Nortel-MsCarrier-MscPassport-IpxMIB

All MIBs › Nortel-MsCarrier-MscPassport-IpxMIB

Category: IP Routing & Forwarding, IPX Networking, Nortel MsCarrier MscPassport

Description: Defines SNMP objects for IPX protocol routing and interface management on Nortel MsCarrier MscPassport multiservice switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-MsCarrier-MscPassport-IpxMIB?

Nortel-MsCarrier-MscPassport-IpxMIB is a Nortel Networks (Magellan Passport carrier switch platform) proprietary MIB managing per-virtual-router IPX (mscVrPpIpxP) components. Its row-status table controls creation/deletion, an admin-control table sets SNMP admin status, a provisioning table records network number, default type, and broadcast-inhibit flag, a source-route-provisioning table records end-station support, a state table records admin/operational/usage state, and an operational-status table. As a configuration/status MIB it lets an administrator confirm IPX network-number assignment and broadcast handling per virtual router on a Nortel Magellan Passport switch. It is deployed on Nortel Networks Magellan Passport carrier switching platforms (IPX). Engineers can download the Nortel-MsCarrier-MscPassport-IpxMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-IpxMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Networks Magellan Passport carrier switching platforms (IPX)

Monitoring Examples

An administrator checks mscVrPpIpxPNetworkNumberProv and mscVrPpIpxPBroadcastInhibit to confirm IPX network configuration on a Nortel Magellan Passport switch.

What Can Be Monitored

per-virtual-router IPX network-number and broadcast configuration

Imported Objects

From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB

Counter32
DisplayString
Gauge32
Integer32
PhysAddress
RowStatus
StorageType
Unsigned32

