PERIBIT-COMMON-MIB

All MIBs › PERIBIT-COMMON-MIB

Organization: Peribit Networks, Inc

Last Updated: 2003--0-9-

Category: Products/Registration

Description:

Defines common textual conventions and shared objects used across Peribit Networks WAN optimization MIB modules.

Imported Objects

pnCommonMib	OBJECT-IDENTITY
pnModules	OBJECT-IDENTITY

From PERIBIT-GLOBAL-TC

TcChassisType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

What Is PERIBIT-COMMON-MIB?

PERIBIT-COMMON-MIB is a foundational MIB module from Peribit Networks, a WAN optimization/compression appliance vendor later acquired by Juniper, defining textual conventions and shared objects used across all of Peribit's product-specific MIB modules. It belongs to the WAN-optimization/network-appliance management category, and per its stated purpose of being "implemented by all Peribit Networks' products," it acts as a common base module rather than a device-specific data source. Because it is a shared/common definitions module, it likely exposes little or no device-specific runtime monitoring data of its own — instead it defines common types (enumerations, identity/version conventions) reused by monitorable objects in other Peribit MIBs. Its dependency relationship is explicit: essentially every other Peribit MIB module depends on this common module for shared type definitions. It is deployed alongside Peribit WAN-optimization appliances in enterprise/branch-office WAN environments, loaded by management stations as a prerequisite for the product-specific Peribit MIBs that actually expose device status and traffic-optimization statistics, making this PERIBIT-COMMON-MIB reference the shared foundation those other modules build on.

IPNetwork Monitor allows you to monitor SNMP objects defined in PERIBIT-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Peribit Networks WAN optimization appliances

Monitoring Examples

No sample objects are provided for this entry, and its stated purpose is to supply shared textual conventions/definitions for other Peribit MIBs rather than device-specific runtime data, so there is no concrete monitoring scenario to describe honestly for this module by itself. Polling for actual appliance health or WAN-optimization statistics would occur against the other Peribit product MIBs that import definitions from this common module.

