.1.28	PrvtRapsVlanIdType	read-create	The control VLAN for this R-APS sub-ring instance. This object must be set to the ID of an existing VLAN. Each R-APS sub-ring instance must use a unique VLAN for the control VLAN. Must perform shutdown to change this object.
prvtRapsSvcInstSubRingPortTable	1.3.6.1.4.1.738.1.7.6.1.3		not-accessible	R-APS Instance Sub-ring port Table An entry in this table defines a physical port belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). A sub-ring port can not be part of the main ring.
prvtRapsSvcInstSubRingPortEntry	1.3.6.1.4.1.738.1.7.6.1.3.1		not-accessible	An entry in prvtRapsInstSubRingPortTable.
ROW prvtRapsSvcInstSubRingPortRowStatus	1.3.6.1.4.1.738.1.7.6.1.3.1.1	RowStatus	read-create	The RowStatus for this sub-ring port.
PRV prvtRapsSvcInstSubRingPortMep	1.3.6.1.4.1.738.1.7.6.1.3.1.2	PrvtRapsMepIdType	read-create	The peer maintenance entity group end point ID that should monitor this sub-ring port. A sub-ring MEP can not be used in another ring.
T/F prvtRapsSvcInstSubRingPortRpl	1.3.6.1.4.1.738.1.7.6.1.3.1.3	TruthValue	read-create	Set to 'true' to define this sub-ring port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
PRV prvtRapsSvcInstSubRingPortMonitoringMethod	1.3.6.1.4.1.738.1.7.6.1.3.1.4	PrvtRapsMonitoringMethodType	read-create	Ethernet ring protection monitoring methods
prvtRapsSvcInstSubRingLagTable	1.3.6.1.4.1.738.1.7.6.1.4		not-accessible	R-APS Instance Sub-ring LAG interface Table An entry in this table defines a LAG interface belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable).
prvtRapsSvcInstSubRingLagEntry	1.3.6.1.4.1.738.1.7.6.1.4.1		not-accessible	An entry in prvtRapsInstSubRingLagTable.
PRV prvtRapsSvcInstSubRingLagId	1.3.6.1.4.1.738.1.7.6.1.4.1.1	PrvtRapsLinkAggIdType	not-accessible	Uniquely identifies a LAG interface belonging to a sub-ring. Must be set to the LAG ID of an existing LAG interface. A sub-ring LAG port can not be part of the main ring.
ROW prvtRapsSvcInstSubRingLagRowStatus	1.3.6.1.4.1.738.1.7.6.1.4.1.2	RowStatus	read-create	The RowStatus for this sub-ring LAG interface.
PRV prvtRapsSvcInstSubRingLagMep	1.3.6.1.4.1.738.1.7.6.1.4.1.3	PrvtRapsMepIdType	read-create	The peer maintenance entity group end point ID that should monitor this sub-ring LAG interface. A sub-ring MEP can not be used in another ring.
T/F prvtRapsSvcInstSubRingLagRpl	1.3.6.1.4.1.738.1.7.6.1.4.1.4	TruthValue	read-create	Set to 'true' to define this sub-ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
PRV prvtRapsSvcInstSubRingLagMonitoringMethod	1.3.6.1.4.1.738.1.7.6.1.4.1.5	PrvtRapsMonitoringMethodType	read-create	Ethernet ring protection monitoring methods

RFC description

Manages protection-ring automatic protection switching (RAPS) service instances and failover state on Procurve/HP devices.

Start monitoring BATM Advanced Communications Carrier Ethernet switches, G.8032 ring nodes with service support with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-RAPS-SVC-MIB

What Is PRVT-RAPS-SVC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description