ONEACCESS-IP-SERVICES-MIB

All MIBs › ONEACCESS-IP-SERVICES-MIB

Organization: OneAccess

Last Updated: 2011-07-29

Category: CPE/Router

Description: Manages IP services including DNS, DHCP, and routing protocol configuration on OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ONEACCESS-IP-SERVICES-MIB?

ONEACCESS-IP-SERVICES-MIB is a vendor-specific SNMP module from OneAccess that manages IP service configuration on OneAccess CPE routers, covering areas such as DNS, DHCP, and routing protocol settings. It is oriented toward configuration-style data for these IP services rather than raw traffic counters, letting administrators verify how DNS resolution, DHCP address assignment, and routing are configured on the device. Its monitoring relevance is more about configuration/service status than classic hardware health, though it can surface whether key IP services (like DHCP serving or DNS forwarding) are enabled and functioning as expected on the router. It likely builds on standard IETF MIBs for DNS/DHCP concepts and integrates with the router's core system and interface MIBs. It is deployed in enterprise branch or SMB environments where OneAccess routers provide integrated WAN and LAN IP services. Engineers can download the ONEACCESS-IP-SERVICES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ONEACCESS-IP-SERVICES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE router

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be cited. Based on its description, monitoring would plausibly involve checking DHCP service status/lease information and DNS forwarder configuration to confirm these IP services are operating as configured. An administrator might use such data to verify that DHCP is actively leasing addresses on a branch LAN or that DNS forwarding is correctly pointed at the intended upstream resolvers. Without concrete identifiers, this remains a general rather than object-grounded scenario.