From Nortel-MsCarrier-MscPassport-TextualConventionsMIB

AsciiString
AsciiStringIndex
DashedHexString
Hex
NonReplicated

From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB

mscPassportMIBs

OBJECT-IDENTITY

From Nortel-MsCarrier-MscPassport-VirtualRouterMIB

mscVr	OBJECT-IDENTITY
mscVrIndex	OBJECT-TYPE
mscVrPp	OBJECT-IDENTITY
mscVrPpIndex	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
mscVrPpIpxP	1.3.6.1.4.1.562.36.2.1.100.3.6
mscVrPpIpxPRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.3.6.1		not-accessible	This entry controls the addition and deletion of mscVrPpIpxP components.
mscVrPpIpxPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.1.1		not-accessible	A single entry in the table represents a single mscVrPpIpxP component.
ROW mscVrPpIpxPRowStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrPpIpxP components. These components can be added and deleted.
STR mscVrPpIpxPComponentName	1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrPpIpxPStorageType	1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrPpIpxP tables.
INT mscVrPpIpxPIndex	1.3.6.1.4.1.562.36.2.1.100.3.6.1.1.10	INTEGER	not-accessible	This variable represents the index for the mscVrPpIpxP tables.
mscVrPpIpxPRipP	1.3.6.1.4.1.562.36.2.1.100.3.6.2
mscVrPpIpxPRipPRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.3.6.2.1		not-accessible	This entry controls the addition and deletion of mscVrPpIpxPRipP components.
mscVrPpIpxPRipPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1		not-accessible	A single entry in the table represents a single mscVrPpIpxPRipP component.
ROW mscVrPpIpxPRipPRowStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrPpIpxPRipP components. These components cannot be added nor deleted.
STR mscVrPpIpxPRipPComponentName	1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrPpIpxPRipPStorageType	1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrPpIpxPRipP tables.
NON mscVrPpIpxPRipPIndex	1.3.6.1.4.1.562.36.2.1.100.3.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrPpIpxPRipP tables.
mscVrPpIpxPRipPStatsTable	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10		not-accessible	RIP specific statistics for this IpxPort.
mscVrPpIpxPRipPStatsEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1		not-accessible	An entry in the mscVrPpIpxPRipPStatsTable.
C32 mscVrPpIpxPRipPInPackets	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.1	Counter32	read-only	The number of RIP packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPRipPInRequests	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.2	Counter32	read-only	The number of RIP request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPRipPInResponses	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.3	Counter32	read-only	The number of RIP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPRipPOutPackets	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.4	Counter32	read-only	The number of RIP packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPRipPOutRequests	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.5	Counter32	read-only	The number of RIP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPRipPOutResponses	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.6	Counter32	read-only	The number of RIP response packets sent out on this IpxPort. This includes RIP periodic update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPRipPIncorrectPackets	1.3.6.1.4.1.562.36.2.1.100.3.6.2.10.1.7	Counter32	read-only	Number of times that an incorrectly formatted RIP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
mscVrPpIpxPSapP	1.3.6.1.4.1.562.36.2.1.100.3.6.3
mscVrPpIpxPSapPRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.3.6.3.1		not-accessible	This entry controls the addition and deletion of mscVrPpIpxPSapP components.
mscVrPpIpxPSapPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1		not-accessible	A single entry in the table represents a single mscVrPpIpxPSapP component.
ROW mscVrPpIpxPSapPRowStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrPpIpxPSapP components. These components cannot be added nor deleted.
STR mscVrPpIpxPSapPComponentName	1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrPpIpxPSapPStorageType	1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrPpIpxPSapP tables.
NON mscVrPpIpxPSapPIndex	1.3.6.1.4.1.562.36.2.1.100.3.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrPpIpxPSapP tables.
mscVrPpIpxPSapPStatsTable	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10		not-accessible	SAP specific statistics for this IpxPort.
mscVrPpIpxPSapPStatsEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1		not-accessible	An entry in the mscVrPpIpxPSapPStatsTable.
C32 mscVrPpIpxPSapPInPackets	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.1	Counter32	read-only	The total number of SAP packets received on this IpxPort. Includes SAP requests and responses. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPSapPInRequests	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.2	Counter32	read-only	The number of SAP Request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPSapPInResponses	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.3	Counter32	read-only	The number of SAP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPSapPOutPackets	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.4	Counter32	read-only	The total number of SAP packets sent out this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPSapPOutRequests	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.5	Counter32	read-only	The number of SAP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPSapPOutResponses	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.6	Counter32	read-only	The number of SAP response packets sent out this IpxPort. This includes periodic SAP update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPSapPIncorrectPackets	1.3.6.1.4.1.562.36.2.1.100.3.6.3.10.1.7	Counter32	read-only	Number of times an incorrectly formatted SAP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
mscVrPpIpxPIWP	1.3.6.1.4.1.562.36.2.1.100.3.6.4
mscVrPpIpxPIWPRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.3.6.4.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscVrPpIpxPIWP components.
mscVrPpIpxPIWPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1		not-accessible	A single entry in the table represents a single mscVrPpIpxPIWP component.
ROW mscVrPpIpxPIWPRowStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrPpIpxPIWP components. These components cannot be added nor deleted.
STR mscVrPpIpxPIWPComponentName	1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrPpIpxPIWPStorageType	1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrPpIpxPIWP tables.
STR mscVrPpIpxPIWPRemoteStationIdentifierIndex	1.3.6.1.4.1.562.36.2.1.100.3.6.4.1.1.10	DashedHexString	not-accessible	This variable represents the index for the mscVrPpIpxPIWP tables.
mscVrPpIpxPIWPOperTable	1.3.6.1.4.1.562.36.2.1.100.3.6.4.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains operational attributes that are specific for the IPXWAN protocol.
mscVrPpIpxPIWPOperEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1		not-accessible	An entry in the mscVrPpIpxPIWPOperTable.
