NORTEL-WLAN-AP-MIB :: ntWlanPortSpeedDpxCfg

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NORTEL-WLAN-AP-MIB › ntWlanPortSpeedDpxCfg

ntWlanPortSpeedDpxCfg

Module: NORTEL-WLAN-AP-MIB

OID (symbolic): NORTEL-WLAN-AP-MIB::ntWlanPortSpeedDpxCfg

OID (numeric): 1.3.6.1.4.1.45.1.11.1.3.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.

What is ntWlanPortSpeedDpxCfg?

The configured (requested) speed and duplex mode for a port, e.g. fullDuplex100, with the allowed values constrained by the port's physical type (a fiber hundredBaseFX port can't be set to 10 Mbps). Admins set this to force a specific speed/duplex when auto-negotiation with the connected switch isn't landing on the desired mode; the actual negotiated result is reported separately in ntWlanPortSpeedDpxStatus.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.11.1.3.1.1.4
snmpwalk -v2c -c public <target> NORTEL-WLAN-AP-MIB::ntWlanPortSpeedDpxCfg

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.11.1.3.1.1.4.1
snmpget -v2c -c public <target> NORTEL-WLAN-AP-MIB::ntWlanPortSpeedDpxCfg.1

Start monitoring Nortel Networks Wireless LAN Access Point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NORTEL-WLAN-AP-MIB::ntWlanPortSpeedDpxCfg OID value, configure state conditions and alerts, and monitor any Nortel Networks Wireless LAN Access Point from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsCMU-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.11wlan2200SYNOPTICS-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.11.1nortelWlanApMibNORTEL-WLAN-AP-MIB
1.3.6.1.4.1.45.1.11.1.3ntWlanApPortMgntNORTEL-WLAN-AP-MIB
1.3.6.1.4.1.45.1.11.1.3.1ntWlanPortTableNORTEL-WLAN-AP-MIB
1.3.6.1.4.1.45.1.11.1.3.1.1ntWlanPortEntryNORTEL-WLAN-AP-MIB
1.3.6.1.4.1.45.1.11.1.3.1.1.4ntWlanPortSpeedDpxCfgNORTEL-WLAN-AP-MIB