MRV-IN-REACH-IPX-MIB

All MIBs › MRV-IN-REACH-IPX-MIB

Category: IPX Networking, MRV In-Reach Console / Terminal Server

Description: Manages MRV In-Reach IPX routing, SAP, and network configuration objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MRV-IN-REACH-IPX-MIB?

MRV-IN-REACH-IPX-MIB is a vendor-specific MIB from MRV Communications covering IPX (Internetwork Packet Exchange) routing, Service Advertising Protocol (SAP), and related network configuration on its In-Reach console-server/network-access product line. It belongs to the legacy Novell-networking support area of MRV's terminal server products. It exposes configuration objects for IPX routing tables, SAP service advertisements, and general IPX network parameters as implemented on the device. Its role is chiefly configuration-oriented, though it does let an administrator confirm the software-level status of the IPX protocol stack (whether IPX routing/SAP services are active and correctly configured) on the unit. It depends on the base MRV In-Reach product MIB framework, and is deployed on MRV In-Reach access servers used in legacy environments carrying Novell IPX traffic alongside modern IP networking. Engineers can download the MRV-IN-REACH-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MRV-IN-REACH-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MRV In-Reach console/terminal server
network-access server supporting legacy IPX

Monitoring Examples

No sample_objects were provided for this MIB in the source data, so specific table/column names cannot be grounded here. Conceptually, an administrator would use this module's IPX routing and SAP configuration objects to confirm that IPX routes and advertised services on the In-Reach unit match the intended legacy Novell network topology. Any drift between configured IPX network numbers and actual routing behavior would be the kind of anomaly this MIB is meant to surface, though exact object names cannot be cited without more data.

What Can Be Monitored

IPX routing configuration
SAP service advertisement status
IPX network parameter settings

