PRVT-Y1564-MIB

All MIBs › PRVT-Y1564-MIB

Organization: BATM Advanced Communication

Last Updated: 2012-02-27

Category: Carrier Ethernet, Performance Monitoring

Description: Manages BATM Advanced Communication ITU-T Y.1564 Ethernet service activation test configuration and measurement results.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-Y1564-MIB?

This proprietary BATM Advanced Communication MIB controls and provisions ITU-T Y.1564 Ethernet service-activation tests, an industry-standard methodology for validating committed bandwidth, frame loss, and latency of an Ethernet service before or during turn-up. Its data covers test configuration (test type, mode, source/target endpoints, committed information rate) as well as test execution status and results, making it primarily a performance-validation/diagnostics category MIB rather than a passive counter MIB. It is used to monitor the operational status of the test process itself and its measured performance outcome — an operator watches prvtY1564TestExecStatus to know whether a service-activation test is running, completed, or failed, and inspects the associated result object to confirm whether the circuit met its committed rate and QoS targets. It explicitly extends the IETF DISMAN-PING-MIB framework, layering Y.1564-specific test parameters (CIR, source/target type) on top of that standard active-measurement infrastructure. It is deployed on BATM/Telco Systems carrier Ethernet equipment during service turn-up, SLA validation, or periodic health-checks of leased Ethernet circuits. Network engineers evaluating or troubleshooting this functionality can download the PRVT-Y1564-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-Y1564-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM/Telco Systems carrier Ethernet switch

Monitoring Examples

An operator configures a row in prvtY1564TestTable (via prvtY1564TestEntry) setting prvtY1564TestType, prvtY1564TestMode, prvtY1564TestSourceType/prvtY1564TestSource, prvtY1564TestTargetType/prvtY1564TestTarget, and prvtY1564TestCIR, then triggers the test and polls prvtY1564TestExecStatus to see whether it is in-progress or finished. Once complete, prvtY1564TestResult is read to determine whether the measured throughput/loss met the committed information rate, revealing a service that is underperforming its SLA if the result indicates a failure despite a healthy prvtY1564TestExecStatus.

What Can Be Monitored

Y.1564 test execution status
test source/target endpoints
committed information rate (CIR)
test result/pass-fail outcome
configured test profiles

