Nortel-MsCarrier-MscPassport-HuntGroupMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs, mscComponents FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB AsciiString, Link FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- HuntGroup Enterprise MIB." huntGroupMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 130 } -- HuntGroup/n -- The HuntGroup component provides a hunt group capability for -- switched calls (SVCs). -- A hunt group is a single DNA used to represent a group of service -- DNAs. A customer calling the DNA of the hunt group receives the -- benefits of higher capacity and availability as calls are spread across -- several lines. mscHg OBJECT IDENTIFIER ::= { mscComponents 131 } mscHgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscHg components." ::= { mscHg 1 } mscHgRowStatusEntry OBJECT-TYPE SYNTAX MscHgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscHg component." INDEX { mscHgIndex } ::= { mscHgRowStatusTable 1 } MscHgRowStatusEntry ::= SEQUENCE { mscHgRowStatus RowStatus, mscHgComponentName DisplayString, mscHgStorageType StorageType, mscHgIndex Integer32 } mscHgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscHg components. These components can be added and deleted." ::= { mscHgRowStatusEntry 1 } mscHgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscHgRowStatusEntry 2 } mscHgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscHg tables." ::= { mscHgRowStatusEntry 4 } mscHgIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscHg tables." ::= { mscHgRowStatusEntry 10 } mscHgCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscHg 10 } mscHgCidDataEntry OBJECT-TYPE SYNTAX MscHgCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgCidDataTable." INDEX { mscHgIndex } ::= { mscHgCidDataTable 1 } MscHgCidDataEntry ::= SEQUENCE { mscHgCustomerIdentifier Unsigned32 } mscHgCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscHgCidDataEntry 1 } mscHgNsapAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgNsapAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes common to all NSAP format addresses." ::= { mscHg 11 } mscHgNsapAddressEntry OBJECT-TYPE SYNTAX MscHgNsapAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgNsapAddressTable." INDEX { mscHgIndex } ::= { mscHgNsapAddressTable 1 } MscHgNsapAddressEntry ::= SEQUENCE { mscHgAddress AsciiString } mscHgAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "The address attribute specifies the numbering plan and digits which form a unique DNA identifier of the hunt group. The format of the address attribute is . where numbering plan is x for X.121 and e for E.164. An example X.121 address is x.12345678." ::= { mscHgNsapAddressEntry 1 } mscHgProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisioned group contains the provisioned attributes of the hunt group." ::= { mscHg 12 } mscHgProvEntry OBJECT-TYPE SYNTAX MscHgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgProvTable." INDEX { mscHgIndex } ::= { mscHgProvTable 1 } MscHgProvEntry ::= SEQUENCE { mscHgLogicalProcessor Link, mscHgSelectionPolicy INTEGER, mscHgMaxHuntAttempts Unsigned32, mscHgAppendSuffixDigits INTEGER } mscHgLogicalProcessor OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the logical processor on which the hunt group process will execute. The Lp/n Eng Hgs component contains statistics for all hunt groups on the LP." ::= { mscHgProvEntry 1 } mscHgSelectionPolicy OBJECT-TYPE SYNTAX INTEGER { startFromZero(0), rotary(1), mostAvailable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The selectionPolicy attribute specifies the algorithm used to select a hunt group member. A value of startFromZero means that on a new call, the first available member starting from the member with the lowest instance value is selected. Subsequent hunts for the same call select the first available member starting from the previously chosen member. This algorithm is used when it is desirable to have the first member receive the majority of the calls and subsequent members only receive calls in overflow situations. A value of rotary means that on a new call, the first available member is selected starting from the member which received the last new call. Subsequent hunts for the same call select the first available member starting from the previously chosen member. This algorithm is used when it is desirable to loadspread the calls equally across the members. A value of mostAvailable means that on a new call, the most available member is selected based on the availability information received from the member. Subsequent hunts for the same call select the most available member starting from the previously chosen member. This algorithm is used when it is desirable to send each call to the member which has the highest probability of connecting it." DEFVAL { mostAvailable } ::= { mscHgProvEntry 2 } mscHgMaxHuntAttempts OBJECT-TYPE SYNTAX Unsigned32 (1..63) ACCESS read-write STATUS mandatory DESCRIPTION "The maxHuntAttempts attribute specifies the maximum attempts allowed to hunt the call. Hunting ceases if either this maximum is exceeded or the member list is exhausted." DEFVAL { 63 } ::= { mscHgProvEntry 3 } mscHgAppendSuffixDigits OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The appendSuffixDigits attribute specifies how suffix called address digits are handled. Suffix called address digits are any trailing digits, signalled in a call, beyond the provisioned hunt group address. If this attribute is set to yes, suffix digits are appended to the member address before the call is forwarded to the member. If it is set to no, suffix digits are not appended to the member address." DEFVAL { yes } ::= { mscHgProvEntry 4 } mscHgStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscHg 20 } mscHgStateEntry OBJECT-TYPE SYNTAX MscHgStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgStateTable." INDEX { mscHgIndex } ::= { mscHgStateTable 1 } MscHgStateEntry ::= SEQUENCE { mscHgAdminState INTEGER, mscHgOperationalState INTEGER, mscHgUsageState INTEGER } mscHgAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscHgStateEntry 1 } mscHgOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscHgStateEntry 2 } mscHgUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscHgStateEntry 3 } mscHgOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Operational group contains the operational attributes of the hunt group." ::= { mscHg 21 } mscHgOperationalEntry OBJECT-TYPE SYNTAX MscHgOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgOperationalTable." INDEX { mscHgIndex } ::= { mscHgOperationalTable 1 } MscHgOperationalEntry ::= SEQUENCE { mscHgHuntAttempts Counter32, mscHgFailedCalls Counter32, mscHgInitialHuntAttempts Counter32, mscHgAvailabilityUpdates Counter32, mscHgMaxAddrLenExceeded Counter32, mscHgBadPackets Counter32 } mscHgHuntAttempts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of hunt attempts made by the hunt group. The count includes both initial and subsequent hunt attempts. This count is contained within the huntAttempts attribute of the Lp/n Eng Hgs component. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgOperationalEntry 2 } mscHgFailedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of calls which could not be connected by any of the hunt group members. This could occur if the hunt group is locked or has exhausted its member list. If a call cannot be connected by the hunt group it is sent to call redirection. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgOperationalEntry 3 } mscHgInitialHuntAttempts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of new (non-hunted) calls received by the hunt group which are forwarded to a member. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgOperationalEntry 4 } mscHgAvailabilityUpdates OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of availability update packets received by the hunt group from its members. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgOperationalEntry 5 } mscHgMaxAddrLenExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a member could not be selected to receive a call with suffix address digits because its DNA length would exceed the maximum of 14 digits with the suffix digits appended. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgOperationalEntry 6 } mscHgBadPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of unrecognizable packets received by the hunt group and discarded. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgOperationalEntry 7 } -- Hg/n HuntGroupMember/n -- The HuntGroupMember component defines an instance of a hunt -- group member. mscHgHgM OBJECT IDENTIFIER ::= { mscHg 2 } mscHgHgMRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgHgMRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscHgHgM components." ::= { mscHgHgM 1 } mscHgHgMRowStatusEntry OBJECT-TYPE SYNTAX MscHgHgMRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscHgHgM component." INDEX { mscHgIndex, mscHgHgMIndex } ::= { mscHgHgMRowStatusTable 1 } MscHgHgMRowStatusEntry ::= SEQUENCE { mscHgHgMRowStatus RowStatus, mscHgHgMComponentName DisplayString, mscHgHgMStorageType StorageType, mscHgHgMIndex Integer32 } mscHgHgMRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscHgHgM components. These components can be added and deleted." ::= { mscHgHgMRowStatusEntry 1 } mscHgHgMComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscHgHgMRowStatusEntry 2 } mscHgHgMStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscHgHgM tables." ::= { mscHgHgMRowStatusEntry 4 } mscHgHgMIndex OBJECT-TYPE SYNTAX Integer32 (1..63) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscHgHgM tables." ::= { mscHgHgMRowStatusEntry 10 } mscHgHgMProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgHgMProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisioned group contains the provisioned attributes of the hunt group member." ::= { mscHgHgM 10 } mscHgHgMProvEntry OBJECT-TYPE SYNTAX MscHgHgMProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgHgMProvTable." INDEX { mscHgIndex, mscHgHgMIndex } ::= { mscHgHgMProvTable 1 } MscHgHgMProvEntry ::= SEQUENCE { mscHgHgMAddress AsciiString } mscHgHgMAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "The address attribute specifies the numbering plan and digits which form a unique DNA identifier of the hunt group member. The format of the address attribute is . where