| OID symbolic | OID numeric | Type | Access | Description |
|---|
| swPimSmMIB | 1.3.6.1.4.1.171.12.52 | | | The Structure of PIM SM Information for the
proprietary enterprise. |
| swPimSmCtrl | 1.3.6.1.4.1.171.12.52.1 | | | |
| INT swPimSmGlobalState | 1.3.6.1.4.1.171.12.52.1.1 | INTEGER | read-write | Used to control PIM-SM state. |
| swPimSmInfo | 1.3.6.1.4.1.171.12.52.2 | | | |
| I32 swPimRegisterProbeTime | 1.3.6.1.4.1.171.12.52.2.1 | Integer32 | read-write | Used to set a time to send a probe message from the Designated Router (DR)
to the Rendezvous Point (RP) before the Register Suppression time expires.
If a Register Stop message is received by the DR, the Register Suppression
Time will be restarted. If no Register Stop message is received within the
probe time, Register Packets will be resent to the RP. The default value is
5 seconds. |
| I32 swPimRegisterSuppressionTime | 1.3.6.1.4.1.171.12.52.2.2 | Integer32 | read-write | The time interval between receiving a Register-Stop message and restarting
the process of sending of register messages again. A lower value represents
an increase in register messages being sent to the RP, while a higher value
represents a longer latency period for new receivers wishing to join the
group. |
| swPimInfoTable | 1.3.6.1.4.1.171.12.52.2.3 | | not-accessible | The PIM Information Table contains PIM related information, such as DR
priority. |
| swPimInfoEntry | 1.3.6.1.4.1.171.12.52.2.3.1 | | not-accessible | An entry in the PIM Information Table. |
| NUM swPimInfoInterface | 1.3.6.1.4.1.171.12.52.2.3.1.1 | InterfaceIndex | not-accessible | The ifIndex value of this PIM interface. |
| IP swPimInfoAddress | 1.3.6.1.4.1.171.12.52.2.3.1.2 | IpAddress | read-only | The IP address of the PIM interface. |
| IP swPimInfoNetMask | 1.3.6.1.4.1.171.12.52.2.3.1.3 | IpAddress | read-only | The network mask for the IP address of the PIM interface. |
| IP swPimInfoDesignatedRouter | 1.3.6.1.4.1.171.12.52.2.3.1.4 | IpAddress | read-only | The Designated Router on this PIM interface. For point-to-
point interfaces, this object has the value 0.0.0.0. |
| I32 swPimInfoHelloInterval | 1.3.6.1.4.1.171.12.52.2.3.1.5 | Integer32 | read-write | The frequency at which PIM Hello messages are transmitted
on this interface. |
| I32 swPimInfoJoinPruneInterval | 1.3.6.1.4.1.171.12.52.2.3.1.6 | Integer32 | read-write | The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval. |
| U32 swPimInfoDRPriority | 1.3.6.1.4.1.171.12.52.2.3.1.7 | Unsigned32 | read-write | The DR Priority sets the priority of an IP interface to become
the Designated router for the multiple access network. A numerically
larger priority is always preferred, yet a lower number represents a
higher priority. A router's knowledge of the current DR on an interface
can change when a PIM Hello message is received, when a neighbor timers
out, or when a router's own DR priority changes. |
| INT swPimInfoMode | 1.3.6.1.4.1.171.12.52.2.3.1.8 | INTEGER | read-write | The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1. |
| INT swPimInfoState | 1.3.6.1.4.1.171.12.52.2.3.1.9 | INTEGER | read-write | The configured state of this PIM interface. |
| swPimSmMgmt | 1.3.6.1.4.1.171.12.52.3 | | | |
| swPimCbsrInfoMgmt | 1.3.6.1.4.1.171.12.52.3.1 | | | |
| I32 swpimCbsrBootStrapPeriod | 1.3.6.1.4.1.171.12.52.3.1.1 | Integer32 | read-write | The time interval, in seconds, for Boot Strap Messages originating
from the elected BSR. |
| I32 swPimCbsrHashMaskLen | 1.3.6.1.4.1.171.12.52.3.1.2 | Integer32 | read-write | The length (in bits) of the mask to use for the hash function(This hash
