OA-SFP-MIB

All MIBs › OA-SFP-MIB

Organization: MRV Communications

Last Updated: 2005-05-26

Category: Optical Transport

Description: Monitors SFP transceiver optical power, temperature, and digital diagnostics on MRV Communications optical equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OA-SFP-MIB?

OA-SFP-MIB is a vendor-specific MIB from MRV Communications' Optical Access (OA) platform for monitoring pluggable SFP transceiver modules based on the SFP Multi-Source Agreement. It exposes per-slot and per-port transceiver inventory and digital diagnostic data, including transceiver type, vendor identification, connector type, and interface variant (10GigE, InfiniBand, ESCON). This MIB is centrally about monitoring optical hardware status, covering things like transceiver presence, compatibility, and (per the SFP MSA digital diagnostics standard it is based on) optical power and temperature readings for each installed module. It is explicitly built on the SFP MSA specification, giving it a clear dependency on that industry standard alongside MRV's own management framework (oaManagement, oaAlarmNotifications). It is deployed on MRV optical access and transport equipment where administrators need visibility into the health of individual pluggable optics across chassis slots and ports. Network engineers evaluating or troubleshooting this functionality can download the OA-SFP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OA-SFP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MRV Communications optical access equipment
optical transport chassis

Monitoring Examples

An administrator would poll oaSfpInfoTable entries, indexed by oaSfpInfoSlotIndex and oaSfpInfoPortIndex, to check oaSfpInfoIdentifier and oaSfpInfoVendorSpecificIdentifier for each installed transceiver, verifying it matches the expected transceiver type such as oaSfpInfoTransceiver10GigaEth. A mismatch or unexpected oaSfpInfoConnector value could reveal an incompatible or failing optic before it causes a link outage, and oaAlarmNotifications would fire if an SFP degrades further.

What Can Be Monitored

SFP transceiver identity
transceiver connector type
10GigE/InfiniBand/ESCON compatibility
slot and port SFP inventory
SFP alarm notifications

