| OID symbolic | OID numeric | Type | Access | Description |
|---|
| mscHg | 1.3.6.1.4.1.562.36.2.1.131 | | | |
| mscHgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.131.1 | | not-accessible | This entry controls the addition and deletion of
mscHg components. |
| mscHgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.131.1.1 | | not-accessible | A single entry in the table represents a single
mscHg component. |
| ROW mscHgRowStatus | 1.3.6.1.4.1.562.36.2.1.131.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of
mscHg components.
These components can be added and deleted. |
| STR mscHgComponentName | 1.3.6.1.4.1.562.36.2.1.131.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO mscHgStorageType | 1.3.6.1.4.1.562.36.2.1.131.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
mscHg tables. |
| I32 mscHgIndex | 1.3.6.1.4.1.562.36.2.1.131.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscHg tables. |
| mscHgHgM | 1.3.6.1.4.1.562.36.2.1.131.2 | | | |
| mscHgHgMRowStatusTable | 1.3.6.1.4.1.562.36.2.1.131.2.1 | | not-accessible | This entry controls the addition and deletion of
mscHgHgM components. |
| mscHgHgMRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.131.2.1.1 | | not-accessible | A single entry in the table represents a single
mscHgHgM component. |
| ROW mscHgHgMRowStatus | 1.3.6.1.4.1.562.36.2.1.131.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of
mscHgHgM components.
These components can be added and deleted. |
| STR mscHgHgMComponentName | 1.3.6.1.4.1.562.36.2.1.131.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO mscHgHgMStorageType | 1.3.6.1.4.1.562.36.2.1.131.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
mscHgHgM tables. |
| I32 mscHgHgMIndex | 1.3.6.1.4.1.562.36.2.1.131.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscHgHgM tables. |
| mscHgHgMProvTable | 1.3.6.1.4.1.562.36.2.1.131.2.10 | | not-accessible | The Provisioned group contains the provisioned attributes of the
hunt group member. |
| mscHgHgMProvEntry | 1.3.6.1.4.1.562.36.2.1.131.2.10.1 | | not-accessible | An entry in the mscHgHgMProvTable. |
| STR mscHgHgMAddress | 1.3.6.1.4.1.562.36.2.1.131.2.10.1.1 | AsciiString | read-write | The address attribute specifies the numbering plan and digits which
form a unique DNA identifier of the hunt group member. The
format of the address attribute is . where
numbering plan is x for X.121 and e for E.164. An example X.121
address is x.12345678. |
| mscHgHgMStateTable | 1.3.6.1.4.1.562.36.2.1.131.2.11 | | not-accessible | This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| mscHgHgMStateEntry | 1.3.6.1.4.1.562.36.2.1.131.2.11.1 | | not-accessible | An entry in the mscHgHgMStateTable. |
| INT mscHgHgMAdminState | 1.3.6.1.4.1.562.36.2.1.131.2.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| INT mscHgHgMOperationalState | 1.3.6.1.4.1.562.36.2.1.131.2.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| INT mscHgHgMUsageState | 1.3.6.1.4.1.562.36.2.1.131.2.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| mscHgHgMOperationalTable | 1.3.6.1.4.1.562.36.2.1.131.2.12 | | not-accessible | The Operational group defines operational attributes associated
with the HuntGroupMember component. |
| mscHgHgMOperationalEntry | 1.3.6.1.4.1.562.36.2.1.131.2.12.1 | | not-accessible | An entry in the mscHgHgMOperationalTable. |
| U32 mscHgHgMAvailability | 1.3.6.1.4.1.562.36.2.1.131.2.12.1.1 | Unsigned32 | read-write | This attribute indicates the current availability of the member.
The higher the value, the more available the member is perceived to
be. A value of 0 indicates the member is unavailable.
A member must be considered 'available' by the hunt group in
order to receive a call, regardless of the selection policy in use. The
hunt group members report whether or not they are available to
receive calls to the hunt group. Some services base their availability
on unused logical channels, others on bandwidth or memory
capacity.
During initialization, the hunt group assumes all of its members are
equally available and sets their availability value to the maximum
of 4095. Similarly, a new hunt group member added to an existing
hunt group has its availability value initialized to 4095. This
ensures that members which have not reported their availability to
the hunt group are tried in order to trigger the member to report its
true availability.