algorithm will be used to determine which candidate RP will be the RP for
the PIM-SM network.).For IPv4 we recommend a value of 30. For IPv6 we
recommand a value of 126. |
| swPimCbsrTable | 1.3.6.1.4.1.171.12.52.3.1.3 | | not-accessible | The PIM CBSR Table contains the candidate bootstrap router related
information, such as interface name, IP address and priority. |
| swPimCbsrEntry | 1.3.6.1.4.1.171.12.52.3.1.3.1 | | not-accessible | An entry in the PIM CBSR Table. |
| NUM swPimCbsrInterface | 1.3.6.1.4.1.171.12.52.3.1.3.1.1 | InterfaceIndex | not-accessible | The ifIndex value of this PIM interface. |
| IP swPimCbsrIpAddress | 1.3.6.1.4.1.171.12.52.3.1.3.1.2 | IpAddress | read-only | The IP address of this PIM interface. |
| IP swPimCbsrSubnetMask | 1.3.6.1.4.1.171.12.52.3.1.3.1.3 | IpAddress | read-only | The IP netmask for this PIM interface. |
| I32 swPimCbsrPriority | 1.3.6.1.4.1.171.12.52.3.1.3.1.4 | Integer32 | read-write | The preference value for the local candidate interface to become a bootstrap
router. The value of -1 is used to indicate the local candidate interface
cannot become the BSR. |
| swPimCandidateRPMgmt | 1.3.6.1.4.1.171.12.52.3.2 | | | |
| I32 swPimCandidateRPHoldtime | 1.3.6.1.4.1.171.12.52.3.2.1 | Integer32 | read-write | Used to set the time CRP advertisements remain valid on the PIM-SM enabled
network. If these advertisements, set here, aren't received by the BSR within
this time period, the CRP will be removed from the list of candidates.
0 states to the BSR that this CRP should immediately be removed. Default: 150
seconds. |
| I32 swPimCandidateRPPriority | 1.3.6.1.4.1.171.12.52.3.2.2 | Integer32 | read-write | This value determines the priority of a CRP to become the RP for the
distribution tree. A lower value denotes a higher priority. If there is a tie
for priority, the device with the highest IP address will become the RP. This
information is stored in the BSR, along with the RP address and corresponding
encoded group address. |
| I32 swPimCandidateRPWildcardPrefixCnt | 1.3.6.1.4.1.171.12.52.3.2.3 | Integer32 | read-write | The number of enocded group addresses included in the message; indicating
the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0'
implies a prefix of 224.0.0.0 with mask length of 4; i.e. all multicast
groups. If the C-RP is not configured with Group-prefix information, the
C-RP puts a default value of '0' in this field. |
| swPimCandidateRPTable | 1.3.6.1.4.1.171.12.52.3.2.4 | | not-accessible | The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of pimComponentCRPHoldTime is
non-zero. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of pimComponentCRPHoldTime is non-
zero). |
| swPimCandidateRPEntry | 1.3.6.1.4.1.171.12.52.3.2.4.1 | | not-accessible | An entry (conceptual row) in the pimCandidateRPTable. |
| IP swPimCandidateRPGroupAddress | 1.3.6.1.4.1.171.12.52.3.2.4.1.1 | IpAddress | not-accessible | The IP multicast group address which, when combined with
pimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP. |
| IP swPimCandidateRPGroupMask | 1.3.6.1.4.1.171.12.52.3.2.4.1.2 | IpAddress | not-accessible | The multicast group address mask which, when combined with
pimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP. |
| STR swPimCandidateRPInterface | 1.3.6.1.4.1.171.12.52.3.2.4.1.3 | DisplayString | read-create | The name of the interface which will be
advertised as a Candidate-RP. |
