NETGEAR-MULTICAST-MIB

All MIBs › NETGEAR-MULTICAST-MIB

Organization: Netgear

Last Updated: 2009-01-03

Description: NETGEAR-MULTICAST-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-MULTICAST-MIB?

NETGEAR-MULTICAST-MIB is a Netgear private MIB module for the Multicast Routing "Flex" package, intended to configure and expose multicast routing capability on Netgear managed switches, but the module description and sample objects available are minimal, so specific object-level detail cannot be confirmed. Broadly, MIBs of this type expose multicast routing enable/configuration state rather than deep hardware fault detail. Any hardware/software status monitoring value here is likely limited to confirming the multicast routing feature is enabled and operating as configured, rather than exposing CPU, memory, or environmental data. As a Netgear feature-package MIB it likely complements standard IGMP/PIM-style MIB structures. It would be deployed on Netgear managed switches where multicast routing (e.g., for IPTV or media distribution) is enabled. Engineers can download the NETGEAR-MULTICAST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear managed switch

Monitoring Examples

No populated sample_objects were provided for this module, so no specific object names can be cited from the source; a concrete monitoring scenario cannot be honestly constructed beyond the general expectation, from the module description, that it exposes multicast routing feature enable/configuration state.

What Can Be Monitored

multicast routing feature enable/disable state
multicast routing configuration parameters

