| OID symbolic | OID numeric | Type | Access | Description |
|---|
| mscTrace | 1.3.6.1.4.1.562.36.2.1.106 | | | |
| mscTraceRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.1 | | not-accessible | This entry controls the addition and deletion of
mscTrace components. |
| mscTraceRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.1.1 | | not-accessible | A single entry in the table represents a single
mscTrace component. |
| ROW mscTraceRowStatus | 1.3.6.1.4.1.562.36.2.1.106.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of
mscTrace components.
These components can be added and deleted. |
| STR mscTraceComponentName | 1.3.6.1.4.1.562.36.2.1.106.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO mscTraceStorageType | 1.3.6.1.4.1.562.36.2.1.106.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
mscTrace tables. |
| NON mscTraceIndex | 1.3.6.1.4.1.562.36.2.1.106.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTrace tables. |
| mscTraceRcvr | 1.3.6.1.4.1.562.36.2.1.106.2 | | | |
| mscTraceRcvrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.2.1 | | not-accessible | This entry controls the addition and deletion of
mscTraceRcvr components. |
| mscTraceRcvrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.2.1.1 | | not-accessible | A single entry in the table represents a single
mscTraceRcvr component. |
| ROW mscTraceRcvrRowStatus | 1.3.6.1.4.1.562.36.2.1.106.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of
mscTraceRcvr components.
These components can be added and deleted. |
| STR mscTraceRcvrComponentName | 1.3.6.1.4.1.562.36.2.1.106.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO mscTraceRcvrStorageType | 1.3.6.1.4.1.562.36.2.1.106.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
mscTraceRcvr tables. |
| STR mscTraceRcvrIndex | 1.3.6.1.4.1.562.36.2.1.106.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscTraceRcvr tables. |
| mscTraceSession | 1.3.6.1.4.1.562.36.2.1.106.3 | | | |
| mscTraceSessionRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.3.1 | | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscTraceSession components. |
| mscTraceSessionRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.3.1.1 | | not-accessible | A single entry in the table represents a single
mscTraceSession component. |
| ROW mscTraceSessionRowStatus | 1.3.6.1.4.1.562.36.2.1.106.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of
mscTraceSession components.
These components cannot be added nor deleted. |
| STR mscTraceSessionComponentName | 1.3.6.1.4.1.562.36.2.1.106.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO mscTraceSessionStorageType | 1.3.6.1.4.1.562.36.2.1.106.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
mscTraceSession tables. |
| I32 mscTraceSessionIndex | 1.3.6.1.4.1.562.36.2.1.106.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscTraceSession tables. |
| mscTraceSessionOperationalTable | 1.3.6.1.4.1.562.36.2.1.106.3.100 | | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group provides the operational attributes for the Session
component. It displays the service being traced and the destination
for the traced data. |
| mscTraceSessionOperationalEntry | 1.3.6.1.4.1.562.36.2.1.106.3.100.1 | | not-accessible | An entry in the mscTraceSessionOperationalTable. |
| NUM mscTraceSessionServiceTraced | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.2 | RowPointer | read-only | This attribute identifies the service being traced. An example is
FrUni/5. |
| NUM mscTraceSessionReceiver | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.3 | RowPointer | read-only | This attribute identifies the trace receiver which is the destination
for the traced data. |
| INT mscTraceSessionSessionState | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.4 | INTEGER | read-only | This attribute indicates the state of the trace session.
The active value is the normal state for a running trace session.
The waitingForSession, waitingForProvisioningData,
callingReceiver and binding values are all normal transient states
used to establish a session with the trace receiver on receipt of a
Start command. In the waitingForSession state, a trace session is
being allocated. In the waitingForProvisioningData state, a trace
session has been allocated and receiver provisioning data, used to
setup the call the the receiver, is being retrieved. In the
callingReceiver state, the call to the receiver is being established. In
the binding state, the call to the receiver has been established and
the service data path is being adjusted to include trace.