Imported Objects

From OA-TRAP-MESSAGES-MIB

oaDevTrapsPortsIfAlias

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
oaccess	1.3.6.1.4.1.6926
oaManagement	1.3.6.1.4.1.6926.1
oaSfpMib	1.3.6.1.4.1.6926.1.18			This MIB defines objects of pluggable modules (such as SFP modules). The MIB objects defined in this MIB are based on the Small Form Factor Pluggable (SFP) Transceiver MultiSource Agreement(MSA).
oaAlarmNotifications	1.3.6.1.4.1.6926.1.18.0
NTF msaPortRxLossAlarmOn	1.3.6.1.4.1.6926.1.18.0.68			The SNMP trap that is generated when MSA Port Rx Loss Average Optical Power Alarm has been raised.
NTF msaPortRxLossAlarmOff	1.3.6.1.4.1.6926.1.18.0.69			The SNMP trap that is generated when MSA Port Rx Loss Average Optical Power Alarm has been lowered.
NTF msaPortTxLaserWlAlarmOn	1.3.6.1.4.1.6926.1.18.0.70			The SNMP trap that is generated when MSA Port WDM Tx Laser Wavelength Alarm has been raised.
NTF msaPorTxLaserWltAlarmOff	1.3.6.1.4.1.6926.1.18.0.71			The SNMP trap that is generated when MSA Port WDM Tx Laser Wavelength Alarm has been lowered.
NTF msaPortTxModulatorTempAlarmOn	1.3.6.1.4.1.6926.1.18.0.72			The SNMP trap that is generated when MSA Port WDM Tx Modulator Temperature Alarm has been raised.
NTF msaPortTxModulatorTempAlarmOff	1.3.6.1.4.1.6926.1.18.0.73			The SNMP trap that is generated when MSA Port WDM Tx Modulator Temperature Alarm has been lowered.
NTF msaPortTxLaserPowerAlarmOn	1.3.6.1.4.1.6926.1.18.0.74			The SNMP trap that is generated when MSA Port WDM Tx Laser Power Alarm has been raised.
NTF msaPortTxLaserPowerAlarmOff	1.3.6.1.4.1.6926.1.18.0.75			The SNMP trap that is generated when MSA Port WDM Tx Laser Power Alarm has been lowered.
NTF msaPortTxPllLockAlarmOn	1.3.6.1.4.1.6926.1.18.0.76			The SNMP trap that is generated when MSA Port WDM Tx PLL Lock Alarm has been raised.
NTF msaPortTxPllLockAlarmOff	1.3.6.1.4.1.6926.1.18.0.77			The SNMP trap that is generated when MSA Port WDM Tx PLL Lock Alarm has been lowered.
NTF msaPortTxLaserTempAlarmOn	1.3.6.1.4.1.6926.1.18.0.78			The SNMP trap that is generated when MSA Port WDM Tx Laser Temperature Alarm has been raised.
NTF msaPortTxLaserTempAlarmOff	1.3.6.1.4.1.6926.1.18.0.79			The SNMP trap that is generated when MSA Port WDM Tx Laser Temperature Alarm has been lowered.
NTF pluggableConnectorInserted	1.3.6.1.4.1.6926.1.18.0.80			The SNMP trap that is generated when a pluggable connector/device is inserted into the specified slot and port.
NTF pluggableConnectorRemoved	1.3.6.1.4.1.6926.1.18.0.81			The SNMP trap that is generated when a pluggable connector/device is removed from the specified slot and port.
NTF sfpXfpPortTempHighAlarmOn	1.3.6.1.4.1.6926.1.18.0.82			The SNMP trap that is generated when a SFP/XFP port's internal temperature exceeds high alarm level.
NTF sfpXfpPortTempHighAlarmOff	1.3.6.1.4.1.6926.1.18.0.83			The SNMP trap that is generated when a SFP/XFP port's internal temperature returns below high alarm level.
NTF sfpXfpPortTempLowAlarmOn	1.3.6.1.4.1.6926.1.18.0.84			The SNMP trap that is generated when a SFP/XFP port's internal temperature is below low alarm level.
NTF sfpXfpPortTempLowAlarmOff	1.3.6.1.4.1.6926.1.18.0.85			The SNMP trap that is generated when a SFP/XFP port's internal temperature returns up low alarm level.
NTF sfpXfpPortTxPowerHighAlarmOn	1.3.6.1.4.1.6926.1.18.0.86			The SNMP trap that is generated when a SFP/XFP port's TX output power exceeds high alarm level.
