All MIBs › MRV-IN-REACH-CHASSIS-MIB
Category: Hardware Inventory, RMON
Description: Monitors MRV In-Reach chassis hardware inventory, slots, and module status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MRV-IN-REACH-CHASSIS-MIB?
MRV-IN-REACH-CHASSIS-MIB is a vendor-specific module for MRV Communications' In-Reach modular console/terminal server chassis, covering physical chassis inventory - slot occupancy, installed module types, and per-module operational status. It is squarely a hardware-inventory/status module: its monitoring value centers on whether a slot's installed module (such as a line card or power supply) is present and operating correctly, which is core hardware-health data. Given its naming alongside MRV-IN-REACH-ETHERNET-MIB and MRV-IN-REACH-CHARACTER-MIB, it likely cross-references those modules' data to build a complete per-slot device picture. It is part of MRV's proprietary In-Reach MIB family, used together with the Ethernet and character-mode companion modules. Typical deployment is data-center/NOC environments using modular MRV In-Reach chassis for out-of-band console access management, where an MRV-IN-REACH-CHASSIS-MIB download gives NOC staff a per-slot view of installed module health.
IPNetwork Monitor allows you to monitor SNMP objects defined in MRV-IN-REACH-CHASSIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MRV In-Reach modular console/terminal server chassis
Monitoring Examples
No sample objects were provided in this source excerpt, so specific table or leaf object names can't be honestly cited. Based on the module description, a plausible scenario would be polling a chassis slot table for installed module type and operational status to detect a failed or missing line card, but this can't be grounded in confirmed object names here.
What Can Be Monitored
- slot occupancy
- installed module type
- module operational status
- chassis inventory
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| MacAddress |
From MRV-IN-REACH-PRODUCT-DIVISION-MIB
| AddressType | |
| HardwareType | |
| IOType | |
| mrvInReachProductDivision | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| MAC basicBase802Address | 1.3.6.1.4.1.33.16.1.1 | MacAddress | read-only | Base IEEE 802 global address for the chassis. |
| MAC basicNewBase802Address | 1.3.6.1.4.1.33.16.1.4 | MacAddress | read-write | New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the MRV In-Reach System MIB. |
| INT basicSlot | 1.3.6.1.4.1.33.16.1.2 | INTEGER | read-only | Chassis slot number (slotIndex) of the system whose agent is supplying this MIB. |
| INT basicSlotNumber | 1.3.6.1.4.1.33.16.1.3 | INTEGER | read-only | Number of slots in the chassis. |
| controllerEntry | 1.3.6.1.4.1.33.16.4.1.1 | not-accessible | Values for a controller. | |
| INT controllerIndex | 1.3.6.1.4.1.33.16.4.1.1.2 | INTEGER | read-only | An index value that uniquely identifies a controller. |
| OID controllerNetwork | 1.3.6.1.4.1.33.16.4.1.1.3 | OBJECT IDENTIFIER | read-write | The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType. |
| controllerTable | 1.3.6.1.4.1.33.16.4.1 | not-accessible | A list of controller entries, one for each controller of each type on the local system. | |
| NET controllerType | 1.3.6.1.4.1.33.16.4.1.1.1 | NetworkType | read-only | The controller type. |
| INT firmwareUpdateCompletionStatus | 1.3.6.1.4.1.33.16.9.1.1.6 | INTEGER | read-only | This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted. |
| STR firmwareUpdateDefaultFileName | 1.3.6.1.4.1.33.16.9.1.1.2 | DisplayString | read-only | This variable when read will obtain the default file name from the target. |
| firmwareUpdateEntry | 1.3.6.1.4.1.33.16.9.1.1 | not-accessible | An entry in the table concerning the writing of firmware to a target I/O card. | |