STR mscVrPpIpxPIWPNeighbourRouterName	1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1.1	AsciiString	read-only	The name of the neighboring router on a WAN circuit.
STR mscVrPpIpxPIWPNeighbourInternalNetworkNumber	1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1.2	DashedHexString	read-only	The internal network number of the neighboring router on a WAN circuit.
C32 mscVrPpIpxPIWPInitFails	1.3.6.1.4.1.562.36.2.1.100.3.6.4.10.1.3	Counter32	read-only	The number of times initialization has failed on this circuit. This counter wraps around to zero after reaching the maximum value of 4294967295
mscVrPpIpxPNetSentryP	1.3.6.1.4.1.562.36.2.1.100.3.6.5
mscVrPpIpxPNetSentryPRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.3.6.5.1		not-accessible	This entry controls the addition and deletion of mscVrPpIpxPNetSentryP components.
mscVrPpIpxPNetSentryPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1		not-accessible	A single entry in the table represents a single mscVrPpIpxPNetSentryP component.
ROW mscVrPpIpxPNetSentryPRowStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrPpIpxPNetSentryP components. These components can be added and deleted.
STR mscVrPpIpxPNetSentryPComponentName	1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrPpIpxPNetSentryPStorageType	1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrPpIpxPNetSentryP tables.
NON mscVrPpIpxPNetSentryPIndex	1.3.6.1.4.1.562.36.2.1.100.3.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrPpIpxPNetSentryP tables.
mscVrPpIpxPNetSentryPProvTable	1.3.6.1.4.1.562.36.2.1.100.3.6.5.10		not-accessible	This group contains the NetSentry attributes that specify the names of the NetSentry filters which will be applied to IPX packets as incoming and outgoing filters.
mscVrPpIpxPNetSentryPProvEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.5.10.1		not-accessible	An entry in the mscVrPpIpxPNetSentryPProvTable.
STR mscVrPpIpxPNetSentryPInComingFilter	1.3.6.1.4.1.562.36.2.1.100.3.6.5.10.1.1	AsciiString	read-write	This attribute specifies the name of the NetSentry filter applied to incoming IPX packets on this port.
STR mscVrPpIpxPNetSentryPOutGoingFilter	1.3.6.1.4.1.562.36.2.1.100.3.6.5.10.1.2	AsciiString	read-write	The name of the filter applied to outgoing IPX packets on this port.
mscVrPpIpxPAdminControlTable	1.3.6.1.4.1.562.36.2.1.100.3.6.100		not-accessible	This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
mscVrPpIpxPAdminControlEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.100.1		not-accessible	An entry in the mscVrPpIpxPAdminControlTable.
INT mscVrPpIpxPSnmpAdminStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.100.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
mscVrPpIpxPProvTable	1.3.6.1.4.1.562.36.2.1.100.3.6.101		not-accessible	The Provisionable group for the IpxPort component.
mscVrPpIpxPProvEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.101.1		not-accessible	An entry in the mscVrPpIpxPProvTable.
STR mscVrPpIpxPNetworkNumberProv	1.3.6.1.4.1.562.36.2.1.100.3.6.101.1.1	DashedHexString	read-write	The Ipx network number of the network directly connected to this port.
INT mscVrPpIpxPDefaultType	1.3.6.1.4.1.562.36.2.1.100.3.6.101.1.2	INTEGER	read-write	This attribute indicates which protocol is to run on a protocol port. In the case of a lan media it is to be set to broadcast. In the case of WAN media the following choices are to be exercised: For running Pre-IPXWAN RIP set value to other. For running numbered RIP set value to wanRip. For running un-numbered RIP set value to unnumberedRip. Setting this value to ppp will signify unnumbered Rip running on a ppp port.
INT mscVrPpIpxPBroadcastInhibit	1.3.6.1.4.1.562.36.2.1.100.3.6.101.1.3	INTEGER	read-write	If this attribute is set, all outgoing periodic and triggered updates for RIP and SAP will be inhibited for the port. However the port will still accept incoming RIP and SAP packets on the port. This may be useful for ports with only a bank of servers on its network in order to limit the routing traffic, assuming that servers don't require routing information or other server information.
mscVrPpIpxPSresProvTable	1.3.6.1.4.1.562.36.2.1.100.3.6.102		not-accessible	This group contains the provisioned attributes for SourceRouteEndStation support.
mscVrPpIpxPSresProvEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.102.1		not-accessible	An entry in the mscVrPpIpxPSresProvTable.
INT mscVrPpIpxPSourceRouteEndStationSupport	1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1	INTEGER	read-write	This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component.
mscVrPpIpxPStateTable	1.3.6.1.4.1.562.36.2.1.100.3.6.103		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscVrPpIpxPStateEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.103.1		not-accessible	An entry in the mscVrPpIpxPStateTable.
INT mscVrPpIpxPAdminState	1.3.6.1.4.1.562.36.2.1.100.3.6.103.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscVrPpIpxPOperationalState	1.3.6.1.4.1.562.36.2.1.100.3.6.103.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscVrPpIpxPUsageState	1.3.6.1.4.1.562.36.2.1.100.3.6.103.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscVrPpIpxPOperStatusTable	1.3.6.1.4.1.562.36.2.1.100.3.6.104		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscVrPpIpxPOperStatusEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.104.1		not-accessible	An entry in the mscVrPpIpxPOperStatusTable.
INT mscVrPpIpxPSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.100.3.6.104.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscVrPpIpxPOperTable	1.3.6.1.4.1.562.36.2.1.100.3.6.105		not-accessible	The IpxPort Operational Attributes.
mscVrPpIpxPOperEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.105.1		not-accessible	An entry in the mscVrPpIpxPOperTable.
INT mscVrPpIpxPType	1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.1	INTEGER	read-only	The type of the circuit. This would differ from the provisioned type when a different routing protocol is negotiated with the peer.
INT mscVrPpIpxPEncapsulation	1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.2	INTEGER	read-only	Packet encapsulation type that the router has determined to use on the port. There are seven encapsulation types used to identify IPX datagram as listed below. 1. link: IPX encapsulation type for PPP, ATM MPE, and X25DTE media types. 2. ethernet: IPX encapsulation type for Ethernet and FrDte media types. 3. novell: IPX encapsulation type for Ethernet and FrDte media types. 4. sap: IPX encapsulation type for FDDI, Token Ring, Ethernet and FrDte media types. 5. snap: IPX encapsulation type for FDDI, Token Ring, Ethernet, and FrDte media types. 6. vns: IPX encapsulation type for VNS media type. 7. tunnel: IPX encapsulation type for Tunnel media type.
STR mscVrPpIpxPNetworkNumber	1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.3	DashedHexString	read-only	The Ipx network number from the provisioned networkNumberProv value.
STR mscVrPpIpxPNode	1.3.6.1.4.1.562.36.2.1.100.3.6.105.1.4	DashedHexString	read-only	The Ipx node address of this IpxPort.
mscVrPpIpxPStatsTable	1.3.6.1.4.1.562.36.2.1.100.3.6.106		not-accessible	The IpxPort Statistics group.
mscVrPpIpxPStatsEntry	1.3.6.1.4.1.562.36.2.1.100.3.6.106.1		not-accessible	An entry in the mscVrPpIpxPStatsTable.