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From ONEACCESS-GLOBAL-REG

oacExpIMIp	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacIpServicesConfigMIB	1.3.6.1.4.1.13191.1.100.683			fixed compilation issues
oacIpServicesConfig	1.3.6.1.4.1.13191.10.3.1.8
oacIpServicesConfigObjects	1.3.6.1.4.1.13191.10.3.1.8.1
oacIpServicesDnsConfigObjects	1.3.6.1.4.1.13191.10.3.1.8.1.1
STR oacIpDnsConfigDomainName	1.3.6.1.4.1.13191.10.3.1.8.1.1.1	DisplayString	read-write	Configuration of the Domain Name.
IP oacIpDnsConfigMainAdd	1.3.6.1.4.1.13191.10.3.1.8.1.1.2	IpAddress	read-write	The main domain server IP address
IP oacIpDnsConfigSndAdd	1.3.6.1.4.1.13191.10.3.1.8.1.1.3	IpAddress	read-write	The secondary domain server IP address
INT oacIpDnsConfigTimeout	1.3.6.1.4.1.13191.10.3.1.8.1.1.4	INTEGER	read-write	The duration (default is 150 seconds) to wait for the name server answer
oacIpServicesDHCPCConfigObjects	1.3.6.1.4.1.13191.10.3.1.8.1.2
INT oacDhcpClientAutoRestartAtm	1.3.6.1.4.1.13191.10.3.1.8.1.2.1	INTEGER	read-write	DHCP Client specific behavior
INT oacDhcpClientBroadcastFlag	1.3.6.1.4.1.13191.10.3.1.8.1.2.2	INTEGER	read-write	Activation or not of the broadcast flag in DHCP Offer/Ack message, so that the server is made aware if the DHCP packets are unicast or broadcast
OCT oacDhcpVendorId	1.3.6.1.4.1.13191.10.3.1.8.1.2.3	OCTET STRING	read-write	To include the option 60 within the DISCOVER messages and to append a proprietary vendor-ID string
oacIpDhcpClientInterfaceTable	1.3.6.1.4.1.13191.10.3.1.8.1.2.4		not-accessible	This table contains the Additional DHCP Client configuration on interfaces. The ifIndex in the INDEX clause identifies the interface where these options are applied.
oacIpDhcpClientInterfaceEntry	1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1		not-accessible	An entry in this table defines the additional option(s) sent by the DHCP Client.
STR oacIpDhcpClientInterfaceIfName	1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.1	DisplayString	read-only	The name of the interface where the Dhcp Client is associated. Same as ifDescr from IF-MIB
T/F oacIpDhcpClientInterfaceIgnoreDefRoute	1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.2	TruthValue	read-create	Do not insert default route in routing table
T/F oacIpDhcpClientInterfaceLeaseOptLess	1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.3	TruthValue	read-create	Remove lease option 51 parameter
STR oacIpDhcpClientInterfaceUserClassId	1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.4	DisplayString	read-create	Insert option 77 user class, if void option 77 is not inserted
ROW oacIpDhcpClientInterfaceRowStatus	1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.5	RowStatus	read-create	The row status for this rule.
oacIpDhcpAddClientInterfaceTable	1.3.6.1.4.1.13191.10.3.1.8.1.2.5		not-accessible	This table contains the DHCP Client configuration on interfaces. The ifIndex in the INDEX clause identifies the interface where the DHCP Client is activated.
oacIpDhcpAddClientInterfaceEntry	1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1		not-accessible	An entry in this table defines the interface where the DHCP Client is activated.
T/F oacIpDhcpAddClientInterfaceActivate	1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.1	TruthValue	read-create	Activate the DHCP Client on the interface.
STR oacIpDhcpAddClientInterfaceIfName	1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.2	DisplayString	read-only	The name of the interface where the Dhcp Client is associated. Same as ifDescr from IF-MIB
STR oacIpDhcpAddClientInterfaceClientId	1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.3	DisplayString	read-create	Set of the Client Identifier. The optional argument indicates which MAC address shall be used in the DHCP DISCOVER message. When the optional client-id argument is not present, the DHCP DISCOVER message uses the MAC address of the interface otherwise if present it uses the client-id string value.
STR oacIpDhcpAddClientInterfaceHostname	1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.4	DisplayString	read-create	Set of the Hostname.
ROW oacIpDhcpAddClientInterfaceRowStatus	1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.5	RowStatus	read-create	The row status for this rule.
oacIpServicesArpProxyConfigObjects	1.3.6.1.4.1.13191.10.3.1.8.1.3
oacIpProxyArpInterfaceConfigTable	1.3.6.1.4.1.13191.10.3.1.8.1.3.1		not-accessible	This table contains the Proxy ARP configuration on interfaces. The ifIndex in the INDEX clause identifies the interface where Proxy ARP is applied
oacIpProxyArpInterfaceConfigEntry	1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1		not-accessible	An entry in this table defines the interface where the Proxy ARP is configured.
T/F oacIpProxyArpInterfaceConfigActivate	1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1.1	TruthValue	read-create	Activate Proxy Arp.
STR oacIpProxyArpInterfaceConfigIfName	1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1.2	DisplayString	read-only	The name of the interface where Proxy Arp is activated. Same as ifDescr from IF-MIB
ROW oacIpProxyArpInterfaceConfigRowStatus	1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1.3	RowStatus	read-create	The Row Status for this rule.
oacIpServicesIcmpRedirConfigObjects	1.3.6.1.4.1.13191.10.3.1.8.1.4
T/F oacIpIcmpRedirConfigActivate	1.3.6.1.4.1.13191.10.3.1.8.1.4.1	TruthValue	read-write	Enable ICMP host redirects.
INT oacIpIcmpRedirConfigRedirRoutesActivate	1.3.6.1.4.1.13191.10.3.1.8.1.4.2	INTEGER	read-write	Enable learning icmp redirect routes. It is possible to define the timeout (in seconds) of redirect routes See below the meaning of the different values : - Default timeout 180s - 0 Value to disable learning icmp redirect routes (default behaviour) - Timeout of redirect routes (seconds)
INT oacIpIcmpRedirConfigRateLimitUnreach	1.3.6.1.4.1.13191.10.3.1.8.1.4.3	INTEGER	read-write	rate limit icmp messages generated. See below the meaning of the different values : - Default value 500ms - 0 Default behaviour - Once per milliseconds
oacIpServicesConfigConformance	1.3.6.1.4.1.13191.10.3.1.8.2
oacIpServicesGroups	1.3.6.1.4.1.13191.10.3.1.8.2.1
oacIpServicesConfigGroup	1.3.6.1.4.1.13191.10.3.1.8.2.1.1			Group of IP Servicesobjects
oacIpServicesCompls	1.3.6.1.4.1.13191.10.3.1.8.2.2

RFC description

OneAccess ONEOS router vendor-private MIB for IP services configuration including DHCP client, DNS, and ARP management.

Start monitoring OneAccess CPE router (DNS/DHCP/routing IP services) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ONEACCESS-IP-SERVICES-MIB

What Is ONEACCESS-IP-SERVICES-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description