Imported Objects

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From Netgear-MIB

ng7000managedswitch

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathMulticast	1.3.6.1.4.1.4526.10.4			The MIB definitions for Multicast Routing Flex package.
agentMulticastIGMPConfigGroup	1.3.6.1.4.1.4526.10.4.1
INT agentMulticastIGMPAdminMode	1.3.6.1.4.1.4526.10.4.1.1	INTEGER	read-write	This enables or disables IGMP on the system.
agentMulticastIGMPInterfaceTable	1.3.6.1.4.1.4526.10.4.1.2		not-accessible	Provides Per-Interface configuration of IGMP.
agentMulticastIGMPInterfaceEntry	1.3.6.1.4.1.4526.10.4.1.2.1		not-accessible	Information about a table entry.
I32 agentMulticastIGMPInterfaceIfIndex	1.3.6.1.4.1.4526.10.4.1.2.1.1	Integer32	read-only	Identifies the external interface number.
INT agentMulticastIGMPInterfaceAdminMode	1.3.6.1.4.1.4526.10.4.1.2.1.2	INTEGER	read-write	This enables or disables IGMP on this interface.
agentMulticastPIMConfigGroup	1.3.6.1.4.1.4526.10.4.2
INT agentMulticastPIMConfigMode	1.3.6.1.4.1.4526.10.4.2.1	INTEGER	read-write	This controls which PIM mode configuration the PIM-MIB displays.
agentMulticastPIMSMConfigGroup	1.3.6.1.4.1.4526.10.4.3
INT agentMulticastPIMSMAdminMode	1.3.6.1.4.1.4526.10.4.3.1	INTEGER	read-write	This enables or disables PIM Sparse Mode on the system.
I32 agentMulticastPIMSMDataThresholdRate	1.3.6.1.4.1.4526.10.4.3.2	Integer32	read-write	Specifies the minimum rate in Kbits/sec for the last hop router to initiate switching to the shortest path.
I32 agentMulticastPIMSMRegThresholdRate	1.3.6.1.4.1.4526.10.4.3.3	Integer32	read-write	Specifies the minimum rate in Kbits/sec for the RP to switch to the shortest path.
agentMulticastPIMSMStaticRPTable	1.3.6.1.4.1.4526.10.4.3.4		not-accessible	Provides Per-Interface configuration of PIM-SM.
agentMulticastPIMSMStaticRPEntry	1.3.6.1.4.1.4526.10.4.3.4.1		not-accessible	Information about a table entry.
IP agentMulticastPIMSMStaticRPIpAddr	1.3.6.1.4.1.4526.10.4.3.4.1.1	IpAddress	not-accessible	IP Address of the RP.
IP agentMulticastPIMSMStaticRPGroupIpAddr	1.3.6.1.4.1.4526.10.4.3.4.1.2	IpAddress	not-accessible	Group IP Address supported by the RP.
IP agentMulticastPIMSMStaticRPGroupIpMask	1.3.6.1.4.1.4526.10.4.3.4.1.3	IpAddress	not-accessible	Group mask for the group IP Address.
ROW agentMulticastPIMSMStaticRPStatus	1.3.6.1.4.1.4526.10.4.3.4.1.4	RowStatus	read-create	Status of this entry in the Static RP Table. Allowed values are: active(1) - This entry is active destroy(6) - Setting an entry to this value removes the entry from the table.
agentMulticastPIMSMInterfaceTable	1.3.6.1.4.1.4526.10.4.3.5		not-accessible	Provides Per-Interface configuration of PIM-SM.
agentMulticastPIMSMInterfaceEntry	1.3.6.1.4.1.4526.10.4.3.5.1		not-accessible	Allows configuration of parameters not provided in the standard PIM-MIB.
U32 agentMulticastPIMSMInterfaceIndex	1.3.6.1.4.1.4526.10.4.3.5.1.1	Unsigned32	not-accessible	Routing Interface associated with this PIM SM configuration entry.
U32 agentMulticastPIMSMInterfaceCBSRHashMaskLength	1.3.6.1.4.1.4526.10.4.3.5.1.2	Unsigned32	read-write	The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group.
I32 agentMulticastPIMSMInterfaceCRPPreference	1.3.6.1.4.1.4526.10.4.3.5.1.3	Integer32	read-write	The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface.
agentMulticastPIMDMConfigGroup	1.3.6.1.4.1.4526.10.4.4
INT agentMulticastPIMDMAdminMode	1.3.6.1.4.1.4526.10.4.4.1	INTEGER	read-write	This enables or disables PIM Dense Mode on the system.
agentMulticastRoutingConfigGroup	1.3.6.1.4.1.4526.10.4.5
INT agentMulticastRoutingAdminMode	1.3.6.1.4.1.4526.10.4.5.1	INTEGER	read-write	This enables or disables Multicast Routing Mode on the system.
agentMulticastDVMRPConfigGroup	1.3.6.1.4.1.4526.10.4.6
INT agentMulticastDVMRPAdminMode	1.3.6.1.4.1.4526.10.4.6.1	INTEGER	read-write	This enables or disables DVMRP on the system.
agentSnmpTrapFlagsConfigGroupMulticast	1.3.6.1.4.1.4526.10.4.7
INT agentSnmpDVMRPTrapFlag	1.3.6.1.4.1.4526.10.4.7.1	INTEGER	read-write	This enables or disables DVMRP Traps on the system.
INT agentSnmpPIMTrapFlag	1.3.6.1.4.1.4526.10.4.7.2	INTEGER	read-write	This enables or disables PIM Traps on the system.
agentIpStaticMRouteTable	1.3.6.1.4.1.4526.10.4.8		not-accessible	The table listing the Static Multicast Route Entries.
agentIpStaticMRouteEntry	1.3.6.1.4.1.4526.10.4.8.1		not-accessible	Information about a table entry.
IPt agentIpStaticMRouteSrcAddressType	1.3.6.1.4.1.4526.10.4.8.1.1	InetAddressType	not-accessible	The address type of this Multicast data source.
IP agentIpStaticMRouteSrcIpAddr	1.3.6.1.4.1.4526.10.4.8.1.2	InetAddress	not-accessible	The address of the Multicast data source.
IP agentIpStaticMRouteSrcNetMask	1.3.6.1.4.1.4526.10.4.8.1.3	InetAddress	read-create	The network mask for the IP address of the Multicast data source.
IP agentIpStaticMRouteRpfIpAddr	1.3.6.1.4.1.4526.10.4.8.1.4	InetAddress	read-create	The RPF Address.
NUM agentIpStaticMRouteIfIndex	1.3.6.1.4.1.4526.10.4.8.1.5	InterfaceIndex	read-create	The interface index if RPF address is link-local.
I32 agentIpStaticMRoutePreference	1.3.6.1.4.1.4526.10.4.8.1.6	Integer32	read-create	The preference of this route entry.
ROW agentIpStaticMRouteStatus	1.3.6.1.4.1.4526.10.4.8.1.7	RowStatus	read-create	The preference of this route entry.

RFC description

Netgear vendor-private MIB for managing multicast group membership and IGMP snooping operations.

Start monitoring Netgear managed switch (multicast routing Flex package) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-MULTICAST-MIB

What Is NETGEAR-MULTICAST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description