MITEL-APPLICATION-MON-MIB

All MIBs › MITEL-APPLICATION-MON-MIB

Organization: MITEL Networks Corporation

Last Updated: 2003--0-3-

Category: Mitel PBX / Telephony, Voice & Telephony

Description: Monitors MITEL Networks application process health and performance metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MITEL-APPLICATION-MON-MIB?

MITEL-APPLICATION-MON-MIB is a Mitel Networks proprietary MIB, part of Mitel's enterprise IP telephony/unified communications product line under the shared "mitel" enterprise registration tree, that monitors the health and performance of Mitel application processes such as call server software. Its object tree is organized under mitelProprietary/mitelIdentification, including identification objects for specific Mitel platforms such as call servers and the Ipera1000 product, indicating it tracks per-application identity alongside runtime monitoring data. This MIB is explicitly aimed at software status monitoring — tracking whether Mitel application processes (e.g., call-processing software) are running correctly, their identification/version, and performance metrics that would reveal degraded call-server behavior. As a Mitel proprietary MIB it depends on Mitel's broader enterprise MIB structure (the shared mitel/mitelProprietary registration subtree used across Mitel products) rather than any IETF standard. It is deployed on Mitel IP telephony call servers and related application servers, such as Ipera1000-based systems, in enterprise unified-communications environments, where MITEL-APPLICATION-MON-MIB SNMP monitoring tracks call-processing software health.

IPNetwork Monitor allows you to monitor SNMP objects defined in MITEL-APPLICATION-MON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Mitel IP telephony call servers
Mitel Ipera1000-based systems

Monitoring Examples

An administrator would poll objects under the mitelIdentification subtree, such as mitelIdCallServers and the specific mitelIdCsIpera1000 entry, to confirm which Mitel call-server application (and version/platform) is running on a given system. Combined with the application monitoring objects implied by the MIB's purpose, this would reveal whether the Ipera1000 call-processing application is correctly identified and active, helping detect a misconfigured or unresponsive call server before it affects call routing.

What Can Be Monitored

call server application identity/version
application process health
call-processing performance metrics
software status of Mitel application processes

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using mitelApplicationMonFaultOccur OID:

Select a Mitel IP telephony call server / Ipera1000-based system (application health) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type mitelApplicationMonFaultOccur into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The mitelApplicationMonFaultOccur indicates the occurence of the fault since the last system restart. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
mitel	1.3.6.1.4.1.1027
mitelIdentification	1.3.6.1.4.1.1027.1
mitelIdCallServers	1.3.6.1.4.1.1027.1.2
mitelIdCsIpera1000	1.3.6.1.4.1.1027.1.2.4
mitelIpera1000Notifications	1.3.6.1.4.1.1027.1.2.4.0			Call Server Ipera 1000 Notifications.
NTF mitelAppMonTaskCrashedNotif	1.3.6.1.4.1.1027.1.2.4.0.411			The mitelAppMonTaskCrashedNotif trap indicates that a task has crashed and a system reboot is imminent.
mitelProprietary	1.3.6.1.4.1.1027.4
mitelApplicationMon	1.3.6.1.4.1.1027.4.11			The Mitel Application Monitor MIB.
mitelApplicationMonFaultTable	1.3.6.1.4.1.1027.4.11.1		not-accessible	The Task Monitor Fault table.
mitelApplicationMonFaultEntry	1.3.6.1.4.1.1027.4.11.1.1		not-accessible	An entry in the mitelApplicationMonFaultTable.
I32 mitelApplicationMonFaultTblIndex	1.3.6.1.4.1.1027.4.11.1.1.1	Integer32	read-only	The index of the fault table.
INT mitelApplicationMonFaultId	1.3.6.1.4.1.1027.4.11.1.1.2	INTEGER	read-only	The mitelApplicationMonFaultId indicates the id of the fault.
INT mitelApplicationMonFaultStatus	1.3.6.1.4.1.1027.4.11.1.1.3	INTEGER	read-only	The mitelApplicationMonFaultStatus indicates whether the fault is set or cleared or transient.
C32 mitelApplicationMonFaultOccurEx	1.3.6.1.4.1.1027.4.11.1.1.4	Counter32	read-only	The mitelApplicationMonFaultOccur indicates the occurence of the fault since the last system restart
DAT mitelApplicationMonFaultDateTime	1.3.6.1.4.1.1027.4.11.1.1.5	DateAndTime	read-only	The mitelApplicationMonFaultOccur indicates the datetime of when the fault was detected.
STR mitelApplicationMonFaultDescr	1.3.6.1.4.1.1027.4.11.1.1.6	DisplayString	read-only	The mitelApplicationMonFaultDescr contains a brief description of the fault.

RFC description

SNMP MIB for monitoring Mitel application platform services and systems, providing management objects for application health, status, and performance monitoring on Mitel devices.

Start monitoring Mitel IP telephony call server / Ipera1000-based system (application health) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MITEL-APPLICATION-MON-MIB