PBI-MGSYSTEM-MIB

All MIBs › PBI-MGSYSTEM-MIB

Organization: PBI

Last Updated: 2006-09-13

Category: Video Conferencing

Description: Monitors PBI media gateway system health, including power supply status, fan state, and alarm conditions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PBI-MGSYSTEM-MIB?

This is a PBI vendor MIB focused specifically on media gateway system health monitoring, as indicated by its description covering power supply, fan, and alarm state. Although detailed object names were not provided, MIBs of this type typically expose environmental and status data including power supply presence/state, fan operational status, and general alarm/fault indicators for the chassis. Its central purpose is monitoring hardware status of the media gateway, specifically power supply health, fan/cooling status, and active alarm conditions, which are critical early-warning indicators for telecom equipment that must maintain high availability. As a vendor system MIB it likely depends on baseline SNMP entity/environmental conventions, though no explicit dependency is stated in the available description. It is typically deployed in telecom central offices or media gateway deployments where continuous voice/media processing uptime is critical. Engineers can download the PBI-MGSYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PBI-MGSYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

PBI media gateway system

Monitoring Examples

An administrator would poll power supply status objects to confirm both power supplies in a redundant pair are present and supplying power, and check fan status objects to ensure cooling fans are spinning at expected speed. An alarm table reporting an active critical alarm would reveal a power supply failure or overtemperature condition requiring immediate attention. Because no sample objects were available, exact table/object names would need to be confirmed against the compiled MIB, but this module is the primary source for environmental fault detection on the media gateway chassis.

What Can Be Monitored

power supply status
fan/cooling status
chassis alarm conditions
overall device health/fault state