OIDs

OID symbolic	OID numeric	Type	Access	Description
pnChassis	1.3.6.1.4.1.8239.2.1.2.2			Sub-tree for common chassis information.
TCC pnChassisType	1.3.6.1.4.1.8239.2.1.2.2.1	TcChassisType	read-only	Chassis type for this Peribit device.
pnCommonConfMib	1.3.6.1.4.1.8239.2.1.1			Sub-tree for Sequence Reducer MIB conformance statements.
STR pnCommonEventDescr	1.3.6.1.4.1.8239.2.1.3.1.1	DisplayString	accessible-for-notify	String that provides a textual description of the event.
pnCommonEventEvents	1.3.6.1.4.1.8239.2.1.3.2			Branch for the events themselves.
pnCommonEventEventsV2	1.3.6.1.4.1.8239.2.1.3.2.0			Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
NTF pnCommonEventFanFailure	1.3.6.1.4.1.8239.2.1.3.2.0.9			A cooling fan inside the device has failed. The 'pnCommonEventDescr' object has the name of the fan that failed.
NTF pnCommonEventFanOk	1.3.6.1.4.1.8239.2.1.3.2.0.11			A cooling fan inside the device that had previously failed or whose speed variation was high is now working properly. The 'pnCommonEventDescr' object has the name of the fan that has recovered.
NTF pnCommonEventFanSpeedVariation	1.3.6.1.4.1.8239.2.1.3.2.0.10			The speed of a cooling fan inside the device is either too low or too high. The 'pnCommonEventDescr' object has the name of the fan that has the problem.
NTF pnCommonEventFaultTolerantPassThrough	1.3.6.1.4.1.8239.2.1.3.2.0.8			An anomalous health condition was detected. It would have subsequently triggered hardware pass through mode followed by a reboot.
NTF pnCommonEventInFailSafeMode	1.3.6.1.4.1.8239.2.1.3.2.0.1			This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: o Fail-safe reboot was explicitly initiated by the user. o The device rebooted automatically too many times because of the failure of internal consistency checks or the failure of tests that verify proper operation of the device.
NTF pnCommonEventInterfaceDuplexMismatch	1.3.6.1.4.1.8239.2.1.3.2.0.14			A possible mismatch was detected between the duplex setting of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'pnCommonEventDescr' object. Note that this notification is quite different from pnCommonEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same Peribit device.
NTF pnCommonEventInterfaceSpeedMismatch	1.3.6.1.4.1.8239.2.1.3.2.0.12			A mismatch is detected between the local and remote interface settings. This can happen due to a mismatch in the local and remote interface speed or mode.
NTF pnCommonEventInterfaceSpeedOk	1.3.6.1.4.1.8239.2.1.3.2.0.13			A mismatch previously detected between the local and remote interface settings is now resolved. The local and remote interface speed and mode are matched.
NTF pnCommonEventIpsecSecurityAssociationAdded	1.3.6.1.4.1.8239.2.1.3.2.0.15			An IPSec security association has been negotiated and added to security association database.
NTF pnCommonEventIpsecSecurityAssociationDeleted	1.3.6.1.4.1.8239.2.1.3.2.0.17			An IPSec security association has been deleted from the security association database.
NTF pnCommonEventIpsecSecurityAssociationExpired	1.3.6.1.4.1.8239.2.1.3.2.0.16			An IPSec security association has been deleted from the security association database.
NTF pnCommonEventLicenseExpired	1.3.6.1.4.1.8239.2.1.3.2.0.4			The license for the system expired. As a result, the system will switch over to and stay in pass-through mode.
NTF pnCommonEventLicenseWillExpire	1.3.6.1.4.1.8239.2.1.3.2.0.6			The license for the system is about to expire shortly. When it eventually does expire, the system will switch over to and stay in pass-through mode.
NTF pnCommonEventLoginFailure	1.3.6.1.4.1.8239.2.1.3.2.0.7			A user's login attempt via the console/ssh/web server failed due to incorrect username or password.
pnCommonEventObjs	1.3.6.1.4.1.8239.2.1.3.1			Branch for objects meant only to be sent in event varbinds.
NTF pnCommonEventPowerSupplyFailure	1.3.6.1.4.1.8239.2.1.3.2.0.2			One or more sources of power to the system has failed. A redundant power-supply has presumably taken over. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
NTF pnCommonEventPowerSupplyOk	1.3.6.1.4.1.8239.2.1.3.2.0.3			One or more previously failed sources of power is now working normally. The transition to normal condition happened without the system having to be restarted. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
pnCommonEvents	1.3.6.1.4.1.8239.2.1.3			Sub-tree for common MIB events.
NTF pnCommonEventThruputLimitExceeded	1.3.6.1.4.1.8239.2.1.3.2.0.5			The throughput of traffic through the device has exceeded the limit for which it has been licensed.
pnCommonMibModule	1.3.6.1.4.1.8239.1.1.3			A MIB module containing definitions of managed objects implemented by all Peribit Networks' products.
pnCommonObjs	1.3.6.1.4.1.8239.2.1.2			Sub-tree for common MIB objects.
pnSys	1.3.6.1.4.1.8239.2.1.2.1			Sub-tree for common system objects.
T/F pnSysDaylightSaving	1.3.6.1.4.1.8239.2.1.2.1.5	TruthValue	read-only	Whether daylight savings are currently in effect for the system's time zone.
STR pnSysHwVersion	1.3.6.1.4.1.8239.2.1.2.1.2	DisplayString	read-only	Hardware version of the unit.
STR pnSysSerialNumber	1.3.6.1.4.1.8239.2.1.2.1.3	DisplayString	read-only	The serial number of the unit. If not available, an empty string is returned.
STR pnSysSwVersion	1.3.6.1.4.1.8239.2.1.2.1.1	DisplayString	read-only	Full software version. The first two components of the full version are the major and minor versions. The third component indicates the maintenance release number and the fourth, the build number.
I32 pnSysTimeZoneOffset	1.3.6.1.4.1.8239.2.1.2.1.4	Integer32	read-only	The offset in seconds from UTC of the system's time zone. Values are negative for locations west of UTC and positive for locations east of UTC.

