ONEACCESS-SYS-MIB

All MIBs › ONEACCESS-SYS-MIB

Organization: OneAccess

Last Updated: 2014-05-05

Category: CPE/Router

Description: Provides system-level hardware and software inventory, status, and diagnostic objects for OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ONEACCESS-SYS-MIB?

ONEACCESS-SYS-MIB is a OneAccess enterprise MIB providing system-level hardware and software inventory, status, and diagnostic objects for OneAccess customer-premises equipment (CPE) routers. It exposes general categories including hardware identity/manufacturing data, boot/BSP firmware versions, memory utilization, per-core CPU usage on multicore hardware, and crash-log/diagnostic history. This is squarely a device health-monitoring MIB: it lets an operator track memory exhaustion via oacSysMemoryFree/oacSysMemoryTotal, confirm boot and BSP software versions after an upgrade, check what caused the last restart via oacSysStartCaused, and review secure crash-log counts to spot recurring software faults. It is a self-contained enterprise MIB with no strong stated dependency on external standard MIBs beyond general SNMP conventions. It is typically deployed on OneAccess CPE routers used by service providers and enterprises for managed WAN/branch-office connectivity, and administrators can download the ONEACCESS-SYS-MIB file directly to load it into their MIB browser for reference during remote health monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in ONEACCESS-SYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE router (branch-office/WAN access device)
OneAccess routers

Monitoring Examples

An operator would poll oacSysMemoryFree, oacSysMemoryAllocated, and oacSysMemoryTotal to compute memory utilization and detect a leak trending toward exhaustion, and check the CPU usage table added for multicore hardware to spot a core pegged at high load. Checking oacSysStartCaused after an unexpected outage would reveal whether the restart was a crash, watchdog reset, or manual reload, while oacSysSecureCrashlogCount rising over time would flag a recurring software fault worth escalating, and oacSysIMSysMainBSPVersion/oacSysIMSysMainBootVersion confirm what firmware is currently running.

What Can Be Monitored

memory free/allocated/total
per-core CPU usage (multicore)
last restart cause
secure crash-log count
boot/BSP firmware version
hardware manufacturing identity