Imported Objects

From PBI-MAIN-MIB

mg	OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
basicInfo	1.3.6.1.4.1.1070.3.1.1
INT chestTemp	1.3.6.1.4.1.1070.3.1.1.29	INTEGER	read-only	the chest Temperature
INT default	1.3.6.1.4.1.1070.3.1.1.12	INTEGER	read-write	Device renew to factory setup
IP deviceIP	1.3.6.1.4.1.1070.3.1.1.7	IpAddress	read-write	Local device IP address
STR deviceOffDescription	1.3.6.1.4.1.1070.3.1.1.16.1.6	DisplayString	read-only	Device Off
STR deviceOffDeviceIP	1.3.6.1.4.1.1070.3.1.1.16.1.2	DisplayString	read-only	device IP address
STR deviceOffDeviceName	1.3.6.1.4.1.1070.3.1.1.16.1.1	DisplayString	read-only	device name
STR deviceOffLevel	1.3.6.1.4.1.1070.3.1.1.16.1.4	DisplayString	read-only	Alarm level: level 2
STR deviceOffReserve	1.3.6.1.4.1.1070.3.1.1.16.1.3	DisplayString	read-only	device IP address
STR deviceOffTriggerTime	1.3.6.1.4.1.1070.3.1.1.16.1.5	DisplayString	read-only	Event trigger time
STR deviceOnDescription	1.3.6.1.4.1.1070.3.1.1.17.1.6	DisplayString	read-only	Description information
STR deviceOnDeviceIP	1.3.6.1.4.1.1070.3.1.1.17.1.2	DisplayString	read-only	device IP address
STR deviceOnDeviceName	1.3.6.1.4.1.1070.3.1.1.17.1.1	DisplayString	read-only	device name
STR deviceOnLevel	1.3.6.1.4.1.1070.3.1.1.17.1.4	DisplayString	read-only	Alarm leve: level 2
STR deviceOnReserve	1.3.6.1.4.1.1070.3.1.1.17.1.3	DisplayString	read-only	device IP address
STR deviceOnTriggerTime	1.3.6.1.4.1.1070.3.1.1.17.1.5	DisplayString	read-only	Event trigger time
INT deviceType	1.3.6.1.4.1.1070.3.1.1.13	INTEGER	read-write	Device type: 3000tm = 1111; 3000mux = 2222; 3000ec = 3333; 4000p = 4444; UDI4000Mx = 5555; reserve = 6666
T/F externdBoard	1.3.6.1.4.1.1070.3.1.1.15	TruthValue	read-write	Description
STR fanFailedDescription	1.3.6.1.4.1.1070.3.1.1.18.1.6	DisplayString	read-only	Description information
STR fanFailedDeviceIP	1.3.6.1.4.1.1070.3.1.1.18.1.2	DisplayString	read-only	device IP address
STR fanFailedDeviceName	1.3.6.1.4.1.1070.3.1.1.18.1.1	DisplayString	read-only	device name
STR fanFailedLevel	1.3.6.1.4.1.1070.3.1.1.18.1.4	DisplayString	read-only	Alarm level: level 1
STR fanFailedReserve	1.3.6.1.4.1.1070.3.1.1.18.1.3	DisplayString	read-only	device IP address
STR fanFailedTriggerTime	1.3.6.1.4.1.1070.3.1.1.18.1.5	DisplayString	read-only	Event trigger time
STR fpgaVersion	1.3.6.1.4.1.1070.3.1.1.3	DisplayString	read-only	FPGA version number
IP gateway	1.3.6.1.4.1.1070.3.1.1.6	IpAddress	read-write	Device gateway
STR hardwareVersion	1.3.6.1.4.1.1070.3.1.1.14	DisplayString	read-only	Device hardware version
INT lcdSwitch	1.3.6.1.4.1.1070.3.1.1.35	INTEGER	read-write	control LCD background
STR macAddress	1.3.6.1.4.1.1070.3.1.1.5	DisplayString	read-write	MAC address
STR mcuVersion	1.3.6.1.4.1.1070.3.1.1.4	DisplayString	read-only	MCU version number
mgSystem	1.3.6.1.4.1.1070.3.1			use this mib to manage the devise infomation
INT moduleNumber	1.3.6.1.4.1.1070.3.1.1.28	INTEGER	read-only	the module number
INT rebootCommand	1.3.6.1.4.1.1070.3.1.1.23	INTEGER	read-write	send reboot unit command: send 1 to Agent for reboot
STR serialNumber	1.3.6.1.4.1.1070.3.1.1.2	DisplayString	read-only	Device serial number
STR signalChangeChannel	1.3.6.1.4.1.1070.3.1.1.21.1.3	DisplayString	read-only	the channel for signal change trap
STR signalChangeDescription	1.3.6.1.4.1.1070.3.1.1.21.1.6	DisplayString	read-only	Description information
STR signalChangeDeviceIP	1.3.6.1.4.1.1070.3.1.1.21.1.2	DisplayString	read-only	device IP address
