All MIBs › Nortel-MsCarrier-MscPassport-NetSentryMIB
Category: Nortel MsCarrier MscPassport, Security & Authentication
Description: Defines SNMP objects for NetSentry traffic policing and access filtering on Nortel MsCarrier MscPassport switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-MsCarrier-MscPassport-NetSentryMIB?
Nortel-MsCarrier-MscPassport-NetSentryMIB is a Nortel-proprietary MIB for the MscPassport (Magellan Passport) carrier switching platform, covering the NetSentry feature used for traffic policing and access filtering. It exposes configuration and statistics data for policing/filtering components, including provisioning entries that define drop conditions for traffic violating configured policy, and a statistics table tracking the resulting counts. Its monitoring value centers on traffic-policy enforcement visibility: administrators use it to confirm which filtering/policing rules are provisioned and active (via row status and component naming) and to track how much traffic is being dropped or policed, revealing both attack/abuse traffic and overly aggressive filtering causing legitimate traffic loss. As a legacy Nortel carrier-platform MIB, it has no significant dependency on IETF standard MIBs, operating within Nortel's own MscPassport management framework. It was deployed on Nortel/Bay Networks MscPassport (Passport) carrier switches in service-provider networks, and the Nortel-MsCarrier-MscPassport-NetSentryMIB MIB was what operators relied on to provision and monitor traffic policing and access filtering per virtual router.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-NetSentryMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel/Bay Networks MscPassport (Magellan Passport) carrier switch
Monitoring Examples
An administrator would check mscVrNsRowStatusTable/mscVrNsRowStatusEntry, keyed by mscVrNsIndex and mscVrNsComponentName, to confirm a given NetSentry filtering component is active (mscVrNsRowStatus). The mscVrNsProvTable/mscVrNsProvEntry with mscVrNsDropConditions defines what traffic conditions trigger a drop, and mscVrNsStatsTable/mscVrNsStatsEntry provides the resulting drop/match counters. A sharp rise in drop statistics for a given component would indicate either an active attack being filtered as intended, or an overly strict drop condition inadvertently blocking legitimate traffic.
What Can Be Monitored
- NetSentry filtering component status
- provisioned drop conditions
- traffic drop/match statistics
- per-virtual-router filtering configuration
This MIB depends on
Related MIBs
Imported Objects
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Integer32 | |
| RowStatus | |
| StorageType |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiString | |
| AsciiStringIndex | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscPassportMIBs | OBJECT-IDENTITY |
From Nortel-MsCarrier-MscPassport-VirtualRouterMIB
| mscVr | OBJECT-IDENTITY |
| mscVrIndex | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mscVrNs | 1.3.6.1.4.1.562.36.2.1.100.4 | |||
| mscVrNsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.1 | not-accessible | This entry controls the addition and deletion of mscVrNs components. | |
| mscVrNsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.1.1 | not-accessible | A single entry in the table represents a single mscVrNs component. | |
| ROW mscVrNsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNs components. These components can be added and deleted. |
| STR mscVrNsComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNs tables. |
| NON mscVrNsIndex | 1.3.6.1.4.1.562.36.2.1.100.4.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrNs tables. |
| mscVrNsFile | 1.3.6.1.4.1.562.36.2.1.100.4.2 | |||
| mscVrNsFileRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.2.1 | not-accessible | This entry controls the addition and deletion of mscVrNsFile components. | |
| mscVrNsFileRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.2.1.1 | not-accessible | A single entry in the table represents a single mscVrNsFile component. | |
| ROW mscVrNsFileRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsFile components. These components can be added and deleted. |
| STR mscVrNsFileComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsFileStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsFile tables. |
| STR mscVrNsFileIndex | 1.3.6.1.4.1.562.36.2.1.100.4.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscVrNsFile tables. |
| mscVrNsFileOperTable | 1.3.6.1.4.1.562.36.2.1.100.4.2.10 | not-accessible | This holds hold a single compiler error message. | |
| mscVrNsFileOperEntry | 1.3.6.1.4.1.562.36.2.1.100.4.2.10.1 | not-accessible | An entry in the mscVrNsFileOperTable. | |