NTF sfpXfpPortTxPowerHighAlarmOff	1.3.6.1.4.1.6926.1.18.0.87			The SNMP trap that is generated when a SFP/XFP port's TX output power returns below high alarm level.
NTF sfpXfpPortTxPowerLowAlarmOn	1.3.6.1.4.1.6926.1.18.0.88			The SNMP trap that is generated when a SFP/XFP port's TX output power is below low alarm level.
NTF sfpXfpPortTxPowerLowAlarmOff	1.3.6.1.4.1.6926.1.18.0.89			The SNMP trap that is generated when a SFP/XFP port's TX output power returns up low alarm level.
NTF sfpXfpPortRxPowerHighAlarmOn	1.3.6.1.4.1.6926.1.18.0.90			The SNMP trap that is generated when a SFP/XFP port's Received power exceeds high alarm level.
NTF sfpXfpPortRxPowerHighAlarmOff	1.3.6.1.4.1.6926.1.18.0.91			The SNMP trap that is generated when a SFP/XFP port's Received power returns below high alarm level.
NTF sfpXfpPortRxPowerLowAlarmOn	1.3.6.1.4.1.6926.1.18.0.92			The SNMP trap that is generated when a SFP/XFP port's Received power is below low alarm level.
NTF sfpXfpPortRxPowerLowAlarmOff	1.3.6.1.4.1.6926.1.18.0.93			The SNMP trap that is generated when a SFP/XFP port's Received power returns up low alarm level.
oaSfp	1.3.6.1.4.1.6926.1.18.1
oaSfpMIBObjects	1.3.6.1.4.1.6926.1.18.1.1
I32 oaSfpCompatibleInterfaceCount	1.3.6.1.4.1.6926.1.18.1.1.1	Integer32	read-only	The number of ports in the system which are sfp compatible
oaSfpInfoTable	1.3.6.1.4.1.6926.1.18.1.1.2		not-accessible	The sfp information table.
oaSfpInfoEntry	1.3.6.1.4.1.6926.1.18.1.1.2.1		not-accessible	An entry in the SFP Information Table
I32 oaSfpInfoSlotIndex	1.3.6.1.4.1.6926.1.18.1.1.2.1.1	Integer32	accessible-for-notify	The SFP slot number
I32 oaSfpInfoPortIndex	1.3.6.1.4.1.6926.1.18.1.1.2.1.2	Integer32	accessible-for-notify	The SFP port number
INT oaSfpInfoIdentifier	1.3.6.1.4.1.6926.1.18.1.1.2.1.3	INTEGER	read-only	The type of serial transceiver unknown - Unknown or unspecified other - Vendor specific gbic - GBIC fixed - Module/connector soldered to motherboard sfp - SFP transceiver xbi300pin - 300 pin XBI xenpak - XENPAK transceiver xfp - XFP transceiver xff - XFF transceiver xfpE - XFP-E transceiver xpak - XPAK transceiver x2 - X2 transceiver dsfp - DWDM SFP transceiver
STR oaSfpInfoVendorSpecificIdentifier	1.3.6.1.4.1.6926.1.18.1.1.2.1.4	DisplayString	read-only	The vendor specific identifier. This Object will be set to value other than null only if oaSfpInfoIdentifier returns a value of other
INT oaSfpInfoConnector	1.3.6.1.4.1.6926.1.18.1.1.2.1.8	INTEGER	read-only	The type of external connector provided unknown - Unknown or unspecified other - Vendor specific sc - SC fcs1cc - Fibre Channel Style 1 copper connector fcs2cc - Fibre Channel Style 2 copper connector bnctnc - BNC/TNC fcch - Fibre Channel coaxial headers fiberJack - Fiber Jack lc --LC mtrj - MT-RJ mu - MU sg - SG opticalPigtail - Optical Pigtail hssdcii - HSSDC II copperPigtail - Copper Pigtail
STR oaSfpInfoVendorSpecificConnector	1.3.6.1.4.1.6926.1.18.1.1.2.1.9	DisplayString	read-only	The type of vendor specific Connector. This Object will be set to value other than null only if oaSfpInfoConnector returns a value of other
STR oaSfpInfoTransceiver10GigaEth	1.3.6.1.4.1.6926.1.18.1.1.2.1.18	DisplayString	read-only	The 10 Giga Ethernet type of optic transceiver compliance code.
STR oaSfpInfoTransceiverInfiniband	1.3.6.1.4.1.6926.1.18.1.1.2.1.19	DisplayString	read-only	The Infiniband type of optic transceiver compliance code.
