All MIBs › NORTEL-WLAN-AP-MIB › ntWlanPortFlowCtrlCfg
ntWlanPortFlowCtrlCfg
Module: NORTEL-WLAN-AP-MIB
OID (symbolic): NORTEL-WLAN-AP-MIB::ntWlanPortFlowCtrlCfg
OID (numeric): 1.3.6.1.4.1.45.1.11.1.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: (1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
What is ntWlanPortFlowCtrlCfg?
Configures the 802.3 flow-control behavior for a port (enabled, disabled, backpressure, or dot3x), with the specific mechanism actually used depending on the port's duplex mode. Admins tune this when a busy uplink is dropping frames and they want the AP to signal the peer switch to pause traffic; the mechanism actually in effect is reported by ntWlanPortFlowCtrlStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.11.1.3.1.1.5 snmpwalk -v2c -c public <target> NORTEL-WLAN-AP-MIB::ntWlanPortFlowCtrlCfg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.11.1.3.1.1.5.1 snmpget -v2c -c public <target> NORTEL-WLAN-AP-MIB::ntWlanPortFlowCtrlCfg.1
Start monitoring Nortel Networks Wireless LAN Access Point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NORTEL-WLAN-AP-MIB::ntWlanPortFlowCtrlCfg OID value, configure state conditions and alerts, and monitor any Nortel Networks Wireless LAN Access Point from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.11 | wlan2200 | SYNOPTICS-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.11.1 | nortelWlanApMib | NORTEL-WLAN-AP-MIB |
| 1.3.6.1.4.1.45.1.11.1.3 | ntWlanApPortMgnt | NORTEL-WLAN-AP-MIB |
| 1.3.6.1.4.1.45.1.11.1.3.1 | ntWlanPortTable | NORTEL-WLAN-AP-MIB |
| 1.3.6.1.4.1.45.1.11.1.3.1.1 | ntWlanPortEntry | NORTEL-WLAN-AP-MIB |
| 1.3.6.1.4.1.45.1.11.1.3.1.1.5 | ntWlanPortFlowCtrlCfg | NORTEL-WLAN-AP-MIB |