C32 mscVrPpIpxPStateChanges	1.3.6.1.4.1.562.36.2.1.100.3.6.106.1.1	Counter32	read-only	Number of times the port has changed state. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPInReceives	1.3.6.1.4.1.562.36.2.1.100.3.6.106.1.2	Counter32	read-only	Total number of packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrPpIpxPForwarded	1.3.6.1.4.1.562.36.2.1.100.3.6.106.1.3	Counter32	read-only	Number of packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.
mscVrIpx	1.3.6.1.4.1.562.36.2.1.100.7
mscVrIpxRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.1		not-accessible	This entry controls the addition and deletion of mscVrIpx components.
mscVrIpxRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.1.1		not-accessible	A single entry in the table represents a single mscVrIpx component.
ROW mscVrIpxRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpx components. These components can be added and deleted.
STR mscVrIpxComponentName	1.3.6.1.4.1.562.36.2.1.100.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxStorageType	1.3.6.1.4.1.562.36.2.1.100.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpx tables.
NON mscVrIpxIndex	1.3.6.1.4.1.562.36.2.1.100.7.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrIpx tables.
mscVrIpxRip	1.3.6.1.4.1.562.36.2.1.100.7.2
mscVrIpxRipRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.2.1		not-accessible	This entry controls the addition and deletion of mscVrIpxRip components.
mscVrIpxRipRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.1.1		not-accessible	A single entry in the table represents a single mscVrIpxRip component.
ROW mscVrIpxRipRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrIpxRip components. These components cannot be added nor deleted.
STR mscVrIpxRipComponentName	1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxRipStorageType	1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxRip tables.
NON mscVrIpxRipIndex	1.3.6.1.4.1.562.36.2.1.100.7.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrIpxRip tables.
mscVrIpxRipRFltr	1.3.6.1.4.1.562.36.2.1.100.7.2.2
mscVrIpxRipRFltrRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.2.2.1		not-accessible	This entry controls the addition and deletion of mscVrIpxRipRFltr components.
mscVrIpxRipRFltrRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1		not-accessible	A single entry in the table represents a single mscVrIpxRipRFltr component.
ROW mscVrIpxRipRFltrRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpxRipRFltr components. These components can be added and deleted.
STR mscVrIpxRipRFltrComponentName	1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxRipRFltrStorageType	1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxRipRFltr tables.
I32 mscVrIpxRipRFltrIdentifierIndex	1.3.6.1.4.1.562.36.2.1.100.7.2.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscVrIpxRipRFltr tables.
mscVrIpxRipRFltrProvTable	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10		not-accessible	This is the provisionable attribute group for RipFilter.
mscVrIpxRipRFltrProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1		not-accessible	An entry in the mscVrIpxRipRFltrProvTable.
STR mscVrIpxRipRFltrHops	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1	AsciiString	read-write	This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operator(=), less than operator() should be interpreted as matching all RIP packet tuples which are an equal, smaller or greater distance, respectively, away from the switch than the hops value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The number of hops is specified as a decimal number between 0 and 999.
STR mscVrIpxRipRFltrTicks	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.2	AsciiString	read-write	This attribute specifies the distance in terms of delay in ticks. A tick is 1/ 18 of a second. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A ticks value preceded by a equality operator(=), less than operator() should be interpreted as matching all RIP packet tuples which are an equal, greater or lower delay, respectively, away from the switch than the ticks value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The ticks value is specified as a decimal number between 0 and 999.
STR mscVrIpxRipRFltrNetworkNumber	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.3	AsciiString	read-write	This attribute specifies the network number of matching networks in RIP packets to be filtered or passed depending on the disposition of the filter. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid network number would be ff-ff-ff-?? or ffffff??). Wildcard characters may be used only in pairs to replace a pair of hex digits. Filters with a network number preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for the tuples with this network number. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
STR mscVrIpxRipRFltrNode	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.4	AsciiString	read-write	This attribute specifies the node portion in the source IPX address (that is, the MAC address or circuit ID) of received RIP packets for which the contained network tuples should be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the input direction and will be ignored if the filter is applied in the output direction.The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid node number would be 00-20-??-??-??-?? or 0020???????? ). Wildcard characters may be used only in pairs to replace a pair of hex digits. A node number preceded by a caret (^) should be interpreted as matching all RIP packets' network tuples except for the RIP packets with this source node address. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
STR mscVrIpxRipRFltrPort	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5	AsciiString	read-write	This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and will be ignored if the filter is applied in the input direction. This attribute is entered as an ascii string and must correspond to a name of a provisioned protocol port. A port name preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for those learned on this port. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
INT mscVrIpxRipRFltrDisposition	1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.6	INTEGER	read-write	This attribute indicates a reversal of the filter pattern match. If the value is pass, then matching filters will cause the RIP packet tuple to be passed. If the value is filter, then matching filters will cause the RIP packet tuple to be filtered.
mscVrIpxRipRFltrOperTable	1.3.6.1.4.1.562.36.2.1.100.7.2.2.11		not-accessible	This is the operational attribute group for IpxRipFilter.
mscVrIpxRipRFltrOperEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.2.11.1		not-accessible	An entry in the mscVrIpxRipRFltrOperTable.
G32 mscVrIpxRipRFltrNumberOfApplyEntries	1.3.6.1.4.1.562.36.2.1.100.7.2.2.11.1.1	Gauge32	read-only	This attribute indicates the number of times this filter is referenced by a RipApplyEntry. If zero, this filter is not applied on any ports.
mscVrIpxRipRipApp	1.3.6.1.4.1.562.36.2.1.100.7.2.3
mscVrIpxRipRipAppRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1		not-accessible	This entry controls the addition and deletion of mscVrIpxRipRipApp components.
mscVrIpxRipRipAppRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1		not-accessible	A single entry in the table represents a single mscVrIpxRipRipApp component.
ROW mscVrIpxRipRipAppRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpxRipRipApp components. These components can be added and deleted.
STR mscVrIpxRipRipAppComponentName	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxRipRipAppStorageType	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxRipRipApp tables.
STR mscVrIpxRipRipAppProtocolPortNameIndex	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.10	AsciiStringIndex	not-accessible	This variable represents an index for the mscVrIpxRipRipApp tables.
I32 mscVrIpxRipRipAppFilterIdentifierIndex	1.3.6.1.4.1.562.36.2.1.100.7.2.3.1.1.11	Integer32	not-accessible	This variable represents an index for the mscVrIpxRipRipApp tables.
mscVrIpxRipRipAppProvTable	1.3.6.1.4.1.562.36.2.1.100.7.2.3.10		not-accessible	This is the RipApplyEntry provisionable group of attributes.
mscVrIpxRipRipAppProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.3.10.1		not-accessible	An entry in the mscVrIpxRipRipAppProvTable.
INT mscVrIpxRipRipAppDirection	1.3.6.1.4.1.562.36.2.1.100.7.2.3.10.1.1	INTEGER	read-write	This attribute specifies whether this RIP filter is applied as an input filter or an output filter. If set to none, this indicates that the filter, though applied to the port, is not currently active in either direction.
mscVrIpxRipStatsTable	1.3.6.1.4.1.562.36.2.1.100.7.2.10		not-accessible	IPX statistics related to the RIP protocol.
mscVrIpxRipStatsEntry	1.3.6.1.4.1.562.36.2.1.100.7.2.10.1		not-accessible	An entry in the mscVrIpxRipStatsTable.
C32 mscVrIpxRipRipIn	1.3.6.1.4.1.562.36.2.1.100.7.2.10.1.1	Counter32	read-only	This attribute counts the total number of IPX RIP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxRipRipOut	1.3.6.1.4.1.562.36.2.1.100.7.2.10.1.2	Counter32	read-only	This attribute counts the total number of RIP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxRipRipIncorrectPackets	1.3.6.1.4.1.562.36.2.1.100.7.2.10.1.3	Counter32	read-only	This attribute counts the number of times an incorrectly formatted RIP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.
mscVrIpxSap	1.3.6.1.4.1.562.36.2.1.100.7.3
mscVrIpxSapRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.3.1		not-accessible	This entry controls the addition and deletion of mscVrIpxSap components.
mscVrIpxSapRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.1.1		not-accessible	A single entry in the table represents a single mscVrIpxSap component.
ROW mscVrIpxSapRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrIpxSap components. These components cannot be added nor deleted.
STR mscVrIpxSapComponentName	1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxSapStorageType	1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxSap tables.
NON mscVrIpxSapIndex	1.3.6.1.4.1.562.36.2.1.100.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrIpxSap tables.
mscVrIpxSapSFltr	1.3.6.1.4.1.562.36.2.1.100.7.3.2
mscVrIpxSapSFltrRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.3.2.1		not-accessible	This entry controls the addition and deletion of mscVrIpxSapSFltr components.
mscVrIpxSapSFltrRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1		not-accessible	A single entry in the table represents a single mscVrIpxSapSFltr component.
ROW mscVrIpxSapSFltrRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpxSapSFltr components. These components can be added and deleted.
STR mscVrIpxSapSFltrComponentName	1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxSapSFltrStorageType	1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxSapSFltr tables.
I32 mscVrIpxSapSFltrIdentifierIndex	1.3.6.1.4.1.562.36.2.1.100.7.3.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscVrIpxSapSFltr tables.
mscVrIpxSapSFltrProvTable	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10		not-accessible	The provisionable attribute group for SapFilter.
mscVrIpxSapSFltrProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1		not-accessible	An entry in the mscVrIpxSapSFltrProvTable.
STR mscVrIpxSapSFltrType	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.1	AsciiString	read-write	This attribute specifies the Novell Service type of the services to be filtered from the SAP packets. The type can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 4 digits. (For example a valid type would be ff-ff or ffff). A type preceded by a caret(^) should be interpreted as filtering all SAP packets except for those with this type.
STR mscVrIpxSapSFltrName	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.2	AsciiString	read-write	This attribute specifies the readable name of the service to be filtered from SAP packets. The name can be 47 characters or less. This does not include the caret (^) character which precedes the name. A name preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this name.
STR mscVrIpxSapSFltrNetworkNumber	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.3	AsciiString	read-write	This attribute specifies the network number of the service to be filtered from SAP packets. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). A network number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this network number.
STR mscVrIpxSapSFltrNode	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.4	AsciiString	read-write	This attribute specifies the node portion of the IPX address of the service to be filtered from SAP packets. The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits.. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). A node number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this node number.
INT mscVrIpxSapSFltrDisposition	1.3.6.1.4.1.562.36.2.1.100.7.3.2.10.1.5	INTEGER	read-write	Indicates a reversal of the filter pattern match.
mscVrIpxSapSFltrOperTable	1.3.6.1.4.1.562.36.2.1.100.7.3.2.11		not-accessible	The operational attribute group for IpxSapFilter.
mscVrIpxSapSFltrOperEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.2.11.1		not-accessible	An entry in the mscVrIpxSapSFltrOperTable.
G32 mscVrIpxSapSFltrNumberOfApplyEntries	1.3.6.1.4.1.562.36.2.1.100.7.3.2.11.1.1	Gauge32	read-only	The number of times this filter appears in IpxSapApplyEntry. If zero, this filter is not applied on any ports.
mscVrIpxSapSapApp	1.3.6.1.4.1.562.36.2.1.100.7.3.3
mscVrIpxSapSapAppRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1		not-accessible	This entry controls the addition and deletion of mscVrIpxSapSapApp components.
mscVrIpxSapSapAppRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1		not-accessible	A single entry in the table represents a single mscVrIpxSapSapApp component.
ROW mscVrIpxSapSapAppRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpxSapSapApp components. These components can be added and deleted.
STR mscVrIpxSapSapAppComponentName	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxSapSapAppStorageType	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxSapSapApp tables.
STR mscVrIpxSapSapAppProtocolPortNameIndex	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.10	AsciiStringIndex	not-accessible	This variable represents an index for the mscVrIpxSapSapApp tables.
