OG-STATUS-MIB

All MIBs › OG-STATUS-MIB

Organization: Opengear Inc.

Last Updated: 2013-08-16

Category: Out-of-Band Management

Description: Reports overall system health, interface link state, and subsystem status for Opengear management appliances.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OG-STATUS-MIB?

OG-STATUS-MIB is a legacy Opengear MIB for their console/remote-management appliances, reporting overall system health, interface link state, and subsystem status. Its centerpiece is a serial-port status table that exposes per-port hardware signal and traffic data for the device's serial console ports. For hardware status monitoring, it reports live modem-control signal lines (DCD, DTR, DSR, CTS, RTS) plus port speed and byte counters (RxBytes/TxBytes), which together reveal whether a connected serial device/console session is actually established and passing data. As a "legacy" status/alert MIB it is described as an older module superseded by newer Opengear MIBs, and has no explicit noted dependency on other standard MIBs beyond the standard SNMPv2-CONF conformance framework objects (ogStatusConformance/ogStatusCompliances/ogStatusGroups). It is deployed on Opengear console servers and remote-access/out-of-band management appliances used to provide serial console access to other network and server equipment. Engineers can download the OG-STATUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OG-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Opengear console servers and out-of-band management appliances

Monitoring Examples

An administrator would poll ogSerialPortStatusTable/ogSerialPortStatusEntry indexed by ogSerialPortStatusIndex/ogSerialPortStatusPort to check each console port's ogSerialPortStatusSpeed and hardware handshake lines. Seeing ogSerialPortStatusDCD or ogSerialPortStatusDSR drop to a down state would reveal that a connected device has lost its serial link, while stagnant ogSerialPortStatusRxBytes/ogSerialPortStatusTxBytes counters indicate no console traffic is flowing even though the port shows as physically connected.

What Can Be Monitored

serial port RX/TX byte counters
serial port speed
DCD/DTR/DSR/CTS/RTS signal states
per-port operational status

Imported Objects

From OG-SMI-MIB

opengear

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using ogSerialPortStatusRxBytes OID:

Select an Opengear console servers/out-of-band management appliance (legacy status/alert MIB) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ogSerialPortStatusRxBytes into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the serial port bytes received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ogStatus	1.3.6.1.4.1.25049.16			Legacy Opengear status and alert MIB
ogSerialPortStatusTable	1.3.6.1.4.1.25049.16.1		not-accessible	This entity's serial port statistics table.
ogSerialPortStatusEntry	1.3.6.1.4.1.25049.16.1.1		not-accessible	A console serial port entry
I32 ogSerialPortStatusIndex	1.3.6.1.4.1.25049.16.1.1.1	Integer32	not-accessible	Index within the serial port table of this status
I32 ogSerialPortStatusPort	1.3.6.1.4.1.25049.16.1.1.2	Integer32	read-only	Serial port number
C64 ogSerialPortStatusRxBytesEx	1.3.6.1.4.1.25049.16.1.1.3	Counter64	read-only	Serial port bytes received
C64 ogSerialPortStatusTxBytes	1.3.6.1.4.1.25049.16.1.1.4	Counter64	read-only	Serial port bytes transmitted
I32 ogSerialPortStatusSpeed	1.3.6.1.4.1.25049.16.1.1.5	Integer32	read-only	Serial port speed in bits per second
INT ogSerialPortStatusDCD	1.3.6.1.4.1.25049.16.1.1.6	INTEGER	read-only	The status of the DCD signal.
INT ogSerialPortStatusDTR	1.3.6.1.4.1.25049.16.1.1.7	INTEGER	read-only	The status of the DTR signal.
INT ogSerialPortStatusDSR	1.3.6.1.4.1.25049.16.1.1.8	INTEGER	read-only	The status of the DSR signal.
INT ogSerialPortStatusCTS	1.3.6.1.4.1.25049.16.1.1.9	INTEGER	read-only	The status of the CTS signal.
INT ogSerialPortStatusRTS	1.3.6.1.4.1.25049.16.1.1.10	INTEGER	read-only	The status of the RTS signal.
STR ogSerialPortStatusLabel	1.3.6.1.4.1.25049.16.1.1.11	DisplayString	read-only	The label of the port
ogSerialPortActiveUsersTable	1.3.6.1.4.1.25049.16.2		not-accessible	This entity's serial port users table.
ogSerialPortActiveUsersEntry	1.3.6.1.4.1.25049.16.2.1		not-accessible	A user logged in on the serial port
I32 ogSerialPortActiveUsersIndex	1.3.6.1.4.1.25049.16.2.1.1	Integer32	not-accessible	Index within the serial port active users table
I32 ogSerialPortActiveUsersPort	1.3.6.1.4.1.25049.16.2.1.2	Integer32	read-only	Serial port number
STR ogSerialPortActiveUsersName	1.3.6.1.4.1.25049.16.2.1.3	DisplayString	read-only	The name of the user logged in on the port.
STR ogSerialPortActiveUsersPortLabel	1.3.6.1.4.1.25049.16.2.1.4	DisplayString	read-only	The label of the port being accessed
ogRpcStatusTable	1.3.6.1.4.1.25049.16.3		not-accessible	This entity's RPC table.
ogRpcStatusEntry	1.3.6.1.4.1.25049.16.3.1		not-accessible	RPC status entry
I32 ogRpcStatusIndex	1.3.6.1.4.1.25049.16.3.1.1	Integer32	not-accessible	Index within the RPC status table
STR ogRpcStatusName	1.3.6.1.4.1.25049.16.3.1.2	DisplayString	read-only	The name of the RPC device.
I32 ogRpcStatusMaxTemp	1.3.6.1.4.1.25049.16.3.1.3	Integer32	read-only	Maximum temperature on the RPC
I32 ogRpcStatusAlertCount	1.3.6.1.4.1.25049.16.3.1.4	Integer32	read-only	Number of alerts triggered on the RPC
ogEmdStatusTable	1.3.6.1.4.1.25049.16.4		not-accessible	This entity's EMD table.
ogEmdStatusEntry	1.3.6.1.4.1.25049.16.4.1		not-accessible	EMD status entry
I32 ogEmdStatusIndex	1.3.6.1.4.1.25049.16.4.1.1	Integer32	not-accessible	Index within the EMD status table
STR ogEmdStatusName	1.3.6.1.4.1.25049.16.4.1.2	DisplayString	read-only	The name of the EMD device.
I32 ogEmdStatusTemp	1.3.6.1.4.1.25049.16.4.1.3	Integer32	read-only	Current temperature on the EMD
I32 ogEmdStatusHumidity	1.3.6.1.4.1.25049.16.4.1.4	Integer32	read-only	Humidity sensor on the EMD
I32 ogEmdStatusAlertCount	1.3.6.1.4.1.25049.16.4.1.5	Integer32	read-only	Number of alerts triggered on the EMD
ogDioStatusTable	1.3.6.1.4.1.25049.16.5		not-accessible	Ths Digital I/O status table.
ogDioStatusEntry	1.3.6.1.4.1.25049.16.5.1		not-accessible	Digital I/O status entry
I32 ogDioStatusIndex	1.3.6.1.4.1.25049.16.5.1.1	Integer32	not-accessible	Index within the Digital I/O status table
STR ogDioStatusName	1.3.6.1.4.1.25049.16.5.1.2	DisplayString	read-only	The ID of this Digital I/O.
INT ogDioStatusType	1.3.6.1.4.1.25049.16.5.1.3	INTEGER	read-only	Digital I/O type (TTL Input/Output or High-Voltage Output).
INT ogDioStatusDirection	1.3.6.1.4.1.25049.16.5.1.4	INTEGER	read-only	The direction of the Digital I/O (Input or Output)
INT ogDioStatusState	1.3.6.1.4.1.25049.16.5.1.5	INTEGER	read-only	The electrical state value of the Digital I/O (Low or High)
C64 ogDioStatusCounter	1.3.6.1.4.1.25049.16.5.1.6	Counter64	read-only	The trigger counter of this Digital I/O
INT ogDioStatusTriggerMode	1.3.6.1.4.1.25049.16.5.1.7	INTEGER	read-only	The Trigger Mode of the Digital I/O
ogSignalAlertStatusTable	1.3.6.1.4.1.25049.16.6		not-accessible	This entity's serial port signal table.
