Nortel-MsCarrier-MscPassport-IpxMIB :: mscVrPpIpxPSourceRouteEndStationSupport

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-IpxMIB › mscVrPpIpxPSourceRouteEndStationSupport

mscVrPpIpxPSourceRouteEndStationSupport

Module: Nortel-MsCarrier-MscPassport-IpxMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-IpxMIB::mscVrPpIpxPSourceRouteEndStationSupport

OID (numeric): 1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component.

What is mscVrPpIpxPSourceRouteEndStationSupport?

Enables or disables Source Route End Station (Sres) support on this IPX protocol port; enabling it requires a corresponding Sres component under the virtual router and, on Token Ring/FDDI ports, a linked LanApplication. Defaults to disable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrPpIpxPSourceRouteEndStationSupport

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-IpxMIB::mscVrPpIpxPSourceRouteEndStationSupport.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1.1 i <value>

Start monitoring Nortel Networks Magellan Passport switch (virtual-router IPX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-IpxMIB::mscVrPpIpxPSourceRouteEndStationSupport OID value, configure state conditions and alerts, and monitor any Nortel Networks Magellan Passport switch (virtual-router IPX) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.100mscVrNortel-MsCarrier-MscPassport-VirtualRouterMIB
1.3.6.1.4.1.562.36.2.1.100.3mscVrPpNortel-MsCarrier-MscPassport-VirtualRouterMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.100.3.6mscVrPpIpxPNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.3.6.102mscVrPpIpxPSresProvTableNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.3.6.102.1mscVrPpIpxPSresProvEntryNortel-MsCarrier-MscPassport-IpxMIB
1.3.6.1.4.1.562.36.2.1.100.3.6.102.1.1mscVrPpIpxPSourceRouteEndStationSupportNortel-MsCarrier-MscPassport-IpxMIB