STR oaSfpInfoTransceiverEscon	1.3.6.1.4.1.6926.1.18.1.1.2.1.20	DisplayString	read-only	The ESCON type of optic transceiver compliance code.
STR oaSfpInfoTransceiverSonet	1.3.6.1.4.1.6926.1.18.1.1.2.1.21	DisplayString	read-only	The SONET type of optic transceiver compliance code.
STR oaSfpInfoTransceiverEthernet	1.3.6.1.4.1.6926.1.18.1.1.2.1.22	DisplayString	read-only	The Ethernet type of optic transceiver compliance code.
STR oaSfpInfoTransceiverFibreChannel	1.3.6.1.4.1.6926.1.18.1.1.2.1.23	DisplayString	read-only	The Fibre Channel type of optic transceiver compliance code.
STR oaSfpInfoVendorName	1.3.6.1.4.1.6926.1.18.1.1.2.1.24	DisplayString	read-only	The sfp vendor name which is the full name of the corporation, a commonly accepted abbreviation of the name of the corporation, the SCSI company code for the corporation, or the stock exchange code for the corporation.
STR oaSfpInfoVendorOUI	1.3.6.1.4.1.6926.1.18.1.1.2.1.25	DisplayString	read-only	The sfp vendor organizationally unique identifier field (vendor OUI) that contains the IEEE company identifier for the vendor. A value of all zero in the 3 octet field indicates that the vendor OUI is unspecified
STR oaSfpInfoVendorPN	1.3.6.1.4.1.6926.1.18.1.1.2.1.26	DisplayString	read-only	The sfp vendor part number (Vendor PN) or product name if the Vendor PN is unspecified, the null string will be returned
STR oaSfpInfoVendorRev	1.3.6.1.4.1.6926.1.18.1.1.2.1.27	DisplayString	read-only	The transceiver vendor's product revision number (Vendor Rev) if the Vendor Rev is unspecified, the null string will be returned
I32 oaSfpInfoLaserWavelength	1.3.6.1.4.1.6926.1.18.1.1.2.1.28	Integer32	read-only	Nominal Transmitter output wavelength at room temperature. Units: 0.01 Nano Meter(nm)
INT oaSfpTunability	1.3.6.1.4.1.6926.1.18.1.1.2.1.29	INTEGER	read-only	The tunability of SFP/XFP transceiver. unknown - Unknown about tunability feature; tunable - Wavelength tunability feature is implemented; nonTunable - Wavelength tunability feature is not implemented.
STR oaSfpInfoVendorSN	1.3.6.1.4.1.6926.1.18.1.1.2.1.32	DisplayString	read-only	The Sfp vendor serial number (Vendor SN) if the Vendor SN is unspecified, the null string will be returned
STR oaSfpInfoVendorDate	1.3.6.1.4.1.6926.1.18.1.1.2.1.33	DisplayString	read-only	The Vendor's date. Formated: YY MM DD
STR oaSfpInfoVendorSpecificLotCode	1.3.6.1.4.1.6926.1.18.1.1.2.1.34	DisplayString	read-only	The Vendor Specific Lot code. A null value indicates that the lot code is unspecified.
OCT oaSfpInfoVendorSpecificData	1.3.6.1.4.1.6926.1.18.1.1.2.1.35	OCTET STRING	read-only	Vendor Specific Information which can be read from the SFP transceiver (Reference: SFF-8472, revision 9.3 - Registers 96-127 )
INT oaSfpInfoDiagnosticPowerType	1.3.6.1.4.1.6926.1.18.1.1.2.1.36	INTEGER	read-only	The diagnostic monitoring receive power type in the SFP transceiver. unknown - Unknown avarage - Received power measurement type is avarage oma - Received power measurement type is OMA
INT oaSfpInfoDigitalDiagnostic	1.3.6.1.4.1.6926.1.18.1.1.2.1.37	INTEGER	read-only	The diagnostic monitoring implemented in the SFP transceiver. unknown - Unknown digitalDiagMonitoring - Digital diagnostic monitoring implemented. noDigitalDiagMonitoring - Digital diagnostic monitoring not implemented.
INT oaSfpInfoDiagnosticCalibration	1.3.6.1.4.1.6926.1.18.1.1.2.1.38	INTEGER	read-only	The diagnostic calibration in the SFP transceiver. unknown - Unknown ExternalCalibration - External Calibration InternalCalibration - Internal Calibration