Imported Objects

From MRV-IN-REACH-PRODUCT-DIVISION-MIB

mrvInReachProductDivision

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ipxIfEntry	1.3.6.1.4.1.33.15.2.1.1		not-accessible	IPX interface parameters and counters.
CTR ipxIfErrors	1.3.6.1.4.1.33.15.2.1.1.7	Counter	read-only	The number of IPX errors seen on this interface.
INT ipxIfFilterAction	1.3.6.1.4.1.33.15.6.1.1.7	INTEGER	read-write	The IPX filter action to be taken, either Forward or Discard.
INT ipxIfFilterDestNetwork	1.3.6.1.4.1.33.15.6.1.1.2	INTEGER	read-only	The destination IPX network to be filtered.
OCT ipxIfFilterDestNode	1.3.6.1.4.1.33.15.6.1.1.3	OCTET STRING	read-only	The destination IPX node to be filtered.
ipxIfFilterEntry	1.3.6.1.4.1.33.15.6.1.1		not-accessible	IPX Source and Destination interface Filters.
INT ipxIfFilterIndex	1.3.6.1.4.1.33.15.6.1.1.1	INTEGER	read-only	The interface to which this IPX Address filter applies. A value of ifIndex.
INT ipxIfFilterPacketType	1.3.6.1.4.1.33.15.6.1.1.6	INTEGER	read-only	The IPX packet type to be filtered.
INT ipxIfFilterRowStatus	1.3.6.1.4.1.33.15.6.1.1.8	INTEGER	read-write	The IPX Filter create or delete function.
INT ipxIfFilterSourceNetwork	1.3.6.1.4.1.33.15.6.1.1.4	INTEGER	read-only	The destination IPX network to be filtered.
OCT ipxIfFilterSourceNode	1.3.6.1.4.1.33.15.6.1.1.5	OCTET STRING	read-only	The destination IPX node to be filtered.
INT ipxIfFilterStatusDestNetworkAll	1.3.6.1.4.1.33.15.6.1.1.9	INTEGER	read-only	The IPX Filter flag meaning ALL destination networks.
INT ipxIfFilterStatusDestNodeAll	1.3.6.1.4.1.33.15.6.1.1.10	INTEGER	read-only	The IPX Filter flag meaning ALL destination nodes.
INT ipxIfFilterStatusPacketTypeAll	1.3.6.1.4.1.33.15.6.1.1.13	INTEGER	read-only	The IPX Filter flag meaning ALL packet types.
INT ipxIfFilterStatusSourceNetworkAll	1.3.6.1.4.1.33.15.6.1.1.11	INTEGER	read-only	The IPX Filter flag meaning ALL source networks.
INT ipxIfFilterStatusSourceNodeAll	1.3.6.1.4.1.33.15.6.1.1.12	INTEGER	read-only	The IPX Filter flag meaning ALL source nodes.
ipxIfFilterTable	1.3.6.1.4.1.33.15.6.1		not-accessible	A list of IPX interface Source and Destination address Filter entries.
CTR ipxIfFramesIn	1.3.6.1.4.1.33.15.2.1.1.5	Counter	read-only	The number of IPX frames received on this interface.
CTR ipxIfFramesOut	1.3.6.1.4.1.33.15.2.1.1.6	Counter	read-only	The number of IPX frames sent on this interface.
INT ipxIfFrameStyle	1.3.6.1.4.1.33.15.2.1.1.4	INTEGER	read-write	Control for the CSMA/CD frame style to use on this interface.
INT ipxIfIndex	1.3.6.1.4.1.33.15.2.1.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT ipxIfNetbiosForwarding	1.3.6.1.4.1.33.15.3.2.1.2	INTEGER	read-write	Control whether Netbios packet will be forwarded in or out on this interface.
CTR ipxIfNetbiosIn	1.3.6.1.4.1.33.15.3.2.1.3	Counter	read-only	The number of IPX Netbios frames received on this interface.
CTR ipxIfNetbiosOut	1.3.6.1.4.1.33.15.3.2.1.4	Counter	read-only	The number of IPX Netbios frames sent on this interface.
INT ipxIfNetwork	1.3.6.1.4.1.33.15.2.1.1.3	INTEGER	read-write	The IPX network number of the network to which this interface is attached.
INT ipxIfProtocolPriority	1.3.6.1.4.1.33.15.2.1.1.10	INTEGER	read-write	This value defines the priority at which all Internet Routed packets will be placed on the WAN output queue.
CTR ipxIfRipAgedOut	1.3.6.1.4.1.33.15.4.1.1.7	Counter	read-only	The number of entries timed out and discarded on this interface.
INT ipxIfRipBcst	1.3.6.1.4.1.33.15.4.1.1.2	INTEGER	read-write	Control whether RIP packets will be broadcasted out this interface.
INT ipxIfRipBcstDiscardTimeout	1.3.6.1.4.1.33.15.4.1.1.3	INTEGER	read-write	The number of seconds to wait before discarding information learned from a RIP broadcast.
INT ipxIfRipBcstTimer	1.3.6.1.4.1.33.15.4.1.1.4	INTEGER	read-write	The number of seconds to wait between sending out RIP broadcasts.