| ROW swPimCandidateRPRowStatus | 1.3.6.1.4.1.171.12.52.3.2.4.1.4 | RowStatus | read-create | The status of this row, by which new entries may be
created, or old entries deleted from this table. |
| swPimNeighborTable | 1.3.6.1.4.1.171.12.52.3.3 | | not-accessible | The (conceptual) table listing the router's PIM neighbors. |
| swPimNeighborEntry | 1.3.6.1.4.1.171.12.52.3.3.1 | | not-accessible | An entry (conceptual row) in the swPimNeighborTable. |
| IP swPimNeighborAddress | 1.3.6.1.4.1.171.12.52.3.3.1.1 | IpAddress | not-accessible | The IP address of the PIM neighbor for which to find PIM neighbor information. |
| NUM swPimNeighborIfIndex | 1.3.6.1.4.1.171.12.52.3.3.1.2 | InterfaceIndex | read-only | The value of ifIndex for the interface used for which to find PIM neighbor information. |
| TIK swPimNeighborExpiryTime | 1.3.6.1.4.1.171.12.52.3.3.1.3 | TimeTicks | read-only | The minimum time remaining before this PIM neighbor ages out. |
| swPimSptMgmt | 1.3.6.1.4.1.171.12.52.3.4 | | | |
| INT swPimLastHopSptSwitchover | 1.3.6.1.4.1.171.12.52.3.4.3 | INTEGER | read-write | Used by the last hop router to decide whether to receive the multicast
data from the shared tree or switch over to the shortest path tree.
When the switchover mode is set to be never, the last hop router will always
receive the multicast data from the shared tree. When the mode is set to
immediately, the last hop router will always receive the multicast data from
the shortest path tree. |
| swPimRegChksumIncDataTable | 1.3.6.1.4.1.171.12.52.3.5 | | not-accessible | The PIM Register Checksum Including Data Table contains the PIM
register checksum including data information, such as RP address and
state. |
| swPimRegChksumIncDataEntry | 1.3.6.1.4.1.171.12.52.3.5.1 | | not-accessible | An entry in the PIM Register Checksum Including Data Table. |
| IP swL3SwPimRegChksumIncDataRpAddr | 1.3.6.1.4.1.171.12.52.3.5.1.1 | IpAddress | not-accessible | Specifies the RP address. |
| ROW swL3SwPimRegChksumIncDataState | 1.3.6.1.4.1.171.12.52.3.5.1.2 | RowStatus | read-create | The state of register checksum including data for RPs. |
| swPimStaticRPTable | 1.3.6.1.4.1.171.12.52.3.6 | | not-accessible | The PIM Static RP Table contains the PIM static RP related information,
such as group address, group mask, RP address and RP row status. |
| swPimStaticRPEntry | 1.3.6.1.4.1.171.12.52.3.6.1 | | not-accessible | An entry in the PIM Static RP Table. |
| IP swPimStaticRPGroupAddress | 1.3.6.1.4.1.171.12.52.3.6.1.1 | IpAddress | not-accessible | The IP multicast group address which, when combined with
swPimStaticRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a static RP. |
| IP swPimStaticRPGroupMask | 1.3.6.1.4.1.171.12.52.3.6.1.2 | IpAddress | not-accessible | The multicast group address mask which, when combined with
swPimStaticRPGroupAddress, identifies a group prefix for which
the local router will advertise itself as a static RP. |
| IP swPimStaticRPAddress | 1.3.6.1.4.1.171.12.52.3.6.1.3 | IpAddress | not-accessible | The (unicast) address of the interface which will be
advertised as a static RP. |
| ROW swPimStaticRPRowStatus | 1.3.6.1.4.1.171.12.52.3.6.1.4 | RowStatus | read-create | The status of this row, by which new entries may be
created, or old entries deleted from this table. |
| swPimIpMRouteTable | 1.3.6.1.4.1.171.12.52.3.7 | | not-accessible | The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB. |
| swPimIpMRouteEntry | 1.3.6.1.4.1.171.12.52.3.7.1 | | not-accessible | An entry (conceptual row) in the pimIpMRouteTable. There
