All MIBs › MWR-ETHERNET-MIB
Organization: Dragonwave Inc.
Last Updated: 2014-10-08
Category: LAN Management
Description: Manages Dragonwave MWR Ethernet interface configuration and traffic statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MWR-ETHERNET-MIB?
MWR-ETHERNET-MIB is a DragonWave Inc. proprietary MIB reporting Ethernet and system-level status on DragonWave microwave radio (MWR) link equipment. Its objects cover system type and packet-switch mode (plus their operational status), current negotiated speed, overall operational status, fault severity, chassis temperature, platform type, and a system-reset action. As a hardware/performance-status MIB it lets an administrator confirm a microwave link's current operating speed and watch chassis temperature and fault severity for early signs of a hardware problem. It is deployed on DragonWave microwave radio link equipment. Engineers can download the MWR-ETHERNET-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MWR-ETHERNET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- DragonWave Inc. microwave radio link equipment
Monitoring Examples
An administrator checks mwrSystemFaultSeverity alongside mwrSystemTemperature on a DragonWave radio unit reporting a throughput drop, to confirm whether an active fault or thermal condition is the underlying cause.
What Can Be Monitored
- negotiated link speed
- chassis temperature and fault severity
This MIB depends on
Related MIBs
Imported Objects
| mwr | OBJECT-IDENTITY |
From EQUIPMENT-COMMON-MIB
| EnableType | |
| equipmentAlarmActiveConditionId | OBJECT-TYPE |
| equipmentOutTrapsCounter | OBJECT-TYPE |
| equipmentTrapInfo | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using mwrPortStatsInOctet OID:
Select a DragonWave microwave radio (MWR) link equipment (Ethernet/system status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type mwrPortStatsInOctet into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a 64-bit counter representing the incoming octets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mwrPlatformObjId | 1.3.6.1.4.1.7262.4.5.1 | |||
| mwrEbandObjId | 1.3.6.1.4.1.7262.4.5.1.1 | |||
| mwrEnhancedObjId | 1.3.6.1.4.1.7262.4.5.1.2 | |||
| mwrSystem | 1.3.6.1.4.1.7262.4.5.2 | |||
| mwrSystemConfigurations | 1.3.6.1.4.1.7262.4.5.2.1 | |||
| INT mwrSystemType | 1.3.6.1.4.1.7262.4.5.2.1.1 | INTEGER | read-write | Available system types for single carrier and multi carriers systems are: onePlusZero1cr - 1+0 single carrier onePlusZero2cr - 1+0 dual carriers onePlusZero2crXpic - 1+0 dual carriers XPIC |
| INT mwrPacketSwitchMode | 1.3.6.1.4.1.7262.4.5.2.1.2 | INTEGER | read-write | In bridge mode the system is always inband managed on any of the user ports. However in port-isolation mode, the system can be managed outOfBand or inband on a specific port. |
| mwrSysSpeed | 1.3.6.1.4.1.7262.4.5.2.1.3 | |||
| I32 mwrSystemCurrentSpeed | 1.3.6.1.4.1.7262.4.5.2.1.3.1 | Integer32 | read-write | Changes the working speed of the system. |
| mwrSystemStatus | 1.3.6.1.4.1.7262.4.5.2.2 | |||
| INT mwrSystemOperStatus | 1.3.6.1.4.1.7262.4.5.2.2.1 | INTEGER | read-only | The current operational state of the system. |
| INT mwrSystemFaultSeverity | 1.3.6.1.4.1.7262.4.5.2.2.2 | INTEGER | read-only | The current state of the most serious system alarm severity. If system is running diagnostics, the status will be test. |
| I32 mwrSystemTemperature | 1.3.6.1.4.1.7262.4.5.2.2.3 | Integer32 | read-only | The current system temperature. |
| INT mwrPlatformType | 1.3.6.1.4.1.7262.4.5.2.2.4 | INTEGER | read-only | Identifies the system platform type. The possible system types are: - eband - enhanced - enhanced-mc |
| INT mwrPacketSwitchModeStatus | 1.3.6.1.4.1.7262.4.5.2.2.5 | INTEGER | read-only | This object indicates the running configuration for the packet switch mode. |
| INT mwrSystemTypeStatus | 1.3.6.1.4.1.7262.4.5.2.2.6 | INTEGER | read-only | This object indicates the running configuration for the system type status. |
| mwrSystemCommands | 1.3.6.1.4.1.7262.4.5.2.3 | |||
| INT mwrResetSystem | 1.3.6.1.4.1.7262.4.5.2.3.1 | INTEGER | read-write | Writing '1' to this object resets the system. |
| INT mwrSaveConfig | 1.3.6.1.4.1.7262.4.5.2.3.2 | INTEGER | read-write | Writing '1' or 'save' to this object saves running configuration of the system. |
| INT mwrDeleteConfig | 1.3.6.1.4.1.7262.4.5.2.3.3 | INTEGER | read-write | Using this object, either the startup config or the switch config can be deleted. Deleting startup config removes all system configuration for next system restart. Deleting switch config only clears the switch configuration. |
| mwrSystemInventory | 1.3.6.1.4.1.7262.4.5.2.4 | |||
| mwrHwInventory | 1.3.6.1.4.1.7262.4.5.2.4.1 | |||
| STR mwrMacAddress | 1.3.6.1.4.1.7262.4.5.2.4.1.1 | DisplayString | read-only | The MAC Address of the system. |
| STR mwrTargetCfgFilePartNumber | 1.3.6.1.4.1.7262.4.5.2.4.1.2 | DisplayString | read-only | A textual string containing part number of the target configuration file. |
| STR mwrUnitSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.3 | DisplayString | read-only | A textual string containing Serial Number of the Unit. |
| STR mwrUnitAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.4 | DisplayString | read-only | A textual string containing the Assembly Number of the Unit. |
| STR mwrBasebandSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.5 | DisplayString | read-only | A textual string containing Serial no of the baseband. |
| STR mwrBasebandAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.6 | DisplayString | read-only | A textual string containing assembly no of the baseband. |
| STR mwrPsuSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.7 | DisplayString | read-only | A textual string containing Serial no of the PSU. |
| STR mwrPsuAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.8 | DisplayString | read-only | A textual string containing assembly no of the PSU. |
| STR mwrRfSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.9 | DisplayString | read-only | A textual string containing Serial no of the RF. |
| STR mwrRfAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.10 | DisplayString | read-only | A textual string containing assembly no of the RF. |
| STR mwrRfRevisionNo | 1.3.6.1.4.1.7262.4.5.2.4.1.11 | DisplayString | read-only | A textual string containing revision no of the RF. |
| STR mwrDiplexerSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.12 | DisplayString | read-only | A textual string containing Serial no of the Diplexer. |
| STR mwrDiplexerAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.13 | DisplayString | read-only | A textual string containing assembly no of the Diplexer. |
| STR mwrSystemCleiNo | 1.3.6.1.4.1.7262.4.5.2.4.1.14 | DisplayString | read-only | A textual string containing system CLEI code. |
| mwrSwInventory | 1.3.6.1.4.1.7262.4.5.2.4.2 | |||
| mwrSwInventoryTable | 1.3.6.1.4.1.7262.4.5.2.4.2.1 | not-accessible | Table containing the software inventory. | |
| mwrSwInventoryEntry | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1 | not-accessible | Software inventory entry. | |
| INT mwrSwInvBank | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.1 | INTEGER | not-accessible | Software bank in the flash. |
| INT mwrSwInvStatus | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.2 | INTEGER | read-only | Software bank status. |
| STR mwrSwInvOmniRelease | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.3 | DisplayString | read-only | The version number of the Omni. |
| STR mwrSwInvTargetConfFileVersion | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.4 | DisplayString | read-only | The version number of the target configuration file. |
| STR mwrSwInvMibVersion | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.5 | DisplayString | read-only | The version number of the system MIB. |
| STR mwrSwInvSecurityVersion | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.6 | DisplayString | read-only | The version number of the security package. |
| mwrSystemNotifications | 1.3.6.1.4.1.7262.4.5.2.5 | |||
| NTF mwrSysTcfInvalid | 1.3.6.1.4.1.7262.4.5.2.5.1 | This notification is raised when The HW specific factory defined information (TCF) in the system is not valid. | ||
| NTF mwrSysTempOutOfLimit | 1.3.6.1.4.1.7262.4.5.2.5.2 | This notification is raised when the system temperature is out of limits. | ||
| mwrSoftware | 1.3.6.1.4.1.7262.4.5.3 | |||
| mwrSoftwareConfigurations | 1.3.6.1.4.1.7262.4.5.3.1 | |||
| mwrSoftwareStatus | 1.3.6.1.4.1.7262.4.5.3.2 | |||
| INT mwrSwBackupBankStatus | 1.3.6.1.4.1.7262.4.5.3.2.1 | INTEGER | read-only | This object represents the status of the backup bank. |
| mwrSoftwareCommands | 1.3.6.1.4.1.7262.4.5.3.3 | |||
| INT mwrSwCommit | 1.3.6.1.4.1.7262.4.5.3.3.1 | INTEGER | read-write | Writing '1' to this object commits all the active bank settings to the backup bank. |
| INT mwrSwSwitchBanks | 1.3.6.1.4.1.7262.4.5.3.3.2 | INTEGER | read-write | This objects switches bank to the specified bank. Next time the system resets, it loads up from that bank. |
| mwrSoftwareNotifications | 1.3.6.1.4.1.7262.4.5.3.4 | |||
| mwrLicensing | 1.3.6.1.4.1.7262.4.5.4 | |||
| mwrLicensingConfigurations | 1.3.6.1.4.1.7262.4.5.4.1 | |||
| OCT mwrLicenseUpgradeKey | 1.3.6.1.4.1.7262.4.5.4.1.1 | OCTET STRING | read-write | The 33 Bytes licensing key used for upgrading features/capacity. Reading this object always returns an empty string. |
| mwrLicensingStatus | 1.3.6.1.4.1.7262.4.5.4.2 | |||
| I32 mwrLicenseCount | 1.3.6.1.4.1.7262.4.5.4.2.1 | Integer32 | read-only | This object indicates the number of times the system has been upgraded/downgraded with features/capacity. |
| I32 mwrLicensedSpeed | 1.3.6.1.4.1.7262.4.5.4.2.2 | Integer32 | read-only | This object indicates the system licensed speed. |
| mwrLicenseFeaturesTable | 1.3.6.1.4.1.7262.4.5.4.2.3 | not-accessible | A table containing supported system licensed features. | |
| mwrLicenseFeaturesEntry | 1.3.6.1.4.1.7262.4.5.4.2.3.1 | not-accessible | A table entry containing supported system licensed features. | |
| I32 mwrLicenseFeatureIndex | 1.3.6.1.4.1.7262.4.5.4.2.3.1.1 | Integer32 | not-accessible | This object indicates the list of system features. |
| I32 mwrLicenseFeatureId | 1.3.6.1.4.1.7262.4.5.4.2.3.1.2 | Integer32 | read-only | 2 ACM (includes WMA where applicable) (LF2) 3 Ethernet UNI (ELINE/ELAN MEF service) (LF3) 4 Packet Fragmentation (LF4) 5 Secured Access (LF5) 6 Ethernet OAM (802.1ag, 802.3ah, Y.1731) (LF6) 7 Advanced Performance Monitoring (LF7) 11 Bandwidth Accelerator (LF11) 13 Header Compression (LF13) |
| STR mwrLicenseFeature | 1.3.6.1.4.1.7262.4.5.4.2.3.1.3 | DisplayString | read-only | The name of the feature. |
| INT mwrLicenseFeatureStatus | 1.3.6.1.4.1.7262.4.5.4.2.3.1.4 | INTEGER | read-only | Specifies whether the feature is unlicensed or licensed. |
| mwrSyncE | 1.3.6.1.4.1.7262.4.5.5 | |||
| mwrSyncEConfigurations | 1.3.6.1.4.1.7262.4.5.5.1 | |||
| INT mwrSyncEState | 1.3.6.1.4.1.7262.4.5.5.1.1 | INTEGER | read-write | In manual mode, SyncE source will use primary clock source and when the primary source has loss of lock, the SyncE goes into holdover. The primary source will be used again after the system regains the lock on primary source. In auto mode, if the current clock source goes out of lock, the recovered clock from the other source will be used. |
| INT mwrSyncEPrimarySource | 1.3.6.1.4.1.7262.4.5.5.1.2 | INTEGER | read-write | Selects which port to be used as SyncE master clock source. |
| INT mwrSyncESecondarySource | 1.3.6.1.4.1.7262.4.5.5.1.3 | INTEGER | read-write | Selects which port to be used as SyncE clock source when the master SyncE clock source is not available. |