Imported Objects

From PRVT-SWITCH-MIB

switch

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
prvtY1564Mib	1.3.6.1.4.1.738.1.5.129			This MIB provides the extended capability of controlling and provisioning for Y1564 test. It adds extra functionality for DISMAN-PING-MIB
prvtY1564Notifications	1.3.6.1.4.1.738.1.5.129.0
NTF prvtY1564ProbeFailed	1.3.6.1.4.1.738.1.5.129.0.1			This trap should be sent whenever a Y1564 probe on a specific test fails.
NTF prvtY1564ProbeSuccess	1.3.6.1.4.1.738.1.5.129.0.2			This trap should be sent whenever a Y1564 probe on a specific test finishes with success.
NTF prvtY1564TestFinished	1.3.6.1.4.1.738.1.5.129.0.3			This trap should be sent whenever a Y1564 test is finished
prvtY1564Objects	1.3.6.1.4.1.738.1.5.129.1
prvtY1564Test	1.3.6.1.4.1.738.1.5.129.1.1
prvtY1564TestTable	1.3.6.1.4.1.738.1.5.129.1.1.1		not-accessible	This table holds the configuration for a Y1564 test
prvtY1564TestEntry	1.3.6.1.4.1.738.1.5.129.1.1.1.1		not-accessible	NONE
STR prvtY1564TestName	1.3.6.1.4.1.738.1.5.129.1.1.1.1.1	SnmpAdminString	not-accessible	This string is used to describe the test name for the Y1564 test. It is also used as a test identifier.
INT prvtY1564TestType	1.3.6.1.4.1.738.1.5.129.1.1.1.1.2	INTEGER	read-write	Y1564 test type
INT prvtY1564TestMode	1.3.6.1.4.1.738.1.5.129.1.1.1.1.3	INTEGER	read-create	Specify test mode
INT prvtY1564TestExecStatus	1.3.6.1.4.1.738.1.5.129.1.1.1.1.4	INTEGER	read-only	Y1564 test execution status.
INT prvtY1564TestSourceType	1.3.6.1.4.1.738.1.5.129.1.1.1.1.5	INTEGER	read-only	Y1564 test source type.
OCT prvtY1564TestSource	1.3.6.1.4.1.738.1.5.129.1.1.1.1.6	OCTET STRING	read-create	String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2
INT prvtY1564TestTargetType	1.3.6.1.4.1.738.1.5.129.1.1.1.1.7	INTEGER	read-only	Y1564 test target type.
OCT prvtY1564TestTarget	1.3.6.1.4.1.738.1.5.129.1.1.1.1.8	OCTET STRING	read-create	String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2
U32 prvtY1564TestTimeout	1.3.6.1.4.1.738.1.5.129.1.1.1.1.9	Unsigned32	read-write	Y1564 test timeout in 0.1 of a second increments.
U32 prvtY1564TestCIR	1.3.6.1.4.1.738.1.5.129.1.1.1.1.10	Unsigned32	read-write	Y1564 Committed Information Rate (CIR) value.
U32 prvtY1564TestEIR	1.3.6.1.4.1.738.1.5.129.1.1.1.1.11	Unsigned32	read-create	Specify Excess Information Rate
T/F prvtY1564TestConfigurationTestTrafficPolicing	1.3.6.1.4.1.738.1.5.129.1.1.1.1.12	TruthValue	read-create	Specify Traffic Policing
U32 prvtY1564TestConfigurationTestCirSteps	1.3.6.1.4.1.738.1.5.129.1.1.1.1.13	Unsigned32	read-create	Specify the number of Comitted Information Rate Steps
U32 prvtY1564TestConfigurationStepDuration	1.3.6.1.4.1.738.1.5.129.1.1.1.1.14	Unsigned32	read-create	Specify the configuration step duration, in seconds. This duration is used for every CIR step test and also for EIR test and Policing test.
INT prvtY1564TestPerformanceTestDuration	1.3.6.1.4.1.738.1.5.129.1.1.1.1.15	INTEGER	read-create	Specify the performane test duration, in minutes
U32 prvtY1564TestCVLAN	1.3.6.1.4.1.738.1.5.129.1.1.1.1.16	Unsigned32	read-write	C-VLAN ID for the Y1564 test.
U32 prvtY1564TestCVLANPriority	1.3.6.1.4.1.738.1.5.129.1.1.1.1.17	Unsigned32	read-write	VPT for C-VLAN0 for the Y1564 test.
T/F prvtY1564TestCVLANDropEligible	1.3.6.1.4.1.738.1.5.129.1.1.1.1.18	TruthValue	read-write	Drop Eligible flag for C-VLAN for the Y1564 test.
U32 prvtY1564TestSVLAN	1.3.6.1.4.1.738.1.5.129.1.1.1.1.19	Unsigned32	read-only	S-VLAN ID for the Y1564 test.
U32 prvtY1564TestSVLANPriority	1.3.6.1.4.1.738.1.5.129.1.1.1.1.20	Unsigned32	read-write	VPT for S-VLAN0 for the Y1564 test.
T/F prvtY1564TestSVLANDropEligible	1.3.6.1.4.1.738.1.5.129.1.1.1.1.21	TruthValue	read-write	Drop Eligible flag for S-VLAN for the Y1564 test.
INT prvtY1564TestPDUSize	1.3.6.1.4.1.738.1.5.129.1.1.1.1.22	INTEGER	read-write	Packet sizes for Y1564 test: 64, 128, 256, 512, 1024, 1280, 1518, 2000, 9000
INT prvtY1564TestLoopbackType	1.3.6.1.4.1.738.1.5.129.1.1.1.1.23	INTEGER	read-write	Y1564 test loopback type.
INT prvtY1564TestPaternType	1.3.6.1.4.1.738.1.5.129.1.1.1.1.24	INTEGER	read-write	Y1564 test patern type. Options for it are none, null, null-crc, prbs, prbs-crc.
