All MIBs › PEPWAVE-MAX-MIB › portLanSpeedConfig
portLanSpeedConfig
Module: PEPWAVE-MAX-MIB
OID (symbolic): PEPWAVE-MAX-MIB::portLanSpeedConfig
OID (numeric): 1.3.6.1.4.1.27662.1.3.1
Node type: OBJECT-TYPE
Type: PortSpeedType
Access: read-write
Description: Set device's LAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
What is portLanSpeedConfig?
Sets the device's LAN port speed and duplex mode, choosing from Auto, 10baseT-FD/HD, 100baseTx-FD/HD, or 1000baseTx-FD/HD. An admin hard-sets this away from Auto when troubleshooting a duplex mismatch with a connected switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.27662.1.3.1 snmpwalk -v2c -c public <target> PEPWAVE-MAX-MIB::portLanSpeedConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.27662.1.3.1.1 snmpget -v2c -c public <target> PEPWAVE-MAX-MIB::portLanSpeedConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.27662.1.3.1.1 s <value>
Start monitoring Pepwave MAX cellular/LTE router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEPWAVE-MAX-MIB::portLanSpeedConfig OID value, configure state conditions and alerts, and monitor any Pepwave MAX cellular/LTE router from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.27662 | pepwave | AP-MANAGEMENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.27662.1 | pepwaveMAX | PEPWAVE-MAX-MIB |
| 1.3.6.1.4.1.27662.1.3 | maxLanConfig | PEPWAVE-MAX-MIB |
| 1.3.6.1.4.1.27662.1.3.1 | portLanSpeedConfig | PEPWAVE-MAX-MIB |