| OID symbolic | OID numeric | Type | Access | Description |
|---|
| sysDevDslamMIBObjects | 1.3.6.1.4.1.1795.2.24.2.24.1 | | | |
| sysDevStats | 1.3.6.1.4.1.1795.2.24.2.24.1.1 | | | |
| loginHistTable | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1 | | not-accessible | This table shows the most recent 10 logins and all active users
currently accessing the device. It is indexed by userId
and loginTime. |
| loginHistTableEntry | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1 | | not-accessible | This object corresponds to an entry in the login history table. |
| STR loginUserId | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.1 | DisplayString | read-only | This object containes the user login id. |
| TIK loginTime | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.2 | TimeTicks | read-only | This object containes the login time in seconds
when the login session is established. |
| INT loginAccessApp | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.3 | INTEGER | read-only | This object describes the access application used
by the end user to access the device. This can be
done through console, using telnet or using ftp. |
| IP loginAccessHost | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.4 | IpAddress | read-only | This object containes the ip address of the network
management station when the access application is
telnet or ftp. In case of console, this object contains
0.0.0.0. |
| INT loginUserPriv | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.5 | INTEGER | read-only | This object containes the access privileges of the user. |
| INT loginStatus | 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.6 | INTEGER | read-only | This object indicates whether the user is still accessing the
device. |
| loginFailureCountTable | 1.3.6.1.4.1.1795.2.24.2.24.1.1.2 | | not-accessible | This table containes the statistics for login failures. It
is indexed by access type i.e console, telnet or ftp. |
| loginFailureCountTableEntry | 1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1 | | not-accessible | This object corresponds to an entry in the login failure count table. |
| INT loginFailureAccessApp | 1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.1 | INTEGER | read-only | This object describes the access application used
by the end user to access the device. This can be
done through console, using telnet or using ftp. |
| CTR loginFailureCount | 1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.2 | Counter | read-only | This object containes the number of unsuccesful logins for console,
ftp or telnet. |
| sysDevConfig | 1.3.6.1.4.1.1795.2.24.2.24.1.2 | | | |
| INT enablePowerSourceFailureAlarm | 1.3.6.1.4.1.1795.2.24.2.24.1.2.1 | INTEGER | read-write | This objects corresponds to enabling/disabling the
power source failure alarm - for both A and B power sources
This object is for the MCC only.
The default value of this object should be 1. |
| devIfTable | 1.3.6.1.4.1.1795.2.24.2.24.1.2.2 | | not-accessible | This table is used to configure information for a
particular interface |
| devIfTableEntry | 1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1 | | not-accessible | This object corresponds to an entry in the DevifTable |
| INT devPacketDiscardPolicy | 1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.1 | INTEGER | read-write | This object corresponds to the policy for packet discards
during periods of congestion :
mrrp - most recently received packets are discarded.
lrrp - least recently received packets are discarded.
The default value of this object should be 2 |
| INT devLinkIntegrity | 1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.2 | INTEGER | read-write | This object corresponds to the enabling or disabling of
the ethernet link integrity :
enable - enable link integrity
disable - disable link integrity
none - for interfaces that do not support link integrity
The default value of this object should be 1 |
| ADR trapDestAndPort | 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.2 | TAddress | read-only | The IP Address and Port of the destination to which a trap
must be sent. |
| INT trapsEnable | 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.3 | INTEGER | read-write | This object corresponds to turning traps on/off for a
particular destination.
enable (1) - traps will be sent to the specified destination.
disable (2)- traps will not be sent to the specified
destination.
The default value of this object should be 2. |
| ROW trapRowStatus | 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.4 | RowStatus | read-only | This object is used to add or delete a
a row from the table. |
| sysDevUserAccountTable | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5 | | not-accessible | This table contains the user accounts. |
| sysDevUserAccountEntry | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1 | | not-accessible | An entry containing user account information. |
| STR sysDevUserAccountUserId | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.1 | DisplayString | read-only | This object corresponds to the login ID of the
user account. |
| INT sysDevUserAccountPrivilege | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.2 | INTEGER | read-write | This object corresponds to the access privilege
of the user account. 1 = Operator, 2 = Administrator. |
| STR sysDevUserAccountUserPassword | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.3 | DisplayString | read-only | This object corresponds to the password of the
user account. |
| STR sysDevUserAccountAccessPartition | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.4 | DisplayString | read-write | This object corresponds to the access partition of the
user account. The default value of this object is 'all' |
| ROW sysDevUserAccountRowStatus | 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.5 | RowStatus | read-write | This object corresponds to create or delete a row in
sysDevUserAccountTable. |
| sysDevIDSLConfigTable | 1.3.6.1.4.1.1795.2.24.2.24.1.2.6 | | not-accessible | A table that contains configuration information about
IDSL Card. |
| sysDevIDSLConfigEntry | 1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1 | | not-accessible | A list of information for IDSL device Configuration. |
| IDS sysDevIDSLConfigPrimaryNetClockMode | 1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.1 | IdslClockMode | read-write | This object indicates the network clock mode set
for the primary network clock. IDSL portcards with a
port configured as an NT will be set to
portCardDriveClockOnboard(4), both driving the backplane
and using the clock for the other Local Timing transceivers
on the card. Port cards with only LT ports configured will
receive a clock from the backplane using portCardSinkClock(2).
