OPTIX-SDH-TRAPS-MIB

All MIBs › OPTIX-SDH-TRAPS-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2006-04-14

Category: Optical Networking

Description: Defines SNMP trap notifications for SDH fault and threshold events on Huawei OptiX transport equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OPTIX-SDH-TRAPS-MIB?

OPTIX-SDH-TRAPS-MIB is a Huawei-proprietary SNMP module that defines trap notifications for SDH fault and threshold-crossing events on Huawei OptiX transport equipment. It belongs to the fault/alarm-notification category of MIBs, existing to alert management systems asynchronously when a problem condition occurs on the transport platform rather than exposing polled status tables itself. This MIB's role in status monitoring is entirely event-driven: it is how the equipment communicates hardware or transmission faults, such as loss of signal, alarm indication signals, or performance thresholds being crossed, to a network management system in near-real time, complementing performance MIBs like OPTIX-SDH-PER-MIB that report the underlying counters. It works alongside other Huawei OptiX MIBs (system, performance, RMON) that supply the actual object definitions the traps reference, and conceptually parallels standard alarm/notification conventions used in SDH network management. It is typically deployed by telecom operators running Huawei OptiX SDH networks who need immediate trap-based alerting for transmission faults, integrated into a carrier-grade NMS or alarm-correlation system. Engineers can download the OPTIX-SDH-TRAPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OPTIX-SDH-TRAPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei OptiX SDH transmission equipment

Monitoring Examples

No sample objects were captured for this MIB, so specific trap or variable-binding names cannot be confirmed from source, but consistent with its stated purpose, a monitoring system would register to receive traps for SDH fault conditions such as loss of signal/frame and threshold-crossing alerts on performance counters. Receiving a burst of such traps from the same network element would indicate an active fault or degrading link requiring immediate attention. This description should be verified against the actual trap definitions in the MIB source, since no concrete object names were available.

What Can Be Monitored

SDH fault alarm notifications
threshold-crossing alert notifications

Imported Objects

From OPTIX-OID-MIB

optixCommonSdh

OBJECT-IDENTITY

From OPTIX-SDH-ALM-MIB

almCurAlarmDataBid	OBJECT-TYPE
almCurAlarmDataEid	OBJECT-TYPE
almCurAlarmDataEndTime	OBJECT-TYPE
almCurAlarmDataNID	OBJECT-TYPE
almCurAlarmDataPara	OBJECT-TYPE
almCurAlarmDataSeverity	OBJECT-TYPE
almCurAlarmDataStartTime	OBJECT-TYPE
almCurAlarmDataState	OBJECT-TYPE
almCurAlarmDataTableStatus	OBJECT-TYPE

From OPTIX-SDH-TC-MIB

SdhAlarmEventType
SdhPerformanceEventType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
mgmt