| STR firmwareUpdateFileName | 1.3.6.1.4.1.33.16.9.1.1.3 | DisplayString | read-write | This variable contains the name of the file to be read from the flash memory card and written to the target. |
| INT firmwareUpdateMethod | 1.3.6.1.4.1.33.16.9.1.1.7 | INTEGER | read-write | This variable indicates the method of update of the firmware update attempt. |
| INT firmwareUpdateSlotIndex | 1.3.6.1.4.1.33.16.9.1.1.1 | INTEGER | read-only | This variable identifies the slot to which is to be the target of the firmware update. |
| INT firmwareUpdateState | 1.3.6.1.4.1.33.16.9.1.1.5 | INTEGER | read-only | This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is in process. |
| INT firmwareUpdateStatus | 1.3.6.1.4.1.33.16.9.1.1.4 | INTEGER | read-write | This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to 'execute' when firmwareUpdateFileName has not been written or when firmwareUpdateState is 'writing' causes bad value to be returned. |
| firmwareUpdateTable | 1.3.6.1.4.1.33.16.9.1 | not-accessible | Table of descriptive and status information concerning the writing of firmware to a target I/O card. | |
| interfaceEntry | 1.3.6.1.4.1.33.16.5.1.1 | not-accessible | Values for an interface. | |
| INT interfaceIndex | 1.3.6.1.4.1.33.16.5.1.1.1 | INTEGER | read-only | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| OID interfaceNetwork | 1.3.6.1.4.1.33.16.5.1.1.2 | OBJECT IDENTIFIER | read-write | The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType. |
| interfaceTable | 1.3.6.1.4.1.33.16.5.1 | not-accessible | A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system. | |
| portEntry | 1.3.6.1.4.1.33.16.3.4.1 | not-accessible | Values for an I/O card port. | |
| INT portIndex | 1.3.6.1.4.1.33.16.3.4.1.2 | INTEGER | read-only | An index value that uniquely identifies a port. |
| INT portIOCardOperStatus | 1.3.6.1.4.1.33.16.3.3 | INTEGER | read-only | Status of the I/O card relative to the function card in this slot. |
| SER portIOCardSerialNumber | 1.3.6.1.4.1.33.16.3.2 | SerialNumber | read-only | The MRV In-Reach serial number of the I/O card in this slot. |
| IOT portIOCardType | 1.3.6.1.4.1.33.16.3.1 | IOType | read-only | The hardware type of the I/O card in this slot. |
| portTable | 1.3.6.1.4.1.33.16.3.4 | not-accessible | A list of port entries, one for each port of each type on the slots I/O card. | |
| NET portType | 1.3.6.1.4.1.33.16.3.4.1.1 | NetworkType | read-only | The port type. |
| INT powerSupplyAdminAction | 1.3.6.1.4.1.33.16.8.1.1.2 | INTEGER | read-write | Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus. |
| GAU powerSupplyChassisWatts | 1.3.6.1.4.1.33.16.8.1.1.24 | Gauge | read-only | Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown. |
| GAU powerSupplyChassisWattsMax | 1.3.6.1.4.1.33.16.8.1.1.25 | Gauge | read-only | Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown. |
| powerSupplyEntry | 1.3.6.1.4.1.33.16.8.1.1 | not-accessible | Values for a chassis power supply. | |
| INT powerSupplyFanHistory | 1.3.6.1.4.1.33.16.8.1.1.17 | INTEGER | read-only | The status history of the power supply's fan. |
| INT powerSupplyFanStatus | 1.3.6.1.4.1.33.16.8.1.1.10 | INTEGER | read-only | The current status of the power supply's fan. |
| INT powerSupplyFirmwareVersion | 1.3.6.1.4.1.33.16.8.1.1.3 | INTEGER | read-only | Version number of power supply firmware. |
| INT powerSupplyHardwareInhibitHistory | 1.3.6.1.4.1.33.16.8.1.1.18 | INTEGER | read-only | The status history of the power supply's hardware inhibit. |
| INT powerSupplyHardwareInhibitStatus | 1.3.6.1.4.1.33.16.8.1.1.11 | INTEGER | read-only | The current status of the power supply's hardware inhibit. |
| INT powerSupplyHardwareType | 1.3.6.1.4.1.33.16.8.1.1.26 | INTEGER | read-only | The type of power supply. |