portCardDriveClock(3) will drive the backplane alone. The
default value of this object is triState(1). |
| IDS sysDevIDSLConfigSecondaryNetClockMode | 1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.2 | IdslClockMode | read-write | This object indicates the network clock mode set
for the secondary network clock. IDSL portcards with a
port configured as an NT will be set to
portCardDriveClockOnboard(4), both driving the backplane
and using the clock for the other Local Timing transceivers
on the card. Port cards with only LT ports configured will
receive a clock from the backplane using portCardSinkClock(2).
portCardDriveClock(3) will drive the backplane alone. The
default value of this object is triState(1). |
| sysDevDslamSyslog | 1.3.6.1.4.1.1795.2.24.2.24.1.2.7 | | | |
| SWI sysDevSyslogFtpServerXferStatsEnable | 1.3.6.1.4.1.1795.2.24.2.24.1.2.7.1 | SwitchState | read-write | This object allows the network manager to enable and disable
syslog messages for FTP server file transfer statistics |
| SWI sysDevSyslogTftpServerXferStatsEnable | 1.3.6.1.4.1.1795.2.24.2.24.1.2.7.2 | SwitchState | read-write | This object allows the network manager to enable and disable
syslog messages for TFTP server file transfer statistics |
| sysDevDslamMIBTraps | 1.3.6.1.4.1.1795.2.24.2.24.2 | | | |
| NTF cCN | 1.3.6.1.4.1.1795.2.24.2.24.2.0.7 | | | This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class |
| NTF authenticationFailure | 1.3.6.1.4.1.1795.2.24.2.24.2.0.8 | | | This trap signifies an authentication failure. Authentication failures can be telnet based or terminal based. This trap is in addition to the SNMP based authentication failure trap, which is a generic trap. |
| NTF fanModuleFailure | 1.3.6.1.4.1.1795.2.24.2.24.2.0.9 | | | This trap indicates the indicates the failure of the fan module on the device. This trap is sent only by the MCC card. this trap is of 'minor' class |
| NTF powerSourceAFailure | 1.3.6.1.4.1.1795.2.24.2.24.2.0.10 | | | This trap indicates that power source A has failed. This is sent only by the MCC card. This trap is of 'minor' class. |
| NTF slotPollFailure | 1.3.6.1.4.1.1795.2.24.2.24.2.0.11 | | | This trap indicates a slot poll failure. This is sent only by the MCC card. this trap is of 'major' class. |
| NTF ethernetJabber | 1.3.6.1.4.1.1795.2.24.2.24.2.0.12 | | | This trap indicates that a jabber condition has been detected on the ethernet interface. This trap is of 'major' class. |
| NTF ethernetJumbos | 1.3.6.1.4.1.1795.2.24.2.24.2.0.13 | | | This trap indicates ethernet jumbos. this trap is of 'minor' class |
| NTF ethernetRunts | 1.3.6.1.4.1.1795.2.24.2.24.2.0.14 | | | This trap indicates ethernet runts. this trap is of 'minor' |
| NTF powerSourceBFailure | 1.3.6.1.4.1.1795.2.24.2.24.2.0.17 | | | This trap indicates that power source B has failed. This is sent only by the MCC card. This trap is of 'minor' class. |
| NTF nonIpConservativeCardDetected | 1.3.6.1.4.1.1795.2.24.2.24.2.0.18 | | | This trap indicates that a non ip conservative DSL card exist in the chassis at the slot 'slotNumber'.This is sent only by the MCC card. This trap is of warning class. |
| NTF nonSupportedMCC | 1.3.6.1.4.1.1795.2.24.2.24.2.0.20 | | | AN has detected MCC firmware release too low to support this device |
| NTF nonSupportedChassis | 1.3.6.1.4.1.1795.2.24.2.24.2.0.21 | | | AN in slot xx has been installed in a chassis that cannot support one or more of its features. |
| NTF fanModuleOperational | 1.3.6.1.4.1.1795.2.24.2.24.2.0.109 | | | This trap indicates the indicates the fan module on the device is operational. This trap is sent only by the MCC card. This trap is of 'minor' class |
| NTF powerSourceAOperational | 1.3.6.1.4.1.1795.2.24.2.24.2.0.110 | | | This trap indicates that the power source A is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSourceAFailure trap. |
| NTF newCardDetected | 1.3.6.1.4.1.1795.2.24.2.24.2.0.111 | | | This trap indicates that a new card was detected in a slot. This is sent only by the MCC card. this trap is of 'warning' class. |
| NTF ethernetJabberClear | 1.3.6.1.4.1.1795.2.24.2.24.2.0.112 | | | This trap indicates that the jabber condition that was detected no longer exists. This trap is of 'major' class. |
| NTF powerSourceBOperational | 1.3.6.1.4.1.1795.2.24.2.24.2.0.117 | | | This trap indicates that the power source B is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSourceBFailure trap. |
