ONEACCESS-CELLULAR-MIB

All MIBs › ONEACCESS-CELLULAR-MIB

Organization: OneAccess

Last Updated: 2014--0-4-

Category: CPE/Router

Description: Manages cellular WAN interface status, signal quality, and data session statistics on OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ONEACCESS-CELLULAR-MIB?

ONEACCESS-CELLULAR-MIB is a vendor-specific SNMP module from OneAccess covering cellular WAN interfaces on OneAccess customer-premises equipment (CPE) routers, which use 3G/4G modems as primary or backup WAN links. It exposes cellular-specific data including radio signal quality (RSSI), historical signal statistics over rolling hour and day windows, and general cellular session/interface status. Its monitoring value lies in tracking the health and performance of the cellular WAN connection, particularly signal strength trends that can explain intermittent connectivity or throughput problems on a cellular-backed branch router. It is used alongside standard interface MIBs (such as IF-MIB) since the cellular interface is exposed as a logical interface, and it likely depends on those conventions for interface indexing. It is typically deployed in branch-office or retail routers where a cellular modem provides primary or failover WAN connectivity, monitored centrally by a network operations team. Engineers can download the ONEACCESS-CELLULAR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ONEACCESS-CELLULAR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE router
cellular WAN gateway/router

Monitoring Examples

An admin would poll oacCellRadioRssi for the current signal strength and cross-reference it against oacCellRssiLastHourTable entries (oacCellRssiLastHourMin, oacCellRssiLastHourAvg, oacCellRssiLastHourMax) to see whether signal quality has been degrading over the past hour. Reviewing oacCellRssiLastDayTable similarly (oacCellRssiLastDayMin/Avg/Max across oacCellRssiLastDayHours) helps distinguish a transient dip from a sustained problem, such as a site experiencing persistent weak coverage. A sudden drop in oacCellRadioRssi combined with low daily averages would flag a cellular backup link that may fail during a primary WAN outage.

What Can Be Monitored

current cellular signal strength (RSSI)
hourly min/avg/max RSSI history
daily min/avg/max RSSI history
cellular radio status