| INT powerSupplyIndex | 1.3.6.1.4.1.33.16.8.1.1.1 | INTEGER | read-only | An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis. |
| INT powerSupplyMinus12History | 1.3.6.1.4.1.33.16.8.1.1.14 | INTEGER | read-only | History of the -12 volt power from the power supply. |
| INT powerSupplyMinus12Status | 1.3.6.1.4.1.33.16.8.1.1.7 | INTEGER | read-only | Status of the -12 volt power from the power supply. |
| GAU powerSupplyMinus12Volts | 1.3.6.1.4.1.33.16.8.1.1.21 | Gauge | read-only | In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| INT powerSupplyPlus12History | 1.3.6.1.4.1.33.16.8.1.1.13 | INTEGER | read-only | History of the +12 volt power from the power supply. |
| INT powerSupplyPlus12Status | 1.3.6.1.4.1.33.16.8.1.1.6 | INTEGER | read-only | Status of the +12 volt power from the power supply. |
| GAU powerSupplyPlus12Volts | 1.3.6.1.4.1.33.16.8.1.1.20 | Gauge | read-only | In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| INT powerSupplyPlus5History | 1.3.6.1.4.1.33.16.8.1.1.12 | INTEGER | read-only | History of the +5 volt power from the power supply. |
| INT powerSupplyPlus5Status | 1.3.6.1.4.1.33.16.8.1.1.5 | INTEGER | read-only | Status of the +5 volt power from the power supply. |
| GAU powerSupplyPlus5Volts | 1.3.6.1.4.1.33.16.8.1.1.19 | Gauge | read-only | In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| INT powerSupplyRedundancyStatus | 1.3.6.1.4.1.33.16.8.1.1.4 | INTEGER | read-only | The current redundancy status of the power supply. |
| powerSupplyTable | 1.3.6.1.4.1.33.16.8.1 | not-accessible | A list of power supply entries. | |
| INT powerSupplyThermalShutdownHistory | 1.3.6.1.4.1.33.16.8.1.1.16 | INTEGER | read-only | The thermal shutdown history of the power supply. |
| INT powerSupplyThermalShutdownStatus | 1.3.6.1.4.1.33.16.8.1.1.9 | INTEGER | read-only | The current thermal shutdown status of the power supply. |
| INT powerSupplyThermalWarningHistory | 1.3.6.1.4.1.33.16.8.1.1.15 | INTEGER | read-only | The thermal warning history of the power supply. |
| INT powerSupplyThermalWarningStatus | 1.3.6.1.4.1.33.16.8.1.1.8 | INTEGER | read-only | The current thermal warning status of the power supply. |
| GAU powerSupplyWatts | 1.3.6.1.4.1.33.16.8.1.1.22 | Gauge | read-only | Watts of power currently drawn from this power supply. A value of 0 indicates unknown. |
| GAU powerSupplyWattsMax | 1.3.6.1.4.1.33.16.8.1.1.23 | Gauge | read-only | Maximum watts of power available from this power supply. A value of 0 indicates unknown. |
| segmentEntry | 1.3.6.1.4.1.33.16.2.1.1 | not-accessible | Values for a chassis segment. | |
| LET segmentIndex | 1.3.6.1.4.1.33.16.2.1.1.2 | Letter | read-only | An index value that uniquely identifies a segment. |
| segmentTable | 1.3.6.1.4.1.33.16.2.1 | not-accessible | A list of segment entries, one for each segment of each type on the chassis. | |
| NET segmentType | 1.3.6.1.4.1.33.16.2.1.1.1 | NetworkType | read-only | The segment type. |
| INT slotAdminAction | 1.3.6.1.4.1.33.16.7.1.1.2 | INTEGER | read-write | Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus. |
| MAC slotBase802Address | 1.3.6.1.4.1.33.16.7.1.1.16 | MacAddress | read-only | Base IEEE 802 global address for the slot. |
| MAC slotBoot802Address | 1.3.6.1.4.1.33.16.7.2.1.5 | MacAddress | read-only | IEEE 802 global address in use for bootstrap operation. |
| OCT slotBootAddress | 1.3.6.1.4.1.33.16.7.2.1.7 | OCTET STRING | read-only | The network address the system in the slot is using to identify itself for bootstrap operation. |
| ADR slotBootAddressType | 1.3.6.1.4.1.33.16.7.2.1.6 | AddressType | read-only | The type of network address contained in slotBootAddress. |
| GAU slotBootBlockNumber | 1.3.6.1.4.1.33.16.7.2.1.12 | Gauge | read-only | The current block number being transferred for bootstrap operation, zero if unknown or not applicable. |