INT oaSfpInfoInstalledStatus	1.3.6.1.4.1.6926.1.18.1.1.2.1.40	INTEGER	read-only	The current installed state of the sfp transceiver unknown - Unknown notInstalled - the SFP transceiver is not installed installed - the sfp transceiver is installed
INT oaSfpInfofaultStatus	1.3.6.1.4.1.6926.1.18.1.1.2.1.41	INTEGER	read-only	The current fault state of the sfp transceiver unknown - Unknown fault - the sfp transceiver is faulty operational - the sfp transceiver is working properly
INT oaSfpInfoEnableStatus	1.3.6.1.4.1.6926.1.18.1.1.2.1.42	INTEGER	read-only	The current enable state of the sfp transceiver unknown - Unknown enabled - the sfp transceiver has been enabled disabled - the sfp transceiver has been diabled
oaSfpDiagnosticTable	1.3.6.1.4.1.6926.1.18.1.1.3		not-accessible	The sfp real time diagnostic table.
oaSfpDiagnosticEntry	1.3.6.1.4.1.6926.1.18.1.1.3.1		not-accessible	An entry in the SFP Real Time Diagnostic Table
I32 oaSfpDiagnosticSlotIndex	1.3.6.1.4.1.6926.1.18.1.1.3.1.1	Integer32	not-accessible	The SFP slot number
I32 oaSfpDiagnosticPortIndex	1.3.6.1.4.1.6926.1.18.1.1.3.1.2	Integer32	not-accessible	The SFP port number
I32 oaSfpDiagnosticTemperature	1.3.6.1.4.1.6926.1.18.1.1.3.1.3	Integer32	read-only	Internaly measured module temperature. Units: 1/10 degrees Celsius (C)
I32 oaSfpDiagnosticVcc	1.3.6.1.4.1.6926.1.18.1.1.3.1.4	Integer32	read-only	Internaly measured supply voltage in transceiver. Units: 100 micro Volts (V)
I32 oaSfpDiagnosticTxBias	1.3.6.1.4.1.6926.1.18.1.1.3.1.5	Integer32	read-only	Internaly measured Tx Bias current. Units: 1 micro Amperes (A)
I32 oaSfpDiagnosticTxPower	1.3.6.1.4.1.6926.1.18.1.1.3.1.6	Integer32	read-only	Internaly measured Tx output power. Units: 0.01 decibel (dBm)
I32 oaSfpDiagnosticRxPower	1.3.6.1.4.1.6926.1.18.1.1.3.1.7	Integer32	read-only	Internaly measured Rx input power. Units: 0.01 decibel (dBm)
oaXfpMIBObjects	1.3.6.1.4.1.6926.1.18.1.2
I32 oaXfpCompatibleInterfaceCount	1.3.6.1.4.1.6926.1.18.1.2.1	Integer32	read-only	The number of ports in the system which are xfp compatible
oaXfpInfoTable	1.3.6.1.4.1.6926.1.18.1.2.2		not-accessible	The XFP information table.
oaXfpInfoEntry	1.3.6.1.4.1.6926.1.18.1.2.2.1		not-accessible	An entry in the XFP Information Table
I32 oaXfpInfoSlotIndex	1.3.6.1.4.1.6926.1.18.1.2.2.1.1	Integer32	not-accessible	The XFP slot number
I32 oaXfpInfoPortIndex	1.3.6.1.4.1.6926.1.18.1.2.2.1.2	Integer32	not-accessible	The XFP port number
I32 oaXfpInfoLaserWavelengthTolerance	1.3.6.1.4.1.6926.1.18.1.2.2.1.28	Integer32	read-only	Guaranteed +/- range of transmitter output wavelength under all normal operating conditions. Units: 0.001 Nano Meter(nm)
oaXfpTunTable	1.3.6.1.4.1.6926.1.18.1.2.3		not-accessible	The XFP Tunability Parameters table.
oaXfpTunEntry	1.3.6.1.4.1.6926.1.18.1.2.3.1		not-accessible	An entry in the XFP Tunability Parameters Table
I32 oaXfpTunSlotIndex	1.3.6.1.4.1.6926.1.18.1.2.3.1.1	Integer32	not-accessible	The Tunable XFP slot number
I32 oaXfpTunPortIndex	1.3.6.1.4.1.6926.1.18.1.2.3.1.2	Integer32	not-accessible	The Tunable XFP port number
I32 oaXfpTunLaserFirstFrequency	1.3.6.1.4.1.6926.1.18.1.2.3.1.3	Integer32	read-only	First Frequency setting supported by the Tunable XFP port as defined in the factory prior shipment. Units: 0.001 Terahertz(THz)