| STR mscVrNsFileCompilerErrorMsg | 1.3.6.1.4.1.562.36.2.1.100.4.2.10.1.1 | AsciiString | read-only | This attribute contains a single string holding the compiler error which caused the compile to fail. In the event that the file is recompiled (using the RELoad verb), the value of this will change, to reflect the new error, if any was encountered, or no error, if the compile was successful. |
| mscVrNsEngine | 1.3.6.1.4.1.562.36.2.1.100.4.3 | |||
| mscVrNsEngineRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.3.1 | not-accessible | This entry controls the addition and deletion of mscVrNsEngine components. | |
| mscVrNsEngineRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.3.1.1 | not-accessible | A single entry in the table represents a single mscVrNsEngine component. | |
| ROW mscVrNsEngineRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsEngine components. These components can be added and deleted. |
| STR mscVrNsEngineComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsEngineStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsEngine tables. |
| I32 mscVrNsEngineIndex | 1.3.6.1.4.1.562.36.2.1.100.4.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrNsEngine tables. |
| mscVrNsIPStats | 1.3.6.1.4.1.562.36.2.1.100.4.4 | |||
| mscVrNsIPStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.4.1 | not-accessible | This entry controls the addition and deletion of mscVrNsIPStats components. | |
| mscVrNsIPStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.4.1.1 | not-accessible | A single entry in the table represents a single mscVrNsIPStats component. | |
| ROW mscVrNsIPStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsIPStats components. These components can be added and deleted. |
| STR mscVrNsIPStatsComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsIPStatsStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsIPStats tables. |
| NON mscVrNsIPStatsIndex | 1.3.6.1.4.1.562.36.2.1.100.4.4.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrNsIPStats tables. |
| mscVrNsIPStatsAddrStat | 1.3.6.1.4.1.562.36.2.1.100.4.4.2 | |||
| mscVrNsIPStatsAddrStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrNsIPStatsAddrStat components. | |
| mscVrNsIPStatsAddrStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1.1 | not-accessible | A single entry in the table represents a single mscVrNsIPStatsAddrStat component. | |
| ROW mscVrNsIPStatsAddrStatRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrNsIPStatsAddrStat components. These components cannot be added nor deleted. |
| STR mscVrNsIPStatsAddrStatComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsIPStatsAddrStatStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsIPStatsAddrStat tables. |
| STR mscVrNsIPStatsAddrStatSourceAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsIPStatsAddrStat tables. |
| STR mscVrNsIPStatsAddrStatDestinationAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.1.1.11 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsIPStatsAddrStat tables. |
| mscVrNsIPStatsAddrStatStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This is the basic statistic used throughout NetSentry by-protocol statistics gathering. It contains counters for total packets, total octets in packets, and two user counters, counter_1 and counter_2. | |
| mscVrNsIPStatsAddrStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.10.1 | not-accessible | An entry in the mscVrNsIPStatsAddrStatStatsTable. | |
| C32 mscVrNsIPStatsAddrStatPacketCount | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.10.1.1 | Counter32 | read-only | This is the number of packets which caused the enclosing Statistics group to to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsIPStatsAddrStatByteCount | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.10.1.2 | Counter32 | read-only | This is the number of bytes in all the packets which caused the enclosing Statistics group to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsIPStatsAddrStatCounter1 | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.10.1.3 | Counter32 | read-only | This is the number of times a packet caused a counter_1 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsIPStatsAddrStatCounter2 | 1.3.6.1.4.1.562.36.2.1.100.4.4.2.10.1.4 | Counter32 | read-only | This is the number of times a packet caused a counter_2 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| mscVrNsIPXStats | 1.3.6.1.4.1.562.36.2.1.100.4.5 | |||
| mscVrNsIPXStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.5.1 | not-accessible | This entry controls the addition and deletion of mscVrNsIPXStats components. | |
| mscVrNsIPXStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.5.1.1 | not-accessible | A single entry in the table represents a single mscVrNsIPXStats component. | |
