H323-DS1-MIB

All MIBs › H323-DS1-MIB

Organization: Lucent Technologies

Last Updated: 240701

Description: H323-DS1-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H323-DS1-MIB?

H323-DS1-MIB is described in its own source only as a MIB module for entities implementing the DS1 protocol, in the context of H.323-based voice/video-over-IP gateways, with the actual protocol name left as an unfilled placeholder in the module description text, so no concrete object list is confirmable. Modules with this naming pattern generically extend the standard DS1/E1 telephony trunk MIB to the H.323 gateway context, exposing DS1 line configuration and alarm/error/framing status. In practice such a MIB would be used to monitor hardware trunk health, such as line coding errors, loss-of-signal alarms, and framing errors on digital T1/E1 interfaces on VoIP gateway hardware, though this cannot be confirmed from the available source. It would typically depend on the IETF standard DS1/E1 MIB family (RFC 1406/2495) for its base object definitions, extended for H.323 gateway use. Typical deployment is on H.323 VoIP or media gateways terminating T1/E1 digital trunks, per the H323-DS1-MIB MIB definition.

IPNetwork Monitor allows you to monitor SNMP objects defined in H323-DS1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H.323 VoIP/media gateway with T1/E1 digital trunk interfaces

Monitoring Examples

No sample objects were supplied for this MIB and its module description is an unfilled template, so no concrete object names can be cited. Based on the module name alone, monitoring would typically involve a DS1 interface table tracking line status and error-seconds counters on a gateway's digital trunk ports, but this cannot be confirmed from the available source text.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
ObjectName
snmpModules

From SNMPv2-TC

RowStatus
TestAndIncr
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
lucent	1.3.6.1.4.1.1751
products	1.3.6.1.4.1.1751.1
softSwitch	1.3.6.1.4.1.1751.1.1198
h323DeviceServer	1.3.6.1.4.1.1751.1.1198.3
h323Traps	1.3.6.1.4.1.1751.1.1198.3.0
h323DS1	1.3.6.1.4.1.1751.1.1198.3.1			The MIB module for entities implementing the xxxx protocol.
h323System	1.3.6.1.4.1.1751.1.1198.3.1.1
STR dsInfo	1.3.6.1.4.1.1751.1.1198.3.1.1.1	DisplayString	read-only	Device Server information. This value should include the full name and version identification and/or manufacturer information. It is mandatory that this contains only printable ASCII characters
STR dsProtocolInfo	1.3.6.1.4.1.1751.1.1198.3.1.1.2	DisplayString	read-only	Device Server H323/SIP stack information. This value should include the full name and version identification and/or manufacturer information of the H323/SIP Stack used in the device server implementation. It is mandatory that this contains only printable ASCII characters
INT logLevel	1.3.6.1.4.1.1751.1.1198.3.1.1.3	INTEGER	read-write	Device Server Log Level. A minimum logging level is always set for the device servers, which logs errors and warnings. If still more verbosity is required, that can be done by setting this parameter to a required level. 1. Error 2. Warning 3. Info . .
INT succeededCalls	1.3.6.1.4.1.1751.1.1198.3.1.1.4	INTEGER	read-only	Total number of calls successfully made since the last uptime of this device server.
INT activeCalls	1.3.6.1.4.1.1751.1.1198.3.1.1.5	INTEGER	read-only	Number of calls which are still progressing at this time by this device server
INT failedCalls	1.3.6.1.4.1.1751.1.1198.3.1.1.6	INTEGER	read-only	Total Number of calls failed since the last uptime of this device server
INT reloadConfig	1.3.6.1.4.1.1751.1.1198.3.1.1.7	INTEGER	read-write	This is to tell the device server to load it's configuration again. This is done when some configuration parameters need to be updated in the system
INT gatewayDelete	1.3.6.1.4.1.1751.1.1198.3.1.1.8	INTEGER	read-write	Informs the device server to delete the entry of the gateway from the configuration file
INT resetLog	1.3.6.1.4.1.1751.1.1198.3.1.1.9	INTEGER	read-write	To discard previous log and to start logging afresh resetLog would be used

RFC description

H.323 device server management for Lucent technologies; monitors protocol stack information, logging levels, and device status.

Start monitoring Lucent Technologies H.323 VoIP/media gateway (DS1/T1 trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H323-DS1-MIB

What Is H323-DS1-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description