STR signalChangeDeviceName	1.3.6.1.4.1.1070.3.1.1.21.1.1	DisplayString	read-only	device name
STR signalChangeLevel	1.3.6.1.4.1.1070.3.1.1.21.1.4	DisplayString	read-only	Alarm level: level 3
STR signalChangeSlot	1.3.6.1.4.1.1070.3.1.1.21.1.7	DisplayString	read-only	Slot number
STR signalChangeTriggerTime	1.3.6.1.4.1.1070.3.1.1.21.1.5	DisplayString	read-only	Event trigger time
STR signalOffChannel	1.3.6.1.4.1.1070.3.1.1.19.1.3	DisplayString	read-only	the channel for signal off trap
STR signalOffDescription	1.3.6.1.4.1.1070.3.1.1.19.1.6	DisplayString	read-only	Description information
STR signalOffDeviceIP	1.3.6.1.4.1.1070.3.1.1.19.1.2	DisplayString	read-only	device IP address
STR signalOffDeviceName	1.3.6.1.4.1.1070.3.1.1.19.1.1	DisplayString	read-only	device name
STR signalOffLevel	1.3.6.1.4.1.1070.3.1.1.19.1.4	DisplayString	read-only	Alarm level: level 3
STR signalOffSlot	1.3.6.1.4.1.1070.3.1.1.19.1.7	DisplayString	read-only	Slot number
STR signalOffTriggerTime	1.3.6.1.4.1.1070.3.1.1.19.1.5	DisplayString	read-only	Event trigger time
STR signalOnChannel	1.3.6.1.4.1.1070.3.1.1.20.1.3	DisplayString	read-only	the channel for signal on trap
STR signalOnDescription	1.3.6.1.4.1.1070.3.1.1.20.1.6	DisplayString	read-only	Description information
STR signalOnDeviceIP	1.3.6.1.4.1.1070.3.1.1.20.1.2	DisplayString	read-only	device IP address
STR signalOnDeviceName	1.3.6.1.4.1.1070.3.1.1.20.1.1	DisplayString	read-only	device name
STR signalOnLevel	1.3.6.1.4.1.1070.3.1.1.20.1.4	DisplayString	read-only	Alarm level: level 3
STR signalOnSlot	1.3.6.1.4.1.1070.3.1.1.20.1.7	DisplayString	read-only	Slot number
STR signalOnTriggerTime	1.3.6.1.4.1.1070.3.1.1.20.1.5	DisplayString	read-only	Event trigger time
IP subnetMask	1.3.6.1.4.1.1070.3.1.1.8	IpAddress	read-write	Device subnet mask
trapDeviceOffEntry	1.3.6.1.4.1.1070.3.1.1.16.1		not-accessible	Row Description
trapDeviceOffTable	1.3.6.1.4.1.1070.3.1.1.16		not-accessible	Description
trapDeviceOnEntry	1.3.6.1.4.1.1070.3.1.1.17.1		not-accessible	Row Description
trapDeviceOnTable	1.3.6.1.4.1.1070.3.1.1.17		not-accessible	Description
trapFanFailedEntry	1.3.6.1.4.1.1070.3.1.1.18.1		not-accessible	Row Description
trapFanFailedTable	1.3.6.1.4.1.1070.3.1.1.18		not-accessible	Description
IP trapIpAddress	1.3.6.1.4.1.1070.3.1.1.9	IpAddress	read-write	Trap IP address,can been set in device and send trap data to the appointed PC
trapSignalChangeEntry	1.3.6.1.4.1.1070.3.1.1.21.1		not-accessible	Row Description
trapSignalChangeTable	1.3.6.1.4.1.1070.3.1.1.21		not-accessible	Description
trapSignalOffEntry	1.3.6.1.4.1.1070.3.1.1.19.1		not-accessible	Row Description
trapSignalOffTable	1.3.6.1.4.1.1070.3.1.1.19		not-accessible	Description
trapSignalOnEntry	1.3.6.1.4.1.1070.3.1.1.20.1		not-accessible	Row Description
trapSignalOnTable	1.3.6.1.4.1.1070.3.1.1.20		not-accessible	Description
trapTSBitRateNormalEntry	1.3.6.1.4.1.1070.3.1.1.26.1		not-accessible	Row Description
trapTSBitRateNormalTable	1.3.6.1.4.1.1070.3.1.1.26		not-accessible	Description
trapTSIDErrorEntry	1.3.6.1.4.1.1070.3.1.1.24.1		not-accessible	Row Description
trapTSIDErrorTable	1.3.6.1.4.1.1070.3.1.1.24		not-accessible	Description
trapTSIDRightEntry	1.3.6.1.4.1.1070.3.1.1.25.1		not-accessible	Row Description
trapTSIDRightTable	1.3.6.1.4.1.1070.3.1.1.25		not-accessible	Description
trapTSOverflowEntry	1.3.6.1.4.1.1070.3.1.1.22.1		not-accessible	Row Description
trapTSOverflowTable	1.3.6.1.4.1.1070.3.1.1.22		not-accessible	Description