OCT prvtY1564TestProfileName	1.3.6.1.4.1.738.1.5.129.1.1.1.1.25	OCTET STRING	read-create	Name assigned to the Y1564 profile.
ROW prvtY1564TestRowStatus	1.3.6.1.4.1.738.1.5.129.1.1.1.1.26	RowStatus	read-create	The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.
prvtY1564TestResult	1.3.6.1.4.1.738.1.5.129.1.2
prvtY1564TestResultTable	1.3.6.1.4.1.738.1.5.129.1.2.1		not-accessible	This table contains Y1564 results for tests.
prvtY1564TestResultEntry	1.3.6.1.4.1.738.1.5.129.1.2.1.1		not-accessible	NONE
U32 prvtY1564TestResultIndex	1.3.6.1.4.1.738.1.5.129.1.2.1.1.1	Unsigned32	not-accessible	Y1564 test results table index. Index will take values 1 to 13, each value representing a percentage of the CIR or EIR.1-10 step of CIR , EIR+CIR, EIR+CIR+25%EIR + Peformance test CIR The leaf prvtY1564TestResultFrameSize will present this value in a more user-friendly way.
U32 prvtY1564TestResultSentInformationRate	1.3.6.1.4.1.738.1.5.129.1.2.1.1.2	Unsigned32	read-only	The sent information rate at each test step
U32 prvtY1564TestResultPacketSize	1.3.6.1.4.1.738.1.5.129.1.2.1.1.3	Unsigned32	read-only	The packet size for a Y1564 test packet
INT prvtY1564TestResultMode	1.3.6.1.4.1.738.1.5.129.1.2.1.1.4	INTEGER	read-only	The Y1564 test mode correspondig to the result
U32 prvtY1564TestResultFrameLoss	1.3.6.1.4.1.738.1.5.129.1.2.1.1.5	Unsigned32	read-only	Frame loss of the Y1564 test measured in 0.001 of a percent
U32 prvtY1564TestResultInformationRate	1.3.6.1.4.1.738.1.5.129.1.2.1.1.6	Unsigned32	read-only	The received information Rate of the Y1564 test measured in Kbps
U32 prvtY1564TestResultFrameTransferDelay	1.3.6.1.4.1.738.1.5.129.1.2.1.1.7	Unsigned32	read-only	Frame transfer delay for Y1564 test measured in 1/100th of a microsecond..
U32 prvtY1564TestResutFrameDelayVariation	1.3.6.1.4.1.738.1.5.129.1.2.1.1.8	Unsigned32	read-only	Frame delay variation for Y1564 test measured in 1/100th of a microsecond.
INT prvtY1564TestResultStatus	1.3.6.1.4.1.738.1.5.129.1.2.1.1.9	INTEGER	read-only	Status of the Y1564 test
prvtY1564Profiles	1.3.6.1.4.1.738.1.5.129.1.3
prvtY1564ProfileTable	1.3.6.1.4.1.738.1.5.129.1.3.1		not-accessible	Table contains Y1564 thresholds.
prvtY1564ProfileEntry	1.3.6.1.4.1.738.1.5.129.1.3.1.1		not-accessible	NONE
STR prvtY1564ProfileName	1.3.6.1.4.1.738.1.5.129.1.3.1.1.1	SnmpAdminString	not-accessible	This string is used to describe the test profile name for the Y1564 test. It is also used as a profile identifier.
U32 prvtY1564ProfileFrameLoss	1.3.6.1.4.1.738.1.5.129.1.3.1.1.2	Unsigned32	read-create	Specify maximum frameloss to declare test succeeded
U32 prvtY1564ProfileFrameTransferDelay	1.3.6.1.4.1.738.1.5.129.1.3.1.1.3	Unsigned32	read-create	Specify maximum frame transfer delay in microseconds to declare test succeeded
U32 prvtY1564ProfileFrameDelayVariation	1.3.6.1.4.1.738.1.5.129.1.3.1.1.4	Unsigned32	read-create	Specify maximum frame delay variation in microseconds to declare test succeeded
ROW prvtY1564ProfileRowStatus	1.3.6.1.4.1.738.1.5.129.1.3.1.1.5	RowStatus	read-create	Creation/delete/edit of the Y1564 profile.
prvtY1564Conformance	1.3.6.1.4.1.738.1.5.129.2
prvtY1564Compliances	1.3.6.1.4.1.738.1.5.129.2.1
prvtY1564Compliance	1.3.6.1.4.1.738.1.5.129.2.1.1			The compliance statement for support of the Y1564 MIB module.
prvtY1564Groups	1.3.6.1.4.1.738.1.5.129.2.2
prvtY1564TestGroup	1.3.6.1.4.1.738.1.5.129.2.2.1			Objects for the Y1564 test group.
prvtY1564TestResultsGroup	1.3.6.1.4.1.738.1.5.129.2.2.2			Objects for the Y1564 test results group.
prvtY1564ProfilesGroup	1.3.6.1.4.1.738.1.5.129.2.2.3			Objects for the Y1564 profiles group.
prvtY1564NotificationsGroup	1.3.6.1.4.1.738.1.5.129.2.2.4			Objects for the Notifications group.

RFC description

Y.1564 network performance testing capability for Ethernet services.

Start monitoring BATM/Telco Systems carrier Ethernet switch (ITU-T Y.1564 service-activation test) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-Y1564-MIB

What Is PRVT-Y1564-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description