OID symbolic	OID numeric	Type	Access	Description
pnCommonMibModule	1.3.6.1.4.1.8239.1.1.3			A MIB module containing definitions of managed objects implemented by all Peribit Networks' products.
pnCommonConfMib	1.3.6.1.4.1.8239.2.1.1			Sub-tree for Sequence Reducer MIB conformance statements.
pnCommonObjs	1.3.6.1.4.1.8239.2.1.2			Sub-tree for common MIB objects.
pnSys	1.3.6.1.4.1.8239.2.1.2.1			Sub-tree for common system objects.
STR pnSysSwVersion	1.3.6.1.4.1.8239.2.1.2.1.1	DisplayString	read-only	Full software version. The first two components of the full version are the major and minor versions. The third component indicates the maintenance release number and the fourth, the build number.
STR pnSysHwVersion	1.3.6.1.4.1.8239.2.1.2.1.2	DisplayString	read-only	Hardware version of the unit.
STR pnSysSerialNumber	1.3.6.1.4.1.8239.2.1.2.1.3	DisplayString	read-only	The serial number of the unit. If not available, an empty string is returned.
I32 pnSysTimeZoneOffset	1.3.6.1.4.1.8239.2.1.2.1.4	Integer32	read-only	The offset in seconds from UTC of the system's time zone. Values are negative for locations west of UTC and positive for locations east of UTC.
T/F pnSysDaylightSaving	1.3.6.1.4.1.8239.2.1.2.1.5	TruthValue	read-only	Whether daylight savings are currently in effect for the system's time zone.
pnChassis	1.3.6.1.4.1.8239.2.1.2.2			Sub-tree for common chassis information.
TCC pnChassisType	1.3.6.1.4.1.8239.2.1.2.2.1	TcChassisType	read-only	Chassis type for this Peribit device.
pnCommonEvents	1.3.6.1.4.1.8239.2.1.3			Sub-tree for common MIB events.
pnCommonEventObjs	1.3.6.1.4.1.8239.2.1.3.1			Branch for objects meant only to be sent in event varbinds.
STR pnCommonEventDescr	1.3.6.1.4.1.8239.2.1.3.1.1	DisplayString	accessible-for-notify	String that provides a textual description of the event.
pnCommonEventEvents	1.3.6.1.4.1.8239.2.1.3.2			Branch for the events themselves.
pnCommonEventEventsV2	1.3.6.1.4.1.8239.2.1.3.2.0			Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
NTF pnCommonEventInFailSafeMode	1.3.6.1.4.1.8239.2.1.3.2.0.1			This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: o Fail-safe reboot was explicitly initiated by the user. o The device rebooted automatically too many times because of the failure of internal consistency checks or the failure of tests that verify proper operation of the device.
NTF pnCommonEventPowerSupplyFailure	1.3.6.1.4.1.8239.2.1.3.2.0.2			One or more sources of power to the system has failed. A redundant power-supply has presumably taken over. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
NTF pnCommonEventPowerSupplyOk	1.3.6.1.4.1.8239.2.1.3.2.0.3			One or more previously failed sources of power is now working normally. The transition to normal condition happened without the system having to be restarted. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
NTF pnCommonEventLicenseExpired	1.3.6.1.4.1.8239.2.1.3.2.0.4			The license for the system expired. As a result, the system will switch over to and stay in pass-through mode.
NTF pnCommonEventThruputLimitExceeded	1.3.6.1.4.1.8239.2.1.3.2.0.5			The throughput of traffic through the device has exceeded the limit for which it has been licensed.
NTF pnCommonEventLicenseWillExpire	1.3.6.1.4.1.8239.2.1.3.2.0.6			The license for the system is about to expire shortly. When it eventually does expire, the system will switch over to and stay in pass-through mode.
NTF pnCommonEventLoginFailure	1.3.6.1.4.1.8239.2.1.3.2.0.7			A user's login attempt via the console/ssh/web server failed due to incorrect username or password.
NTF pnCommonEventFaultTolerantPassThrough	1.3.6.1.4.1.8239.2.1.3.2.0.8			An anomalous health condition was detected. It would have subsequently triggered hardware pass through mode followed by a reboot.
NTF pnCommonEventFanFailure	1.3.6.1.4.1.8239.2.1.3.2.0.9			A cooling fan inside the device has failed. The 'pnCommonEventDescr' object has the name of the fan that failed.
NTF pnCommonEventFanSpeedVariation	1.3.6.1.4.1.8239.2.1.3.2.0.10			The speed of a cooling fan inside the device is either too low or too high. The 'pnCommonEventDescr' object has the name of the fan that has the problem.
NTF pnCommonEventFanOk	1.3.6.1.4.1.8239.2.1.3.2.0.11			A cooling fan inside the device that had previously failed or whose speed variation was high is now working properly. The 'pnCommonEventDescr' object has the name of the fan that has recovered.
NTF pnCommonEventInterfaceSpeedMismatch	1.3.6.1.4.1.8239.2.1.3.2.0.12			A mismatch is detected between the local and remote interface settings. This can happen due to a mismatch in the local and remote interface speed or mode.
NTF pnCommonEventInterfaceSpeedOk	1.3.6.1.4.1.8239.2.1.3.2.0.13			A mismatch previously detected between the local and remote interface settings is now resolved. The local and remote interface speed and mode are matched.
NTF pnCommonEventInterfaceDuplexMismatch	1.3.6.1.4.1.8239.2.1.3.2.0.14			A possible mismatch was detected between the duplex setting of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'pnCommonEventDescr' object. Note that this notification is quite different from pnCommonEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same Peribit device.
NTF pnCommonEventIpsecSecurityAssociationAdded	1.3.6.1.4.1.8239.2.1.3.2.0.15			An IPSec security association has been negotiated and added to security association database.
NTF pnCommonEventIpsecSecurityAssociationExpired	1.3.6.1.4.1.8239.2.1.3.2.0.16			An IPSec security association has been deleted from the security association database.
NTF pnCommonEventIpsecSecurityAssociationDeleted	1.3.6.1.4.1.8239.2.1.3.2.0.17			An IPSec security association has been deleted from the security association database.