| STR mwrSyncEMemberPorts | 1.3.6.1.4.1.7262.4.5.5.1.4 | DisplayString | read-write | Enter a string indicating all SyncE member ports. Example: gi01 gi04 Port options: gi01 gi02 gi03 gi04 radio |
| STR mwrSyncEForcedHoldover | 1.3.6.1.4.1.7262.4.5.5.1.5 | DisplayString | read-write | This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be taken out. The forced timeout can be 0 to 300sec, where 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter indicates the holdover time in sec. The single quote marks i.e. ' ' are not used in the command. |
| STR mwrSyncERevertive | 1.3.6.1.4.1.7262.4.5.5.1.6 | DisplayString | read-write | In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command. |
| INT mwrSyncEWanderFilter | 1.3.6.1.4.1.7262.4.5.5.1.7 | INTEGER | read-write | ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1, vs those based on the 1.544kbit/s hierarchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a bandwidth between 1 and 10 Hz. |
| mwrSyncEStatus | 1.3.6.1.4.1.7262.4.5.5.2 | |||
| INT mwrSyncEClockSource | 1.3.6.1.4.1.7262.4.5.5.2.1 | INTEGER | read-only | Retrieves SyncE clock source currently in use. |
| STR mwrSyncEAcquisitionStatus | 1.3.6.1.4.1.7262.4.5.5.2.2 | DisplayString | read-only | Retrieves SyncE acquisition status. |
| mwrSyncENotifications | 1.3.6.1.4.1.7262.4.5.5.3 | |||
| NTF mwrSynceLostLock | 1.3.6.1.4.1.7262.4.5.5.3.1 | This notification is raised when system has lost synchronization to syncE clock source. | ||
| NTF mwrSynceSecondarySourceInUse | 1.3.6.1.4.1.7262.4.5.5.3.2 | This notification is raised whens ystem has lost synchronization to primary syncE clock source, and now synchronized to secondary source. | ||
| NTF mwrSynceConfigMismatch | 1.3.6.1.4.1.7262.4.5.5.3.3 | This notification is raised when the configuration of syncE between the peers in the radio link is mismatched. | ||
| mwrTiming | 1.3.6.1.4.1.7262.4.5.6 | |||
| mwrTimingConfigurations | 1.3.6.1.4.1.7262.4.5.6.1 | |||
| DAT mwrDateTime | 1.3.6.1.4.1.7262.4.5.6.1.1 | DateAndTime | read-write | The system date and time. |
| ENA mwrSntpEnable | 1.3.6.1.4.1.7262.4.5.6.1.2 | EnableType | read-write | Indicates whether SNTP feature is enabled. |
| I32 mwrSntpOffset | 1.3.6.1.4.1.7262.4.5.6.1.3 | Integer32 | read-write | System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour. |
| mwrSntpServerTable | 1.3.6.1.4.1.7262.4.5.6.1.4 | not-accessible | Table containing SNTP server entries | |
| mwrSntpServerEntry | 1.3.6.1.4.1.7262.4.5.6.1.4.1 | not-accessible | Contains the SNTP server information | |
| I32 mwrSntpServerIndex | 1.3.6.1.4.1.7262.4.5.6.1.4.1.1 | Integer32 | not-accessible | A unique value for each server. |
| IPt mwrSntpServerDomain | 1.3.6.1.4.1.7262.4.5.6.1.4.1.2 | InetAddressType | read-write | Indicates SNTP server inet address type. Valid types are ipv4 or ipv6. |
| IP mwrSntpServerAddress | 1.3.6.1.4.1.7262.4.5.6.1.4.1.3 | InetAddress | read-write | Indicates SNTP server inet address octet string. |
| INT mwrSntpServerStatus | 1.3.6.1.4.1.7262.4.5.6.1.4.1.4 | INTEGER | read-only | The status of the SNTP server. |
| I32 mwrSntpServerStratum | 1.3.6.1.4.1.7262.4.5.6.1.4.1.5 | Integer32 | read-only | Specifies the stratum of a server, 0 for failed server |
| mwrTimingStatus | 1.3.6.1.4.1.7262.4.5.6.2 | |||
| DAT mwrTimingLastDateTimeChanged | 1.3.6.1.4.1.7262.4.5.6.2.1 | DateAndTime | read-only | Date and Time for the last system time adjustment. |
| I32 mwrTimingLastTimeAdjustment | 1.3.6.1.4.1.7262.4.5.6.2.2 | Integer32 | read-only | Last system time adjustment in hundredths of seconds. |
| I32 mwrTimingCummulativeTimeChange | 1.3.6.1.4.1.7262.4.5.6.2.3 | Integer32 | read-only | Cumulative system time adjustment in hundredths of seconds. |
| mwrTimingCommands | 1.3.6.1.4.1.7262.4.5.6.3 | |||
| INT mwrSntpRestoreDefault | 1.3.6.1.4.1.7262.4.5.6.3.1 | INTEGER | read-write | Restores SNTP servers to default Addresses. |
| mwrTimingNotifications | 1.3.6.1.4.1.7262.4.5.6.4 | |||
| NTF mwrSntpServerUnreachable | 1.3.6.1.4.1.7262.4.5.6.4.1 | This notification is raised when one or more of the configured SNTP server is not reachable by the system. | ||
| NTF mwrSystemTimeCorrected | 1.3.6.1.4.1.7262.4.5.6.4.2 | This notification is raised change in system time is detected, and system time is adjusted | ||
| mwrAAA | 1.3.6.1.4.1.7262.4.5.7 | |||
| mwrAAAConfigurations | 1.3.6.1.4.1.7262.4.5.7.1 | |||
| INT mwrAAAUserAuthentication | 1.3.6.1.4.1.7262.4.5.7.1.1 | INTEGER | read-write | This object configures the user authentication method. |
| mwrRadiusConfigurations | 1.3.6.1.4.1.7262.4.5.7.1.2 | |||
| INT mwrRadiusAdminUserStrict | 1.3.6.1.4.1.7262.4.5.7.1.2.1 | INTEGER | read-write | If strict mode is off, the admin user can login when radius is turned off or unreachable. When strict mode is on, admin user will only be authenticated against the radius server. |
| I32 mwrRadiusServerTimeOut | 1.3.6.1.4.1.7262.4.5.7.1.2.2 | Integer32 | read-write | Timeout period for authentication requests |
| I32 mwrRadiusServerDeadTime | 1.3.6.1.4.1.7262.4.5.7.1.2.3 | Integer32 | read-write | Time to declare an unresponsive server 'dead' |
| I32 mwrRadiusServerReTransmit | 1.3.6.1.4.1.7262.4.5.7.1.2.4 | Integer32 | read-write | Maximum number of retransmits to an unresponsive server |
| mwrRadiusServerTable | 1.3.6.1.4.1.7262.4.5.7.1.2.5 | not-accessible | Table containing radius server entries | |
| mwrRadiusServerEntry | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1 | not-accessible | Contains the SNTP server information | |
| I32 mwrRadiusServerIndex | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.1 | Integer32 | not-accessible | A unique value for each radius server. |
| IPt mwrRadiusCfgdHostDomain | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.2 | InetAddressType | read-write | Indicates configured radius inet address type. Valid types are ipv4 or ipv6. |
| IP mwrRadiusCfgdHostAddress | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.3 | InetAddress | read-write | Indicates configured radius server inet address octet string. |
| STR mwrRadiusCfgdHostKey | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.4 | DisplayString | read-write | The key of the configured radius server. |
| mwrNetworking | 1.3.6.1.4.1.7262.4.5.8 | |||
| mwrNetworkingConfigurations | 1.3.6.1.4.1.7262.4.5.8.1 | |||
| mwrNetMgmtPriority | 1.3.6.1.4.1.7262.4.5.8.1.1 | |||
| I32 mwrNetMgmtVlanPriority | 1.3.6.1.4.1.7262.4.5.8.1.1.1 | Integer32 | read-write | The object configures the VLAN priority(0...7) |
| I32 mwrNetMgmtDscp | 1.3.6.1.4.1.7262.4.5.8.1.1.2 | Integer32 | read-write | The Differentiated Services Code Point (DSCP) of IP traffic generated by the system (0...63) |
| mwrNetMgmtIpv4 | 1.3.6.1.4.1.7262.4.5.8.1.2 | |||
| mwrIpv4Table | 1.3.6.1.4.1.7262.4.5.8.1.2.1 | not-accessible | A table containing the IPv4 information. | |
| mwrIpv4Entry | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1 | not-accessible | A table entry containing the IPv4 information. | |
| I32 mwrIpv4Index | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.1 | Integer32 | not-accessible | The IPv4 table index. There is only one entry in this table and can not be deleted. |
| IP mwrIpv4Address | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.2 | IpAddress | read-write | The IPv4 address of the system. |
| IP mwrIpv4SubnetMask | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.3 | IpAddress | read-write | The IPv4 subnet mask of the system. |
| IP mwrIpv4DefaultGateway | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.4 | IpAddress | read-write | The IPv4 default gateway of the system. |
| ROW mwrIpv4RowStatus | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.5 | RowStatus | read-write | This object is used for applying ipv4 configuration attributes simultaneously. |
| IP mwrSecondaryGateway | 1.3.6.1.4.1.7262.4.5.8.1.2.2 | IpAddress | read-write | The IPv4 secondary gateway of the system. |
| mwrNetMgmttIpv6 | 1.3.6.1.4.1.7262.4.5.8.1.3 | |||
| mwrIpv6Table | 1.3.6.1.4.1.7262.4.5.8.1.3.1 | not-accessible | A table containing the IPv6 information. | |
| mwrIpv6Entry | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1 | not-accessible | A table entry containing the IPv6 information. | |
| I32 mwrIpv6Index | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.1 | Integer32 | not-accessible | The IPv6 table index. There is only one entry in this table and can not be deleted. |
| IPt mwrIpv6Domain | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.2 | InetAddressType | read-only | Indicates ipv6 inet address type. |
| IP mwrIpv6Address | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.3 | InetAddress | read-write | Indicates IPv6 inet address octet string. |
| I32 mwrIpv6Prefix | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.4 | Integer32 | read-write | Indicates ipv6 prefix. |
| IPt mwrIpv6GatewayDomain | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.5 | InetAddressType | read-only | Indicates IPv6 gateway inet address type. This will always return IPv6 inet address type. |
| IP mwrIpv6GatewayAddress | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.6 | InetAddress | read-write | Indicates IPv6 gateway inet address octet string. |
| ROW mwrIpv6RowStatus | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.7 | RowStatus | read-write | This object is used for applying IPv6 configuration attributes simultaneously. |
| IPt mwrSecondaryIpv6GatewayDomain | 1.3.6.1.4.1.7262.4.5.8.1.3.2 | InetAddressType | read-only | This object will return the secondary IPv6 gateway inet address type. |
| IP mwrSecondaryIpv6GatewayAddress | 1.3.6.1.4.1.7262.4.5.8.1.3.3 | InetAddress | read-write | This object will return the secondary IPv6 gateway inet address. |
| mwrUserInterfaceMgmt | 1.3.6.1.4.1.7262.4.5.8.1.4 | |||
| ENA mwrTelnetEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.1 | EnableType | read-write | Indicates whether telnet access is allowed. |
| ENA mwrSshEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.2 | EnableType | read-write | Indicates whether ssh access is allowed. This configuration only applies to security mode. |
| ENA mwrHttpEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.3 | EnableType | read-write | Indicates whether http is enabled. |
| ENA mwrHttpsEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.4 | EnableType | read-write | Indicates whether secured http access is allowed. This configuration only applies to security mode. |
| ENA mwrSnmpv1v2cEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.5 | EnableType | read-write | Indicates whether SNMP v1/v2c is allowed in security mode. This configuration only applies to security mode. |
| ENA mwrFtpEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.6 | EnableType | read-write | This object allows enabling or disabling ftp when in secure mode. By default ftp is enabled. |
| mwrFileTransfer | 1.3.6.1.4.1.7262.4.5.8.1.5 | |||
| INT mwrFileXfrDirection | 1.3.6.1.4.1.7262.4.5.8.1.5.1 | INTEGER | read-write | The behavior of the FTP/SFTP machine: 1 - ServerMode 2 - ClientMode 3 - both Server and Client available Mwr 1.0 just supports Client Mode. |
| mwrFileXfrTable | 1.3.6.1.4.1.7262.4.5.8.1.5.2 | not-accessible | Table containing the FTP client parameters. | |
| mwrFileXfrEntry | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1 | not-accessible | Table entry containing the FTP client parameters. | |
| I32 mwrFileXfrSeqID | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.1 | Integer32 | not-accessible | For the same manager, the possibility to define different FTP/SFTP transfer actions. |
| INT mwrFileXfrIdentifier | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.2 | INTEGER | read-create | The identifier of the type of file to be imported/exported. |
| STR mwrFileXfrName | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.3 | DisplayString | read-create | The Name of the file to be imported/exported. |
