Nortel-MsCarrier-MscPassport-DpnRoutingMIB :: mscRtgDpnModuleId

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DpnRoutingMIB › mscRtgDpnModuleId

mscRtgDpnModuleId

Module: Nortel-MsCarrier-MscPassport-DpnRoutingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnModuleId

OID (numeric): 1.3.6.1.4.1.562.36.2.1.40.4.11.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the Module Identifier (MID) associated with the Passport node.

The MID is used to identify an Passport node supporting the transport of DPN traffic. Its value must be different from that of all MIDs assigned to Passport nodes in this RID subnet (interconnected Passport nodes sharing a RID) and AMs in clusters supported by this subnet. If routing zones are used, it must also be unique from all other MIDs in this zone.

The moduleId must be set when a DpnAddressPlan component is configured on an Passport node.

Changing the value of the moduleId will cause the node to restart.

What is mscRtgDpnModuleId?

This is the Module Identifier (MID) that uniquely identifies this Passport node within its RID subnet and routing zone. An administrator must set it before DPN traffic can be routed, and changing the value forces the node to restart.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.4.11.1.3
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnModuleId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.4.11.1.3.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnModuleId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.40.4.11.1.3.1 i <value>

Start monitoring Nortel MsCarrier MscPassport switch (DPN network routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnModuleId OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (DPN network routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.40mscRtgNortel-MsCarrier-MscPassport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.40.4mscRtgDpnNortel-MsCarrier-MscPassport-DpnRoutingMIB
1.3.6.1.4.1.562.36.2.1.40.4.11mscRtgDpnProvTableNortel-MsCarrier-MscPassport-DpnRoutingMIB
1.3.6.1.4.1.562.36.2.1.40.4.11.1mscRtgDpnProvEntryNortel-MsCarrier-MscPassport-DpnRoutingMIB
1.3.6.1.4.1.562.36.2.1.40.4.11.1.3mscRtgDpnModuleIdNortel-MsCarrier-MscPassport-DpnRoutingMIB