DisplayString (4)
STR pnCommonEventDescr	1.3.6.1.4.1.8239.2.1.3.1.1	DisplayString	accessible-for-notify	String that provides a textual description of the event.
STR pnSysHwVersion	1.3.6.1.4.1.8239.2.1.2.1.2	DisplayString	read-only	Hardware version of the unit.
STR pnSysSerialNumber	1.3.6.1.4.1.8239.2.1.2.1.3	DisplayString	read-only	The serial number of the unit. If not available, an empty string is returned.
STR pnSysSwVersion	1.3.6.1.4.1.8239.2.1.2.1.1	DisplayString	read-only	Full software version. The first two components of the full version are the major and minor versions. The third component indicates the maintenance release number and the fourth, the build number.
Integer32 (1)
I32 pnSysTimeZoneOffset	1.3.6.1.4.1.8239.2.1.2.1.4	Integer32	read-only	The offset in seconds from UTC of the system's time zone. Values are negative for locations west of UTC and positive for locations east of UTC.
TcChassisType (1)
TCC pnChassisType	1.3.6.1.4.1.8239.2.1.2.2.1	TcChassisType	read-only	Chassis type for this Peribit device.
TruthValue (1)
T/F pnSysDaylightSaving	1.3.6.1.4.1.8239.2.1.2.1.5	TruthValue	read-only	Whether daylight savings are currently in effect for the system's time zone.
No type (26)
pnChassis	1.3.6.1.4.1.8239.2.1.2.2			Sub-tree for common chassis information.
pnCommonConfMib	1.3.6.1.4.1.8239.2.1.1			Sub-tree for Sequence Reducer MIB conformance statements.
pnCommonEventEvents	1.3.6.1.4.1.8239.2.1.3.2			Branch for the events themselves.
pnCommonEventEventsV2	1.3.6.1.4.1.8239.2.1.3.2.0			Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
NTF pnCommonEventFanFailure	1.3.6.1.4.1.8239.2.1.3.2.0.9			A cooling fan inside the device has failed. The 'pnCommonEventDescr' object has the name of the fan that failed.
NTF pnCommonEventFanOk	1.3.6.1.4.1.8239.2.1.3.2.0.11			A cooling fan inside the device that had previously failed or whose speed variation was high is now working properly. The 'pnCommonEventDescr' object has the name of the fan that has recovered.
NTF pnCommonEventFanSpeedVariation	1.3.6.1.4.1.8239.2.1.3.2.0.10			The speed of a cooling fan inside the device is either too low or too high. The 'pnCommonEventDescr' object has the name of the fan that has the problem.
NTF pnCommonEventFaultTolerantPassThrough	1.3.6.1.4.1.8239.2.1.3.2.0.8			An anomalous health condition was detected. It would have subsequently triggered hardware pass through mode followed by a reboot.
NTF pnCommonEventInFailSafeMode	1.3.6.1.4.1.8239.2.1.3.2.0.1			This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: o Fail-safe reboot was explicitly initiated by the user. o The device rebooted automatically too many times because of the failure of internal consistency checks or the failure of tests that verify proper operation of the device.
NTF pnCommonEventInterfaceDuplexMismatch	1.3.6.1.4.1.8239.2.1.3.2.0.14			A possible mismatch was detected between the duplex setting of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'pnCommonEventDescr' object. Note that this notification is quite different from pnCommonEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same Peribit device.