ogSignalAlertStatusEntry	1.3.6.1.4.1.25049.16.6.1		not-accessible	A console signal entry
I32 ogSignalAlertStatusIndex	1.3.6.1.4.1.25049.16.6.1.1	Integer32	not-accessible	Index within the signal table of this alert
I32 ogSignalAlertStatusPort	1.3.6.1.4.1.25049.16.6.1.2	Integer32	read-only	Serial port number on which the signal change occurred
STR ogSignalAlertStatusLabel	1.3.6.1.4.1.25049.16.6.1.3	DisplayString	read-only	The label for the serial port where the signal applies.
STR ogSignalAlertStatusSignalName	1.3.6.1.4.1.25049.16.6.1.4	DisplayString	read-only	The particular signal which changed
INT ogSignalAlertStatusState	1.3.6.1.4.1.25049.16.6.1.5	INTEGER	read-only	The current signal state
ogEnvAlertStatusTable	1.3.6.1.4.1.25049.16.7		not-accessible	This entity's serial port signal table.
ogEnvAlertStatusEntry	1.3.6.1.4.1.25049.16.7.1		not-accessible	A console environment entry
I32 ogEnvAlertStatusIndex	1.3.6.1.4.1.25049.16.7.1.1	Integer32	not-accessible	Index of the environment alert status
STR ogEnvAlertStatusDevice	1.3.6.1.4.1.25049.16.7.1.2	DisplayString	read-only	The device the environment alert occurred on.
STR ogEnvAlertStatusSensor	1.3.6.1.4.1.25049.16.7.1.3	DisplayString	read-only	The sensor the environment alert occurred on.
I32 ogEnvAlertStatusOutlet	1.3.6.1.4.1.25049.16.7.1.4	Integer32	read-only	Outlet of the environment status
I32 ogEnvAlertStatusValue	1.3.6.1.4.1.25049.16.7.1.5	Integer32	read-only	Value of the environment status
I32 ogEnvAlertStatusOldValue	1.3.6.1.4.1.25049.16.7.1.6	Integer32	read-only	Previous value of the environment status
I32 ogEnvAlertStatusStatus	1.3.6.1.4.1.25049.16.7.1.7	Integer32	read-only	status value of the environment status
ogNutAlertStatusTable	1.3.6.1.4.1.25049.16.8		not-accessible	This entity's NUT (UPS) alert table.
ogNutAlertStatusEntry	1.3.6.1.4.1.25049.16.8.1		not-accessible	A NUT (UPS) entry
I32 ogNutAlertStatusIndex	1.3.6.1.4.1.25049.16.8.1.1	Integer32	not-accessible	Index of the NUT (UPS) alert status
I32 ogNutAlertStatusPort	1.3.6.1.4.1.25049.16.8.1.2	Integer32	read-only	Serial port of the NUT (UPS) alert
STR ogNutAlertStatusName	1.3.6.1.4.1.25049.16.8.1.3	DisplayString	read-only	The name of the NUT (UPS) alert.
STR ogNutAlertStatusHost	1.3.6.1.4.1.25049.16.8.1.4	DisplayString	read-only	The host of the NUT (UPS) alert.
STR ogNutAlertStatusStatus	1.3.6.1.4.1.25049.16.8.1.5	DisplayString	read-only	The status of the NUT (UPS) alert.
ogDataAlertStatusTable	1.3.6.1.4.1.25049.16.9		not-accessible	A Data Usage alert table.
ogDataAlertStatusEntry	1.3.6.1.4.1.25049.16.9.1		not-accessible	A Data Usage entry
I32 ogDataAlertStatusIndex	1.3.6.1.4.1.25049.16.9.1.1	Integer32	not-accessible	Index of the data usage alert
I32 ogDataAlertStatusBytes	1.3.6.1.4.1.25049.16.9.1.2	Integer32	read-only	The number of bytes exceeded during the time period
I32 ogDataAlertStatusSeconds	1.3.6.1.4.1.25049.16.9.1.3	Integer32	read-only	The time in seconds over which the number of bytes was exceeded
STR ogDataAlertStatusDevice	1.3.6.1.4.1.25049.16.9.1.4	DisplayString	read-only	The unique name for the interface the alert occurred on.
INT ogDataAlertStatusState	1.3.6.1.4.1.25049.16.9.1.5	INTEGER	read-only	The status of the data alert.
ogDioAlertStatusTable	1.3.6.1.4.1.25049.16.10		not-accessible	Ths Digital I/O current alert table.
ogDioAlertStatusEntry	1.3.6.1.4.1.25049.16.10.1		not-accessible	A Digital I/O current alert entry
I32 ogDioAlertStatusIndex	1.3.6.1.4.1.25049.16.10.1.1	Integer32	not-accessible	Index within the Digital I/O Input alert table
STR ogDioAlertStatusName	1.3.6.1.4.1.25049.16.10.1.2	DisplayString	read-only	The Digital I/O Input which the alert occurred on.
INT ogDioAlertStatusValue	1.3.6.1.4.1.25049.16.10.1.3	INTEGER	read-only	Current value of the Digital I/O Input (Open or Closed)
INT ogDioAlertStatusOldValue	1.3.6.1.4.1.25049.16.10.1.4	INTEGER	read-only	Previous value of the Digital I/O Input (Open or Closed)
INT ogDioAlertStatusTriggered	1.3.6.1.4.1.25049.16.10.1.5	INTEGER	read-only	Trigger status value of the Digital I/O
ogStatusConformance	1.3.6.1.4.1.25049.16.65535
ogStatusCompliances	1.3.6.1.4.1.25049.16.65535.1
ogStatusCompliance	1.3.6.1.4.1.25049.16.65535.1.1			The compliance statement for the Opengear status MIB.
ogStatusGroups	1.3.6.1.4.1.25049.16.65535.2
ogBasicStatusGroup	1.3.6.1.4.1.25049.16.65535.2.1			A collection of objects to retrieve Opengear statistics.
ogBasicAlertStatusGroup	1.3.6.1.4.1.25049.16.65535.2.2			A collection of objects to retrieve Opengear alert status.

RFC description

Monitors serial port statistics, UPS outlets, and digital I/O status on Opengear console servers.

Start monitoring Opengear console servers/out-of-band management appliances (legacy status/alert MIB) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OG-STATUS-MIB