| OID slotBootControlController | 1.3.6.1.4.1.33.16.6.1.1.4 | OBJECT IDENTIFIER | read-write | The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action. |
| slotBootControlEntry | 1.3.6.1.4.1.33.16.6.1.1 | not-accessible | Values for a chassis slot. | |
| INT slotBootControlFlagDumpBootpTftp | 1.3.6.1.4.1.33.16.6.2.1.3 | INTEGER | read-write | Control for performing dump over BOOTP/TFTP. |
| INT slotBootControlFlagDumpLocal | 1.3.6.1.4.1.33.16.6.2.1.9 | INTEGER | read-write | Control for performing dump from a local device. |
| INT slotBootControlFlagDumpMop | 1.3.6.1.4.1.33.16.6.2.1.12 | INTEGER | read-write | Control for performing dump over Digital's MOP. |
| INT slotBootControlFlagDumpRarpTftp | 1.3.6.1.4.1.33.16.6.2.1.18 | INTEGER | read-write | Control for performing dump over RARP/TFTP. |
| INT slotBootControlFlagDumpTftpDirect | 1.3.6.1.4.1.33.16.6.2.1.6 | INTEGER | read-write | Control for performing dump over direct TFTP. |
| INT slotBootControlFlagDumpXmop | 1.3.6.1.4.1.33.16.6.2.1.15 | INTEGER | read-write | Control for performing dump over MRV In-Reach extended MOP. |
| slotBootControlFlagEntry | 1.3.6.1.4.1.33.16.6.2.1 | not-accessible | Values for a boot control flag. | |
| INT slotBootControlFlagLoadBootpTftp | 1.3.6.1.4.1.33.16.6.2.1.1 | INTEGER | read-write | Control for performing load over BOOTP/TFTP. |
| INT slotBootControlFlagLoadLocal | 1.3.6.1.4.1.33.16.6.2.1.7 | INTEGER | read-write | Control for performing load from a local device. |
| INT slotBootControlFlagLoadMop | 1.3.6.1.4.1.33.16.6.2.1.10 | INTEGER | read-write | Control for performing load over Digital's MOP. |
| INT slotBootControlFlagLoadRarpTftp | 1.3.6.1.4.1.33.16.6.2.1.16 | INTEGER | read-write | Control for performing load over RARP/TFTP. |
| INT slotBootControlFlagLoadTftpDirect | 1.3.6.1.4.1.33.16.6.2.1.4 | INTEGER | read-write | Control for performing load over direct TFTP. |
| INT slotBootControlFlagLoadXmop | 1.3.6.1.4.1.33.16.6.2.1.13 | INTEGER | read-write | Control for performing load over MRV In-Reach extended MOP. |
| INT slotBootControlFlagParamBootpTftp | 1.3.6.1.4.1.33.16.6.2.1.2 | INTEGER | read-write | Control for performing parameter load over BOOTP/TFTP. |
| INT slotBootControlFlagParamLocal | 1.3.6.1.4.1.33.16.6.2.1.8 | INTEGER | read-write | Control for performing parameter load from a local device. |
| INT slotBootControlFlagParamMop | 1.3.6.1.4.1.33.16.6.2.1.11 | INTEGER | read-write | Control for performing parameter load over Digital's MOP. |
| INT slotBootControlFlagParamRarpTftp | 1.3.6.1.4.1.33.16.6.2.1.17 | INTEGER | read-write | Control for performing parameter load over RARP/TFTP. |
| INT slotBootControlFlagParamTftpDirect | 1.3.6.1.4.1.33.16.6.2.1.5 | INTEGER | read-write | Control for performing parameter load over direct TFTP. |
| INT slotBootControlFlagParamXmop | 1.3.6.1.4.1.33.16.6.2.1.14 | INTEGER | read-write | Control for performing parameter load over MRV In-Reach extended MOP. |
| slotBootControlFlagTable | 1.3.6.1.4.1.33.16.6.2 | not-accessible | A list of slot boot control source flag entries. | |
| INT slotBootControlIndex | 1.3.6.1.4.1.33.16.6.1.1.2 | INTEGER | read-only | An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot. |
| IP slotBootControlInternetAddress | 1.3.6.1.4.1.33.16.6.1.1.8 | IpAddress | read-write | The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action. |
| STR slotBootControlInternetDelimiter | 1.3.6.1.4.1.33.16.6.1.1.11 | DisplayString | read-write | The character separating the load file directory name from the file name. |
| STR slotBootControlInternetFile | 1.3.6.1.4.1.33.16.6.1.1.7 | DisplayString | read-write | The filename to request when loading an image via TFTP. |