I32 oaXfpTunLaserLastFrequency	1.3.6.1.4.1.6926.1.18.1.2.3.1.4	Integer32	read-only	Last Frequency setting supported by the Tunable XFP port as defined in the factory prior shipment. Units: 0.001 Terahertz(THz)
INT oaXfpTunGridSpacing	1.3.6.1.4.1.6926.1.18.1.2.3.1.5	INTEGER	read-only	The Tunable XFP port spacing. The port is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz g25 - 25 GHz
INT oaXfpTunLaserItuBand	1.3.6.1.4.1.6926.1.18.1.2.3.1.6	INTEGER	read-only	ITU Band setting supported by the Tunable XFP port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band
I32 oaXfpTunLaserItuCh	1.3.6.1.4.1.6926.1.18.1.2.3.1.7	Integer32	read-write	ITU Channel number of the Tunable XFP port * 1000.
oaDsfpMIBObjects	1.3.6.1.4.1.6926.1.18.1.3
I32 oaDsfpCompatibleInterfaceCount	1.3.6.1.4.1.6926.1.18.1.3.1	Integer32	read-only	The number of ports in the system which are DWDM sfp compatible
oaDsfpInfoTable	1.3.6.1.4.1.6926.1.18.1.3.2		not-accessible	The DWDM SFP information table.
oaDsfpInfoEntry	1.3.6.1.4.1.6926.1.18.1.3.2.1		not-accessible	An entry in the XFP Information Table
I32 oaDsfpInfoSlotIndex	1.3.6.1.4.1.6926.1.18.1.3.2.1.1	Integer32	not-accessible	The DWDM SFP slot number
I32 oaDsfpInfoPortIndex	1.3.6.1.4.1.6926.1.18.1.3.2.1.2	Integer32	not-accessible	The DWDM SFP port number
INT oaDsfpInfoChannelSpacing	1.3.6.1.4.1.6926.1.18.1.3.2.1.4	INTEGER	read-only	The densest channel spacing the modle is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz
I32 oaDsfpInfoChannelTuning	1.3.6.1.4.1.6926.1.18.1.3.2.1.5	Integer32	read-only	The number of channel over which the module may be tuned by user command (1 - 63).
oaMsa300PinMIBObjects	1.3.6.1.4.1.6926.1.18.1.4
I32 oaMsa300PinCompatibleIfCount	1.3.6.1.4.1.6926.1.18.1.4.1	Integer32	read-only	The number of ports in the system which are MSA 300 Pin compatible
oaMsa300PinIdTable	1.3.6.1.4.1.6926.1.18.1.4.2		not-accessible	The Msa300Pin Identifier table.
oaMsa300PinIdEntry	1.3.6.1.4.1.6926.1.18.1.4.2.1		not-accessible	An entry in the Msa300Pin Identifier Table
I32 oaMsa300PinIdSlotIndex	1.3.6.1.4.1.6926.1.18.1.4.2.1.1	Integer32	not-accessible	The MSA 300 Pin slot number
I32 oaMsa300PinIdPortIndex	1.3.6.1.4.1.6926.1.18.1.4.2.1.2	Integer32	not-accessible	The MSA 300 Pin port number
INT oaMsa300PinIdModuleTypeCode	1.3.6.1.4.1.6926.1.18.1.4.2.1.4	INTEGER	read-only	Port Type code. unknown - Unknown msa10Gb - 10Gb MSA msa10GbWdm - 10Gb MSA WDM
INT oaMsa300PinIdFirstLaserItuBand	1.3.6.1.4.1.6926.1.18.1.4.2.1.6	INTEGER	read-only	First ITU Band setting supported by the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band
I32 oaMsa300PinIdFirstLaserItuCh	1.3.6.1.4.1.6926.1.18.1.4.2.1.7	Integer32	read-only	First ITU Channel setting supported by the port (i.e. maximum wavelength) as defined in the factory prior shipment. Units: 0.01 Nano Meter(nm)
INT oaMsa300PinIdLastLaserItuBand	1.3.6.1.4.1.6926.1.18.1.4.2.1.8	INTEGER	read-only	Last ITU Band setting supported by the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band
I32 oaMsa300PinIdLastLaserItuCh	1.3.6.1.4.1.6926.1.18.1.4.2.1.9	Integer32	read-only	Last ITU Channel setting supported by the port (i.e. maximum wavelength) as defined in the factory prior shipment. Units: 0.01 Nano Meter(nm)
INT oaMsa300PinIdLaserItuChSpacing	1.3.6.1.4.1.6926.1.18.1.4.2.1.10	INTEGER	read-only	The MSA 300 Pin port spacing the port is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz g25 - 25 GHz
