PEPWAVE-MAX-MIB

All MIBs › PEPWAVE-MAX-MIB

Organization: Pepwave

Last Updated: 2012-06-06

Category: WAN, Wireless/WiFi

Description: Manages Pepwave MAX mobile LTE/cellular routers, covering cellular signal quality, WAN failover state, and data usage.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PEPWAVE-MAX-MIB?

PEPWAVE-MAX-MIB is a vendor-specific MIB for Peplink's Pepwave MAX line of mobile LTE/cellular routers, used in vehicle, IoT, and branch connectivity deployments. It exposes objects covering device identity (firmware, serial number, system time), LAN interface configuration, and a per-link table describing cellular/WAN connections and their status. The MIB directly supports monitoring device software and operational status through objects like maxFirmware (software version), maxUpTime (device uptime), and per-link connection counts that reveal WAN failover and cellular link health. It appears to be a self-contained vendor MIB without heavy reliance on other standard MIBs, focused on Pepwave's own management model. It is typically deployed by mobile network operators or fleet/IoT administrators monitoring multi-WAN cellular router uptime and connectivity redundancy in the field. Network engineers evaluating or troubleshooting this functionality can download the PEPWAVE-MAX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PEPWAVE-MAX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Pepwave MAX cellular/LTE router

Monitoring Examples

An administrator would poll maxUpTime and maxFirmware to confirm the router has not unexpectedly rebooted and is running the expected firmware version, and check maxLanStatus/maxLanIp to verify LAN connectivity is up. Walking linkTable/linkEntry with linkConnNum and linkName reveals which cellular or WAN links are currently active and how many connections each is carrying, which would expose a failover event if the primary WAN link count drops to zero. A sudden drop in maxLinkNumber would indicate loss of one or more WAN paths, a key signal for SD-WAN style failover monitoring.

What Can Be Monitored

device uptime
firmware version
serial number
LAN IP/subnet status
WAN link count and connection status
system time