| INT mwrFileXfrMode | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.4 | INTEGER | read-create | The file transfer mode specifying either a ftp or sftp request. The sftp mode is only supported when security is licensed/installed. |
| IPt mwrFileXfrServerDomain | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.5 | InetAddressType | read-create | The server domain such as IPv4 or IPv6 type. |
| IP mwrFileXfrServerAddress | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.6 | InetAddress | read-create | The server IP address in InetAddress format which could be an IPv4 or IPv6 address. |
| INT mwrFileXfrClientDirection | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.7 | INTEGER | read-create | The behavior of the FTP or SFTP Client: 1 - import, i.e. download data file 2 - export, i.e. upload data file. The only supported option for omni and tcf is import since these files are used only in upgrade case. Also the supported option for pm, eventlog and perfLog is export option. The rest can be imported or exported. |
| STR mwrFileXfrUserName | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.8 | DisplayString | read-create | FTP or SFTP User Name when Client Mode is selected. |
| STR mwrFileXfrPassword | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.9 | DisplayString | read-create | FTP or SFTP password when Client Mode is selected. For get operation - the returned value will be zero length string. |
| I32 mwrFileXfrNumEntries | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.10 | Integer32 | read-create | This object is used to indicate the number of entries for the performance log to be transferred. If it's set to zero, it will transfer the entire file. |
| INT mwrFileXfrStatus | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.11 | INTEGER | read-only | This object contains the current status of the last requested import/export of the corresponding row component. |
| ROW mwrFileXfrRowStatus | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.12 | RowStatus | read-create | The row status variable, used according to: - Manager can create a row using the createAndWait. - Once created, the row is put into notInService by Agent. - On Manager request, row status can be set to active one at a time. This means that the Client has to start the file transfer. - Row data, such as the FileServerAddress, User Name or Password can be changed once the row has been created, but only if this field is set to notInService. All other fields can not be set once the row is created, but the row must be removed and created again. - Manager can use destroy to remove the row. |
| mwrNetMgmtInterfaceTable | 1.3.6.1.4.1.7262.4.5.8.1.6 | not-accessible | Table containing the network management interface configurations. | |
| mwrNetMgmtInterfaceEntry | 1.3.6.1.4.1.7262.4.5.8.1.6.1 | not-accessible | Entry for the network management interface table. | |
| I32 mwrNetMgmtInterfaceIndex | 1.3.6.1.4.1.7262.4.5.8.1.6.1.1 | Integer32 | not-accessible | This object is an index to network management interface table. There will always be one entry in this table. |
| I32 mwrNetMgmtVlanId | 1.3.6.1.4.1.7262.4.5.8.1.6.1.2 | Integer32 | read-write | Indicates the VLAN Id (1...4090) |
| ENA mwrNetMgmtInterface1 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.3 | EnableType | read-write | When this object is enabled the gi0/1 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| INT mwrNetMgmtInterface1Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.4 | INTEGER | read-write | This object indicates whether the gi0/1 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. |
| INT mwrNetMgmtInterface1Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.5 | INTEGER | read-write | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| ENA mwrNetMgmtInterface2 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.6 | EnableType | read-write | When this object is enabled the gi0/2 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| INT mwrNetMgmtInterface2Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.7 | INTEGER | read-write | This object indicates whether the gi0/2 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. |
| INT mwrNetMgmtInterface2Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.8 | INTEGER | read-write | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| ENA mwrNetMgmtInterface3 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.9 | EnableType | read-write | When this object is enabled the gi0/3 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| INT mwrNetMgmtInterface3Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.10 | INTEGER | read-write | This object indicates whether the gi0/3 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. |
| INT mwrNetMgmtInterface3Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.11 | INTEGER | read-write | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| ENA mwrNetMgmtInterface4 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.12 | EnableType | read-write | When this object is enabled the gi0/4 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| INT mwrNetMgmtInterface4Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.13 | INTEGER | read-write | This object indicates whether the gi0/4 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. |
| INT mwrNetMgmtInterface4Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.14 | INTEGER | read-write | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| ROW mwrNetMgmtInterfaceRowStatus | 1.3.6.1.4.1.7262.4.5.8.1.6.1.15 | RowStatus | read-write | This object is used for applying all management interface configuration in an atomic operation. |
| mwrNetworkingStatus | 1.3.6.1.4.1.7262.4.5.8.2 | |||
| mwrMaintenanceIpv4 | 1.3.6.1.4.1.7262.4.5.8.2.1 | |||
| IP mwrMaintenanceIpv4Address | 1.3.6.1.4.1.7262.4.5.8.2.1.1 | IpAddress | read-only | This object indicates the maintenance IPv4 address. |
| IP mwrMaintenanceSubnetMask | 1.3.6.1.4.1.7262.4.5.8.2.1.2 | IpAddress | read-only | This object indicates the maintenance IPv4 subnet mask. |
| IP mwrActiveIpv4Gateway | 1.3.6.1.4.1.7262.4.5.8.2.1.3 | IpAddress | read-only | This object indicates the active IPv4 gateway. |
| mwrMaintenanceIpv6 | 1.3.6.1.4.1.7262.4.5.8.2.2 | |||
| I32 mwrIpv6LinkLocalIPrefix | 1.3.6.1.4.1.7262.4.5.8.2.2.1 | Integer32 | read-only | This object indicates the IPv6 link local prefix. |
| IP mwrIpv6LinkLocalAddress | 1.3.6.1.4.1.7262.4.5.8.2.2.2 | InetAddress | read-only | Indicates ipv6 link local inet address octet string. |
| IP mwrActiveIpv6Gateway | 1.3.6.1.4.1.7262.4.5.8.2.2.3 | InetAddress | read-only | This object indicates the active IPv6 gateway. |
| mwrPeerNetworkingStatus | 1.3.6.1.4.1.7262.4.5.8.3 | |||
| STR mwrPeerMacAddress | 1.3.6.1.4.1.7262.4.5.8.3.1 | DisplayString | read-only | The MAC Address of the peer. |
| IP mwrPeerIpv4Address | 1.3.6.1.4.1.7262.4.5.8.3.2 | IpAddress | read-only | The peer IPv4 Address. |
| IP mwrPeerIpv4SubnetMask | 1.3.6.1.4.1.7262.4.5.8.3.3 | IpAddress | read-only | The peer IPv4 subnet mask. |
| IP mwrPeerIpv4DefaultGateway | 1.3.6.1.4.1.7262.4.5.8.3.4 | IpAddress | read-only | The peer IPv4 default gateway. |
| I32 mwrPeerIpv6Prefix | 1.3.6.1.4.1.7262.4.5.8.3.5 | Integer32 | read-only | The peer IPv6 prefix. |
| IPt mwrPeerIpv6Domain | 1.3.6.1.4.1.7262.4.5.8.3.6 | InetAddressType | read-only | The peer IPv6 domain. |
| IP mwrPeerIpv6Address | 1.3.6.1.4.1.7262.4.5.8.3.7 | InetAddress | read-only | The peer IPv6 address. |
| IPt mwrPeerIpv6GatewayDomain | 1.3.6.1.4.1.7262.4.5.8.3.8 | InetAddressType | read-only | The peer IPv6 gateway domain |
| IP mwrPeerIpv6GatewayAddress | 1.3.6.1.4.1.7262.4.5.8.3.9 | InetAddress | read-only | The peer IPv6 gateway address. |
| I32 mwrPeerVlanId | 1.3.6.1.4.1.7262.4.5.8.3.10 | Integer32 | read-only | The peer vlan Id. |
| I32 mwrPeerVlanPriority | 1.3.6.1.4.1.7262.4.5.8.3.11 | Integer32 | read-only | The peer vlan priority. |
| I32 mwrPeerDscp | 1.3.6.1.4.1.7262.4.5.8.3.12 | Integer32 | read-only | The peer management dscp. |
| mwrNetworkingNotifications | 1.3.6.1.4.1.7262.4.5.8.4 | |||
| mwrEthernet | 1.3.6.1.4.1.7262.4.5.9 | |||
| mwrEthernetConfigurations | 1.3.6.1.4.1.7262.4.5.9.1 | |||
| mwrQos | 1.3.6.1.4.1.7262.4.5.9.1.1 | |||
| ENA mwrQosState | 1.3.6.1.4.1.7262.4.5.9.1.1.1 | EnableType | read-write | Indicates whether QOS is enabled. |
| INT mwrCosSource | 1.3.6.1.4.1.7262.4.5.9.1.1.2 | INTEGER | read-write | Indicates the class of service tag type. Based on the setting system will use the CoS value in the outer VLAN tag, inner VLAN tag, DSCP or MPLS exp. |
| STR mwrOuterTpid | 1.3.6.1.4.1.7262.4.5.9.1.1.3 | DisplayString | read-write | Sets the value of the Q-in-Q outer tag. This tag is also used to classify the single tagged traffic. Default value is 0x8100. |
| STR mwrInnerTpid | 1.3.6.1.4.1.7262.4.5.9.1.1.4 | DisplayString | read-write | Sets the value of the Q-in-Q inner VLAN tag. Default value is 0x8100. |
| mwrCosTable | 1.3.6.1.4.1.7262.4.5.9.1.1.5 | not-accessible | A table of Qos Settings per port, the configuration corresponds to the egress QoS of radio port. | |
| mwrCosEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1 | not-accessible | An entry of Qos setting per port | |
| INT mwrCosIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.1 | INTEGER | not-accessible | A unique name identifying each enet port in port isolation mode or the bridgeMode index when system is configured in bridge mode. |
| QUE mwrCos0 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.2 | QueueType | read-write | User queue assignments for CoS0. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos1 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.3 | QueueType | read-write | User queue assignments for CoS1. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos2 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.4 | QueueType | read-write | User queue assignments for CoS2. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos3 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.5 | QueueType | read-write | User queue assignments for CoS3. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos4 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.6 | QueueType | read-write | User queue assignments for CoS4. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos5 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.7 | QueueType | read-write | User queue assignments for CoS5. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos6 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.8 | QueueType | read-write | User queue assignments for CoS6. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| QUE mwrCos7 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.9 | QueueType | read-write | User queue assignments for CoS7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| ROW mwrCosRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.10 | RowStatus | read-write | Row status for CoS queue mapping. This object is used to apply all CoS settings simultaneously. |
| mwrCosDefValueTable | 1.3.6.1.4.1.7262.4.5.9.1.1.6 | not-accessible | A table containing the CoS default value, the configuration corresponds to the egress QoS of radio port. | |
| mwrCosDefValueEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.6.1 | not-accessible | A table entry containing the CoS default value. | |
| INT mwrCosDefValueIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.1 | INTEGER | not-accessible | Specifies CoS default value for each port in port isolation or in bridge mode. |
| I32 mwrCosDefValue | 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.2 | Integer32 | read-write | Specifies CoS default value for each port in port isolation or in bridge mode. |
| mwrCirQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.7 | not-accessible | A table containing the CIR value for each queue, the configuration corresponds to the egress QoS of radio port. | |
| mwrCirQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1 | not-accessible | A table entry containing the CIR value for each radio queue. | |
| QUE mwrCirQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.1 | QueueType | not-accessible | Specifies CIR queue index for each radio queue. |
| I32 mwrCirQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.2 | Integer32 | read-write | User CIR setting for queue 1. |
| I32 mwrCirQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.3 | Integer32 | read-write | User CIR setting for queue 2. |
| I32 mwrCirQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.4 | Integer32 | read-write | User CIR setting for queue 3. |
| I32 mwrCirQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.5 | Integer32 | read-write | User CIR setting for queue 4. |
| I32 mwrCirQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.6 | Integer32 | read-write | User CIR setting for queue 5. |
| I32 mwrCirQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.7 | Integer32 | read-write | User CIR setting for queue 6. |
| I32 mwrCirQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.8 | Integer32 | read-write | User CIR setting for queue 7. |
| I32 mwrCirQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.9 | Integer32 | read-write | User CIR setting for queue 8. |
| ROW mwrCirQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.10 | RowStatus | read-write | The CIR table Row status. This object is used to apply all queue CIR settings simultaneously. |
| mwrCbsQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.8 | not-accessible | A table containing CBS settings for each queue, the configuration corresponds to the egress QoS of radio port. | |
| mwrCbsQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1 | not-accessible | A table entry containing CBS settings for each queue. | |
| QUE mwrCbsQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.1 | QueueType | not-accessible | Specifies CBS queue index for each radio queue. |
| I32 mwrCbsQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.2 | Integer32 | read-write | User CBS setting for queue 1. |
| I32 mwrCbsQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.3 | Integer32 | read-write | User CBS setting for queue 2. |
| I32 mwrCbsQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.4 | Integer32 | read-write | User CBS setting for queue 3. |
| I32 mwrCbsQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.5 | Integer32 | read-write | User CBS setting for queue 4. |
| I32 mwrCbsQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.6 | Integer32 | read-write | User CBS setting for queue 5. |
| I32 mwrCbsQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.7 | Integer32 | read-write | User CBS setting for queue 6. |
| I32 mwrCbsQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.8 | Integer32 | read-write | User CBS setting for queue 7. |
| I32 mwrCbsQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.9 | Integer32 | read-write | User CBS setting for queue 8. |
| ROW mwrCbsQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.10 | RowStatus | read-write | The CBS table Row status. This object is used to apply all queue CBS settings simultaneously. |
| mwrWeightQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.9 | not-accessible | A table containing queue weight setting for each queue, the configuration corresponds to the egress QoS of radio port. | |
| mwrWeightQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1 | not-accessible | A table entry containing queue weight setting for each queue. | |
| QUE mwrWeightQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.1 | QueueType | not-accessible | Specifies queue weight index for each radio queue. |
| I32 mwrWeightQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.2 | Integer32 | read-write | Specifies queue weight value for queue 1. |
| I32 mwrWeightQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.3 | Integer32 | read-write | Specifies queue weight value for queue 2. |
| I32 mwrWeightQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.4 | Integer32 | read-write | Specifies queue weight value for queue 3. |
| I32 mwrWeightQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.5 | Integer32 | read-write | Specifies queue weight value for queue 4. |
| I32 mwrWeightQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.6 | Integer32 | read-write | Specifies queue weight value for queue 5. |
| I32 mwrWeightQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.7 | Integer32 | read-write | Specifies queue weight value for queue 6. |
| I32 mwrWeightQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.8 | Integer32 | read-write | Specifies queue weight value for queue 7. |
| I32 mwrWeightQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.9 | Integer32 | read-write | Specifies queue weight value for queue 8. |
| ROW mwrWeightQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.10 | RowStatus | read-write | The queue weight table Row status. This object is used to apply all queue weight settings simultaneously. |
| mwrQbsQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.10 | not-accessible | A table containing queue buffer size, the configuration corresponds to the egress QoS of radio port. | |
| mwrQbsQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1 | not-accessible | A table entry containing queue buffer size. | |
| QUE mwrQbsQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.1 | QueueType | not-accessible | Specifies QBS queue index for each radio queue. |
| I32 mwrQbsQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.2 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 1. |
| I32 mwrQbsQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.3 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 2. |
| I32 mwrQbsQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.4 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 3. |
| I32 mwrQbsQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.5 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 4. |
| I32 mwrQbsQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.6 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 5. |
| I32 mwrQbsQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.7 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 6. |
| I32 mwrQbsQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.8 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 7. |
| I32 mwrQbsQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.9 | Integer32 | read-write | Specifies queue buffer size (QBS) for queue 8. |
| ROW mwrQbsQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.10 | RowStatus | read-write | The queue buffer size (QBS) table Row status. This object is used to apply all queue QBS settings simultaneously. |
| mwrPolicyQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.11 | not-accessible | A table containing queue policy for each queue, the configuration corresponds to the egress QoS of radio port. | |
| mwrPolicyQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1 | not-accessible | A table entry containing queue policy for each queue. | |
| QUE mwrPolicyQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.1 | QueueType | not-accessible | Specifies queue policy index for each radio queue. |
| INT mwrPolicyQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.2 | INTEGER | read-write | User queue policy value for queue 1. |
| INT mwrPolicyQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.3 | INTEGER | read-write | User queue policy value for queue 2. |
| INT mwrPolicyQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.4 | INTEGER | read-write | User queue policy value for queue 3. |
| INT mwrPolicyQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.5 | INTEGER | read-write | User queue policy value for queue 4. |
| INT mwrPolicyQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.6 | INTEGER | read-write | User queue policy value for queue 5. |
| INT mwrPolicyQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.7 | INTEGER | read-write | User queue policy value for queue 6. |
| INT mwrPolicyQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.8 | INTEGER | read-write | User queue policy value for queue 7. |
| INT mwrPolicyQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.9 | INTEGER | read-write | User queue policy value for queue 8. |
| ROW mwrPolicyQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.10 | RowStatus | read-write | The queue policy table Row status. This object is used to apply all queue policy settings simultaneously. |
| mwrUserClassTable | 1.3.6.1.4.1.7262.4.5.9.1.1.12 | not-accessible | A table containing QOS user class settings, the configuration corresponds to the egress QoS of radio port. | |
| mwrUserClassEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1 | not-accessible | A table entry containing QOS user class settings. | |
| CLA mwrUserClassIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.1 | ClassType | not-accessible | Specifies user class queue index for each radio queue. |
| I32 mwrUserClassOffset | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.2 | Integer32 | read-write | Specifies user class offset value. |
| STR mwrUserClassValue | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.3 | DisplayString | read-write | Specifies user class value. |
| STR mwrUserClassMask | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.4 | DisplayString | read-write | Specifies user class mask. |
| mwrUserFlowTable | 1.3.6.1.4.1.7262.4.5.9.1.1.13 | not-accessible | A table containing QOS user flow settings, the configuration corresponds to the egress QoS of radio port. | |
| mwrUserFlowEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.13.1 | not-accessible | A table entry containing QOS user flow settings. | |
| FLO mwrUserFlowIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.1 | FlowType | not-accessible | Specifies user flow filter queue index for each queue. |
| STR mwrUserFlowFilter | 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.2 | DisplayString | read-write | Specifies user flow filter value for each queue. |
| mwrUserFlowMappingTable | 1.3.6.1.4.1.7262.4.5.9.1.1.14 | not-accessible | A table containing QOS user flow mapping settings in port isolation mode. | |
| mwrUserFlowMappingEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1 | not-accessible | A table entry containing QOS user flow mapping settings in port isolation mode. | |
| FLO mwrUserFlowMappingIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.1 | FlowType | not-accessible | Specifies user flow mapping index for each flow in port isolation mode. |
| ENA mwrUserFlowMappingState | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.2 | EnableType | read-write | Enables or disabled user flow mapping for a specific flow in port isolation mode. |
| QUE mwrUserFlowMapping1Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.3 | QueueType | read-write | Specifies the selected queue for gi01 in port isolation mode. |
| QUE mwrUserFlowMapping2Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.4 | QueueType | read-write | Specifies the selected queue for gi02 in port isolation mode. |
| QUE mwrUserFlowMapping3Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.5 | QueueType | read-write | Specifies the selected queue for gi03 in port isolation mode. |
| QUE mwrUserFlowMapping4Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.6 | QueueType | read-write | Specifies the selected queue for gi04 in port isolation mode. |
| ROW mwrUserFlowMappingRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.7 | RowStatus | read-write | Row status for user flow mapping in port isolation mode. |