NTF pnCommonEventInterfaceSpeedMismatch	1.3.6.1.4.1.8239.2.1.3.2.0.12			A mismatch is detected between the local and remote interface settings. This can happen due to a mismatch in the local and remote interface speed or mode.
NTF pnCommonEventInterfaceSpeedOk	1.3.6.1.4.1.8239.2.1.3.2.0.13			A mismatch previously detected between the local and remote interface settings is now resolved. The local and remote interface speed and mode are matched.
NTF pnCommonEventIpsecSecurityAssociationAdded	1.3.6.1.4.1.8239.2.1.3.2.0.15			An IPSec security association has been negotiated and added to security association database.
NTF pnCommonEventIpsecSecurityAssociationDeleted	1.3.6.1.4.1.8239.2.1.3.2.0.17			An IPSec security association has been deleted from the security association database.
NTF pnCommonEventIpsecSecurityAssociationExpired	1.3.6.1.4.1.8239.2.1.3.2.0.16			An IPSec security association has been deleted from the security association database.
NTF pnCommonEventLicenseExpired	1.3.6.1.4.1.8239.2.1.3.2.0.4			The license for the system expired. As a result, the system will switch over to and stay in pass-through mode.
NTF pnCommonEventLicenseWillExpire	1.3.6.1.4.1.8239.2.1.3.2.0.6			The license for the system is about to expire shortly. When it eventually does expire, the system will switch over to and stay in pass-through mode.
NTF pnCommonEventLoginFailure	1.3.6.1.4.1.8239.2.1.3.2.0.7			A user's login attempt via the console/ssh/web server failed due to incorrect username or password.
pnCommonEventObjs	1.3.6.1.4.1.8239.2.1.3.1			Branch for objects meant only to be sent in event varbinds.
NTF pnCommonEventPowerSupplyFailure	1.3.6.1.4.1.8239.2.1.3.2.0.2			One or more sources of power to the system has failed. A redundant power-supply has presumably taken over. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
NTF pnCommonEventPowerSupplyOk	1.3.6.1.4.1.8239.2.1.3.2.0.3			One or more previously failed sources of power is now working normally. The transition to normal condition happened without the system having to be restarted. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
pnCommonEvents	1.3.6.1.4.1.8239.2.1.3			Sub-tree for common MIB events.
NTF pnCommonEventThruputLimitExceeded	1.3.6.1.4.1.8239.2.1.3.2.0.5			The throughput of traffic through the device has exceeded the limit for which it has been licensed.
pnCommonMibModule	1.3.6.1.4.1.8239.1.1.3			A MIB module containing definitions of managed objects implemented by all Peribit Networks' products.
pnCommonObjs	1.3.6.1.4.1.8239.2.1.2			Sub-tree for common MIB objects.
pnSys	1.3.6.1.4.1.8239.2.1.2.1			Sub-tree for common system objects.

RFC description

Peribit Networks common MIB containing managed objects implemented by all Peribit products.

Start monitoring Peribit Networks WAN optimization appliances (shared base objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PERIBIT-COMMON-MIB

This MIB depends on

Related MIBs

What Is PERIBIT-COMMON-MIB?

Supported Devices

Monitoring Examples

RFC description