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
optixSdhTraps	1.3.6.1.4.1.2011.2.25.3.10.40			This module describes rules of Huawei transmit platform self-defined types.
optixTrapsCommon	1.3.6.1.4.1.2011.2.25.3.10.40.10
G32 evtBoardNo	1.3.6.1.4.1.2011.2.25.3.10.40.10.10	Gauge32	read-only	Card No.:between 1 and 20
G32 evtOpticalPort	1.3.6.1.4.1.2011.2.25.3.10.40.10.20	Gauge32	read-only	Optical port No.:values depend on type of card
G32 evtPathNumber	1.3.6.1.4.1.2011.2.25.3.10.40.10.30	Gauge32	read-only	Path No.:values depend on type of card
SDH evtPerEventID	1.3.6.1.4.1.2011.2.25.3.10.40.10.40	SdhPerformanceEventType	read-only	Event ID:values depend on type of card
G32 evtDataValue	1.3.6.1.4.1.2011.2.25.3.10.40.10.50	Gauge32	read-only	PM parameter value.
SDH evtAlmEventID	1.3.6.1.4.1.2011.2.25.3.10.40.10.60	SdhAlarmEventType	read-only	Event ID:values depend on type of card
DAT evtStartTime	1.3.6.1.4.1.2011.2.25.3.10.40.10.70	DateAndTime	read-only	start date and time.
DAT evtEndTime	1.3.6.1.4.1.2011.2.25.3.10.40.10.80	DateAndTime	read-only	end date and time.
G32 evtKeepTime	1.3.6.1.4.1.2011.2.25.3.10.40.10.90	Gauge32	read-only	Event Keep Time, Unit: Second
INT evtEventStatus	1.3.6.1.4.1.2011.2.25.3.10.40.10.100	INTEGER	read-only	Event Status: Start/End
INT evtAlmSeverity	1.3.6.1.4.1.2011.2.25.3.10.40.10.110	INTEGER	read-only	Alarm severity.
INT evtPerPeriod	1.3.6.1.4.1.2011.2.25.3.10.40.10.120	INTEGER	read-only	PM period type: 15 minutes period or one day period.
optixTraps	1.3.6.1.4.1.2011.2.25.3.10.40.20
optixTrapsHisDataEvent	1.3.6.1.4.1.2011.2.25.3.10.40.20.10
NTF evt15mHistoryDataEvents	1.3.6.1.4.1.2011.2.25.3.10.40.20.10.1			Automatic report evt15mHistoryDataEvents
NTF evt24hHistoryDataEvents	1.3.6.1.4.1.2011.2.25.3.10.40.20.10.2			Automatic report evt24hHistoryDataEvents
optixTrapsThresholdCrossingEvent	1.3.6.1.4.1.2011.2.25.3.10.40.20.20
NTF evt15mThresholdCrossingEvents	1.3.6.1.4.1.2011.2.25.3.10.40.20.20.1			Automatic report 15 minutes threshold crossing
NTF evt24hThresholdCrossingEvents	1.3.6.1.4.1.2011.2.25.3.10.40.20.20.2			Automatic report one day threshold crossing
optixTrapsUATEvent	1.3.6.1.4.1.2011.2.25.3.10.40.20.30
NTF rsUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.6			Automatic report RS UAT event.
NTF msUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.22			Automatic report MS UAT event.
NTF msFarEndUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.33			Automatic report MS FEUAT event.
NTF hpUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.54			Automatic report HP UAT event.
NTF hpFarEndUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.76			Automatic report HP FEUAT event.
NTF lpFarEndUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.142			Automatic report LP FEUAT event.
NTF lpUnavailableTime	1.3.6.1.4.1.2011.2.25.3.10.40.20.30.150			Automatic report LP UAT event.
optixTrapsCSESEvent	1.3.6.1.4.1.2011.2.25.3.10.40.20.40
NTF rsConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.7			Automatic report RS CSES event.
NTF msConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.23			Automatic report MS CSES event.
NTF msFarEndConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.24			Automatic report MS FECSES event.
NTF hpConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.55			Automatic report HP CSES event.
NTF hpFarEndConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.56			Automatic report HP FECSES event.
NTF lpConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.151			Automatic report LP CSES event.
NTF lpFarEndConsecutiveSeverelyErroredSecond	1.3.6.1.4.1.2011.2.25.3.10.40.20.40.152			Automatic report LP FECSES event.
optixTrapsAlarm	1.3.6.1.4.1.2011.2.25.3.10.40.20.50
NTF criticalAlarm	1.3.6.1.4.1.2011.2.25.3.10.40.20.50.1			Critical Alarm
NTF majorAlarm	1.3.6.1.4.1.2011.2.25.3.10.40.20.50.2			Major Alarm
NTF minorAlarm	1.3.6.1.4.1.2011.2.25.3.10.40.20.50.3			Minor Alarm
NTF warningAlarm	1.3.6.1.4.1.2011.2.25.3.10.40.20.50.4			Warning Alarm
optixSdhTrapsConformance	1.3.6.1.4.1.2011.2.25.3.10.40.99
optixSdhTrapsGroups	1.3.6.1.4.1.2011.2.25.3.10.40.99.1
currentObjectGroup	1.3.6.1.4.1.2011.2.25.3.10.40.99.1.1			Enter the description of the created OBJECT-GROUP.
currentNotificationGroup	1.3.6.1.4.1.2011.2.25.3.10.40.99.1.2			Enter the description of the created NOTIFICATION-GROUP.
optixSdhTrapsCompliances	1.3.6.1.4.1.2011.2.25.3.10.40.99.2
optixSdhTrapsbasicCompliance	1.3.6.1.4.1.2011.2.25.3.10.40.99.2.1			Enter the description of the created MODULE-COMPLIANCE.

RFC description

Defines trap notifications for OPTIX SDH transmission platform including performance events and alarm conditions on optical equipment.

Start monitoring Huawei OptiX SDH transmission equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OPTIX-SDH-TRAPS-MIB

What Is OPTIX-SDH-TRAPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description