OA-SFP-MIB :: oaMsa300PinAlarmPsAlarm

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsOA-SFP-MIBoaMsa300PinAlarmPsAlarm

oaMsa300PinAlarmPsAlarm

Module: OA-SFP-MIB

OID (symbolic): OA-SFP-MIB::oaMsa300PinAlarmPsAlarm

OID (numeric): 1.3.6.1.4.1.6926.1.18.1.4.4.1.5

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit represents an alarm. If the object is zero - no alarm is active. 0x00 ('0000 0000'B) - Normal (No alarm) 0x01 ('0000 0001'B) - PSUMMARY (poerw summary) 0x02 ('0000 0010'B) - P5VANALOG (+5V analog) 0x04 ('0000 0100'B) - N5P2VANALOG (-5.2V analog) 0x08 ('0000 1000'B) - P3P3VANALOG (_3.3V analog) 0x10 ('0001 0000'B) - P3P3VDIGITAL (+3.3V digital) 0x20 ('0010 0000'B) - LVDIGITAL (+1.8V digital) 0x40 ('0100 0000'B) - N5P2VDIGITAL (-5.2V digital) Any combination of the bits represent the combination of the alarms

What is oaMsa300PinAlarmPsAlarm?

This is a 1-byte bitmap of power-supply alarms for this 300-pin MSA module, covering specific rails such as +3.3V analog or -5.2V digital; a value of zero means no alarm is active, and reading the register clears a latched alarm bit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6926.1.18.1.4.4.1.5
snmpwalk -v2c -c public <target> OA-SFP-MIB::oaMsa300PinAlarmPsAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6926.1.18.1.4.4.1.5.1
snmpget -v2c -c public <target> OA-SFP-MIB::oaMsa300PinAlarmPsAlarm.1

Start monitoring MRV Communications optical access equipment (pluggable SFP transceiver monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OA-SFP-MIB::oaMsa300PinAlarmPsAlarm OID value, configure state conditions and alerts, and monitor any MRV Communications optical access equipment (pluggable SFP transceiver monitoring) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6926oaccessOA-SFP-MIB
1.3.6.1.4.1.6926.1oaManagementOA-SFP-MIB
1.3.6.1.4.1.6926.1.18oaSfpMibOA-SFP-MIB
1.3.6.1.4.1.6926.1.18.1oaSfpOA-SFP-MIB
1.3.6.1.4.1.6926.1.18.1.4oaMsa300PinMIBObjectsOA-SFP-MIB
1.3.6.1.4.1.6926.1.18.1.4.4oaMsa300PinAlarmTableOA-SFP-MIB
1.3.6.1.4.1.6926.1.18.1.4.4.1oaMsa300PinAlarmEntryOA-SFP-MIB
1.3.6.1.4.1.6926.1.18.1.4.4.1.5oaMsa300PinAlarmPsAlarmOA-SFP-MIB