| IP slotBootControlInternetGateway | 1.3.6.1.4.1.33.16.6.1.1.10 | IpAddress | read-write | The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action. |
| IP slotBootControlInternetServer | 1.3.6.1.4.1.33.16.6.1.1.9 | IpAddress | read-write | The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action. |
| STR slotBootControlMopFile | 1.3.6.1.4.1.33.16.6.1.1.6 | DisplayString | read-write | The software file name to request for down-line load of the server via MOP or XMOP. |
| OID slotBootControlNetwork | 1.3.6.1.4.1.33.16.6.1.1.5 | OBJECT IDENTIFIER | read-write | The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action. |
| INT slotBootControlSlot | 1.3.6.1.4.1.33.16.6.1.1.1 | INTEGER | read-only | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| INT slotBootControlStatus | 1.3.6.1.4.1.33.16.6.1.1.3 | INTEGER | read-write | The status of the entry. Set to 'disabled' to disable the entry. |
| INT slotBootControlStorageClientSlot | 1.3.6.1.4.1.33.16.6.3.1.1 | INTEGER | read-only | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| slotBootControlStorageEntry | 1.3.6.1.4.1.33.16.6.3.1 | not-accessible | Values for a chassis slot. | |
| CTR slotBootControlStorageFailures | 1.3.6.1.4.1.33.16.6.3.1.4 | Counter | read-only | The number of times a read from or write to a given Storage location failed |
| INT slotBootControlStorageServerSlot | 1.3.6.1.4.1.33.16.6.3.1.2 | INTEGER | read-only | An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex. |
| INT slotBootControlStorageStatus | 1.3.6.1.4.1.33.16.6.3.1.3 | INTEGER | read-only | The status of the entry. |
| slotBootControlStorageTable | 1.3.6.1.4.1.33.16.6.3 | not-accessible | A list of slot boot control Storage entries. | |
| slotBootControlTable | 1.3.6.1.4.1.33.16.6.1 | not-accessible | A list of slot boot control entries. | |
| OCT slotBootCrashCode | 1.3.6.1.4.1.33.16.7.2.1.13 | OCTET STRING | read-only | If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length. |
| slotBootEntry | 1.3.6.1.4.1.33.16.7.2.1 | not-accessible | Bootstrap status values for a chassis slot. | |
| STR slotBootFileName | 1.3.6.1.4.1.33.16.7.2.1.11 | DisplayString | read-only | The full name of the file in use for bootstrap operation. |
| IP slotBootGatewayAddress | 1.3.6.1.4.1.33.16.7.2.1.10 | IpAddress | read-only | The internet address of the router in use for bootstrap operation. |
| INT slotBootIfIndex | 1.3.6.1.4.1.33.16.7.2.1.2 | INTEGER | read-only | An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT slotBootIndex | 1.3.6.1.4.1.33.16.7.2.1.1 | INTEGER | read-only | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| OID slotBootNetwork | 1.3.6.1.4.1.33.16.7.2.1.3 | OBJECT IDENTIFIER | read-only | The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType. |
| INT slotBootProtocol | 1.3.6.1.4.1.33.16.7.2.1.4 | INTEGER | read-only | The protocol in use for bootstrap operation. |
| OCT slotBootServerAddress | 1.3.6.1.4.1.33.16.7.2.1.9 | OCTET STRING | read-only | The network address of the system supplying bootstrap services to the system in the slot. |
| ADR slotBootServerAddressType | 1.3.6.1.4.1.33.16.7.2.1.8 | AddressType | read-only | The type of network address contained in slotBootServerAddress. |
| INT slotBootstrapFirmwareRevision | 1.3.6.1.4.1.33.16.7.1.1.11 | INTEGER | read-only | The firmware revision level of the bootstrap ROM installed in the system in the slot. |
| slotBootTable | 1.3.6.1.4.1.33.16.7.2 | not-accessible | A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading | |
| slotControllerEntry | 1.3.6.1.4.1.33.16.7.3.1 | not-accessible | Values for a controller. | |
| INT slotControllerIndex | 1.3.6.1.4.1.33.16.7.3.1.2 | INTEGER | read-only | An index value that uniquely identifies a controller. |
| OID slotControllerNetwork | 1.3.6.1.4.1.33.16.7.3.1.3 | OBJECT IDENTIFIER | read-only | The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType. |
