NBS-EUSM-MIB :: nbsEusmCableTestStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NBS-EUSM-MIB › nbsEusmCableTestStatus

nbsEusmCableTestStatus

Module: NBS-EUSM-MIB

OID (symbolic): NBS-EUSM-MIB::nbsEusmCableTestStatus

OID (numeric): 1.3.6.1.4.1.629.202.3.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: To initiate and get the status of the cable test feature. It is applicable only to copper ports. In the future we may have multiple copper ports. A GET on this object will show testIdle if a test has never been run, or testCompleted(4) if it has.

When testStart(2) is SET, for a short time of about 3 seconds you would expect to see testInProgress(3). Time-stamp of the test start will be sent by the SNMP agent to the line-card to keep track of the time instance of the test.

What is nbsEusmCableTestStatus?

Initiates and reports the state of a copper-cable diagnostic test on this port: writing testStart(2) begins the test, which briefly reports testInProgress(3) (about 3 seconds) before settling on testCompleted(4); testIdle(5) is shown if no test has ever been run.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.202.3.2.1.1
snmpwalk -v2c -c public <target> NBS-EUSM-MIB::nbsEusmCableTestStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.629.202.3.2.1.1.1
snmpget -v2c -c public <target> NBS-EUSM-MIB::nbsEusmCableTestStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.629.202.3.2.1.1.1 i <value>

Start monitoring MRV Communications NBS modular Ethernet switch/media-converter chassis (EUSM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBS-EUSM-MIB::nbsEusmCableTestStatus OID value, configure state conditions and alerts, and monitor any MRV Communications NBS modular Ethernet switch/media-converter chassis (EUSM) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.629nbaseCORE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.629.202nbsEusmMibNBS-EUSM-MIB
1.3.6.1.4.1.629.202.3nbsEusmTestGrpNBS-EUSM-MIB
1.3.6.1.4.1.629.202.3.2nbsEusmCableTestTableNBS-EUSM-MIB
1.3.6.1.4.1.629.202.3.2.1nbsEusmCableTestEntryNBS-EUSM-MIB
1.3.6.1.4.1.629.202.3.2.1.1nbsEusmCableTestStatusNBS-EUSM-MIB