Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB :: mscTraceRcvrFrDnaOutAccess

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB › mscTraceRcvrFrDnaOutAccess

mscTraceRcvrFrDnaOutAccess

Module: Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB::mscTraceRcvrFrDnaOutAccess

OID (numeric): 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature.

What is mscTraceRcvrFrDnaOutAccess?

Controls whether outgoing calls from this closed-user-group Dna can also reach the open (non-CUG) part of the network; an admin sets this to allowed to let the trace receiver call out beyond its own CUG, matching the ITU-T 'CUG with Outgoing Access' feature.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB::mscTraceRcvrFrDnaOutAccess

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB::mscTraceRcvrFrDnaOutAccess.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17.1 i <value>

Start monitoring Nortel MainStreet Carrier / Passport (MscPassport) multiservice switch (Frame Relay trace receiver) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB::mscTraceRcvrFrDnaOutAccess OID value, configure state conditions and alerts, and monitor any Nortel MainStreet Carrier / Passport (MscPassport) multiservice switch (Frame Relay trace receiver) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.106mscTraceNortel-MsCarrier-MscPassport-TraceBaseMIB
1.3.6.1.4.1.562.36.2.1.106.2mscTraceRcvrNortel-MsCarrier-MscPassport-TraceBaseMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.106.2.3mscTraceRcvrFrNortel-MsCarrier-MscPassport-FrTraceRcvrMIB
1.3.6.1.4.1.562.36.2.1.106.2.3.2mscTraceRcvrFrDnaNortel-MsCarrier-MscPassport-FrTraceRcvrMIB
1.3.6.1.4.1.562.36.2.1.106.2.3.2.11mscTraceRcvrFrDnaOutgoingOptionsTableNortel-MsCarrier-MscPassport-FrTraceRcvrMIB
1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1mscTraceRcvrFrDnaOutgoingOptionsEntryNortel-MsCarrier-MscPassport-FrTraceRcvrMIB
1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17mscTraceRcvrFrDnaOutAccessNortel-MsCarrier-MscPassport-FrTraceRcvrMIB