The availability of a member can change in the following ways:
- Hunt group members can report their availability to the hunt group
using a DPRS availability packet.
- A network operator can temporarily change the value by the Set
command. This change remains in effect until changed again by any
of these ways.
- The hunt group resets a member's availability to the maximum of
4095 if it has been 0 for at least 2.5 hours. This ensures that 'lost'
availability information does not prevent a member from returning
to service. |
| C32 mscHgHgMAvailabilityUpdates | 1.3.6.1.4.1.562.36.2.1.131.2.12.1.2 | Counter32 | read-only | This attribute counts the number of availability update packets
received by the hunt group member. This counter wraps to 0 when it
exceeds its maximum value. |
| C32 mscHgHgMCallsRefused | 1.3.6.1.4.1.562.36.2.1.131.2.12.1.3 | Counter32 | read-only | This attribute counts the number of call packets which were
returned to the hunt group by the member because it could not
connect the call. If this counter increments frequently, it could
indicate a problem with the member's reporting of its availability to
the hunt group or an incompatibility in the call options. This
counter wraps to 0 when it exceeds its maximum value. |
| mscHgCidDataTable | 1.3.6.1.4.1.562.36.2.1.131.10 | | not-accessible | This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| mscHgCidDataEntry | 1.3.6.1.4.1.562.36.2.1.131.10.1 | | not-accessible | An entry in the mscHgCidDataTable. |
| U32 mscHgCustomerIdentifier | 1.3.6.1.4.1.562.36.2.1.131.10.1.1 | Unsigned32 | read-write | This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| mscHgNsapAddressTable | 1.3.6.1.4.1.562.36.2.1.131.11 | | not-accessible | This group contains attributes common to all NSAP format
addresses. |
| mscHgNsapAddressEntry | 1.3.6.1.4.1.562.36.2.1.131.11.1 | | not-accessible | An entry in the mscHgNsapAddressTable. |
| STR mscHgAddress | 1.3.6.1.4.1.562.36.2.1.131.11.1.1 | AsciiString | read-write | The address attribute specifies the numbering plan and digits which
form a unique DNA identifier of the hunt group. The format of the
address attribute is . where numbering
plan is x for X.121 and e for E.164. An example X.121 address is
x.12345678. |
| mscHgProvTable | 1.3.6.1.4.1.562.36.2.1.131.12 | | not-accessible | The Provisioned group contains the provisioned attributes of the
hunt group. |
| mscHgProvEntry | 1.3.6.1.4.1.562.36.2.1.131.12.1 | | not-accessible | An entry in the mscHgProvTable. |
| LIN mscHgLogicalProcessor | 1.3.6.1.4.1.562.36.2.1.131.12.1.1 | Link | read-write | This attribute specifies the logical processor on which the hunt
group process will execute. The Lp/n Eng Hgs component contains
statistics for all hunt groups on the LP. |
| INT mscHgSelectionPolicy | 1.3.6.1.4.1.562.36.2.1.131.12.1.2 | INTEGER | read-write | The selectionPolicy attribute specifies the algorithm used to select a
hunt group member.
A value of startFromZero means that on a new call, the first
available member starting from the member with the lowest
instance value is selected. Subsequent hunts for the same call select
the first available member starting from the previously chosen
member. This algorithm is used when it is desirable to have the first
member receive the majority of the calls and subsequent members
only receive calls in overflow situations.
A value of rotary means that on a new call, the first available
member is selected starting from the member which received the
last new call. Subsequent hunts for the same call select the first
available member starting from the previously chosen member. This
algorithm is used when it is desirable to loadspread the calls equally
across the members.