numbering plan is x for X.121 and e for E.164. An example X.121 address is x.12345678." ::= { mscHgHgMProvEntry 1 } mscHgHgMStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgHgMStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscHgHgM 11 } mscHgHgMStateEntry OBJECT-TYPE SYNTAX MscHgHgMStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgHgMStateTable." INDEX { mscHgIndex, mscHgHgMIndex } ::= { mscHgHgMStateTable 1 } MscHgHgMStateEntry ::= SEQUENCE { mscHgHgMAdminState INTEGER, mscHgHgMOperationalState INTEGER, mscHgHgMUsageState INTEGER } mscHgHgMAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscHgHgMStateEntry 1 } mscHgHgMOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscHgHgMStateEntry 2 } mscHgHgMUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscHgHgMStateEntry 3 } mscHgHgMOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF MscHgHgMOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Operational group defines operational attributes associated with the HuntGroupMember component." ::= { mscHgHgM 12 } mscHgHgMOperationalEntry OBJECT-TYPE SYNTAX MscHgHgMOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscHgHgMOperationalTable." INDEX { mscHgIndex, mscHgHgMIndex } ::= { mscHgHgMOperationalTable 1 } MscHgHgMOperationalEntry ::= SEQUENCE { mscHgHgMAvailability Unsigned32, mscHgHgMAvailabilityUpdates Counter32, mscHgHgMCallsRefused Counter32 } mscHgHgMAvailability OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the current availability of the member. The higher the value, the more available the member is perceived to be. A value of 0 indicates the member is unavailable. A member must be considered 'available' by the hunt group in order to receive a call, regardless of the selection policy in use. The hunt group members report whether or not they are available to receive calls to the hunt group. Some services base their availability on unused logical channels, others on bandwidth or memory capacity. During initialization, the hunt group assumes all of its members are equally available and sets their availability value to the maximum of 4095. Similarly, a new hunt group member added to an existing hunt group has its availability value initialized to 4095. This ensures that members which have not reported their availability to the hunt group are tried in order to trigger the member to report its true availability. The availability of a member can change in the following ways: - Hunt group members can report their availability to the hunt group using a DPRS availability packet. - A network operator can temporarily change the value by the Set command. This change remains in effect until changed again by any of these ways. - The hunt group resets a member's availability to the maximum of 4095 if it has been 0 for at least 2.5 hours. This ensures that 'lost' availability information does not prevent a member from returning to service." DEFVAL { 4095 } ::= { mscHgHgMOperationalEntry 1 } mscHgHgMAvailabilityUpdates OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of availability update packets received by the hunt group member. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgHgMOperationalEntry 2 } mscHgHgMCallsRefused OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of call packets which were returned to the hunt group by the member because it could not connect the call. If this counter increments frequently, it could indicate a problem with the member's reporting of its availability to the hunt group or an incompatibility in the call options. This counter wraps to 0 when it exceeds its maximum value." ::= { mscHgHgMOperationalEntry 3 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscHgStorageType, -- mscHgHgMStorageType, -- mscHgHgMAddress, -- mscHgHgMUsageState, -- mscHgMaxAddrLenExceeded, -- mscHgAppendSuffixDigits, -- mscHgUsageState, -- mscHgHgMOperationalState, -- mscHgSelectionPolicy, -- mscHgHgMAvailability, -- mscHgComponentName, -- mscHgMaxHuntAttempts, -- mscHgHgMAdminState, -- mscHgAvailabilityUpdates, -- mscHgOperationalState, -- mscHgAddress, -- mscHgHgMRowStatus, -- mscHgFailedCalls, -- mscHgHuntAttempts, -- mscHgLogicalProcessor, -- mscHgInitialHuntAttempts, -- mscHgAdminState, -- mscHgHgMCallsRefused, -- mscHgHgMAvailabilityUpdates, -- mscHgBadPackets, -- mscHgRowStatus, -- mscHgHgMComponentName, -- mscHgCustomerIdentifier } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." huntGroupGroup OBJECT IDENTIFIER ::= { huntGroupMIB 1 } huntGroupGroupCA OBJECT IDENTIFIER ::= { huntGroupGroup 1 } huntGroupGroupCA02 OBJECT IDENTIFIER ::= { huntGroupGroupCA 3 } huntGroupGroupCA02A OBJECT IDENTIFIER ::= { huntGroupGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 HuntGroup." -- STATUS mandatory -- DESCRIPTION "Carrier Passport HuntGroup MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-HuntGroupMIB -- INCLUDES { huntGroupGroupCA02A } huntGroupCapabilities OBJECT IDENTIFIER ::= { huntGroupMIB 3 } huntGroupCapabilitiesCA OBJECT IDENTIFIER ::= { huntGroupCapabilities 1 } huntGroupCapabilitiesCA02 OBJECT IDENTIFIER ::= { huntGroupCapabilitiesCA 3 } huntGroupCapabilitiesCA02A OBJECT IDENTIFIER ::= { huntGroupCapabilitiesCA02 2 } END