STR tsBitRateNormalChannel	1.3.6.1.4.1.1070.3.1.1.26.1.3	DisplayString	read-only	the channel for TS bit rate normal trap
STR tsBitRateNormalDescription	1.3.6.1.4.1.1070.3.1.1.26.1.6	DisplayString	read-only	Description information
STR tsBitRateNormalDeviceIP	1.3.6.1.4.1.1070.3.1.1.26.1.2	DisplayString	read-only	device IP address
STR tsBitRateNormalDeviceName	1.3.6.1.4.1.1070.3.1.1.26.1.1	DisplayString	read-only	device name
STR tsBitRateNormalLevel	1.3.6.1.4.1.1070.3.1.1.26.1.4	DisplayString	read-only	Alarm level: level 1
STR tsBitRateNormalSlot	1.3.6.1.4.1.1070.3.1.1.26.1.7	DisplayString	read-only	Slot number
STR tsBitRateNormalTriggerTime	1.3.6.1.4.1.1070.3.1.1.26.1.5	DisplayString	read-only	Event trigger time
STR tsIDErrorDescription	1.3.6.1.4.1.1070.3.1.1.24.1.6	DisplayString	read-only	Description information
STR tsIDErrorDeviceIP	1.3.6.1.4.1.1070.3.1.1.24.1.2	DisplayString	read-only	device IP address
STR tsIDErrorDeviceName	1.3.6.1.4.1.1070.3.1.1.24.1.1	DisplayString	read-only	device name
STR tsIDErrorLevel	1.3.6.1.4.1.1070.3.1.1.24.1.4	DisplayString	read-only	Alarm level: level 1
STR tsIDErrorSlot	1.3.6.1.4.1.1070.3.1.1.24.1.7	DisplayString	read-only	Slot number
STR tsIDErrorTriggerTime	1.3.6.1.4.1.1070.3.1.1.24.1.5	DisplayString	read-only	Event trigger time
STR tsIDErrorTsID	1.3.6.1.4.1.1070.3.1.1.24.1.3	DisplayString	read-only	wrong ts id
STR tsIDRightDescription	1.3.6.1.4.1.1070.3.1.1.25.1.6	DisplayString	read-only	Description information
STR tsIDRightDeviceIP	1.3.6.1.4.1.1070.3.1.1.25.1.2	DisplayString	read-only	device IP address
STR tsIDRightDeviceName	1.3.6.1.4.1.1070.3.1.1.25.1.1	DisplayString	read-only	device name
STR tsIDRightLevel	1.3.6.1.4.1.1070.3.1.1.25.1.4	DisplayString	read-only	Alarm level: level 1
STR tsIDRightSlot	1.3.6.1.4.1.1070.3.1.1.25.1.7	DisplayString	read-only	Slot number
STR tsIDRightTriggerTime	1.3.6.1.4.1.1070.3.1.1.25.1.5	DisplayString	read-only	Event trigger time
STR tsIDRightTSID	1.3.6.1.4.1.1070.3.1.1.25.1.3	DisplayString	read-only	right ts id
STR tsOverflowChannel	1.3.6.1.4.1.1070.3.1.1.22.1.3	DisplayString	read-only	the channel for TS overflow trap
STR tsOverflowDescription	1.3.6.1.4.1.1070.3.1.1.22.1.6	DisplayString	read-only	Description information
STR tsOverflowDeviceIP	1.3.6.1.4.1.1070.3.1.1.22.1.2	DisplayString	read-only	device IP address
STR tsOverflowDeviceName	1.3.6.1.4.1.1070.3.1.1.22.1.1	DisplayString	read-only	device name
STR tsOverflowLevel	1.3.6.1.4.1.1070.3.1.1.22.1.4	DisplayString	read-only	Alarm level: level 1
STR tsOverflowSlot	1.3.6.1.4.1.1070.3.1.1.22.1.7	DisplayString	read-only	Slot number
STR tsOverflowTriggerTime	1.3.6.1.4.1.1070.3.1.1.22.1.5	DisplayString	read-only	Event trigger time
STR unitName	1.3.6.1.4.1.1070.3.1.1.1	DisplayString	read-write	Digital headend device name
INT upgrade	1.3.6.1.4.1.1070.3.1.1.10	INTEGER	read-write	if it is enable,it will been permitted to upgrade by network,otherwise disable
IP upgradeIP	1.3.6.1.4.1.1070.3.1.1.11	IpAddress	read-write	Upgrade IP address can been set by manual in device, we can upgrade software version when new software be released
STR virtualGroupInfo	1.3.6.1.4.1.1070.3.1.1.27	DisplayString	read-write	virtual group info

RFC description

PBI digital headend device management covering system information, network settings, and device configuration.

Start monitoring PBI media gateway systems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PBI-MGSYSTEM-MIB

What Is PBI-MGSYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description