I32 mscVrIpxSapSapAppFilterIdentifierIndex	1.3.6.1.4.1.562.36.2.1.100.7.3.3.1.1.11	Integer32	not-accessible	This variable represents an index for the mscVrIpxSapSapApp tables.
mscVrIpxSapSapAppProvTable	1.3.6.1.4.1.562.36.2.1.100.7.3.3.10		not-accessible	The IpxSapApplyEntry provisionable group of attributes.
mscVrIpxSapSapAppProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.3.10.1		not-accessible	An entry in the mscVrIpxSapSapAppProvTable.
INT mscVrIpxSapSapAppDirection	1.3.6.1.4.1.562.36.2.1.100.7.3.3.10.1.1	INTEGER	read-write	Indicates whether this SAP filter is applied as an input filter or an output filter.
mscVrIpxSapStatsTable	1.3.6.1.4.1.562.36.2.1.100.7.3.10		not-accessible	IPX statistics specific to the SAP protocol.
mscVrIpxSapStatsEntry	1.3.6.1.4.1.562.36.2.1.100.7.3.10.1		not-accessible	An entry in the mscVrIpxSapStatsTable.
C32 mscVrIpxSapSapIn	1.3.6.1.4.1.562.36.2.1.100.7.3.10.1.1	Counter32	read-only	The total number of SAP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxSapSapOut	1.3.6.1.4.1.562.36.2.1.100.7.3.10.1.2	Counter32	read-only	The total number of SAP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxSapSapIncorrectPackets	1.3.6.1.4.1.562.36.2.1.100.7.3.10.1.3	Counter32	read-only	The number of times an incorrectly formatted SAP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.
mscVrIpxFwd	1.3.6.1.4.1.562.36.2.1.100.7.4
mscVrIpxFwdRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.4.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscVrIpxFwd components.
mscVrIpxFwdRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.4.1.1		not-accessible	A single entry in the table represents a single mscVrIpxFwd component.
ROW mscVrIpxFwdRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrIpxFwd components. These components cannot be added nor deleted.
STR mscVrIpxFwdComponentName	1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxFwdStorageType	1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxFwd tables.
STR mscVrIpxFwdNetworkNumberIndex	1.3.6.1.4.1.562.36.2.1.100.7.4.1.1.10	DashedHexString	not-accessible	This variable represents the index for the mscVrIpxFwd tables.
mscVrIpxFwdOperTable	1.3.6.1.4.1.562.36.2.1.100.7.4.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * IpxForwarding operational attributes.
mscVrIpxFwdOperEntry	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1		not-accessible	An entry in the mscVrIpxFwdOperTable.
INT mscVrIpxFwdProtocol	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.1	INTEGER	read-only	The routing protocol from which knowledge of this destination was obtained.
U32 mscVrIpxFwdTicks	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.2	Unsigned32	read-only	The delay, in ticks, to reach this destination.
G32 mscVrIpxFwdHopCount	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.3	Gauge32	read-only	The number of hops required to reach this destination.
STR mscVrIpxFwdProtocolPortId	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.4	AsciiString	read-only	The unique identifier of the ProtocolPort used to reach the next hop.
PHY mscVrIpxFwdNextHopPhysAddress	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.5	PhysAddress	read-only	The physical address of the next hop
STR mscVrIpxFwdNextHopNetworkNumber	1.3.6.1.4.1.562.36.2.1.100.7.4.10.1.6	DashedHexString	read-only	The IPX network number of the next hop.
mscVrIpxSrvc	1.3.6.1.4.1.562.36.2.1.100.7.5
mscVrIpxSrvcRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.5.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscVrIpxSrvc components.
mscVrIpxSrvcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1		not-accessible	A single entry in the table represents a single mscVrIpxSrvc component.
ROW mscVrIpxSrvcRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrIpxSrvc components. These components cannot be added nor deleted.
STR mscVrIpxSrvcComponentName	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxSrvcStorageType	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxSrvc tables.
STR mscVrIpxSrvcNetworkNumberIndex	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.10	DashedHexString	not-accessible	This variable represents an index for the mscVrIpxSrvc tables.
STR mscVrIpxSrvcNodeIndex	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.11	DashedHexString	not-accessible	This variable represents an index for the mscVrIpxSrvc tables.
I32 mscVrIpxSrvcTypeIndex	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.12	Integer32	not-accessible	This variable represents an index for the mscVrIpxSrvc tables.
STR mscVrIpxSrvcNameIndex	1.3.6.1.4.1.562.36.2.1.100.7.5.1.1.13	AsciiStringIndex	not-accessible	This variable represents an index for the mscVrIpxSrvc tables.
mscVrIpxSrvcOperTable	1.3.6.1.4.1.562.36.2.1.100.7.5.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * The Ipx Services Operational group.
mscVrIpxSrvcOperEntry	1.3.6.1.4.1.562.36.2.1.100.7.5.10.1		not-accessible	An entry in the mscVrIpxSrvcOperTable.
HEX mscVrIpxSrvcSocket	1.3.6.1.4.1.562.36.2.1.100.7.5.10.1.1	Hex	read-only	Socket at which the service is available
INT mscVrIpxSrvcProtocol	1.3.6.1.4.1.562.36.2.1.100.7.5.10.1.2	INTEGER	read-only	The protocol from which knowledge of this service was obtained.
G32 mscVrIpxSrvcHopCount	1.3.6.1.4.1.562.36.2.1.100.7.5.10.1.3	Gauge32	read-only	Number of hops to the service.
mscVrIpxAdj	1.3.6.1.4.1.562.36.2.1.100.7.6
mscVrIpxAdjRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.6.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscVrIpxAdj components.
mscVrIpxAdjRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.6.1.1		not-accessible	A single entry in the table represents a single mscVrIpxAdj component.
ROW mscVrIpxAdjRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscVrIpxAdj components. These components cannot be added nor deleted.
STR mscVrIpxAdjComponentName	1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxAdjStorageType	1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxAdj tables.
STR mscVrIpxAdjProtocolPortIdentifierIndex	1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.10	AsciiStringIndex	not-accessible	This variable represents an index for the mscVrIpxAdj tables.
STR mscVrIpxAdjNetworkNumberIndex	1.3.6.1.4.1.562.36.2.1.100.7.6.1.1.11	DashedHexString	not-accessible	This variable represents an index for the mscVrIpxAdj tables.
mscVrIpxAdjOperTable	1.3.6.1.4.1.562.36.2.1.100.7.6.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * The Adjacencies operational group.
mscVrIpxAdjOperEntry	1.3.6.1.4.1.562.36.2.1.100.7.6.10.1		not-accessible	An entry in the mscVrIpxAdjOperTable.
PHY mscVrIpxAdjPhysAddress	1.3.6.1.4.1.562.36.2.1.100.7.6.10.1.1	PhysAddress	read-only	The physical address of the adjacent router.
INT mscVrIpxAdjAdjacencyState	1.3.6.1.4.1.562.36.2.1.100.7.6.10.1.2	INTEGER	read-only	The state of the connection to the adjacent router.
mscVrIpxNs	1.3.6.1.4.1.562.36.2.1.100.7.7
mscVrIpxNsRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.7.1		not-accessible	This entry controls the addition and deletion of mscVrIpxNs components.
mscVrIpxNsRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.7.1.1		not-accessible	A single entry in the table represents a single mscVrIpxNs component.
ROW mscVrIpxNsRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpxNs components. These components can be added and deleted.
