Nortel-MsCarrier-MscPassport-IpxMIB :: mscVrIpxRipRFltrPort

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-IpxMIB › mscVrIpxRipRFltrPort

mscVrIpxRipRFltrPort

Module: Nortel-MsCarrier-MscPassport-IpxMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrPort

OID (numeric): 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and will be ignored if the filter is applied in the input direction. This attribute is entered as an ascii string and must correspond to a name of a provisioned protocol port. A port name preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for those learned on this port. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.

What is mscVrIpxRipRFltrPort?

Names the protocol port whose learned routes a RIP filter matches; only meaningful for filters applied in the output direction, and a leading caret (^) negates the match.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrPort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5.1 s <value>

Start monitoring Nortel Networks Magellan Passport switch (virtual-router IPX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrPort OID value, configure state conditions and alerts, and monitor any Nortel Networks Magellan Passport switch (virtual-router IPX) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.100mscVrNortel-MsCarrier-MscPassport-VirtualRouterMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.100.7mscVrIpxNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2mscVrIpxRipNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2mscVrIpxRipRFltrNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2.10mscVrIpxRipRFltrProvTableNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1mscVrIpxRipRFltrProvEntryNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.5mscVrIpxRipRFltrPortNortel-MsCarrier-MscPassport-IpxMIB