is one entry, per entry in the ipMRouteTable, whose incoming
interface is running PIM. |
| IP swPimIpMRouteGroup | 1.3.6.1.4.1.171.12.52.3.7.1.1 | IpAddress | not-accessible | The IP multicast group address for which this entry
contains multicast routing information. |
| IP swPimIpMRouteSource | 1.3.6.1.4.1.171.12.52.3.7.1.2 | IpAddress | not-accessible | The network address which, when combined with the corresponding value of
ipMRouteSourceMask, identifies the sources for which this entry contains multicast
routing information. |
| IP swPimIpMRouteSourceMask | 1.3.6.1.4.1.171.12.52.3.7.1.3 | IpAddress | not-accessible | The network mask which, when combined with the corresponding value of ipMRouteSource,
identifies the sources for which this entry contains multicast routing information. |
| TIK swPimIpMRouteUpstreamAssertTimer | 1.3.6.1.4.1.171.12.52.3.7.1.4 | TimeTicks | read-only | The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert timer has changed the
upstream neighbor away from the RPF neighbor. |
| I32 swPimIpMRouteAssertMetric | 1.3.6.1.4.1.171.12.52.3.7.1.5 | Integer32 | read-only | The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is received. |
| I32 swPimIpMRouteAssertMetricPref | 1.3.6.1.4.1.171.12.52.3.7.1.6 | Integer32 | read-only | The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect. |
| T/F swPimIpMRouteAssertRPTBit | 1.3.6.1.4.1.171.12.52.3.7.1.7 | TruthValue | read-only | The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect. |
| BIT swPimIpMRouteFlags | 1.3.6.1.4.1.171.12.52.3.7.1.8 | Bits | read-only | This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits. |
| STR swPimIpMRouteType | 1.3.6.1.4.1.171.12.52.3.7.1.9 | DisplayString | read-only | This object describes the PIM-specific type as related to a
multicast state entry. |
| swPimRPSetMgmt | 1.3.6.1.4.1.171.12.52.3.8 | | | |
| IP swPimRPSetBootstrapRouter | 1.3.6.1.4.1.171.12.52.3.8.1 | IpAddress | read-only | Specifies a Bootstrap Router. |
| swPimRPSetTable | 1.3.6.1.4.1.171.12.52.3.8.2 | | not-accessible | The (conceptual) table listing PIM information for
candidate Rendezvous Points (CRPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements. When
the local router is not the BSR, this information is
obtained from received RP-Set messages. |
| swPimRPSetEntry | 1.3.6.1.4.1.171.12.52.3.8.2.1 | | not-accessible | An entry (conceptual row) in the pimRPSetTable. |
| I32 swPimRPSetComponent | 1.3.6.1.4.1.171.12.52.3.8.2.1.1 | Integer32 | not-accessible | A number uniquely identifying the component. Each
protocol instance connected to a separate domain should have
a different index value. |
| IP swPimRPSetGroupAddress | 1.3.6.1.4.1.171.12.52.3.8.2.1.2 | IpAddress | not-accessible | The IP multicast group address which, when combined with pimRPSetGroupMask, gives the
group a prefix. This prefix will determine for which entry CRP information is to be
displayed, and which entry contains information about the Candidate-RP. |
| IP swPimRPSetGroupMask | 1.3.6.1.4.1.171.12.52.3.8.2.1.3 | IpAddress | not-accessible | The multicast group address mask which, when combined with
pimRPSetGroupAddress, gives the group a prefix to determine and which entry contains
which entry CRP information is to be displayed for which this
entry contains information about the Candidate-RP. |
| IP swPimRPSetAddress | 1.3.6.1.4.1.171.12.52.3.8.2.1.4 | IpAddress | not-accessible | The IP address of the Candidate-RP. |
| INT swPimRPSetType | 1.3.6.1.4.1.171.12.52.3.8.2.1.5 | INTEGER | read-only | The type of a Candidate-RP. |