| mwrUserFlowMappingBridgeModeTable | 1.3.6.1.4.1.7262.4.5.9.1.1.15 | not-accessible | A table containing QOS user flow mapping settings in bridge mode, the configuration corresponds to the egress QoS of radio port. | |
| mwrUserFlowMappingBridgeModeEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1 | not-accessible | A table entry containing QOS user flow mapping settings in bridge mode. | |
| FLO mwrUserFlowMappingBridgeModeIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.1 | FlowType | not-accessible | Specifies user flow mapping index for each flow in bridge mode. |
| ENA mwrUserFlowMappingBridgeModeState | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.2 | EnableType | read-write | Enables or disabled user flow mapping for a specific flow in bridge mode. |
| QUE mwrUserFlowMappingBridgeModeQ | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.3 | QueueType | read-write | Specifies the selected user flow mapping queue in bridge mode. |
| ROW mwrUserFlowMappingBridgeModeRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.4 | RowStatus | read-write | Row status for user flow mapping in bridge mode. |
| mwrEthThresholdAlarm | 1.3.6.1.4.1.7262.4.5.9.1.2 | |||
| mwrPortThresholdAlarmTable | 1.3.6.1.4.1.7262.4.5.9.1.2.1 | not-accessible | A table containing threshold alarms parameters. | |
| mwrPortThresholdAlarmEntry | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1 | not-accessible | A table entry containing threshold alarms parameters. | |
| I32 mwrPortThresholdAlarmIndex | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.1 | Integer32 | not-accessible | Index to Threshold alarm table. Instance 1 indicates Radio port. |
| STR mwrDroppedPktsThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.2 | DisplayString | read-write | This object configures the dropped packets threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command. |
| STR mwrOutBWUtilizationThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.3 | DisplayString | read-write | This object configures the BW utilization threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of BW threshold, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command |
| STR mwrThroughputThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.4 | DisplayString | read-write | This object configures the radio throughput threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of the throughput, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command |
| mwrRadioQThresholdAlarmTable | 1.3.6.1.4.1.7262.4.5.9.1.2.2 | not-accessible | A table of radio port queue based Threshold Alarm settings, the configuration corresponds to the egress QoS of radio port. | |
| mwrRadioQThresholdAlarmEntry | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1 | not-accessible | A table entry of queue based Threshold Alarm settings. | |
| QUE mwrRadioQThresholdAlarmIndex | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.1 | QueueType | read-only | A unique identifier for one of the 8 queues |
| STR mwrRadioQDepthThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.2 | DisplayString | read-write | The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded. |
| STR mwrRadioQDroppedPktsThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.3 | DisplayString | read-write | The threshold, in packets, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the number of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. |
| mwrEthernetStatus | 1.3.6.1.4.1.7262.4.5.9.2 | |||
| mwrEthernetPerformance | 1.3.6.1.4.1.7262.4.5.9.3 | |||
| mwrEnetPerfPortStatsTable | 1.3.6.1.4.1.7262.4.5.9.3.1 | not-accessible | A table containing Ethernet port statistics. | |
| mwrEnetPerfPortStatsEntry | 1.3.6.1.4.1.7262.4.5.9.3.1.1 | not-accessible | A table entry containing Ethernet port statistics. | |
| INT mwrEnetPortStatsIndex | 1.3.6.1.4.1.7262.4.5.9.3.1.1.1 | INTEGER | read-only | A table index to Ethernet ports. |
| C64 mwrPortStatsInOctetEx | 1.3.6.1.4.1.7262.4.5.9.3.1.1.2 | Counter64 | read-only | A 64-bit counter representing the incoming octets. |
| C64 mwrPortStatsInGoodPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.3 | Counter64 | read-only | A 64-bit counter representing the incoming good packets. |
| C64 mwrPortStatsInErrPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.4 | Counter64 | read-only | A 64-bit counter representing the incoming error packets. |
| C64 mwrPortStatsInDiscardPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.5 | Counter64 | read-only | A 64-bit counter representing the incoming discarded packets. |
| C64 mwrPortStatsOutOctets | 1.3.6.1.4.1.7262.4.5.9.3.1.1.6 | Counter64 | read-only | A 64-bit counter representing the outgoing octets. |
| C64 mwrPortStatsOutGoodPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.7 | Counter64 | read-only | A 64-bit counter representing the outgoing good packets. |
| C64 mwrPortStatsOutErrPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.8 | Counter64 | read-only | A 64-bit counter representing the outgoing error packets. |
| C64 mwrPortStatsOutDiscardPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.9 | Counter64 | read-only | A 64-bit counter representing the outgoing discarded packets. |
| I32 mwrPortStatsOutBwUtilization | 1.3.6.1.4.1.7262.4.5.9.3.1.1.10 | Integer32 | read-only | This object represents the ratio of egress data rate and the egress link capacity of the port. The value is represented in %. |
| I32 mwrPortStatsInBwUtilization | 1.3.6.1.4.1.7262.4.5.9.3.1.1.11 | Integer32 | read-only | This object represents the ratio of ingress data rate and the ingress link capacity of the port. The value is represented in %. |
| I32 mwrPortStatsInDataRate | 1.3.6.1.4.1.7262.4.5.9.3.1.1.12 | Integer32 | read-only | The Ethernet data rate coming into the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs |
| I32 mwrPortStatsThroughput | 1.3.6.1.4.1.7262.4.5.9.3.1.1.13 | Integer32 | read-only | The Ethernet data rate going out of the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs. |
| mwrEnetPerfPortStats32BitTable | 1.3.6.1.4.1.7262.4.5.9.3.2 | not-accessible | A table containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. | |
| mwrEnetPerfPortStats32BitEntry | 1.3.6.1.4.1.7262.4.5.9.3.2.1 | not-accessible | A table entry containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. | |
| INT mwrPortStats32BitIndex | 1.3.6.1.4.1.7262.4.5.9.3.2.1.1 | INTEGER | not-accessible | A table index to ports carrying Ethernet packets. |
| C32 mwrPortStatsInOctet32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.2 | Counter32 | read-only | A 32-bit counter representing the incoming octets. |
| C32 mwrPortStatsInGoodPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.3 | Counter32 | read-only | A 32-bit counter representing the incoming good packets. |
| C32 mwrPortStatsInErrPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.4 | Counter32 | read-only | A 32-bit counter representing the incoming error packets. |
| C32 mwrPortStatsInDiscardPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.5 | Counter32 | read-only | A 32-bit counter representing the incoming discarded packets. |
| C32 mwrPortStatsOutOctets32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.6 | Counter32 | read-only | A 32-bit counter representing the outgoing octets. |
| C32 mwrPortStatsOutGoodPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.7 | Counter32 | read-only | A 32-bit counter representing the outgoing good packets. |
| C32 mwrPortStatsOutErrPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.8 | Counter32 | read-only | A 32-bit counter representing the outgoing error packets. |
| C32 mwrPortStatsOutDiscardPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.9 | Counter32 | read-only | A 32-bit counter representing the outgoing discarded packets. |
| mwrEnetPerfRadioQStatsTable | 1.3.6.1.4.1.7262.4.5.9.3.3 | not-accessible | A table containing radio queue statistics. | |
| mwrEnetPerfRadioQStatsEntry | 1.3.6.1.4.1.7262.4.5.9.3.3.1 | not-accessible | A table entry containing radio queue statistics. | |
| QUE mwrRadioQStatsIndex | 1.3.6.1.4.1.7262.4.5.9.3.3.1.1 | QueueType | not-accessible | A unique value for each of the 8 queues. |
| C64 mwrRadioQStatsInGoodPkts | 1.3.6.1.4.1.7262.4.5.9.3.3.1.2 | Counter64 | read-only | The current count of packets in queues. |
| C64 mwrRadioQStatsInDiscardPkts | 1.3.6.1.4.1.7262.4.5.9.3.3.1.3 | Counter64 | read-only | The current count of packets received in queues that were discarded due to queue overflow. |
| I32 mwrRadioQStatsOutBwUtilization | 1.3.6.1.4.1.7262.4.5.9.3.3.1.4 | Integer32 | read-only | The ratio of egress data rate and user configured radio queue CIR. |
| I32 mwrRadioQStatsInDataRate | 1.3.6.1.4.1.7262.4.5.9.3.3.1.5 | Integer32 | read-only | The ingress data rate of the radio queue. |
| I32 mwrRadioQStatsThroughput | 1.3.6.1.4.1.7262.4.5.9.3.3.1.6 | Integer32 | read-only | The throughput of the radio queue. |
| mwrEnetPerfRadioQStats32BitTable | 1.3.6.1.4.1.7262.4.5.9.3.4 | not-accessible | A table containing 32-bit counters for radio queue statistics. | |
| mwrEnetPerfRadioQStats32BitEntry | 1.3.6.1.4.1.7262.4.5.9.3.4.1 | not-accessible | A table entry containing 32-bit counters for radio queue statistics. | |
| QUE mwrRadioQStats32BitIndex | 1.3.6.1.4.1.7262.4.5.9.3.4.1.1 | QueueType | not-accessible | A unique value for each of the 8 queues. |
| C32 mwrRadioQStatsInGoodPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.4.1.2 | Counter32 | read-only | A 32-bit counter representing the current count of packets in queues. |
| C32 mwrRadioQStatsDiscardPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.4.1.3 | Counter32 | read-only | A 32-bit counter representing the current count of packets received in queues that were discarded due to queue overflow . |
| mwrEthernetNotifications | 1.3.6.1.4.1.7262.4.5.9.4 | |||
| NTF mwrDroppedPktsThreshold | 1.3.6.1.4.1.7262.4.5.9.4.1 | This notification is raised when the ethernet packet drops in an interface has exceeded user set limit. | ||
| NTF mwrRadioQDroppedPktsThreshold | 1.3.6.1.4.1.7262.4.5.9.4.2 | This notification is raised when Ethernet packet drops over radio traffic queue has exceeded the user configured limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number. | ||
| NTF mwrRadioQDepthThreshold | 1.3.6.1.4.1.7262.4.5.9.4.3 | This notification is raised when the data buffered in the specific radio traffic queue has exceeded the user set limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number. | ||
| NTF mwrOutBWUtilizationThreshold | 1.3.6.1.4.1.7262.4.5.9.4.4 | This notification is raised when the out bandwidth utilization of an interface has exceeded the user configured limit. | ||
| NTF mwrThroughputThreshold | 1.3.6.1.4.1.7262.4.5.9.4.5 | This notification is raised when the throughput of an interface has exceeded the user configured limit. | ||
| mwrAcm | 1.3.6.1.4.1.7262.4.5.10 | |||
| mwrAcmConfigurations | 1.3.6.1.4.1.7262.4.5.10.1 | |||
| ENA mwrAcmManualMode | 1.3.6.1.4.1.7262.4.5.10.1.1 | EnableType | read-write | Enables or disables the Adaptive Coding Modulation (ACM) Manual Mode. |
| ENA mwrAcmState | 1.3.6.1.4.1.7262.4.5.10.1.2 | EnableType | read-write | Enables or disables the Adaptive Code Modulation (ACM). |
| I32 mwrAcmWaitToRestore | 1.3.6.1.4.1.7262.4.5.10.1.3 | Integer32 | read-write | This object configures the ACM wait to restore duration time in seconds. |
| mwrAcmModeTable | 1.3.6.1.4.1.7262.4.5.10.1.4 | not-accessible | A table containing available Adaptive Code Modulation (ACM) tx profiles. | |
| mwrAcmModeEntry | 1.3.6.1.4.1.7262.4.5.10.1.4.1 | not-accessible | A table entry containing available Adaptive Code Modulation (ACM) tx profiles. | |