| ROW mscVrNsIPXStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.5.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsIPXStats components. These components can be added and deleted. |
| STR mscVrNsIPXStatsComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsIPXStatsStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsIPXStats tables. |
| NON mscVrNsIPXStatsIndex | 1.3.6.1.4.1.562.36.2.1.100.4.5.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrNsIPXStats tables. |
| mscVrNsIPXStatsAddrStat | 1.3.6.1.4.1.562.36.2.1.100.4.5.2 | |||
| mscVrNsIPXStatsAddrStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrNsIPXStatsAddrStat components. | |
| mscVrNsIPXStatsAddrStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1.1 | not-accessible | A single entry in the table represents a single mscVrNsIPXStatsAddrStat component. | |
| ROW mscVrNsIPXStatsAddrStatRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrNsIPXStatsAddrStat components. These components cannot be added nor deleted. |
| STR mscVrNsIPXStatsAddrStatComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsIPXStatsAddrStatStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsIPXStatsAddrStat tables. |
| STR mscVrNsIPXStatsAddrStatSourceAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsIPXStatsAddrStat tables. |
| STR mscVrNsIPXStatsAddrStatDestinationAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.1.1.11 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsIPXStatsAddrStat tables. |
| mscVrNsIPXStatsAddrStatStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This is the basic statistic used throughout NetSentry by-protocol statistics gathering. It contains counters for total packets, total octets in packets, and two user counters, counter_1 and counter_2. | |
| mscVrNsIPXStatsAddrStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.10.1 | not-accessible | An entry in the mscVrNsIPXStatsAddrStatStatsTable. | |
| C32 mscVrNsIPXStatsAddrStatPacketCount | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.10.1.1 | Counter32 | read-only | This is the number of packets which caused the enclosing Statistics group to to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsIPXStatsAddrStatByteCount | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.10.1.2 | Counter32 | read-only | This is the number of bytes in all the packets which caused the enclosing Statistics group to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsIPXStatsAddrStatCounter1 | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.10.1.3 | Counter32 | read-only | This is the number of times a packet caused a counter_1 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsIPXStatsAddrStatCounter2 | 1.3.6.1.4.1.562.36.2.1.100.4.5.2.10.1.4 | Counter32 | read-only | This is the number of times a packet caused a counter_2 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| mscVrNsATStats | 1.3.6.1.4.1.562.36.2.1.100.4.6 | |||
| mscVrNsATStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.6.1 | not-accessible | This entry controls the addition and deletion of mscVrNsATStats components. | |
| mscVrNsATStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.6.1.1 | not-accessible | A single entry in the table represents a single mscVrNsATStats component. | |
| ROW mscVrNsATStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.6.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsATStats components. These components can be added and deleted. |
| STR mscVrNsATStatsComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.6.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsATStatsStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.6.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsATStats tables. |
| NON mscVrNsATStatsIndex | 1.3.6.1.4.1.562.36.2.1.100.4.6.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrNsATStats tables. |
| mscVrNsATStatsAddrStat | 1.3.6.1.4.1.562.36.2.1.100.4.6.2 | |||
| mscVrNsATStatsAddrStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrNsATStatsAddrStat components. | |
| mscVrNsATStatsAddrStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1.1 | not-accessible | A single entry in the table represents a single mscVrNsATStatsAddrStat component. | |
| ROW mscVrNsATStatsAddrStatRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrNsATStatsAddrStat components. These components cannot be added nor deleted. |
| STR mscVrNsATStatsAddrStatComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsATStatsAddrStatStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsATStatsAddrStat tables. |
| STR mscVrNsATStatsAddrStatSourceAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsATStatsAddrStat tables. |