STR mscVrIpxNsComponentName	1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxNsStorageType	1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxNs tables.
NON mscVrIpxNsIndex	1.3.6.1.4.1.562.36.2.1.100.7.7.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscVrIpxNs tables.
mscVrIpxNsNetSentryApp	1.3.6.1.4.1.562.36.2.1.100.7.7.2
mscVrIpxNsNetSentryAppRowStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.7.2.1		not-accessible	This entry controls the addition and deletion of mscVrIpxNsNetSentryApp components.
mscVrIpxNsNetSentryAppRowStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1		not-accessible	A single entry in the table represents a single mscVrIpxNsNetSentryApp component.
ROW mscVrIpxNsNetSentryAppRowStatus	1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscVrIpxNsNetSentryApp components. These components can be added and deleted.
STR mscVrIpxNsNetSentryAppComponentName	1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscVrIpxNsNetSentryAppStorageType	1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscVrIpxNsNetSentryApp tables.
I32 mscVrIpxNsNetSentryAppEntryIndex	1.3.6.1.4.1.562.36.2.1.100.7.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscVrIpxNsNetSentryApp tables.
mscVrIpxNsNetSentryAppProvTable	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10		not-accessible	The Provisionable group for the IpxNetSentryApplyList.
mscVrIpxNsNetSentryAppProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1		not-accessible	An entry in the mscVrIpxNsNetSentryAppProvTable.
STR mscVrIpxNsNetSentryAppFilter	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.1	AsciiString	read-write	The name of the filter to be applied to packets matching the conditions in this entry of the IpxNetSentryApplyList.
STR mscVrIpxNsNetSentryAppNetworkNumber1	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.2	AsciiString	read-write	The first IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks.
STR mscVrIpxNsNetSentryAppNode1	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.3	AsciiString	read-write	This attribute is the first IPX node address used to compare. This node number can be entered either as a dashed hex string or a string of hex digits. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes.
INT mscVrIpxNsNetSentryAppDirection	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.4	INTEGER	read-write	Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction).
STR mscVrIpxNsNetSentryAppNetworkNumber2	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.5	AsciiString	read-write	The second IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks.
STR mscVrIpxNsNetSentryAppNode2	1.3.6.1.4.1.562.36.2.1.100.7.7.2.10.1.6	AsciiString	read-write	This attribute is the second IPX node address used to compared. This node can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes.
mscVrIpxNsProvTable	1.3.6.1.4.1.562.36.2.1.100.7.7.10		not-accessible	The provisionable attribute group for the IpxNetSentry component.
mscVrIpxNsProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.7.10.1		not-accessible	An entry in the mscVrIpxNsProvTable.
STR mscVrIpxNsFirstFilter	1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.1	AsciiString	read-write	First NetSentry filter for Ipx. If specified this filter is applied before any other NetSentry filters applicable to the packet.
STR mscVrIpxNsLastFilter	1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.2	AsciiString	read-write	Last filter for Ipx. If specified this filter is applied after all other NetSentry filters applicable to the packet.
STR mscVrIpxNsLocalInFilter	1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.3	AsciiString	read-write	The filter name of the NetSentry filter to be applied at the Local In filter point.
STR mscVrIpxNsLocalOutFilter	1.3.6.1.4.1.562.36.2.1.100.7.7.10.1.4	AsciiString	read-write	The filter name of the NetSentry filter to be applied at the Local Out filter point.
mscVrIpxAdminControlTable	1.3.6.1.4.1.562.36.2.1.100.7.100		not-accessible	This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
mscVrIpxAdminControlEntry	1.3.6.1.4.1.562.36.2.1.100.7.100.1		not-accessible	An entry in the mscVrIpxAdminControlTable.
INT mscVrIpxSnmpAdminStatus	1.3.6.1.4.1.562.36.2.1.100.7.100.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
mscVrIpxProvTable	1.3.6.1.4.1.562.36.2.1.100.7.101		not-accessible	IPX system provisionable attributes.
mscVrIpxProvEntry	1.3.6.1.4.1.562.36.2.1.100.7.101.1		not-accessible	An entry in the mscVrIpxProvTable.
STR mscVrIpxNetworkNumber	1.3.6.1.4.1.562.36.2.1.100.7.101.1.1	DashedHexString	read-write	This attribute indicates the internal network number portion of the IPX address. This network number must be unique within the internetwork and is necessary to determine master/slave relationships during IPXWAN negotiations.
U32 mscVrIpxMaxPathSplits	1.3.6.1.4.1.562.36.2.1.100.7.101.1.2	Unsigned32	read-write	This attribute indicates the maximum number of paths with equal routing metric value which this instance of IPX may split between when forwarding packets.
U32 mscVrIpxMaxHops	1.3.6.1.4.1.562.36.2.1.100.7.101.1.3	Unsigned32	read-write	This attribute indicates the maximum number of hops a packet may take.
U32 mscVrIpxRipUpdateInterval	1.3.6.1.4.1.562.36.2.1.100.7.101.1.4	Unsigned32	read-write	The RIP periodic update interval, in seconds.
U32 mscVrIpxSapUpdateInterval	1.3.6.1.4.1.562.36.2.1.100.7.101.1.5	Unsigned32	read-write	The SAP periodic update interval, in seconds.
U32 mscVrIpxControlDelay	1.3.6.1.4.1.562.36.2.1.100.7.101.1.6	Unsigned32	read-write	The delay, in microsecs, between receiving a request from a client and sending a response. This router is significantly faster than some Ipx clients. If a problem is being experienced between a router and an Ipx client, it might be resolved by changing the controlDelay.
U32 mscVrIpxUpdateDelay	1.3.6.1.4.1.562.36.2.1.100.7.101.1.7	Unsigned32	read-write	The delay, in milliseconds, between sending consecutive (RIP and/or SAP) packets. 55 milliseconds is the minimum specified in the Ipx Router Specification.
U32 mscVrIpxRipAgeMultiplier	1.3.6.1.4.1.562.36.2.1.100.7.101.1.8	Unsigned32	read-write	After this many Rip Update intervals unrefreshed Rip information is considered expired.
U32 mscVrIpxSapAgeMultiplier	1.3.6.1.4.1.562.36.2.1.100.7.101.1.9	Unsigned32	read-write	After this many SAP Update intervals unrefreshed SAP information is considered expired.
INT mscVrIpxDamping	1.3.6.1.4.1.562.36.2.1.100.7.101.1.10	INTEGER	read-write	This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch will reply to all requests with no check for rogue nodes.With damping set to enabled, the switch will not reply to a request if the same node made more than the allowable number of requests within 10 seconds. The maximum number of requests to damp at is specified by the following provisionable attributes: ripMaxDampedGeneralRequest, ripMaxDampedSpecificRequests, sapMaxDampedGeneralRequests, sapMaxDampedSpecificRequests.
U32 mscVrIpxRipMaxDampedGeneralRequests	1.3.6.1.4.1.562.36.2.1.100.7.101.1.11	Unsigned32	read-write	This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedGeneralRequests are responded to and the remainder are ignored.
