Nortel-MsCarrier-MscPassport-IpxMIB :: mscVrIpxInitialGeneralRequests

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-IpxMIB › mscVrIpxInitialGeneralRequests

mscVrIpxInitialGeneralRequests

Module: Nortel-MsCarrier-MscPassport-IpxMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxInitialGeneralRequests

OID (numeric): 1.3.6.1.4.1.562.36.2.1.100.7.101.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be made. This attribute may be disabled in order to avoid the traffic resulting within the network from these initial requests and the ensuing responses. With the initial request disabled, the switch will learn about other network segments off of the IPX ports via the periodic broadcasts which are received on those port.

What is mscVrIpxInitialGeneralRequests?

Controls whether RIP and SAP general request broadcasts are sent out a port as soon as it comes up; disabling this avoids the burst of network traffic those initial requests and their responses generate, relying instead on periodic broadcasts to learn routes. Defaults to enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.7.101.1.15
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxInitialGeneralRequests

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.7.101.1.15.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxInitialGeneralRequests.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.100.7.101.1.15.1 i <value>

Start monitoring Nortel Networks Magellan Passport switch (virtual-router IPX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxInitialGeneralRequests OID value, configure state conditions and alerts, and monitor any Nortel Networks Magellan Passport switch (virtual-router IPX) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.100mscVrNortel-MsCarrier-MscPassport-VirtualRouterMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.100.7mscVrIpxNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.101mscVrIpxProvTableNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.101.1mscVrIpxProvEntryNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.101.1.15mscVrIpxInitialGeneralRequestsNortel-MsCarrier-MscPassport-IpxMIB