INT ipxIfRipFilterAction	1.3.6.1.4.1.33.15.6.2.1.3	INTEGER	read-write	The IPX RIP filter action to be taken, either ALLOW or DENY.
ipxIfRipFilterEntry	1.3.6.1.4.1.33.15.6.2.1		not-accessible	IPX RIP interface Filters.
OCT ipxIfRipFilterHost	1.3.6.1.4.1.33.15.6.2.1.6	OCTET STRING	read-only	The RIP Filter IPX Host Address from which RIP will ALLOW/DENY IMPORT of routes.
INT ipxIfRipFilterNetwork	1.3.6.1.4.1.33.15.6.2.1.1	INTEGER	read-only	The IPX RIP network to be filtered.
INT ipxIfRipFilterNetworkAll	1.3.6.1.4.1.33.15.6.2.1.5	INTEGER	read-only	The IPX RIP Filter flag meaning filter ALL networks.
INT ipxIfRipFilterRowStatus	1.3.6.1.4.1.33.15.6.2.1.4	INTEGER	read-write	The IPX RIP Filter create or delete function.
ipxIfRipFilterTable	1.3.6.1.4.1.33.15.6.2		not-accessible	A list of IPX interface RIP Filter entries.
INT ipxIfRipFilterType	1.3.6.1.4.1.33.15.6.2.1.2	INTEGER	read-only	The IPX RIP filter type, either IMPORT or EXPORT.
CTR ipxIfRipIn	1.3.6.1.4.1.33.15.4.1.1.5	Counter	read-only	The number of RIP broadcasts received on this interface.
CTR ipxIfRipOut	1.3.6.1.4.1.33.15.4.1.1.6	Counter	read-only	The number of RIP broadcasts sent on this interface.
CTR ipxIfSapAgedOut	1.3.6.1.4.1.33.15.5.1.1.7	Counter	read-only	The number entries for this interface discarded due to aging timeout.
INT ipxIfSapBcst	1.3.6.1.4.1.33.15.5.1.1.2	INTEGER	read-write	Control whether SAP packets will be broadcasted out this interface.
INT ipxIfSapBcstDiscardTimeout	1.3.6.1.4.1.33.15.5.1.1.3	INTEGER	read-write	The number of seconds to wait before discarding information learned from a SAP broadcast.
INT ipxIfSapBcstTimer	1.3.6.1.4.1.33.15.5.1.1.4	INTEGER	read-write	The number of seconds to wait between sending out SAP broadcasts.
INT ipxIfSapFilterAction	1.3.6.1.4.1.33.15.6.3.1.4	INTEGER	read-write	The IPX SAP filter action to be taken, either ALLOW or DENY.
ipxIfSapFilterEntry	1.3.6.1.4.1.33.15.6.3.1		not-accessible	IPX SAP interface Filters.
OCT ipxIfSapFilterHost	1.3.6.1.4.1.33.15.6.3.1.9	OCTET STRING	read-only	The IPX Host address from which SAP will ALLOW/DENY IMPORT of services .
STR ipxIfSapFilterName	1.3.6.1.4.1.33.15.6.3.1.8	DisplayString	read-only	The name of the service to be filtered.
INT ipxIfSapFilterNetwork	1.3.6.1.4.1.33.15.6.3.1.1	INTEGER	read-only	The IPX SAP network to be filtered.
INT ipxIfSapFilterNetworkAll	1.3.6.1.4.1.33.15.6.3.1.6	INTEGER	read-only	The IPX SAP Filter flag meaning filter ALL networks.
INT ipxIfSapFilterRowStatus	1.3.6.1.4.1.33.15.6.3.1.5	INTEGER	read-write	The IPX SAP Filter create or delete function.
INT ipxIfSapFilterServiceType	1.3.6.1.4.1.33.15.6.3.1.3	INTEGER	read-only	The IPX SAP service type to which this filter applies.
INT ipxIfSapFilterServiceTypeAll	1.3.6.1.4.1.33.15.6.3.1.7	INTEGER	read-only	The IPX SAP Filter flag meaning filter ALL service types.
ipxIfSapFilterTable	1.3.6.1.4.1.33.15.6.3		not-accessible	A list of IPX interface SAP Filter entries.
INT ipxIfSapFilterType	1.3.6.1.4.1.33.15.6.3.1.2	INTEGER	read-only	The IPX SAP filter type, either IMPORT or EXPORT.
CTR ipxIfSapIn	1.3.6.1.4.1.33.15.5.1.1.5	Counter	read-only	The number SAP broadcasts received on this interface.
CTR ipxIfSapOut	1.3.6.1.4.1.33.15.5.1.1.6	Counter	read-only	The number SAP broadcasts sent on this interface.
INT ipxIfState	1.3.6.1.4.1.33.15.2.1.1.2	INTEGER	read-write	Control for IPX routing services for this interface.
INT ipxIfStatusNetwork	1.3.6.1.4.1.33.15.2.1.1.12	INTEGER	read-only	The IPX network number that is actually in use on the attached interface. This value may have been learned via listening to the attached network.
ipxIfTable	1.3.6.1.4.1.33.15.2.1		not-accessible	A list of IPX interface entries.
INT ipxIfTransitDelay	1.3.6.1.4.1.33.15.2.1.1.8	INTEGER	read-write	The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. A value of 0 means that the system will calculate this value based on the measured speed of the interface.
INT ipxIfTransitDelayActual	1.3.6.1.4.1.33.15.2.1.1.9	INTEGER	read-only	The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface.