| STR mscVrNsATStatsAddrStatDestinationAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.1.1.11 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsATStatsAddrStat tables. |
| mscVrNsATStatsAddrStatStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This is the basic statistic used throughout NetSentry by-protocol statistics gathering. It contains counters for total packets, total octets in packets, and two user counters, counter_1 and counter_2. | |
| mscVrNsATStatsAddrStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.10.1 | not-accessible | An entry in the mscVrNsATStatsAddrStatStatsTable. | |
| C32 mscVrNsATStatsAddrStatPacketCount | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.10.1.1 | Counter32 | read-only | This is the number of packets which caused the enclosing Statistics group to to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsATStatsAddrStatByteCount | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.10.1.2 | Counter32 | read-only | This is the number of bytes in all the packets which caused the enclosing Statistics group to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsATStatsAddrStatCounter1 | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.10.1.3 | Counter32 | read-only | This is the number of times a packet caused a counter_1 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsATStatsAddrStatCounter2 | 1.3.6.1.4.1.562.36.2.1.100.4.6.2.10.1.4 | Counter32 | read-only | This is the number of times a packet caused a counter_2 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| mscVrNsDNStats | 1.3.6.1.4.1.562.36.2.1.100.4.7 | |||
| mscVrNsDNStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.7.1 | not-accessible | This entry controls the addition and deletion of mscVrNsDNStats components. | |
| mscVrNsDNStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.7.1.1 | not-accessible | A single entry in the table represents a single mscVrNsDNStats component. | |
| ROW mscVrNsDNStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.7.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsDNStats components. These components can be added and deleted. |
| STR mscVrNsDNStatsComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.7.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsDNStatsStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.7.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsDNStats tables. |
| NON mscVrNsDNStatsIndex | 1.3.6.1.4.1.562.36.2.1.100.4.7.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrNsDNStats tables. |
| mscVrNsDNStatsAddrStat | 1.3.6.1.4.1.562.36.2.1.100.4.7.2 | |||
| mscVrNsDNStatsAddrStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrNsDNStatsAddrStat components. | |
| mscVrNsDNStatsAddrStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1.1 | not-accessible | A single entry in the table represents a single mscVrNsDNStatsAddrStat component. | |
| ROW mscVrNsDNStatsAddrStatRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrNsDNStatsAddrStat components. These components cannot be added nor deleted. |
| STR mscVrNsDNStatsAddrStatComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsDNStatsAddrStatStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsDNStatsAddrStat tables. |
| STR mscVrNsDNStatsAddrStatSourceAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsDNStatsAddrStat tables. |
| STR mscVrNsDNStatsAddrStatDestinationAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.1.1.11 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsDNStatsAddrStat tables. |
| mscVrNsDNStatsAddrStatStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This is the basic statistic used throughout NetSentry by-protocol statistics gathering. It contains counters for total packets, total octets in packets, and two user counters, counter_1 and counter_2. | |
| mscVrNsDNStatsAddrStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.10.1 | not-accessible | An entry in the mscVrNsDNStatsAddrStatStatsTable. | |
| C32 mscVrNsDNStatsAddrStatPacketCount | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.10.1.1 | Counter32 | read-only | This is the number of packets which caused the enclosing Statistics group to to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsDNStatsAddrStatByteCount | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.10.1.2 | Counter32 | read-only | This is the number of bytes in all the packets which caused the enclosing Statistics group to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsDNStatsAddrStatCounter1 | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.10.1.3 | Counter32 | read-only | This is the number of times a packet caused a counter_1 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsDNStatsAddrStatCounter2 | 1.3.6.1.4.1.562.36.2.1.100.4.7.2.10.1.4 | Counter32 | read-only | This is the number of times a packet caused a counter_2 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| mscVrNsBrStats | 1.3.6.1.4.1.562.36.2.1.100.4.8 | |||
| mscVrNsBrStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.8.1 | not-accessible | This entry controls the addition and deletion of mscVrNsBrStats components. | |
| mscVrNsBrStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.8.1.1 | not-accessible | A single entry in the table represents a single mscVrNsBrStats component. | |
| ROW mscVrNsBrStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.8.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrNsBrStats components. These components can be added and deleted. |
| STR mscVrNsBrStatsComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.8.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsBrStatsStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.8.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsBrStats tables. |
| NON mscVrNsBrStatsIndex | 1.3.6.1.4.1.562.36.2.1.100.4.8.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrNsBrStats tables. |
| mscVrNsBrStatsAddrStat | 1.3.6.1.4.1.562.36.2.1.100.4.8.2 | |||
| mscVrNsBrStatsAddrStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrNsBrStatsAddrStat components. | |
| mscVrNsBrStatsAddrStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1.1 | not-accessible | A single entry in the table represents a single mscVrNsBrStatsAddrStat component. | |
| ROW mscVrNsBrStatsAddrStatRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrNsBrStatsAddrStat components. These components cannot be added nor deleted. |
| STR mscVrNsBrStatsAddrStatComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsBrStatsAddrStatStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsBrStatsAddrStat tables. |
| STR mscVrNsBrStatsAddrStatSourceAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsBrStatsAddrStat tables. |
| STR mscVrNsBrStatsAddrStatDestinationAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.1.1.11 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsBrStatsAddrStat tables. |
| mscVrNsBrStatsAddrStatStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This is the basic statistic used throughout NetSentry by-protocol statistics gathering. It contains counters for total packets, total octets in packets, and two user counters, counter_1 and counter_2. | |
| mscVrNsBrStatsAddrStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.10.1 | not-accessible | An entry in the mscVrNsBrStatsAddrStatStatsTable. | |
| C32 mscVrNsBrStatsAddrStatPacketCount | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.10.1.1 | Counter32 | read-only | This is the number of packets which caused the enclosing Statistics group to to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsBrStatsAddrStatByteCount | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.10.1.2 | Counter32 | read-only | This is the number of bytes in all the packets which caused the enclosing Statistics group to be incremented. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsBrStatsAddrStatCounter1 | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.10.1.3 | Counter32 | read-only | This is the number of times a packet caused a counter_1 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsBrStatsAddrStatCounter2 | 1.3.6.1.4.1.562.36.2.1.100.4.8.2.10.1.4 | Counter32 | read-only | This is the number of times a packet caused a counter_2 action to be applied with reference to the enclosing Statistics group. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| mscVrNsFilter | 1.3.6.1.4.1.562.36.2.1.100.4.9 | |||
| mscVrNsFilterRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.4.9.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrNsFilter components. | |
| mscVrNsFilterRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.4.9.1.1 | not-accessible | A single entry in the table represents a single mscVrNsFilter component. | |
| ROW mscVrNsFilterRowStatus | 1.3.6.1.4.1.562.36.2.1.100.4.9.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrNsFilter components. These components cannot be added nor deleted. |
| STR mscVrNsFilterComponentName | 1.3.6.1.4.1.562.36.2.1.100.4.9.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrNsFilterStorageType | 1.3.6.1.4.1.562.36.2.1.100.4.9.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrNsFilter tables. |
| STR mscVrNsFilterNameIndex | 1.3.6.1.4.1.562.36.2.1.100.4.9.1.1.10 | AsciiStringIndex | not-accessible | This variable represents an index for the mscVrNsFilter tables. |
| INT mscVrNsFilterKindIndex | 1.3.6.1.4.1.562.36.2.1.100.4.9.1.1.11 | INTEGER | not-accessible | This variable represents an index for the mscVrNsFilter tables. |
| mscVrNsFilterStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.9.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the various counters associated with a particular filter definition. A packet being processed through a NetSentry filter will encounter zero or more dispositions according to which elements of the filter have patterns which match the packet. This group counts, for the enclosing Filter, how many packets encountered each sort of disposition while being processed through the filter. | |
| mscVrNsFilterStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1 | not-accessible | An entry in the mscVrNsFilterStatsTable. | |
| C32 mscVrNsFilterPacketsSucceeded | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.1 | Counter32 | read-only | This counter contains the number of packets which passed through NetSentry, which happen to have been matched against an element of the enclosing Filter component which had a succeed disposition. |
| C32 mscVrNsFilterBytesSucceeded | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.2 | Counter32 | read-only | This counter counts the number of bytes in the packets counted in the packetsSucceeded. |
| C32 mscVrNsFilterPacketsFailed | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.3 | Counter32 | read-only | This counter contains the number of packets which passed through NetSentry, which happen to have been matched against an element of the enclosing Filter which had a fail disposition. |
| C32 mscVrNsFilterBytesFailed | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.4 | Counter32 | read-only | This counter counts the number of bytes in the packets counted in the packetsFailed counter. |
| C32 mscVrNsFilterPacketsBreaked | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.5 | Counter32 | read-only | This counter contains the number of packets which passed through NetSentry, which happen to have been matched against an element of the enclosing Filter which had a break disposition. |
| C32 mscVrNsFilterBytesBreaked | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.6 | Counter32 | read-only | This counter counts the number of bytes in the packets counted in the packetsBreaked counter. |
| C32 mscVrNsFilterPacketsContinued | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.7 | Counter32 | read-only | This counter contains the number of packets which passed through NetSentry, which happen to have been matched against at least one element of the enclosing Filter which had a continue disposition. Such a packet may also have been counted in one of the packetsSucceeded packetsFailed or packetsBreaked counters, since a continue disposition does not exit a NetSentry filter unless it is the disposition in the last element of the filter. |
| C32 mscVrNsFilterBytesContinued | 1.3.6.1.4.1.562.36.2.1.100.4.9.10.1.8 | Counter32 | read-only | This counter counts the number of bytes in the packets counted in the packetsContinued counter. |
| mscVrNsProvTable | 1.3.6.1.4.1.562.36.2.1.100.4.100 | not-accessible | This contains the global NetSentry control flags. | |
| mscVrNsProvEntry | 1.3.6.1.4.1.562.36.2.1.100.4.100.1 | not-accessible | An entry in the mscVrNsProvTable. | |
| OCT mscVrNsDropConditions | 1.3.6.1.4.1.562.36.2.1.100.4.100.1.1 | OCTET STRING | read-write | This attribute controls under what circumstances NetSentry drops packets. It is possible for NetSentry to drop packets when: There is no memory to contain statistics for this packet (statsNoMem), it is for whatever reason impossible to clone, copy, or log a copy of the packet via the clone_to copy_to or log_to actions respectively (cantCloneTo, cantCopyTo and cantLogTo), and if the packet encounters a filter which is provisioned at a filter point within a protocol component, but not defined in any of the files defined by File components within NetSentry (this is a Null filter). Description of bits: statsNoMem(0) cantCloneTo(1) cantLogTo(2) cantCopyTo(3) cantMacCloneTo(4) nullFilter(5) |
| mscVrNsStatsTable | 1.3.6.1.4.1.562.36.2.1.100.4.101 | not-accessible | This contains the global NetSentry (in particular, non-protocol specific) statistics. | |
| mscVrNsStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.4.101.1 | not-accessible | An entry in the mscVrNsStatsTable. | |