| I32 mwrAcmModeIndex | 1.3.6.1.4.1.7262.4.5.10.1.4.1.1 | Integer32 | not-accessible | A unique value for each Adaptive Code Modulation (ACM) tx profile. |
| STR mwrAcmTxProfileName | 1.3.6.1.4.1.7262.4.5.10.1.4.1.2 | DisplayString | read-only | The Adaptive Code Modulation (ACM) tx profile name. |
| INT mwrAcmTxProfileRange | 1.3.6.1.4.1.7262.4.5.10.1.4.1.3 | INTEGER | read-write | Specifies the range for the Adaptive Code Modulation (ACM) TX Profile. |
| mwrAcmStatus | 1.3.6.1.4.1.7262.4.5.10.2 | |||
| mwrAcmStatusTable | 1.3.6.1.4.1.7262.4.5.10.2.1 | not-accessible | A table containing Adaptive Code Modulation (ACM) status. | |
| mwrAcmStatusEntry | 1.3.6.1.4.1.7262.4.5.10.2.1.1 | not-accessible | A table entry containing Adaptive Code Modulation (ACM) status. | |
| RAD mwrAcmStatusIndex | 1.3.6.1.4.1.7262.4.5.10.2.1.1.1 | RadioInstanceType | not-accessible | A unique value for each interface. |
| STR mwrAcmActualTxProfile | 1.3.6.1.4.1.7262.4.5.10.2.1.1.2 | DisplayString | read-only | A read-only string specifying the currently running ACM TX profile. |
| mwrAcmDiagnostics | 1.3.6.1.4.1.7262.4.5.10.3 | |||
| mwrAcmDiagTable | 1.3.6.1.4.1.7262.4.5.10.3.1 | not-accessible | A table containing ACM diagnostic settings. | |
| mwrAcmDiagEntry | 1.3.6.1.4.1.7262.4.5.10.3.1.1 | not-accessible | A table entry containing ACM diagnostic settings. | |
| RAD mwrAcmDiagIndex | 1.3.6.1.4.1.7262.4.5.10.3.1.1.1 | RadioInstanceType | not-accessible | A unique value for each radio channel if applicable. |
| INT mwrAcmDiagnose | 1.3.6.1.4.1.7262.4.5.10.3.1.1.2 | INTEGER | read-write | This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased. Poll the mwrAcmDiagnosticResult object to determine the results. |
| STR mwrAcmDiagnosticResult | 1.3.6.1.4.1.7262.4.5.10.3.1.1.3 | DisplayString | read-only | The result from ACM Diagnostic is read from this object. |
| mwrAcmNotifications | 1.3.6.1.4.1.7262.4.5.10.4 | |||
| NTF mwrAcmConfigMismatch | 1.3.6.1.4.1.7262.4.5.10.4.1 | This notification is raised when ACM configuration mismatch between the link partners. | ||
| NTF mwrAcmProfileLowered | 1.3.6.1.4.1.7262.4.5.10.4.2 | This notification is raised when system is executing ACM and working at a lower radio profile than the configured nominal radio profile. | ||
| NTF mwrAcmProfileChanged | 1.3.6.1.4.1.7262.4.5.10.4.3 | This notification is raised when system is executing in ACM and has changed the radio profile. | ||
| mwrAtpc | 1.3.6.1.4.1.7262.4.5.11 | |||
| mwrAtpcConfigurations | 1.3.6.1.4.1.7262.4.5.11.1 | |||
| mwrAtpcConfigurationsTable | 1.3.6.1.4.1.7262.4.5.11.1.1 | not-accessible | Table containing ATPC configurations. | |
| mwrAtpcConfigurationsEntry | 1.3.6.1.4.1.7262.4.5.11.1.1.1 | not-accessible | Table entry containing ATPC configurations. | |
| RAD mwrAtpcConfigIndex | 1.3.6.1.4.1.7262.4.5.11.1.1.1.1 | RadioInstanceType | not-accessible | A unique value for each of the radio channel instance. |
| ENA mwrAtpcState | 1.3.6.1.4.1.7262.4.5.11.1.1.1.2 | EnableType | read-write | Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled. |
| I32 mwrAtpcCoordinatedPower | 1.3.6.1.4.1.7262.4.5.11.1.1.1.3 | Integer32 | read-write | This object is the value at which the system will transmit if the ATPC and the coordinated power are enabled. This is only if the system is transmitting the maximum power for 5 minutes. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB. |
| ENA mwrAtpcCoordinatedPowerEnable | 1.3.6.1.4.1.7262.4.5.11.1.1.1.4 | EnableType | read-write | Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled. |
| I32 mwrAtpcMinTxPower | 1.3.6.1.4.1.7262.4.5.11.1.1.1.5 | Integer32 | read-write | Sets the minimum ATPC transmit power in dB x 10. |
| I32 mwrAtpcMaxTxPower | 1.3.6.1.4.1.7262.4.5.11.1.1.1.6 | Integer32 | read-write | Sets the maximum ATPC transmit power in dB x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power. |
| I32 mwrAtpcRslTarget | 1.3.6.1.4.1.7262.4.5.11.1.1.1.7 | Integer32 | read-write | This object configures Received Signal Level that should be maintained by the link by adjusting the transmit power when ATPC is enabled. |
| ENA mwrAtpcRslTargetUseDefault | 1.3.6.1.4.1.7262.4.5.11.1.1.1.8 | EnableType | read-write | When this object is enabled the default RSL target will be used instead of the configured mwrAtpcRslTarget. The mwrAtpcDefaultRslTarget displays the default value. |
| mwrAtpcStatus | 1.3.6.1.4.1.7262.4.5.11.2 | |||
| mwrAtpcStatusTable | 1.3.6.1.4.1.7262.4.5.11.2.1 | not-accessible | A table containing ATPC status. | |
| mwrAtpcStatusEntry | 1.3.6.1.4.1.7262.4.5.11.2.1.1 | not-accessible | A table entry containing ATPC status. | |
| RAD mwrAtpcStatusIndex | 1.3.6.1.4.1.7262.4.5.11.2.1.1.1 | RadioInstanceType | not-accessible | A unique value for each of the radio instance. |
| INT mwrAtpcRunningStatus | 1.3.6.1.4.1.7262.4.5.11.2.1.1.2 | INTEGER | read-only | Indicates the actual condition of ATPC: - disabled: Configuration is set to off. - disabledAuto: Feature was automatically disabled and is transmitting at coordinated power. - running: Feature is running normally. - runningToggling: Feature is toggling between maximum and minimum power to recover from a loss of mod sync. - suspended: Feature was suspended. - suspendedLostComm: Feature is suspended because communication is lost with peer ATPC. - suspendedRadioDown: Feature is suspended because the radio is down. - suspendedRadioMuted: Feature is suspended because the radio is muted. - suspendedRadioLoopback: Feature is suspended because the radio is in loopback mode. |
| I32 mwrAtpcDefaultRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.3 | Integer32 | read-only | This object is the default value of the Received Signal Level target when ATPC is enabled. |
| I32 mwrAtpcActualMinTxPower | 1.3.6.1.4.1.7262.4.5.11.2.1.1.4 | Integer32 | read-only | This object indicates the running configuration for ATPC min tx power. |
| I32 mwrAtpcActualMaxTxPower | 1.3.6.1.4.1.7262.4.5.11.2.1.1.5 | Integer32 | read-only | This object indicates the running configuration for ATPC max tx power. |
| I32 mwrAtpcActualCoordinatedPower | 1.3.6.1.4.1.7262.4.5.11.2.1.1.6 | Integer32 | read-only | This value is the running configuration of the coordinated power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB. |
| I32 mwrAtpcPeerRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.7 | Integer32 | read-only | This object is the peer Received Signal Level target when ATPC is enabled. |
| I32 mwrAtpcMinRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.8 | Integer32 | read-only | Represents the minimum RSL target value. |
| I32 mwrAtpcMaxRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.9 | Integer32 | read-only | Represents the maximum RSL target value. |
| I32 mwrAtpcPeerRsl | 1.3.6.1.4.1.7262.4.5.11.2.1.1.10 | Integer32 | read-only | This object represents the peer actual RSL value. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB |
| mwrAtpcNotifications | 1.3.6.1.4.1.7262.4.5.11.3 | |||
| NTF mwrAtpcConfigMismatch | 1.3.6.1.4.1.7262.4.5.11.3.1 | This notification is raised when ATPC configuration mismatch has occurred between link partners. | ||
| NTF mwrAtpcAutoDisabled | 1.3.6.1.4.1.7262.4.5.11.3.2 | This notification is raised when ATPC is automatically disabled due to coordinated power condition. When this notification is raised the radio will be transmitting at coordinated power. The mwrAtpcStatusIndex varbind indicates the radio instance. | ||
| mwrRadio | 1.3.6.1.4.1.7262.4.5.12 | |||
| mwrCompression | 1.3.6.1.4.1.7262.4.5.13 | |||
| mwrCompressionConfigurations | 1.3.6.1.4.1.7262.4.5.13.1 | |||
| I32 mwrBacRecordAvgPeriod | 1.3.6.1.4.1.7262.4.5.13.1.1 | Integer32 | read-write | Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds. |
| mwrBacTable | 1.3.6.1.4.1.7262.4.5.13.1.2 | not-accessible | Table containing Bandwidth Acceleration entries. | |
| mwrBacEntry | 1.3.6.1.4.1.7262.4.5.13.1.2.1 | not-accessible | Contains Bandwidth Acceleration entries. | |
| QUE mwrBacQIndex | 1.3.6.1.4.1.7262.4.5.13.1.2.1.1 | QueueType | not-accessible | A unique value for each of the 8 radio egress Queues. |
| ENA mwrBacQEnable | 1.3.6.1.4.1.7262.4.5.13.1.2.1.2 | EnableType | read-write | Configure queue compression state to disable/enable. |
| I32 mwrBacQBlockSize | 1.3.6.1.4.1.7262.4.5.13.1.2.1.3 | Integer32 | read-write | Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are |
| ENA mwrBacRecordLogging | 1.3.6.1.4.1.7262.4.5.13.1.2.1.4 | EnableType | read-write | Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog. |
| mwrHcQTable | 1.3.6.1.4.1.7262.4.5.13.1.3 | not-accessible | A table containing Header Compression settings for each queue, the configuration corresponds to the egress QoS of radio port. | |
| mwrHcQEntry | 1.3.6.1.4.1.7262.4.5.13.1.3.1 | not-accessible | A table entry containing Header Compression settings for each queue. | |
| QUE mwrHcQIndex | 1.3.6.1.4.1.7262.4.5.13.1.3.1.1 | QueueType | not-accessible | Specifies Header Compression queue index for each radio queue. |
| ENA mwrHcQ1 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.2 | EnableType | read-write | Enables or disables the Header Compression on queue 1. |
| ENA mwrHcQ2 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.3 | EnableType | read-write | Enables or disables the Header Compression on queue 2. |
| ENA mwrHcQ3 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.4 | EnableType | read-write | Enables or disables the Header Compression on queue 3. |
| ENA mwrHcQ4 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.5 | EnableType | read-write | Enables or disables the Header Compression on queue 4. |
| ENA mwrHcQ5 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.6 | EnableType | read-write | Enables or disables the Header Compression on queue 5. |
| ENA mwrHcQ6 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.7 | EnableType | read-write | Enables or disables the Header Compression on queue 6. |
| ENA mwrHcQ7 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.8 | EnableType | read-write | Enables or disables the Header Compression on queue 7. |
| ENA mwrHcQ8 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.9 | EnableType | read-write | Enables or disables the Header Compression on queue 8. |
| ROW mwrHcQRowStatus | 1.3.6.1.4.1.7262.4.5.13.1.3.1.10 | RowStatus | read-write | The Header Compression table Row Status. This object is used to apply Header Compression settings for all queues simultaneously. |
| mwrCompressionStatus | 1.3.6.1.4.1.7262.4.5.13.2 | |||
| mwrBacStatusTable | 1.3.6.1.4.1.7262.4.5.13.2.1 | not-accessible | Table containing Bandwidth Acceleration status entries. | |
| mwrBacStatusEntry | 1.3.6.1.4.1.7262.4.5.13.2.1.1 | not-accessible | Contains Bandwidth Acceleration status entries. | |
| QUE mwrBacStatusQIndex | 1.3.6.1.4.1.7262.4.5.13.2.1.1.1 | QueueType | not-accessible | A unique value for each of the 8 Queues. |
| STR mwrBacUncompressedRatio | 1.3.6.1.4.1.7262.4.5.13.2.1.1.2 | DisplayString | read-only | Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in to queue over specified average period in percentage. |
| STR mwrBacGain | 1.3.6.1.4.1.7262.4.5.13.2.1.1.3 | DisplayString | read-only | The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all compressed and uncompressed bytes calculated over an average period. |
| mwrCompressionNotifications | 1.3.6.1.4.1.7262.4.5.13.3 | |||
| mwrEvents | 1.3.6.1.4.1.7262.4.5.14 | |||
| mwrEventsConfigurations | 1.3.6.1.4.1.7262.4.5.14.1 | |||
| mwrEventConfigTable | 1.3.6.1.4.1.7262.4.5.14.1.1 | not-accessible | A table of alarm configuration | |
| mwrEventConfigEntry | 1.3.6.1.4.1.7262.4.5.14.1.1.1 | not-accessible | An entry of alarm configuration | |
| U32 mwrEventConfigIndex | 1.3.6.1.4.1.7262.4.5.14.1.1.1.1 | Unsigned32 | not-accessible | A unique value for each alarm. |
