ONEACCESS-CONFIGMGMT-MIB

All MIBs › ONEACCESS-CONFIGMGMT-MIB

Organization: OneAccess

Last Updated: 2011-10-27

Category: CPE/Router

Description: Manages configuration file operations including backup, restore, and versioning on OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ONEACCESS-CONFIGMGMT-MIB?

ONEACCESS-CONFIGMGMT-MIB is a OneAccess enterprise MIB for configuration management on OneAccess CPE routers, covering operations such as backing up, restoring, and versioning device configuration files. The module description provided is only "Contact updated" and no sample objects were supplied, so exact table/object names cannot be confirmed, but per the short description it would expose objects to trigger a configuration backup/restore operation, track configuration file versions, and report operation status/results. It would be used to monitor the software-configuration state of the device — verifying that the running configuration matches a known-good saved version and that backup/restore operations complete successfully — a software-integrity/change-management health check rather than a hardware sensor reading. No specific external MIB dependency is evident from the available data. It is typically deployed on OneAccess CPE routers in managed-service-provider environments requiring centralized configuration backup/version control across many remote CPEs. Engineers can download the ONEACCESS-CONFIGMGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ONEACCESS-CONFIGMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE routers

Monitoring Examples

No sample objects were provided for this MIB, so specific object/table names cannot be confirmed; based on the short description, an operator would be expected to trigger and monitor a configuration backup or restore operation, check its completion status/result code, and compare configuration version identifiers to detect drift from the intended baseline, but exact object names are not available from the given data.

What Can Be Monitored

configuration backup/restore operation status
configuration file version identifier

Imported Objects

From ONEACCESS-GLOBAL-REG

oacExpIMManagement	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY
oacRequirements	OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacConfigMgmtMIBModule	1.3.6.1.4.1.13191.1.100.2001			Contact updated
oacCMConformance	1.3.6.1.4.1.13191.5.2001
oacCMGroups	1.3.6.1.4.1.13191.5.2001.1
oacCMGeneralGroup	1.3.6.1.4.1.13191.5.2001.1.1			This group is mandatory for Configuration Management entity.
oacCMCompliances	1.3.6.1.4.1.13191.5.2001.2
oacCMCompliance	1.3.6.1.4.1.13191.5.2001.2.1			The compliance statement for agents that support the ONEACCESS-CONFIGMGMT-MIB.
oacExpIMConfigMgmt	1.3.6.1.4.1.13191.10.3.4.6
oacConfigMgmtObjects	1.3.6.1.4.1.13191.10.3.4.6.1
oacCMHistory	1.3.6.1.4.1.13191.10.3.4.6.1.1
DAT oacCMHistoryRunningLastChanged	1.3.6.1.4.1.13191.10.3.4.6.1.1.1	DateAndTime	read-only	The time when the running configuration was last changed.
DAT oacCMHistoryRunningLastSaved	1.3.6.1.4.1.13191.10.3.4.6.1.1.2	DateAndTime	read-only	The time when the running configuration was last saved (written).
DAT oacCMHistoryStartupLastChanged	1.3.6.1.4.1.13191.10.3.4.6.1.1.3	DateAndTime	read-only	The time when the startup configuration was last written to.
oacCMCopy	1.3.6.1.4.1.13191.10.3.4.6.1.2
IP oacCMCopyIndex	1.3.6.1.4.1.13191.10.3.4.6.1.2.1	IpAddress	not-accessible	IP address used for configuration copy.
oacCMCopyTftpRunTable	1.3.6.1.4.1.13191.10.3.4.6.1.2.2		not-accessible	Config Table for TFTP copy of running config.
oacCMCopyTftpRunEntry	1.3.6.1.4.1.13191.10.3.4.6.1.2.2.1		not-accessible	List of objects defining a conceptual copy tftp entry.
STR oacCMCopyTftpRun	1.3.6.1.4.1.13191.10.3.4.6.1.2.2.1.1	DisplayString	read-write	Name of the file on the server where the configuration script is located. This variable is in effect a write-only variable. Attempts to read this variable will result in a no-such-object response.
oacCMCopyRunTftpTable	1.3.6.1.4.1.13191.10.3.4.6.1.2.3		not-accessible	Config Table for copy of running config to tftp.
oacCMCopyRunTftpEntry	1.3.6.1.4.1.13191.10.3.4.6.1.2.3.1		not-accessible	List of objects defining a conceptual copy tftp entry.
STR oacCMCopyRunTftp	1.3.6.1.4.1.13191.10.3.4.6.1.2.3.1.1	DisplayString	read-write	Name of the file on the server where the configuration script will be stored. This variable is in effect a write-only variable. Attempts to read this variable will result in a no-such-object response.
oacConfigMgmtNotifications	1.3.6.1.4.1.13191.10.3.4.6.1.3
NTF oacCMRunningConfigSaved	1.3.6.1.4.1.13191.10.3.4.6.1.3.1			The running configuration has been saved.

RFC description

Configuration management for OneOS equipment, tracking changes to device configuration state.

Start monitoring OneAccess CPE router (configuration backup/restore) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ONEACCESS-CONFIGMGMT-MIB

What Is ONEACCESS-CONFIGMGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description