Nortel-MsCarrier-MscPassport-IpxMIB :: mscVrIpxRipRFltrHops

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-IpxMIB › mscVrIpxRipRFltrHops

mscVrIpxRipRFltrHops

Module: Nortel-MsCarrier-MscPassport-IpxMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrHops

OID (numeric): 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, smaller or greater distance, respectively, away from the switch than the hops value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The number of hops is specified as a decimal number between 0 and 999.

What is mscVrIpxRipRFltrHops?

Specifies the hop-count distance (0-999), optionally prefixed with =, <, or >, that a RIP filter matches against; networks that distance away are filtered or passed depending on the filter's disposition.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrHops

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrHops.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1.1 s <value>

Start monitoring Nortel Networks Magellan Passport switch (virtual-router IPX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-IpxMIB::mscVrIpxRipRFltrHops OID value, configure state conditions and alerts, and monitor any Nortel Networks Magellan Passport switch (virtual-router IPX) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.100mscVrNortel-MsCarrier-MscPassport-VirtualRouterMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.100.7mscVrIpxNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2mscVrIpxRipNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2mscVrIpxRipRFltrNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2.10mscVrIpxRipRFltrProvTableNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1mscVrIpxRipRFltrProvEntryNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.7.2.2.10.1.1mscVrIpxRipRFltrHopsNortel-MsCarrier-MscPassport-IpxMIB