A value of mostAvailable means that on a new call, the most
available member is selected based on the availability information
received from the member. Subsequent hunts for the same call
select the most available member starting from the previously
chosen member. This algorithm is used when it is desirable to send
each call to the member which has the highest probability of
connecting it. |
| U32 mscHgMaxHuntAttempts | 1.3.6.1.4.1.562.36.2.1.131.12.1.3 | Unsigned32 | read-write | The maxHuntAttempts attribute specifies the maximum attempts
allowed to hunt the call. Hunting ceases if either this maximum is
exceeded or the member list is exhausted. |
| INT mscHgAppendSuffixDigits | 1.3.6.1.4.1.562.36.2.1.131.12.1.4 | INTEGER | read-write | The appendSuffixDigits attribute specifies how suffix called address
digits are handled. Suffix called address digits are any trailing
digits, signalled in a call, beyond the provisioned hunt group
address. If this attribute is set to yes, suffix digits are appended to
the member address before the call is forwarded to the member. If it
is set to no, suffix digits are not appended to the member address. |
| mscHgStateTable | 1.3.6.1.4.1.562.36.2.1.131.20 | | not-accessible | This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| mscHgStateEntry | 1.3.6.1.4.1.562.36.2.1.131.20.1 | | not-accessible | An entry in the mscHgStateTable. |
| INT mscHgAdminState | 1.3.6.1.4.1.562.36.2.1.131.20.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| INT mscHgOperationalState | 1.3.6.1.4.1.562.36.2.1.131.20.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| INT mscHgUsageState | 1.3.6.1.4.1.562.36.2.1.131.20.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| mscHgOperationalTable | 1.3.6.1.4.1.562.36.2.1.131.21 | | not-accessible | The Operational group contains the operational attributes of the
hunt group. |
| mscHgOperationalEntry | 1.3.6.1.4.1.562.36.2.1.131.21.1 | | not-accessible | An entry in the mscHgOperationalTable. |
| C32 mscHgHuntAttempts | 1.3.6.1.4.1.562.36.2.1.131.21.1.2 | Counter32 | read-only | This attribute counts the total number of hunt attempts made by the
hunt group. The count includes both initial and subsequent hunt
attempts. This count is contained within the huntAttempts attribute
of the Lp/n Eng Hgs component. This counter wraps to 0 when it
exceeds its maximum value. |
| C32 mscHgFailedCalls | 1.3.6.1.4.1.562.36.2.1.131.21.1.3 | Counter32 | read-only | This attribute counts the number of calls which could not be
connected by any of the hunt group members. This could occur if
the hunt group is locked or has exhausted its member list. If a call
cannot be connected by the hunt group it is sent to call redirection.
This counter wraps to 0 when it exceeds its maximum value. |
| C32 mscHgInitialHuntAttempts | 1.3.6.1.4.1.562.36.2.1.131.21.1.4 | Counter32 | read-only | This attribute counts the number of new (non-hunted) calls received
by the hunt group which are forwarded to a member. This counter
wraps to 0 when it exceeds its maximum value. |
| C32 mscHgAvailabilityUpdates | 1.3.6.1.4.1.562.36.2.1.131.21.1.5 | Counter32 | read-only | This attribute counts the number of availability update packets
received by the hunt group from its members. This counter wraps to
0 when it exceeds its maximum value. |
| C32 mscHgMaxAddrLenExceeded | 1.3.6.1.4.1.562.36.2.1.131.21.1.6 | Counter32 | read-only | This attribute counts the number of times a member could not be
selected to receive a call with suffix address digits because its DNA
length would exceed the maximum of 14 digits with the suffix digits
appended. This counter wraps to 0 when it exceeds its maximum
value. |
| C32 mscHgBadPackets | 1.3.6.1.4.1.562.36.2.1.131.21.1.7 | Counter32 | read-only | This attribute counts the number of unrecognizable packets received
by the hunt group and discarded. This counter wraps to 0 when it
exceeds its maximum value. |
| huntGroupMIB | 1.3.6.1.4.1.562.36.2.2.130 | | | |
| huntGroupGroup | 1.3.6.1.4.1.562.36.2.2.130.1 | | | |
| huntGroupGroupCA | 1.3.6.1.4.1.562.36.2.2.130.1.1 | | | |
| huntGroupGroupCA02 | 1.3.6.1.4.1.562.36.2.2.130.1.1.3 | | | |
| huntGroupGroupCA02A | 1.3.6.1.4.1.562.36.2.2.130.1.1.3.2 | | | |
| huntGroupCapabilities | 1.3.6.1.4.1.562.36.2.2.130.3 | | | |
| huntGroupCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.130.3.1 | | | |
| huntGroupCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.130.3.1.3 | | | |
| huntGroupCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.130.3.1.3.2 | | | |