| U32 mwrEventInstanceIndex | 1.3.6.1.4.1.7262.4.5.14.1.1.1.2 | Unsigned32 | read-only | A unique value for each instance of an alarm. |
| INT mwrEventConfigSeverity | 1.3.6.1.4.1.7262.4.5.14.1.1.1.3 | INTEGER | read-write | The severity of the alarm as minor, major or critical. |
| STR mwrEventName | 1.3.6.1.4.1.7262.4.5.14.1.1.1.4 | DisplayString | read-only | Represents the event name. |
| ENA mwrAlarmConfigState | 1.3.6.1.4.1.7262.4.5.14.1.1.1.5 | EnableType | read-write | The state of the alarm which can be either enabled or disabled. |
| ENA mwrTrapConfigState | 1.3.6.1.4.1.7262.4.5.14.1.1.1.6 | EnableType | read-write | The state of the trap which can be either enabled or disabled. |
| ENA mwrLogEventState | 1.3.6.1.4.1.7262.4.5.14.1.1.1.7 | EnableType | read-write | This object is used to enable or disable logging the events. |
| mwrLogs | 1.3.6.1.4.1.7262.4.5.15 | |||
| mwrLogsConfigurations | 1.3.6.1.4.1.7262.4.5.15.1 | |||
| ENA mwrEventLogEnable | 1.3.6.1.4.1.7262.4.5.15.1.1 | EnableType | read-write | Indicates whether event log is enabled. |
| ENA mwrPerfmLogEnable | 1.3.6.1.4.1.7262.4.5.15.1.2 | EnableType | read-write | Indicates whether performance log is enabled. |
| STR mwrPerfmLogInterval | 1.3.6.1.4.1.7262.4.5.15.1.3 | DisplayString | read-write | Performance statistics are logged periodically by this interval. The interval can be up to 00:15:00 (15 minutes) and as short as 00:00:1 (1 seconds). |
| mwrSysLogServerTable | 1.3.6.1.4.1.7262.4.5.15.1.4 | not-accessible | The syslog server table. | |
| mwrSysLogServerEntry | 1.3.6.1.4.1.7262.4.5.15.1.4.1 | not-accessible | The syslog server table entry. | |
| I32 mwrSysLogServerIndex | 1.3.6.1.4.1.7262.4.5.15.1.4.1.1 | Integer32 | not-accessible | The syslog server table index. |
| ENA mwrSysLogEnable | 1.3.6.1.4.1.7262.4.5.15.1.4.1.2 | EnableType | read-write | Indicates whether sys log is enabled. |
| IPt mwrSysLogHostDomain | 1.3.6.1.4.1.7262.4.5.15.1.4.1.3 | InetAddressType | read-write | Indicates sys log host inet address type. Valid types are ipv4 or ipv6. |
| IP mwrSysLogHostAddress | 1.3.6.1.4.1.7262.4.5.15.1.4.1.4 | InetAddress | read-write | Indicates sys log host inet address octet string. |
| mwrPM | 1.3.6.1.4.1.7262.4.5.16 | |||
| mwrPMConfigurations | 1.3.6.1.4.1.7262.4.5.16.1 | |||
| mwrPmRspiThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.1 | not-accessible | Performance Monitoring table for Radio Synchronous Physical Interface thresholds. | |
| mwrPmRspiThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.1.1 | not-accessible | Contains entries for Radio Synchronous Physical Interface thresholds. | |
| RAD mwrPmRspiThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.1.1.1 | RadioInstanceType | not-accessible | Index to PM RSPI Threshold table. |
| I32 mwrPmRLT1 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.2 | Integer32 | read-write | Receive Level Threshold 1, represents the value of the first received power level threshold. |
| I32 mwrPmRLT2 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.3 | Integer32 | read-write | Receive Level Threshold 2, represents the value of the second received power level threshold. |
| I32 mwrPmRLT3 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.4 | Integer32 | read-write | Receive Level Threshold 3, represents the value of the third received power level threshold. |
| I32 mwrPmRLT4 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.5 | Integer32 | read-write | Receive Level Threshold 4, represents the value of the fourth received power level threshold. |
| I32 mwrPmTLT1 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.6 | Integer32 | read-write | Transmit Level Threshold 1, represents the value of the first transmitted power level threshold. |
| I32 mwrPmTLT2 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.7 | Integer32 | read-write | Transmit Level Threshold 2, represents the value of the second transmitted power level threshold. |
| ROW mwrPmRspiThrRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.1.1.8 | RowStatus | read-write | This object is used for applying all RSPI thresholds simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active. |
| mwrPmBwThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.2 | not-accessible | Performance monitoring out bandwidth utilization thresholds table. | |
| mwrPmBwThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.2.1 | not-accessible | Contains entries for performance monitoring out bandwidth utilization thresholds. | |
| I32 mwrPmBWThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.2.1.1 | Integer32 | not-accessible | Index to PM out BW Threshold table. Index 1 represents the radio port. |
| I32 mwrPmBWT1 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.2 | Integer32 | read-write | The performance monitoring out BW utilization threshold 1. |
| I32 mwrPmBWT2 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.3 | Integer32 | read-write | The performance monitoring out BW utilization threshold 2. |
| I32 mwrPmBWT3 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.4 | Integer32 | read-write | The performance monitoring out BW utilization threshold 3. |
| I32 mwrPmBWT4 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.5 | Integer32 | read-write | The performance monitoring out BW utilization threshold 4. |
| I32 mwrPmBWT5 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.6 | Integer32 | read-write | The performance monitoring out BW utilization threshold 5. |
| I32 mwrPmBWT6 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.7 | Integer32 | read-write | The performance monitoring out BW utilization threshold 6. |
| I32 mwrPmBWT7 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.8 | Integer32 | read-write | The performance monitoring out BW utilization threshold 7. |
| I32 mwrPmBWT8 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.9 | Integer32 | read-write | The performance monitoring out BW utilization threshold 8. |
| I32 mwrPmBWT9 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.10 | Integer32 | read-write | The performance monitoring out BW utilization threshold 9. |
| I32 mwrPmBWT10 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.11 | Integer32 | read-write | The performance monitoring out BW utilization threshold 10. |
| ROW mwrPmBWTRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.2.1.12 | RowStatus | read-write | This object is used for applying all PM bandwidth threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active. |
| mwrPmTpThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.3 | not-accessible | Performance monitoring throughput thresholds table. | |
| mwrPmTpThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.3.1 | not-accessible | Contains entries for performance monitoring throughput thresholds. | |
| I32 mwrPmTPThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.3.1.1 | Integer32 | not-accessible | Index to PM throughput Threshold table. Index 1 represents the radio port. |
| I32 mwrPmTPT1 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.2 | Integer32 | read-write | The performance monitoring throughput threshold 1. |
| I32 mwrPmTPT2 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.3 | Integer32 | read-write | The performance monitoring throughput threshold 2. |
| I32 mwrPmTPT3 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.4 | Integer32 | read-write | The performance monitoring throughput threshold 3. |
| I32 mwrPmTPT4 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.5 | Integer32 | read-write | The performance monitoring throughput threshold 4. |
| I32 mwrPmTPT5 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.6 | Integer32 | read-write | The performance monitoring throughput threshold 5. |
| I32 mwrPmTPT6 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.7 | Integer32 | read-write | The performance monitoring throughput threshold 6. |
| I32 mwrPmTPT7 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.8 | Integer32 | read-write | The performance monitoring throughput threshold 7. |
| I32 mwrPmTPT8 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.9 | Integer32 | read-write | The performance monitoring throughput threshold 8. |
| I32 mwrPmTPT9 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.10 | Integer32 | read-write | The performance monitoring throughput threshold 9. |
| I32 mwrPmTPT10 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.11 | Integer32 | read-write | The performance monitoring throughput threshold 10. |
| ROW mwrPmTPTRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.3.1.12 | RowStatus | read-write | This object is used for applying all PM throughput threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active. |
| mwrPmAdvThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.4 | not-accessible | The advanced performance monitoring thresholds table. | |
| mwrPmAdvThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.4.1 | not-accessible | The advanced performance monitoring thresholds entries. | |
| I32 mwrPmAdvThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.4.1.1 | Integer32 | not-accessible | The advanced performance monitoring thresholds table index. Index 1 represents the radio port. |
| I32 mwrPmAdvTxHitsT1 | 1.3.6.1.4.1.7262.4.5.16.1.4.1.2 | Integer32 | read-write | The advanced performance monitoring Tx hits threshold 1. |
| I32 mwrPmAdvRxHitsT1 | 1.3.6.1.4.1.7262.4.5.16.1.4.1.3 | Integer32 | read-write | The advanced performance monitoring Rx hits threshold 1. |
| ROW mwrPmAdvRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.4.1.4 | RowStatus | read-write | This object is used for applying all PM advanced threshold settings simultaneously. Set RowStatus to NotInService, make changes to all threshold values and then change back RowStatus to Active. |
| mwrPMStatus | 1.3.6.1.4.1.7262.4.5.16.2 | |||
| mwrPmRspiTable | 1.3.6.1.4.1.7262.4.5.16.2.1 | not-accessible | Performance Monitoring table for Radio Synchronous Physical Interface. | |
| mwrPmRspiEntry | 1.3.6.1.4.1.7262.4.5.16.2.1.1 | not-accessible | Contains information for Radio Synchronous Physical Interface. The table is indexed by the granularity period and by the interval number. 22 rows are always presents, 20 are the historical measurements for 16 intervals in the quarter granularity and 4 intervals in the 24 hours granularity period. 2 rows represent the current measures. | |
| RAD mwrPmRspiStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.1.1.1 | RadioInstanceType | not-accessible | A unique value for each of the radio instance. |
| NUM mwrPmRspiInterval | 1.3.6.1.4.1.7262.4.5.16.2.1.1.2 | PMIntervalType | not-accessible | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| I32 mwrPmRspiIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.1.1.3 | Integer32 | not-accessible | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. |
| T/F mwrPmRspiMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.1.1.4 | TruthValue | read-only | Any problem that invalidates the measurement. |
| INT mwrPmRspiMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.1.1.5 | INTEGER | read-only | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| I32 mwrPmRspiMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.1.1.6 | Integer32 | read-only | The interval duration in seconds. |
| I32 mwrPmRspiMeasTLTMMin | 1.3.6.1.4.1.7262.4.5.16.2.1.1.7 | Integer32 | read-only | The transmitted power level tide mark low value. |
| I32 mwrPmRspiMeasTLTMMax | 1.3.6.1.4.1.7262.4.5.16.2.1.1.8 | Integer32 | read-only | The transmitted power level tide mark high value. |
| I32 mwrPmRspiMeasTLTS1 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.9 | Integer32 | read-only | The number of seconds above the first transmitted power level threshold. |
| I32 mwrPmRspiMeasTLTS2 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.10 | Integer32 | read-only | The number of seconds above the second transmitted power level threshold. |
