All MIBs › Nortel-MsCarrier-MscPassport-DpnRoutingMIB › mscRtgDpnThroughputMetricCutOff
mscRtgDpnThroughputMetricCutOff
Module: Nortel-MsCarrier-MscPassport-DpnRoutingMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnThroughputMetricCutOff
OID (numeric): 1.3.6.1.4.1.562.36.2.1.40.4.11.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the throughput metric value beyond which a destination RID should be considered unreachable. That is, if a throughput metric to a RID is equal to or greater than this value then the RID will be considered to be unreachable in the throughput class of service.
Lowering this value has the effect of speeding up the detection of the loss of reachability to a RID. It also reduces the amount of Routing Table Update (RTU) traffic generated in this scenario.Care must be taken to ensure that the value chosen is big enough for the longest throughput path in the network.
This attribute is optional; a default of 245 is used when it is not set. It is recommended that all nodes in the network be provisioned with the same cut off value.
What is mscRtgDpnThroughputMetricCutOff?
This sets the throughput-metric threshold (default 245) at or above which a destination RID is treated as unreachable for throughput-class-of-service traffic, mirroring the delay cutoff but applied to the throughput metric instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.4.11.1.5 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnThroughputMetricCutOff
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.4.11.1.5.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnThroughputMetricCutOff.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.40.4.11.1.5.1 i <value>
Start monitoring Nortel MsCarrier MscPassport switch (DPN network routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DpnRoutingMIB::mscRtgDpnThroughputMetricCutOff OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (DPN network routing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.40 | mscRtg | Nortel-MsCarrier-MscPassport-BaseRoutingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.40.4 | mscRtgDpn | Nortel-MsCarrier-MscPassport-DpnRoutingMIB |
| 1.3.6.1.4.1.562.36.2.1.40.4.11 | mscRtgDpnProvTable | Nortel-MsCarrier-MscPassport-DpnRoutingMIB |
| 1.3.6.1.4.1.562.36.2.1.40.4.11.1 | mscRtgDpnProvEntry | Nortel-MsCarrier-MscPassport-DpnRoutingMIB |
| 1.3.6.1.4.1.562.36.2.1.40.4.11.1.5 | mscRtgDpnThroughputMetricCutOff | Nortel-MsCarrier-MscPassport-DpnRoutingMIB |