Imported Objects

From ONEACCESS-GLOBAL-REG

oacExpIMCellRadio	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacCellularMIBModule	1.3.6.1.4.1.13191.1.100.1000			Add cellular equipment and network info
oacCellRadioRssi	1.3.6.1.4.1.13191.10.3.9.1
oacCellRssiLastHourTable	1.3.6.1.4.1.13191.10.3.9.1.1		not-accessible	RSSI values of the last hour.
oacCellRssiLastHourEntry	1.3.6.1.4.1.13191.10.3.9.1.1.1		not-accessible	An index into the table oacCellRssiLastHour
U32 oacCellRssiLastHourMinutes	1.3.6.1.4.1.13191.10.3.9.1.1.1.1	Unsigned32	read-only	Timestamp (in minutes)
I32 oacCellRssiLastHourMin	1.3.6.1.4.1.13191.10.3.9.1.1.1.2	Integer32	read-only	RSSI Minimum
I32 oacCellRssiLastHourAvg	1.3.6.1.4.1.13191.10.3.9.1.1.1.3	Integer32	read-only	RSSI Average
I32 oacCellRssiLastHourMax	1.3.6.1.4.1.13191.10.3.9.1.1.1.4	Integer32	read-only	RSSI Maximum
oacCellRssiLastDayTable	1.3.6.1.4.1.13191.10.3.9.1.2		not-accessible	RSSI values of the last day.
oacCellRssiLastDayEntry	1.3.6.1.4.1.13191.10.3.9.1.2.1		not-accessible	An index into the table oacCellRssiLastDay
U32 oacCellRssiLastDayHours	1.3.6.1.4.1.13191.10.3.9.1.2.1.1	Unsigned32	read-only	Timestamp (in hours)
I32 oacCellRssiLastDayMin	1.3.6.1.4.1.13191.10.3.9.1.2.1.2	Integer32	read-only	RSSI Minimum
I32 oacCellRssiLastDayAvg	1.3.6.1.4.1.13191.10.3.9.1.2.1.3	Integer32	read-only	RSSI Average
I32 oacCellRssiLastDayMax	1.3.6.1.4.1.13191.10.3.9.1.2.1.4	Integer32	read-only	RSSI Maximum
oacCellRssiLastMonthTable	1.3.6.1.4.1.13191.10.3.9.1.3		not-accessible	RSSI values of the last month.
oacCellRssiLastMonthEntry	1.3.6.1.4.1.13191.10.3.9.1.3.1		not-accessible	An index into the table oacCellRssiLastMonth
U32 oacCellRssiLastMonthDays	1.3.6.1.4.1.13191.10.3.9.1.3.1.1	Unsigned32	read-only	Timestamp (in days)
I32 oacCellRssiLastMonthMin	1.3.6.1.4.1.13191.10.3.9.1.3.1.2	Integer32	read-only	RSSI Minimum
I32 oacCellRssiLastMonthAvg	1.3.6.1.4.1.13191.10.3.9.1.3.1.3	Integer32	read-only	RSSI Average
I32 oacCellRssiLastMonthMax	1.3.6.1.4.1.13191.10.3.9.1.3.1.4	Integer32	read-only	RSSI Maximum
oacCellRadioModuleTable	1.3.6.1.4.1.13191.10.3.9.2		not-accessible	Table of cellular modules.
oacCellRadioModuleEntry	1.3.6.1.4.1.13191.10.3.9.2.1		not-accessible	An index into the table oacCellRadioModule
U32 oacCellModuleIndex	1.3.6.1.4.1.13191.10.3.9.2.1.1	Unsigned32	read-only	Index
STR oacCellManufacturer	1.3.6.1.4.1.13191.10.3.9.2.1.10	DisplayString	read-only	Manufacturer identification
STR oacCellEquipment	1.3.6.1.4.1.13191.10.3.9.2.1.11	DisplayString	read-only	Equipment information
STR oacCellBootRevision	1.3.6.1.4.1.13191.10.3.9.2.1.12	DisplayString	read-only	Boot revision identification
STR oacCellRevision	1.3.6.1.4.1.13191.10.3.9.2.1.13	DisplayString	read-only	Revision identification
STR oacCellIMEI	1.3.6.1.4.1.13191.10.3.9.2.1.14	DisplayString	read-only	Equipment information (IMEI)
STR oacCellMEID	1.3.6.1.4.1.13191.10.3.9.2.1.15	DisplayString	read-only	CDMA Mobile Equipment Id (MEID)
STR oacCellSIMStatus	1.3.6.1.4.1.13191.10.3.9.2.1.20	DisplayString	read-only	SIM card status
STR oacCellIMSI	1.3.6.1.4.1.13191.10.3.9.2.1.21	DisplayString	read-only	SIM International Mobile Subscriber Identity IMSI
STR oacCellICCI	1.3.6.1.4.1.13191.10.3.9.2.1.22	DisplayString	read-only	Integrated Circuit Card ID
STR oacCellPinStatus	1.3.6.1.4.1.13191.10.3.9.2.1.30	DisplayString	read-only	PIN code status
STR oacCellSelectedOperator	1.3.6.1.4.1.13191.10.3.9.2.1.40	DisplayString	read-only	Current selected operator
I32 oacCellSignalStrength	1.3.6.1.4.1.13191.10.3.9.2.1.41	Integer32	read-only	Signal strength (dBm)
I32 oacCellEcIo	1.3.6.1.4.1.13191.10.3.9.2.1.42	Integer32	read-only	Total Ec/Io
I32 oacCellRSRQ	1.3.6.1.4.1.13191.10.3.9.2.1.43	Integer32	read-only	RSRQ (dB)
I32 oacCellRSRP	1.3.6.1.4.1.13191.10.3.9.2.1.44	Integer32	read-only	RSRP (dBm)
I32 oacCellSNR	1.3.6.1.4.1.13191.10.3.9.2.1.45	Integer32	read-only	SNR (dB)
STR oacCellRadioAccessTechnology	1.3.6.1.4.1.13191.10.3.9.2.1.46	DisplayString	read-only	Current radio access technology
STR oacCellCircuitSwitchedState	1.3.6.1.4.1.13191.10.3.9.2.1.47	DisplayString	read-only	Circuit-switched register state
STR oacCellPacketSwitchedState	1.3.6.1.4.1.13191.10.3.9.2.1.48	DisplayString	read-only	Packet-switched attach state
U32 oacCellResetOnLossOfRegistration	1.3.6.1.4.1.13191.10.3.9.2.1.60	Unsigned32	read-only	Reset on loss of GPRS registration
U32 oacCellResetOnFailedRegistration	1.3.6.1.4.1.13191.10.3.9.2.1.61	Unsigned32	read-only	Reset on failed initial registration
U32 oacCellHardwareReset	1.3.6.1.4.1.13191.10.3.9.2.1.62	Unsigned32	read-only	Hardware reset of modem
STR oacCellLAC	1.3.6.1.4.1.13191.10.3.9.2.1.70	DisplayString	read-only	Location Area Code (LAC)
STR oacCellCellID	1.3.6.1.4.1.13191.10.3.9.2.1.71	DisplayString	read-only	Cell ID
STR oacCellTAC	1.3.6.1.4.1.13191.10.3.9.2.1.72	DisplayString	read-only	Tracking Area Code (TAC)
STR oacCellPLMN	1.3.6.1.4.1.13191.10.3.9.2.1.73	DisplayString	read-only	Public Land Mobile Network (PLMN = MCC+MNC)

RFC description

Manages cellular radio equipment and network information including signal strength (RSSI) monitoring.

Start monitoring OneAccess CPE router (cellular 3G/4G WAN interface) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ONEACCESS-CELLULAR-MIB

What Is ONEACCESS-CELLULAR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description