Imported Objects

From ONEACCESS-GLOBAL-REG

oacExpIMSystem	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacSysMIBModule	1.3.6.1.4.1.13191.1.100.671			Add Cpu usage table for multicore HW
oacExpIMSysStatistics	1.3.6.1.4.1.13191.10.3.3.1
oacSysMemStatistics	1.3.6.1.4.1.13191.10.3.3.1.1
U32 oacSysMemoryFree	1.3.6.1.4.1.13191.10.3.3.1.1.1	Unsigned32	read-only	The number of bytes in free memory
U32 oacSysMemoryAllocated	1.3.6.1.4.1.13191.10.3.3.1.1.2	Unsigned32	read-only	The number of bytes in allocated memory
U32 oacSysMemoryTotal	1.3.6.1.4.1.13191.10.3.3.1.1.3	Unsigned32	read-only	Total number of bytes in the system memory partition
U32 oacSysMemoryUsed	1.3.6.1.4.1.13191.10.3.3.1.1.4	Unsigned32	read-only	Used memory expressed in percent of the total memory size
oacSysCpuStatistics	1.3.6.1.4.1.13191.10.3.3.1.2
U32 oacSysCpuUsed	1.3.6.1.4.1.13191.10.3.3.1.2.1	Unsigned32	read-only	Used cpu in percent
U32 oacSysCpuUsedCoresCount	1.3.6.1.4.1.13191.10.3.3.1.2.2	Unsigned32	read-only	The number of Cores for the equipment
oacSysCpuUsedCoresTable	1.3.6.1.4.1.13191.10.3.3.1.2.3		not-accessible	Table for Oneaccess hardware Cores
oacSysCpuUsedCoresEntry	1.3.6.1.4.1.13191.10.3.3.1.2.3.1		not-accessible	Table entry for a hardware Core
U32 oacSysCpuUsedIndex	1.3.6.1.4.1.13191.10.3.3.1.2.3.1.1	Unsigned32	read-only	Core index
OAS oacSysCpuUsedCoreType	1.3.6.1.4.1.13191.10.3.3.1.2.3.1.2	OASysCoreType	read-only	Type of the core
U32 oacSysCpuUsedValue	1.3.6.1.4.1.13191.10.3.3.1.2.3.1.3	Unsigned32	read-only	Used cpu in percent : equivalent for core 0 to the oacSysCpuUsed object. This is the current value
U32 oacSysCpuUsedOneMinuteValue	1.3.6.1.4.1.13191.10.3.3.1.2.3.1.4	Unsigned32	read-only	Cpu load for the last minute period
STR oacSysLastRebootCause	1.3.6.1.4.1.13191.10.3.3.1.3	DisplayString	read-only	To display the cause for the last reboot.
INT oacSysSecureCrashlogCount	1.3.6.1.4.1.13191.10.3.3.1.100	INTEGER	read-only	The number of avaiable crash logs
STR oacSysStartCaused	1.3.6.1.4.1.13191.10.3.3.1.200	DisplayString	read-only	Cause of system start
oacExpIMSysHardwareDescription	1.3.6.1.4.1.13191.10.3.3.2
oacSysIMSysMainBoard	1.3.6.1.4.1.13191.10.3.3.2.1
OID oacSysIMSysMainIdentifier	1.3.6.1.4.1.13191.10.3.3.2.1.1	OBJECT IDENTIFIER	read-only	The vendor's authoritative identification of the main board. This value is allocated within the SMI enterprise subtree
STR oacSysIMSysMainManufacturedIdentity	1.3.6.1.4.1.13191.10.3.3.2.1.2	DisplayString	read-only	Unique ID string self to each equipment. By default, it is retrieved from the manufacturer of the equipment. Can also be configure by CLI ( see command 'snmp chassis-id') for customer purposes
STR oacSysIMSysMainManufacturedDate	1.3.6.1.4.1.13191.10.3.3.2.1.3	DisplayString	read-only	the date of the manufacturing of the equipment
STR oacSysIMSysMainCPU	1.3.6.1.4.1.13191.10.3.3.2.1.4	DisplayString	read-only	Description of the main CPU used on the main board
STR oacSysIMSysMainBSPVersion	1.3.6.1.4.1.13191.10.3.3.2.1.5	DisplayString	read-only	the current BSP version supported on the equipment
STR oacSysIMSysMainBootVersion	1.3.6.1.4.1.13191.10.3.3.2.1.6	DisplayString	read-only	the current boot version supported on the equipment
STR oacSysIMSysMainBootDateCreation	1.3.6.1.4.1.13191.10.3.3.2.1.7	DisplayString	read-only	the date the current boot version has been generated
oacExpIMSysHwComponents	1.3.6.1.4.1.13191.10.3.3.2.2
U32 oacExpIMSysHwComponentsCount	1.3.6.1.4.1.13191.10.3.3.2.2.1	Unsigned32	read-only	The number of components for the equipment
oacExpIMSysHwComponentsTable	1.3.6.1.4.1.13191.10.3.3.2.2.2		not-accessible	Table for Oneaccess hardware components
oacExpIMSysHwComponentsEntry	1.3.6.1.4.1.13191.10.3.3.2.2.2.1		not-accessible	Table entry for a hardware component
U32 oacExpIMSysHwcIndex	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.1	Unsigned32	read-only	Component index
OAS oacExpIMSysHwcClass	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.2	OASysHwcClass	read-only	Class of the component
OAS oacExpIMSysHwcType	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.3	OASysHwcType	read-only	Type of the component
STR oacExpIMSysHwcDescription	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.4	DisplayString	read-only	Component description, identifies the component
STR oacExpIMSysHwcSerialNumber	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.5	DisplayString	read-only	Component's serial number
STR oacExpIMSysHwcManufacturer	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.6	DisplayString	read-only	Component manufacturer
STR oacExpIMSysHwcManufacturedDate	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.7	DisplayString	read-only	Component's manufacturing date
STR oacExpIMSysHwcProductName	1.3.6.1.4.1.13191.10.3.3.2.2.2.1.8	DisplayString	read-only	The Product name
oacExpIMSysFactory	1.3.6.1.4.1.13191.10.3.3.2.3
STR oacExpIMSysFactorySupplierID	1.3.6.1.4.1.13191.10.3.3.2.3.1	DisplayString	read-only	Supplier ID. Mapped to Mid field of product-info-area. String is empty if Mid field is not included in product-info-area.
STR oacExpIMSysFactoryProductSalesCode	1.3.6.1.4.1.13191.10.3.3.2.3.2	DisplayString	read-only	OA Product Sales Code. Mapped to Mcode field of product-info-area. String is empty if Mcode field is not included in product-info-area.
STR oacExpIMSysFactoryHwRevision	1.3.6.1.4.1.13191.10.3.3.2.3.3	DisplayString	read-only	Hardware Revision. Mapped to Mrevision field of product-info-area. String is empty if Mrevision field is not included in product-info-area.

RFC description

OneAccess Networks system management MIB for network access and gateway device monitoring.

Start monitoring OneAccess routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ONEACCESS-SYS-MIB

What Is ONEACCESS-SYS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description