INT ipxIfWatchdogSpoof	1.3.6.1.4.1.33.15.2.1.1.11	INTEGER	read-write	Control for whether or not this router responds to IPX watchog requests on this interface.
INT ipxInternalNetwork	1.3.6.1.4.1.33.15.1.2	INTEGER	read-write	The IPX Internal Network to use on the the IPX Router.
INT ipxNetbiosHopLimit	1.3.6.1.4.1.33.15.3.1	INTEGER	read-write	Maximum number of hops that an IPX Netbios packet may make.
ipxNetbiosIfEntry	1.3.6.1.4.1.33.15.3.2.1		not-accessible	IPX interface parameters and counters.
INT ipxNetbiosIfIndex	1.3.6.1.4.1.33.15.3.2.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipxNetbiosIfTable	1.3.6.1.4.1.33.15.3.2		not-accessible	A list of IPX interface entries.
INT ipxPrinterEthernet	1.3.6.1.4.1.33.15.8.2	INTEGER	read-write	Control for use of Ethernet-style message framing, with the IPX protocol type. Mutually exclusive with ipxPrinterMac, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.
INT ipxPrinterMac	1.3.6.1.4.1.33.15.8.3	INTEGER	read-write	Control for use of MAC-only message framing, with no protocol type. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.
INT ipxPrinterMac802_2	1.3.6.1.4.1.33.15.8.4	INTEGER	read-write	Control for use of MAC message framing with 802.2 framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2_Snap.
INT ipxPrinterMac802_2_Snap	1.3.6.1.4.1.33.15.8.5	INTEGER	read-write	Control for use of MAC-only message framing with 802 Snap framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2.
ipxPrinterPortEntry	1.3.6.1.4.1.33.15.8.1.1		not-accessible	IPX printer parameter values for a character port.
INT ipxPrinterPortIndex	1.3.6.1.4.1.33.15.8.1.1.1	INTEGER	read-only	An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
INT ipxPrinterPortPrinter	1.3.6.1.4.1.33.15.8.1.1.4	INTEGER	read-write	An available remote printer on ixpPrinterPortServer.
STR ipxPrinterPortServer	1.3.6.1.4.1.33.15.8.1.1.3	DisplayString	read-write	The name of an active print server on the network.
INT ipxPrinterPortStatus	1.3.6.1.4.1.33.15.8.1.1.2	INTEGER	read-write	Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
ipxPrinterPortTable	1.3.6.1.4.1.33.15.8.1		not-accessible	A list of IPX printer character port entries.
INT ipxRipAge	1.3.6.1.4.1.33.15.4.2.1.6	INTEGER	read-only	The age of the RIP entry in seconds.
ipxRipEntry	1.3.6.1.4.1.33.15.4.2.1		not-accessible	IPX interface parameters and counters.
INT ipxRipHops	1.3.6.1.4.1.33.15.4.2.1.4	INTEGER	read-only	The number of hops to reach the router.
ipxRipIfEntry	1.3.6.1.4.1.33.15.4.1.1		not-accessible	IPX interface parameters and counters.
INT ipxRipIfIndex	1.3.6.1.4.1.33.15.4.1.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipxRipIfTable	1.3.6.1.4.1.33.15.4.1		not-accessible	A list of IPX interface entries.
INT ipxRipInterface	1.3.6.1.4.1.33.15.4.2.1.3	INTEGER	read-only	The interface to reach the router. A value of ifIndex.
INT ipxRipNetwork	1.3.6.1.4.1.33.15.4.2.1.1	INTEGER	read-only	An IPX network number to which this router knows a path.
OCT ipxRipRouter	1.3.6.1.4.1.33.15.4.2.1.2	OCTET STRING	read-only	The Ethernet address of an IPX router on this network.
ipxRipRtEntry	1.3.6.1.4.1.33.15.4.3.1		not-accessible	IPX Routing Entry information
INT ipxRipRtHops	1.3.6.1.4.1.33.15.4.3.1.4	INTEGER	read-write	The number of hops to reach the router.
INT ipxRipRtInterface	1.3.6.1.4.1.33.15.4.3.1.3	INTEGER	read-only	The interface to reach the router. A value of ifIndex.
INT ipxRipRtNetwork	1.3.6.1.4.1.33.15.4.3.1.1	INTEGER	read-only	An IPX network number to which this router knows a path.
INT ipxRipRtOrigin	1.3.6.1.4.1.33.15.4.3.1.6	INTEGER	read-only	The source of the RIP entry, either Learned via RIP or Static.
OCT ipxRipRtRouter	1.3.6.1.4.1.33.15.4.3.1.2	OCTET STRING	read-only	The Ethernet address of an IPX router on this network.
INT ipxRipRtRowStatus	1.3.6.1.4.1.33.15.4.3.1.7	INTEGER	read-write	Create or Delete RIP routing table entries.