INT oaMsa300PinIdModuleDistanceType	1.3.6.1.4.1.6926.1.18.1.4.2.1.11	INTEGER	read-only	MSA Module Distance Type. unknown - Unknown msa40Km(2) - 40 km distance, msa80Km(3) - 80 km distance, msa120Km(4) - 120 km distance, msa160Km(5) - 160 km distance, msa200Km(6) - 200 km distance, msa340Km(7) - 340 km distance.
I32 oaMsa300PinIdMinDispDist	1.3.6.1.4.1.6926.1.18.1.4.2.1.12	Integer32	read-only	Minimum Dispersion distance of integrated TODC. (0) is returned when this feature is not supported Units: ps/nm
I32 oaMsa300PinIdMaxDispDist	1.3.6.1.4.1.6926.1.18.1.4.2.1.13	Integer32	read-only	Maximum Dispersion distance of integrated TODC. (0) is returned when this feature is not supported Units: ps/nm
oaMsa300PinMeasTable	1.3.6.1.4.1.6926.1.18.1.4.3		not-accessible	The MSA 300 Pin Measurement table.
oaMsa300PinMeasEntry	1.3.6.1.4.1.6926.1.18.1.4.3.1		not-accessible	An entry in the MSA 300 Pin Measurement Table
I32 oaMsa300PinMeasSlotIndex	1.3.6.1.4.1.6926.1.18.1.4.3.1.1	Integer32	not-accessible	The MSA 300 Pin slot number
I32 oaMsa300PinMeasPortIndex	1.3.6.1.4.1.6926.1.18.1.4.3.1.2	Integer32	not-accessible	The MSA 300 Pin port number
I32 oaMsa300PinMeasLaserOutputPwrMon	1.3.6.1.4.1.6926.1.18.1.4.3.1.4	Integer32	read-only	Laser output power. Units: 0.01 decibel (dBm)
I32 oaMsa300PinMeasLaserTempMon	1.3.6.1.4.1.6926.1.18.1.4.3.1.5	Integer32	read-only	Laser temperature. Units: 0.001 degrees Celsius (C)
I32 oaMsa300PinMeasRecSigAvrOptPower	1.3.6.1.4.1.6926.1.18.1.4.3.1.7	Integer32	read-only	Average received optical power. Units: 0.01 decibel (dBm)
I32 oaMsa300PinMeasLaserWlengthMon	1.3.6.1.4.1.6926.1.18.1.4.3.1.8	Integer32	read-only	The offset of the exact ITU channel wavelength. Units: Mega Hertz (MHz)
I32 oaMsa300PinMeasTransTempMon	1.3.6.1.4.1.6926.1.18.1.4.3.1.9	Integer32	read-only	Transponder Temperature. Units: 0.001 degrees Celsius (C)
oaMsa300PinAlarmTable	1.3.6.1.4.1.6926.1.18.1.4.4		not-accessible	The MSA 300 Pin Alarm table.
oaMsa300PinAlarmEntry	1.3.6.1.4.1.6926.1.18.1.4.4.1		not-accessible	An entry in the MSA 300 Pin Alarm Table
I32 oaMsa300PinAlarmSlotIndex	1.3.6.1.4.1.6926.1.18.1.4.4.1.1	Integer32	accessible-for-notify	The MSA 300 Pin slot number
I32 oaMsa300PinAlarmPortIndex	1.3.6.1.4.1.6926.1.18.1.4.4.1.2	Integer32	accessible-for-notify	The MSA 300 Pin port number
OCT oaMsa300PinAlarmTxAlarm	1.3.6.1.4.1.6926.1.18.1.4.4.1.3	OCTET STRING	read-only	Transmit Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x000000 ('0000 0000 0000 0000 0000 0000'B) - Normal (No alarm) 0x000001 ('0000 0000 0000 0000 0000 0001'B) - TxALM INT - Tx Summary alarm 0x000002 ('0000 0000 0000 0000 0000 0010'B) - Tunable DCM Not Ready alarm 0x000004 ('0000 0000 0000 0000 0000 0100'B) - LsTEMPALM - Laser temperature alarm 0x000008 ('0000 0000 0000 0000 0000 1000'B) - TxLOCKERR - Loss of TxPLL lock indicator 0x000020 ('0000 0000 0000 0000 0010 0000'B) - LsPOWALM - Laser power alarm 0x000200 ('0000 0000 0000 0010 0000 0000'B) - ModTEMPALM - Modulator temperature alarm 0x002000 ('0000 0000 0010 0000 0000 0000'B) - LsWAVALM - Laser Wavelength alarm Any combination of the bits represent the combination of the alarms
OCT oaMsa300PinAlarmRxAlarm	1.3.6.1.4.1.6926.1.18.1.4.4.1.4	OCTET STRING	read-only	Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x0000 ('0000 0000 0000 0000'B) - Normal (No alarm) 0x0001 ('0000 0000 0000 0001'B) - RxALM INT - Rx Summary alarm 0x0002 ('0000 0000 0000 0010'B) - RxPOWALM - Loss average optical power alarm Any combination of the bits represent the combination of the alarms