| C32 mscVrNsPacketsProcessed | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.1 | Counter32 | read-only | This attribute counts the total number of packets processed through NetSentry. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsPacketsFailed | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.2 | Counter32 | read-only | This attribute counts the total number of packets processed through NetSentry which ended with a fail disposition. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsStatsNoMem | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.3 | Counter32 | read-only | This attribute counts the total number of packets processed through NetSentry for which statistic should have been gathered, but for which statistics were not gathered due to a failure to allocate memory. Such packets may or may not be dropped according to the values provisioned in dropConditions under the NetSentry component. If this attribute is being incremented, the system is suffering from memory shortfalls, and some operator action is advised. Perhaps memory allocations should be re-provisioned, NetSentry statistics gathering should be reduced, or NetSentry statistics tables should be cleared to temporarily free memory. This counter will wrap around to zero when it exceeds its maximum value, 4294967295. |
| C32 mscVrNsHsaOkayFailed | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.4 | Counter32 | read-only | This attribute counts the total number of packets processed through NetSentry which encountered, and did not match, an hsa_okay pattern. Such packets are likely to be generated from misconfigured hosts. Some operator action to track down these hosts is advised. This counter will wrap around to zero should it ever exceed its maximum value, 4294967295. |
| C32 mscVrNsDepthExceeded | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.5 | Counter32 | read-only | This attribute counts the total number of times a NetSentry filter was executed which referenced too many layers of indirect filters. If this count is non-zero, the filter definitions the unit is using are incorrect, and some operator action to track down the erroneous filter definitions is advised. Filters will not be behaving correctly if this counter is increasing, and security could be compromised. This count should always be zero, and it will wrap around to zero should it ever exceed its maximum value of 4294967295. |
| C32 mscVrNsDroppedStatsNoMem | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.6 | Counter32 | read-only | This counts the total number of packets that were actually dropped due to an inability to allocate memory to hold statistics for the packet. Such a packet must have had a NetSentry statistics gathering action applied to it, in order for the attempt to gather statistics to be made, and the dropConditions attribute must include the statsNoMem value. |
| C32 mscVrNsDroppedCantCloneTo | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.7 | Counter32 | read-only | This counts the total number of packets that were dropped due to the failure of a clone_to action applied to the packet. This counter will only increment if the dropConditions attribute includes the cantCloneTo value. |
| C32 mscVrNsDroppedCantLogTo | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.8 | Counter32 | read-only | This counts the total number of packets that were dropped due to the failure of a log_to action applied to the packet. This counter will only increment if the dropConditions attribute includes the cantLogTo value. |
| C32 mscVrNsDroppedCantCopyTo | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.9 | Counter32 | read-only | This counts the total number of packets that were dropped due to the failure of a copy_to action applied to the packet. This counter will only increment if the dropConditions attribute includes the cantCopyTo value. |
| C32 mscVrNsDroppedNullFilter | 1.3.6.1.4.1.562.36.2.1.100.4.101.1.10 | Counter32 | read-only | This counts the total number of packets that were dropped because the packet passed through a filter point into which was provisioned a filter which was never defined in a file loaded into NetSentry. Such filter points have atached to the the so-call Null Filter, which will either succeed or fail all packets passing through it, depending on whether or not the dropConditions attribute includes the nullFilter value. |
| netSentryMIB | 1.3.6.1.4.1.562.36.2.2.31 | |||
| netSentryGroup | 1.3.6.1.4.1.562.36.2.2.31.1 | |||
| netSentryGroupCA | 1.3.6.1.4.1.562.36.2.2.31.1.1 | |||
| netSentryGroupCA02 | 1.3.6.1.4.1.562.36.2.2.31.1.1.3 | |||
| netSentryGroupCA02A | 1.3.6.1.4.1.562.36.2.2.31.1.1.3.2 | |||
| netSentryCapabilities | 1.3.6.1.4.1.562.36.2.2.31.3 | |||
| netSentryCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.31.3.1 | |||
| netSentryCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.31.3.1.3 | |||
| netSentryCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.31.3.1.3.2 |
RFC description
Manages NetSentry Enterprise security components on Nortel MsCarrier platforms.
Start monitoring Nortel/Bay Networks MscPassport (Magellan Passport) switch (NetSentry traffic policing/filtering) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.