ipxRipRtTable	1.3.6.1.4.1.33.15.4.3		not-accessible	A list of RIP Routing entries.
INT ipxRipRtTransTime	1.3.6.1.4.1.33.15.4.3.1.5	INTEGER	read-write	The number of 55 millisecond ticks it takes for a packet to travel to the router.
ipxRipTable	1.3.6.1.4.1.33.15.4.2		not-accessible	A list of RIP entries.
INT ipxRipTransTime	1.3.6.1.4.1.33.15.4.2.1.5	INTEGER	read-only	The number of 55 millisecond ticks it takes for a packet to travel to the router.
INT ipxRouting	1.3.6.1.4.1.33.15.1.1	INTEGER	read-write	Control for IPX routing services.
INT ipxSapAge	1.3.6.1.4.1.33.15.5.2.1.7	INTEGER	read-only	The age of the Sap entry in seconds.
ipxSapEntry	1.3.6.1.4.1.33.15.5.2.1		not-accessible	IPX interface parameters and counters.
OCT ipxSapHost	1.3.6.1.4.1.33.15.5.2.1.3	OCTET STRING	read-only	The Ethernet address of the IPX host of the service.
ipxSapIfEntry	1.3.6.1.4.1.33.15.5.1.1		not-accessible	IPX interface parameters and counters.
INT ipxSapIfIndex	1.3.6.1.4.1.33.15.5.1.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipxSapIfTable	1.3.6.1.4.1.33.15.5.1		not-accessible	A list of IPX interface entries.
INT ipxSapInterface	1.3.6.1.4.1.33.15.5.2.1.5	INTEGER	read-only	The interface of the router in the direction of the service. A value of ifIndex.
STR ipxSapName	1.3.6.1.4.1.33.15.5.2.1.1	DisplayString	read-only	The name of the service, null filled.
INT ipxSapNetwork	1.3.6.1.4.1.33.15.5.2.1.2	INTEGER	read-only	The IPX network number on which the service's host resides.
INT ipxSapSocket	1.3.6.1.4.1.33.15.5.2.1.4	INTEGER	read-only	The socket number of the service on the host.
INT ipxSapSvAge	1.3.6.1.4.1.33.15.5.3.1.10	INTEGER	read-only	The age of the Sap entry in seconds.
ipxSapSvEntry	1.3.6.1.4.1.33.15.5.3.1		not-accessible	IPX interface parameters and counters.
INT ipxSapSvHops	1.3.6.1.4.1.33.15.5.3.1.8	INTEGER	read-write	The number of hops to the Service.
OCT ipxSapSvHost	1.3.6.1.4.1.33.15.5.3.1.3	OCTET STRING	read-only	The Ethernet address of the IPX host of the service.
INT ipxSapSvInterface	1.3.6.1.4.1.33.15.5.3.1.5	INTEGER	read-only	The interface of the router in the direction of the service. A value of ifIndex.
STR ipxSapSvName	1.3.6.1.4.1.33.15.5.3.1.1	DisplayString	read-only	The name of the service.
INT ipxSapSvNetwork	1.3.6.1.4.1.33.15.5.3.1.2	INTEGER	read-only	The IPX network number on which the service's host resides.
INT ipxSapSvOrigin	1.3.6.1.4.1.33.15.5.3.1.6	INTEGER	read-only	The source of the RIP entry, either Learned via RIP or Static.
INT ipxSapSvRowStatus	1.3.6.1.4.1.33.15.5.3.1.9	INTEGER	read-write	Create or Delete SAP Service table entries.
INT ipxSapSvSocket	1.3.6.1.4.1.33.15.5.3.1.4	INTEGER	read-only	The socket number of the service on the host.
ipxSapSvTable	1.3.6.1.4.1.33.15.5.3		not-accessible	A list of SAP entries.
INT ipxSapSvType	1.3.6.1.4.1.33.15.5.3.1.7	INTEGER	read-only	The type of the service. The enumeration is an incomplete set of all possible values.
ipxSapTable	1.3.6.1.4.1.33.15.5.2		not-accessible	A list of SAP entries.
INT ipxSapType	1.3.6.1.4.1.33.15.5.2.1.6	INTEGER	read-only	The type of the service. The enumeration is an incomplete set of all possible values.
INT ipxTimeout	1.3.6.1.4.1.33.15.8.1.1.5	INTEGER	read-write	A control to set the the time at which a print job from a print server will be timed out and the port freed.
xIpx	1.3.6.1.4.1.33.15
xIpxFilter	1.3.6.1.4.1.33.15.6
xIpxIf	1.3.6.1.4.1.33.15.2
xIpxNetbios	1.3.6.1.4.1.33.15.3
xIpxPrinter	1.3.6.1.4.1.33.15.8
xIpxRip	1.3.6.1.4.1.33.15.4
xIpxSap	1.3.6.1.4.1.33.15.5
xIpxSystem	1.3.6.1.4.1.33.15.1

RFC description

MRV Communications In-Reach IPX protocol MIB for managing Novell IPX/SPX protocol functionality on In-Reach devices (vendor-private).

Start monitoring MRV In-Reach console/terminal server (legacy IPX routing/SAP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MRV-IN-REACH-IPX-MIB

What Is MRV-IN-REACH-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description