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
pepwaveMAX	1.3.6.1.4.1.27662.1			MIB module for Pepwave MAX.
maxStatus	1.3.6.1.4.1.27662.1.1
maxSystem	1.3.6.1.4.1.27662.1.1.1
STR maxFirmware	1.3.6.1.4.1.27662.1.1.1.1	NameString	read-only	MAX firmware version.
STR maxSerialNumber	1.3.6.1.4.1.27662.1.1.1.2	NameString	read-only	MAX serial number.
STR maxTime	1.3.6.1.4.1.27662.1.1.1.3	NameString	read-only	MAX system time.
TIK maxUpTime	1.3.6.1.4.1.27662.1.1.1.4	TimeTicks	read-only	MAX up time (in hundredths of a second) since the system was last re-initialized.
maxLan	1.3.6.1.4.1.27662.1.1.1.6
STR maxLanStatus	1.3.6.1.4.1.27662.1.1.1.6.1	NameString	read-only	MAX LAN status (up/down).
IP maxLanIp	1.3.6.1.4.1.27662.1.1.1.6.2	IpAddress	read-only	MAX LAN IP address.
IP maxLanSubnetMask	1.3.6.1.4.1.27662.1.1.1.6.3	IpAddress	read-only	MAX LAN sub-net mask.
maxLinkStatus	1.3.6.1.4.1.27662.1.1.2
C32 maxLinkNumber	1.3.6.1.4.1.27662.1.1.2.1	Counter32	read-only	The number of network interfaces (regardless of their current state) present on this system.
linkTable	1.3.6.1.4.1.27662.1.1.2.2		not-accessible	A list of link status.
linkEntry	1.3.6.1.4.1.27662.1.1.2.2.1		not-accessible	An entry containing management information applicable to a particular interface.
CON linkConnNum	1.3.6.1.4.1.27662.1.1.2.2.1.1	ConnectionNum	not-accessible	Virtual WAN index number (1-based, unique).
STR linkName	1.3.6.1.4.1.27662.1.1.2.2.1.2	NameString	read-only	MAX link status (connecting/connected/link down).
STR linkStatus	1.3.6.1.4.1.27662.1.1.2.2.1.3	NameString	read-only	MAX link status (connecting/connected/link down).
C32 linkThroughputIn	1.3.6.1.4.1.27662.1.1.2.2.1.4	Counter32	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.
C32 linkThroughputOut	1.3.6.1.4.1.27662.1.1.2.2.1.5	Counter32	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.
C64 linkDataTransferred	1.3.6.1.4.1.27662.1.1.2.2.1.6	Counter64	read-only	The numbe of bytes transferred through.
linkIpTable	1.3.6.1.4.1.27662.1.1.2.3		not-accessible	A list of link status.
linkIpEntry	1.3.6.1.4.1.27662.1.1.2.3.1		not-accessible	An entry containing management information applicable to a particular interface.
CON linkIpConnNum	1.3.6.1.4.1.27662.1.1.2.3.1.1	ConnectionNum	not-accessible	Virtual WAN index number.
TAB linkIpIndex	1.3.6.1.4.1.27662.1.1.2.3.1.2	TableIndex	not-accessible	Virtual WAN index number.
IP linkIp	1.3.6.1.4.1.27662.1.1.2.3.1.3	IpAddress	read-only	MAX link IP address list.
wanUsageTable	1.3.6.1.4.1.27662.1.1.3		not-accessible	A list of interface entries.
wanUsageEntry	1.3.6.1.4.1.27662.1.1.3.1		not-accessible	An entry containing management information applicable to a particular interface.
TAB wanUsageIndex	1.3.6.1.4.1.27662.1.1.3.1.1	TableIndex	not-accessible	Physical WAN index number.
C32 wanUsageThroughputIn	1.3.6.1.4.1.27662.1.1.3.1.2	Counter32	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.
C32 wanUsageThroughputOut	1.3.6.1.4.1.27662.1.1.3.1.3	Counter32	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.
C64 wanUsageDataTransferred	1.3.6.1.4.1.27662.1.1.3.1.4	Counter64	read-only	The numbe of bytes transferred through.
maxMaintenance	1.3.6.1.4.1.27662.1.2
STR maxReboot	1.3.6.1.4.1.27662.1.2.1	NameString	read-write	Reboot the device. Write 'enable' to take effect.
maxLanConfig	1.3.6.1.4.1.27662.1.3
POR portLanSpeedConfig	1.3.6.1.4.1.27662.1.3.1	PortSpeedType	read-write	Set device's LAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
portWanSpeedConfigTable	1.3.6.1.4.1.27662.1.3.2		not-accessible	A list of interface entries.
portWanSpeedConfigEntry	1.3.6.1.4.1.27662.1.3.2.1		not-accessible	An entry containing management information applicable to a particular interface.
TAB portWanSpeedConfigIndex	1.3.6.1.4.1.27662.1.3.2.1.1	TableIndex	not-accessible	Physical LAN/WAN port name.
POR portWanSpeedConfig	1.3.6.1.4.1.27662.1.3.2.1.2	PortSpeedType	read-write	Set device's WAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
IP lanConfigIp	1.3.6.1.4.1.27662.1.3.3	IpAddress	read-write	Set device's LAN IP address.
IP lanConfigSubnetMask	1.3.6.1.4.1.27662.1.3.4	IpAddress	read-write	Set device's LAN sub-net mask.
maxConformance	1.3.6.1.4.1.27662.1.50
maxCompliances	1.3.6.1.4.1.27662.1.50.1
maxCompliance	1.3.6.1.4.1.27662.1.50.1.1			MAX compliance groups.
maxGroups	1.3.6.1.4.1.27662.1.50.2
maxSystemGroup	1.3.6.1.4.1.27662.1.50.2.1			MAX's system status group.
maxLinkGroup	1.3.6.1.4.1.27662.1.50.2.2			MAX's system status group.
maxWanGroup	1.3.6.1.4.1.27662.1.50.2.3			MAX's system status group.
maxSetGroup	1.3.6.1.4.1.27662.1.50.2.4			MAX's system status group.

RFC description

MIB module for Pepwave MAX routers, monitoring WAN connections, system status, and network interfaces.

Start monitoring Pepwave MAX cellular/LTE router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PEPWAVE-MAX-MIB

What Is PEPWAVE-MAX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description