The unbinding, clearingCallToReceiver and releasingSession
values are all normal transient states used to disconnect a session
with the trace receiver on receipt of a Stop command. In the
unbinding state, the service data path is being adjusted to remove
trace. In the clearingCallToReceiver state, the call to the receiver is
being cleared. In the releasingSession state, a trace session is being
deallocated.
A value of abortingDueToCallFailure indicates that the call to the
trace receiver has disconnected unexpectedly and trace is stopping.
The clear cause and diagnostic for the failure is reported. Correct
the fault indicated and retry the Start command.
Values of initializing and idle can never be seen since these states
occur before a Session component is created and after it is
destroyed. |
| INT mscTraceSessionCallState | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.5 | INTEGER | read-only | This attribute indicates the state of the trace call to the receiver.
The dataTransfer value is the normal state for the call.
The initializing, creatingVc, calling and enteringDataTransfer
values are all normal transient states used to establish a call to the
trace receiver on receipt of a Start command. These states occur
during the callingReceiver state of the sessionState attribute. In the
initializing state, receiver provisioning data, used to setup the call
the the receiver, is being retrieved. In the creatingVc state, the local
VC is being created. In the calling state, the direct call to the
receiver is being connected. In the enteringDataTransfer state, the
call to the receiver has been accepted and the data path is being
established.
The clearing, terminatingVc and terminated values are all normal
transient states used to disconnect a call with the trace receiver on
receipt of a Stop command. These states occur during the
clearingCallToReceiver state of the sessionState attribute. In the
clearing state, the call to the receiver is being cleared. In the
terminatingVc state, the local VC is being destroyed. In the
terminated state, the call is down and all cleanup is complete.
A value of reseting indicates a data sequencing problem has
occured on the call. This value is applicable for sessions to X.25
trace receivers only and indicates an incompatability with the
receiver. Tracing continues, however, some trace data may have
been lost.
A value of terminating is a normal transient state which occurs if a
Stop command is received before the local VC has been created. |
| INT mscTraceSessionQueueState | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.6 | INTEGER | read-only | This attribute indicates the state of the trace queue. A value of
normal indicates that traced data is being queued normally. A value
of full indicates that trace data is being discarded because the queue
is full. A value of blocked indicates that trace data is being
discarded because the trace VC is not able to transport the data. |
| U32 mscTraceSessionFramesQueued | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.7 | Unsigned32 | read-only | This attribute indicates the number of traced frames that are
currently queued to be sent to the VC. |
| U32 mscTraceSessionFramesSent | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.8 | Unsigned32 | read-only | This attribute counts the number of traced frames sent to the VC.
The counter wraps when it exceeds its maximum value. |
| U32 mscTraceSessionFramesDiscarded | 1.3.6.1.4.1.562.36.2.1.106.3.100.1.9 | Unsigned32 | read-only | This attribute counts the number of discarded trace frames while the
trace queue is full. Frames discarded while the queue is blocked are
not counted. The counter wraps when it exceeds its maximum
value.
DESCRIPTION |
| traceBaseMIB | 1.3.6.1.4.1.562.36.2.2.60 | | | |
| traceBaseGroup | 1.3.6.1.4.1.562.36.2.2.60.1 | | | |
| traceBaseGroupCA | 1.3.6.1.4.1.562.36.2.2.60.1.1 | | | |
| traceBaseGroupCA02 | 1.3.6.1.4.1.562.36.2.2.60.1.1.3 | | | |
| traceBaseGroupCA02A | 1.3.6.1.4.1.562.36.2.2.60.1.1.3.2 | | | |
| traceBaseCapabilities | 1.3.6.1.4.1.562.36.2.2.60.3 | | | |
| traceBaseCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.60.3.1 | | | |
| traceBaseCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.60.3.1.3 | | | |
| traceBaseCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.60.3.1.3.2 | | | |