OCT oaMsa300PinAlarmPsAlarm	1.3.6.1.4.1.6926.1.18.1.4.4.1.5	OCTET STRING	read-only	Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x00 ('0000 0000'B) - Normal (No alarm) 0x01 ('0000 0001'B) - PSUMMARY (poerw summary) 0x02 ('0000 0010'B) - P5VANALOG (+5V analog) 0x04 ('0000 0100'B) - N5P2VANALOG (-5.2V analog) 0x08 ('0000 1000'B) - P3P3VANALOG (_3.3V analog) 0x10 ('0001 0000'B) - P3P3VDIGITAL (+3.3V digital) 0x20 ('0010 0000'B) - LVDIGITAL (+1.8V digital) 0x40 ('0100 0000'B) - N5P2VDIGITAL (-5.2V digital) Any combination of the bits represent the combination of the alarms
oaMsa300PinComTable	1.3.6.1.4.1.6926.1.18.1.4.5		not-accessible	The MSA 300 Pin Command table.
oaMsa300PinComEntry	1.3.6.1.4.1.6926.1.18.1.4.5.1		not-accessible	An entry in the MSA 300 Pin Command Table
I32 oaMsa300PinComSlotIndex	1.3.6.1.4.1.6926.1.18.1.4.5.1.1	Integer32	not-accessible	The MSA 300 Pin slot number
I32 oaMsa300PinComPortIndex	1.3.6.1.4.1.6926.1.18.1.4.5.1.2	Integer32	not-accessible	The MSA 300 Pin port number
INT oaMsa300PinComLaserItuBand	1.3.6.1.4.1.6926.1.18.1.4.5.1.7	INTEGER	read-write	ITU Band of the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band
I32 oaMsa300PinComLaserItuCh	1.3.6.1.4.1.6926.1.18.1.4.5.1.8	Integer32	read-write	ITU Channel wavelength of the port Units: 0.01 Nano Meter(nm)
I32 oaMsa300PinComDispDist	1.3.6.1.4.1.6926.1.18.1.4.5.1.9	Integer32	read-write	Dispersion distance of integrated TODC. Units: ps/nm
INT oaMsa300PinComPolarityInversion	1.3.6.1.4.1.6926.1.18.1.4.5.1.10	INTEGER	read-write	Polarity Inversion feature of the port. Supported for TM-DXFPT modules only, if this feature is defined for module.
oaSfpConformance	1.3.6.1.4.1.6926.1.18.2
oaSfpGroups	1.3.6.1.4.1.6926.1.18.2.1
oaSfpCompatibleIfCountGroup	1.3.6.1.4.1.6926.1.18.2.1.1			A collection of objects providing information on number of specific compatible ports.
oaSfpGroup	1.3.6.1.4.1.6926.1.18.2.1.2			A collection of objects providing information on SFP compatible ports.
oaXfpGroup	1.3.6.1.4.1.6926.1.18.2.1.3			A collection of objects providing information on XFP compatible ports.
oaDsfpGroup	1.3.6.1.4.1.6926.1.18.2.1.4			A collection of objects providing information on DSFP compatible ports.
oaMsa300PinGroup	1.3.6.1.4.1.6926.1.18.2.1.5			A collection of objects providing information on MSA 300 Pin compatible ports.
oaMsa300PinNotificationsGroup	1.3.6.1.4.1.6926.1.18.2.1.6			The notifications which are required to be supported by implementations of this MIB.
oaPlugConnNotificationsGroup	1.3.6.1.4.1.6926.1.18.2.1.7			The notifications which are required to be supported by implementations of this MIB.
oaXfpTunGroup	1.3.6.1.4.1.6926.1.18.2.1.8			A collection of objects providing information on Tunable XFP compatible ports.
oaSfpCompliances	1.3.6.1.4.1.6926.1.18.2.2
oaSfpCompliance	1.3.6.1.4.1.6926.1.18.2.2.1			The compliance statement for SNMP entities which have SFP/DSFP/XFP/MSA300Pin module interfaces.

RFC description

Vendor-private MIB for managing Optical Access Small Form-factor Pluggable (SFP) transceiver modules and optics.

Start monitoring MRV Communications optical access equipment (pluggable SFP transceiver monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OA-SFP-MIB

What Is OA-SFP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description