| I32 mwrPmRspiMeasRLTMMin | 1.3.6.1.4.1.7262.4.5.16.2.1.1.11 | Integer32 | read-only | The received power level tide mark low value. |
| I32 mwrPmRspiMeasRLTMMax | 1.3.6.1.4.1.7262.4.5.16.2.1.1.12 | Integer32 | read-only | The received power level tide mark high value. |
| I32 mwrPmRspiMeasRLTS1 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.13 | Integer32 | read-only | The number of seconds below the first received power level threshold. |
| I32 mwrPmRspiMeasRLTS2 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.14 | Integer32 | read-only | The number of seconds below the second received power level threshold. |
| I32 mwrPmRspiMeasRLTS3 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.15 | Integer32 | read-only | The number of seconds below the third received power level threshold. |
| I32 mwrPmRspiMeasRLTS4 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.16 | Integer32 | read-only | The number of seconds below the fourth received power level threshold. |
| mwrPmBWTable | 1.3.6.1.4.1.7262.4.5.16.2.2 | not-accessible | Table containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization. | |
| mwrPmBWEntry | 1.3.6.1.4.1.7262.4.5.16.2.2.1 | not-accessible | Table entries containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization. | |
| I32 mwrPmBWStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.2.1.1 | Integer32 | not-accessible | The performance monitoring out BW utilization measurements table index. Index 1 represents the radio port. |
| NUM mwrPmBWInterval | 1.3.6.1.4.1.7262.4.5.16.2.2.1.2 | PMIntervalType | not-accessible | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| I32 mwrPmBWIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.2.1.3 | Integer32 | not-accessible | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. |
| T/F mwrPmBWMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.2.1.4 | TruthValue | read-only | Any problem that invalidates the measurement. |
| INT mwrPmBWMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.2.1.5 | INTEGER | read-only | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| I32 mwrPmBWMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.2.1.6 | Integer32 | read-only | The interval duration in seconds. |
| I32 mwrPmMeasBWTS1 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.7 | Integer32 | read-only | The number of seconds above the first BW utilization threshold. |
| I32 mwrPmMeasBWTS2 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.8 | Integer32 | read-only | The number of seconds above the second BW utilization threshold. |
| I32 mwrPmMeasBWTS3 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.9 | Integer32 | read-only | The number of seconds above the third BW utilization threshold. |
| I32 mwrPmMeasBWTS4 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.10 | Integer32 | read-only | The number of seconds above the fourth BW utilization threshold. |
| I32 mwrPmMeasBWTS5 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.11 | Integer32 | read-only | The number of seconds above the fifth BW utilization threshold. |
| I32 mwrPmMeasBWTS6 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.12 | Integer32 | read-only | The number of seconds above the sixth BW utilization threshold. |
| I32 mwrPmMeasBWTS7 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.13 | Integer32 | read-only | The number of seconds above the seventh BW utilization threshold. |
| I32 mwrPmMeasBWTS8 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.14 | Integer32 | read-only | The number of seconds above the eighth BW utilization threshold. |
| I32 mwrPmMeasBWTS9 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.15 | Integer32 | read-only | The number of seconds above the ninth BW utilization threshold. |
| I32 mwrPmMeasBWTS10 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.16 | Integer32 | read-only | The number of seconds above the tenth BW utilization threshold. |
| mwrPmTPTable | 1.3.6.1.4.1.7262.4.5.16.2.3 | not-accessible | Table containing performance monitoring measurements in 15 min and 24 hrs intervals for throughput. | |
| mwrPmTPEntry | 1.3.6.1.4.1.7262.4.5.16.2.3.1 | not-accessible | Table entry containing performance monitoring throughput measurements in 15 min and 24 hrs intervals. | |
| I32 mwrPmTPStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.3.1.1 | Integer32 | not-accessible | The performance monitoring throughput measurements table index. Index 1 represents the radio port. |
| NUM mwrPmTPInterval | 1.3.6.1.4.1.7262.4.5.16.2.3.1.2 | PMIntervalType | not-accessible | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| I32 mwrPmTPIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.3.1.3 | Integer32 | not-accessible | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. |
| T/F mwrPmTPMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.3.1.4 | TruthValue | read-only | Any problem that invalidates the measurement. |
| INT mwrPmTPMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.3.1.5 | INTEGER | read-only | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| I32 mwrPmTPMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.3.1.6 | Integer32 | read-only | The interval duration in seconds. |
| I32 mwrPmMeasTPTS1 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.7 | Integer32 | read-only | The number of seconds above the first throughput threshold. |
| I32 mwrPmMeasTPTS2 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.8 | Integer32 | read-only | The number of seconds above the second throughput threshold. |
| I32 mwrPmMeasTPTS3 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.9 | Integer32 | read-only | The number of seconds above the third throughput threshold. |
| I32 mwrPmMeasTPTS4 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.10 | Integer32 | read-only | The number of seconds above the fourth throughput threshold. |
| I32 mwrPmMeasTPTS5 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.11 | Integer32 | read-only | The number of seconds above the fifth throughput threshold. |
| I32 mwrPmMeasTPTS6 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.12 | Integer32 | read-only | The number of seconds above the sixth throughput threshold. |
| I32 mwrPmMeasTPTS7 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.13 | Integer32 | read-only | The number of seconds above the seventh throughput threshold. |
| I32 mwrPmMeasTPTS8 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.14 | Integer32 | read-only | The number of seconds above the eighth throughput threshold. |
| I32 mwrPmMeasTPTS9 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.15 | Integer32 | read-only | The number of seconds above the ninth throughput threshold. |
| I32 mwrPmMeasTPTS10 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.16 | Integer32 | read-only | The number of seconds above the tenth throughput threshold. |
| mwrPmAdvTable | 1.3.6.1.4.1.7262.4.5.16.2.4 | not-accessible | The advanced performance monitoring measurements table. | |
| mwrPmAdvEntry | 1.3.6.1.4.1.7262.4.5.16.2.4.1 | not-accessible | The advanced performance monitoring measurements table entries. | |
| I32 mwrPmAdvStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.4.1.1 | Integer32 | not-accessible | The advanced performance monitoring measurements table index. Index 1 represents the radio port. |
| NUM mwrPmAdvInterval | 1.3.6.1.4.1.7262.4.5.16.2.4.1.2 | PMIntervalType | not-accessible | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| I32 mwrPmAdvIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.4.1.3 | Integer32 | not-accessible | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. |
| T/F mwrPmAdvMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.4.1.4 | TruthValue | read-only | Any problem that invalidates the measurement. |
| INT mwrPmAdvMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.4.1.5 | INTEGER | read-only | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| I32 mwrPmAdvMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.4.1.6 | Integer32 | read-only | The interval duration in seconds. |
| I32 mwrPmAdvTxCapPeak | 1.3.6.1.4.1.7262.4.5.16.2.4.1.7 | Integer32 | read-only | The number of bits per second peak transmitted capacity during the time interval. |
| I32 mwrPmAdvTxCapRatio | 1.3.6.1.4.1.7262.4.5.16.2.4.1.8 | Integer32 | read-only | The percentage of peak transmitted capacity referred to the total allowed capacity during the time interval. |
| I32 mwrPmAdvTxCapAvg | 1.3.6.1.4.1.7262.4.5.16.2.4.1.9 | Integer32 | read-only | The number of bits per second average transmitted capacity during the time interval. |
| I32 mwrPmAdvTxCapAvgRatio | 1.3.6.1.4.1.7262.4.5.16.2.4.1.10 | Integer32 | read-only | The percentage of average transmitted capacity during the time interval. |
| I32 mwrPmAdvTxCapHits | 1.3.6.1.4.1.7262.4.5.16.2.4.1.11 | Integer32 | read-only | The number of seconds where the transmitted capacity has overcome a configurable threshold during the time interval. |
| I32 mwrPmAdvRxCapPeak | 1.3.6.1.4.1.7262.4.5.16.2.4.1.12 | Integer32 | read-only | The number of bits per second peak received capacity during the time interval. |
| I32 mwrPmAdvRxCapRatio | 1.3.6.1.4.1.7262.4.5.16.2.4.1.13 | Integer32 | read-only | The percentage of peak received capacity referred to the total allowed capacity during the time interval. |
| I32 mwrPmAdvRxCapAvg | 1.3.6.1.4.1.7262.4.5.16.2.4.1.14 | Integer32 | read-only | The number of bits per second average received capacity during the time interval. |
| I32 mwrPmAdvRxCapHits | 1.3.6.1.4.1.7262.4.5.16.2.4.1.15 | Integer32 | read-only | The number of seconds where the received capacity has overcome a configurable threshold during the time interval. |
| mwrPMNotifications | 1.3.6.1.4.1.7262.4.5.16.3 | |||
| mwrUserMgmt | 1.3.6.1.4.1.7262.4.5.17 | |||
| mwrUserConfiguration | 1.3.6.1.4.1.7262.4.5.17.1 | |||
| mwrUserStatus | 1.3.6.1.4.1.7262.4.5.17.2 | |||
| mwrUserSessionTable | 1.3.6.1.4.1.7262.4.5.17.2.1 | not-accessible | A table of user sessions | |
| mwrUserSessionEntry | 1.3.6.1.4.1.7262.4.5.17.2.1.1 | not-accessible | User session entry | |
| INT mwrUserIndex | 1.3.6.1.4.1.7262.4.5.17.2.1.1.1 | INTEGER | not-accessible | A unique value for each user. |
| STR mwrUserName | 1.3.6.1.4.1.7262.4.5.17.2.1.1.2 | DisplayString | read-only | The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress. |
| STR mwrUserConnectionType | 1.3.6.1.4.1.7262.4.5.17.2.1.1.3 | DisplayString | read-only | Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment. |
| INT mwrUserConnectionState | 1.3.6.1.4.1.7262.4.5.17.2.1.1.4 | INTEGER | read-only | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system. |
| mwrUserNotifications | 1.3.6.1.4.1.7262.4.5.17.3 | |||
| NTF mwrUserSession | 1.3.6.1.4.1.7262.4.5.17.3.1 | This notification is raised when a change in the state of user access is recognized, a new user has logged in or an existing user has logged out. | ||
| NTF mwrUserLoginFailed | 1.3.6.1.4.1.7262.4.5.17.3.2 | This notification is raised when a user has failed to login. | ||
| NTF mwrUserAccountChanged | 1.3.6.1.4.1.7262.4.5.17.3.3 | This notification is raised when a change in user account information in the system is detected. | ||
| NTF mwrUserPasswordChanged | 1.3.6.1.4.1.7262.4.5.17.3.4 | This notification is raised when a user password has changed. | ||
| mwrModIdentity | 1.3.6.1.4.1.7262.4.5.1000 | This specifies the contact information and the revision tracking information for the MIB module version. |
RFC description
DragonWave Microwave Ethernet MIB for QoS class and flow management on microwave links.
Start monitoring DragonWave microwave radio (MWR) link equipment (Ethernet/system status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.