U32 mscVrIpxRipMaxDampedSpecificRequests	1.3.6.1.4.1.562.36.2.1.100.7.101.1.12	Unsigned32	read-write	This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedSpecificRequests are responded to and the remainder are ignored.
U32 mscVrIpxSapMaxDampedGeneralRequests	1.3.6.1.4.1.562.36.2.1.100.7.101.1.13	Unsigned32	read-write	This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedGeneralRequests are responded to and the remainder are ignored.
U32 mscVrIpxSapMaxDampedSpecificRequests	1.3.6.1.4.1.562.36.2.1.100.7.101.1.14	Unsigned32	read-write	This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedSpecificRequests are responded to and the remainder are ignored.
INT mscVrIpxInitialGeneralRequests	1.3.6.1.4.1.562.36.2.1.100.7.101.1.15	INTEGER	read-write	This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be made. This attribute may be disabled in order to avoid the traffic resulting within the network from these initial requests and the ensuing responses. With the initial request disabled, the switch will learn about other network segments off of the IPX ports via the periodic broadcasts which are received on those port.
U32 mscVrIpxHoldDownInterval	1.3.6.1.4.1.562.36.2.1.100.7.101.1.16	Unsigned32	read-write	This attribute specifies an interval, after a network is removed from the route table, during which other incoming route updates for the same network will be ignored. The use of this interval prevents the slow convergence which results when switches that receive late network down broadcasts advertise false routes.
mscVrIpxStateTable	1.3.6.1.4.1.562.36.2.1.100.7.103		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscVrIpxStateEntry	1.3.6.1.4.1.562.36.2.1.100.7.103.1		not-accessible	An entry in the mscVrIpxStateTable.
INT mscVrIpxAdminState	1.3.6.1.4.1.562.36.2.1.100.7.103.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscVrIpxOperationalState	1.3.6.1.4.1.562.36.2.1.100.7.103.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscVrIpxUsageState	1.3.6.1.4.1.562.36.2.1.100.7.103.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscVrIpxOperStatusTable	1.3.6.1.4.1.562.36.2.1.100.7.104		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscVrIpxOperStatusEntry	1.3.6.1.4.1.562.36.2.1.100.7.104.1		not-accessible	An entry in the mscVrIpxOperStatusTable.
INT mscVrIpxSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.100.7.104.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscVrIpxOperTable	1.3.6.1.4.1.562.36.2.1.100.7.105		not-accessible	This group contains IPX related operational attributes.
mscVrIpxOperEntry	1.3.6.1.4.1.562.36.2.1.100.7.105.1		not-accessible	An entry in the mscVrIpxOperTable.
U32 mscVrIpxProtocolPortCount	1.3.6.1.4.1.562.36.2.1.100.7.105.1.1	Unsigned32	read-only	The number of portsknown to this instance of Ipx.
U32 mscVrIpxDestinationCount	1.3.6.1.4.1.562.36.2.1.100.7.105.1.2	Unsigned32	read-only	The number of currently reachable destinations known to Ipx.
U32 mscVrIpxServicesCount	1.3.6.1.4.1.562.36.2.1.100.7.105.1.3	Unsigned32	read-only	The number of Services known to Ipx.
mscVrIpxStatsTable	1.3.6.1.4.1.562.36.2.1.100.7.107		not-accessible	This group contains IPX related statistics on the CP.
mscVrIpxStatsEntry	1.3.6.1.4.1.562.36.2.1.100.7.107.1		not-accessible	An entry in the mscVrIpxStatsTable.
C32 mscVrIpxInReceives	1.3.6.1.4.1.562.36.2.1.100.7.107.1.1	Counter32	read-only	This attribute counts the total number of IPX packets received, including those received in error. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInHeaderErrors	1.3.6.1.4.1.562.36.2.1.100.7.107.1.2	Counter32	read-only	The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInUnknownSocket	1.3.6.1.4.1.562.36.2.1.100.7.107.1.3	Counter32	read-only	The number of IPX packets discarded because the destination socket was not open. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInDiscards	1.3.6.1.4.1.562.36.2.1.100.7.107.1.4	Counter32	read-only	Number of packets received but discarded due to reasons other than those accounted for by inHeaderErrors and inUnknownSocket. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInBadChecksums	1.3.6.1.4.1.562.36.2.1.100.7.107.1.5	Counter32	read-only	Number of packets received with incorrect checksums. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInDelivers	1.3.6.1.4.1.562.36.2.1.100.7.107.1.6	Counter32	read-only	Number of IPX packets delivered locally, including packets from local applications. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxNoRoutes	1.3.6.1.4.1.562.36.2.1.100.7.107.1.7	Counter32	read-only	Number of times no route to a destination was found. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxOutRequests	1.3.6.1.4.1.562.36.2.1.100.7.107.1.8	Counter32	read-only	The number of IPX packets supplied locally for transmission, not including any packets counted in the forwarded attribute. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxOutMalformedRequests	1.3.6.1.4.1.562.36.2.1.100.7.107.1.9	Counter32	read-only	Number of outgoing packets supplied locally that contained errors in their structure. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxOutDiscards	1.3.6.1.4.1.562.36.2.1.100.7.107.1.10	Counter32	read-only	The number of outgoing IPX packets discarded due to reasons other than those accounted for in outMalformedRequests or outFiltered. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxOutPackets	1.3.6.1.4.1.562.36.2.1.100.7.107.1.11	Counter32	read-only	The total number of IPX packets transmitted. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInTooManyHops	1.3.6.1.4.1.562.36.2.1.100.7.107.1.12	Counter32	read-only	Number of packets discarded due to exceeding the maxHops value. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInFiltered	1.3.6.1.4.1.562.36.2.1.100.7.107.1.13	Counter32	read-only	The number of incoming IPX packets discarded due to filtering. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxInNetBIOS	1.3.6.1.4.1.562.36.2.1.100.7.107.1.14	Counter32	read-only	The number of NetBIOS packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxForwarded	1.3.6.1.4.1.562.36.2.1.100.7.107.1.15	Counter32	read-only	The number of IPX packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.
C32 mscVrIpxOutFiltered	1.3.6.1.4.1.562.36.2.1.100.7.107.1.16	Counter32	read-only	The number of outgoing packets discarded due to filtering. This also includes the number of forwarded packets filtered. This counter wraps around to zero after reaching the maximum value of 4294967295.
ipxMIB	1.3.6.1.4.1.562.36.2.2.28
ipxGroup	1.3.6.1.4.1.562.36.2.2.28.1
ipxGroupCA	1.3.6.1.4.1.562.36.2.2.28.1.1
ipxGroupCA02	1.3.6.1.4.1.562.36.2.2.28.1.1.3
ipxGroupCA02A	1.3.6.1.4.1.562.36.2.2.28.1.1.3.2
ipxCapabilities	1.3.6.1.4.1.562.36.2.2.28.3
ipxCapabilitiesCA	1.3.6.1.4.1.562.36.2.2.28.3.1
ipxCapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.28.3.1.3
ipxCapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.28.3.1.3.2

RFC description

Nortel MsCarrier MscPassport IPX protocol-specific management information for virtual routers.

Start monitoring Nortel Networks Magellan Passport switch (virtual-router IPX) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-MsCarrier-MscPassport-IpxMIB

What Is Nortel-MsCarrier-MscPassport-IpxMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description