| slotControllerTable | 1.3.6.1.4.1.33.16.7.3 | not-accessible | A list of controller entries, one for each controller of each type in each slot. | |
| NET slotControllerType | 1.3.6.1.4.1.33.16.7.3.1.1 | NetworkType | read-only | The controller type. |
| INT slotDefaultNVS | 1.3.6.1.4.1.33.16.7.1.1.26 | INTEGER | read-write | Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect. |
| INT slotElementalFirmwareRevision | 1.3.6.1.4.1.33.16.7.1.1.12 | INTEGER | read-only | The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot. |
| slotEntry | 1.3.6.1.4.1.33.16.7.1.1 | not-accessible | Values for a chassis slot. | |
| INT slotHardwareRevision | 1.3.6.1.4.1.33.16.7.1.1.7 | INTEGER | read-only | This revision level of the function card hardware in the slot. |
| SER slotHardwareSerialNumber | 1.3.6.1.4.1.33.16.7.1.1.6 | SerialNumber | read-only | The MRV In-Reach serial number of the function card hardware in this slot. |
| HAR slotHardwareType | 1.3.6.1.4.1.33.16.7.1.1.5 | HardwareType | read-only | The type of hardware in the slot. |
| INT slotIndex | 1.3.6.1.4.1.33.16.7.1.1.1 | INTEGER | read-only | An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1. |
| INT slotIOCardHardwareVersion | 1.3.6.1.4.1.33.16.7.1.1.24 | INTEGER | read-only | Version number of I/O card in the slot. |
| INT slotIOCardOperStatus | 1.3.6.1.4.1.33.16.7.1.1.10 | INTEGER | read-only | Status of the I/O card relative to the function card in this slot. |
| SER slotIOCardSerialNumber | 1.3.6.1.4.1.33.16.7.1.1.9 | SerialNumber | read-only | The MRV In-Reach serial number of the I/O card in this slot. |
| IOT slotIOCardType | 1.3.6.1.4.1.33.16.7.1.1.8 | IOType | read-only | The hardware type of the I/O card in this slot. |
| IP slotIpAddress | 1.3.6.1.4.1.33.16.7.1.1.17 | IpAddress | read-only | An internet address to which the system in this slot might respond. May be one of many. |
| GAU slotLedNumber | 1.3.6.1.4.1.33.16.7.1.1.14 | Gauge | read-only | The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable. |
| OCT slotLedStatus | 1.3.6.1.4.1.33.16.7.1.1.15 | OCTET STRING | read-only | The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back. |
| INT slotMemorySize | 1.3.6.1.4.1.33.16.7.1.1.13 | INTEGER | read-only | The number of bytes of memory installed in the system in the slot. |
| INT slotMinus12Status | 1.3.6.1.4.1.33.16.7.1.1.20 | INTEGER | read-only | Status of the -12 volt power to the slot. |
| GAU slotMinus12Watts | 1.3.6.1.4.1.33.16.7.1.1.23 | Gauge | read-only | Tenths of watts of -12 volt power currently drawn by the slot. |
| INT slotOperStatus | 1.3.6.1.4.1.33.16.7.1.1.3 | INTEGER | read-only | Relative to the chassis, the current operating status of the system in the slot. |
| INT slotPlus12Status | 1.3.6.1.4.1.33.16.7.1.1.19 | INTEGER | read-only | Status of the +12 volt power to the slot. |
| GAU slotPlus12Watts | 1.3.6.1.4.1.33.16.7.1.1.22 | Gauge | read-only | Tenths of watts of +12 volt power currently drawn by the slot. |
| INT slotPlus5Status | 1.3.6.1.4.1.33.16.7.1.1.18 | INTEGER | read-only | Status of the +5 volt power to the slot. |
| GAU slotPlus5Watts | 1.3.6.1.4.1.33.16.7.1.1.21 | Gauge | read-only | Tenths of watts of +5 volt power currently drawn by the slot. |
| INT slotRestoreNVS | 1.3.6.1.4.1.33.16.7.1.1.25 | INTEGER | read-write | Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect. |
| GAU slotSecondsSinceReset | 1.3.6.1.4.1.33.16.7.1.1.4 | Gauge | read-only | The number of seconds since the system in the slot was last reset by hardware or software. |
| slotTable | 1.3.6.1.4.1.33.16.7.1 | not-accessible | A list of slot entries. | |
| xChassis | 1.3.6.1.4.1.33.16 | |||
| xChassisBasic | 1.3.6.1.4.1.33.16.1 | |||
| xController | 1.3.6.1.4.1.33.16.4 | |||
| xFirmwareUpdate | 1.3.6.1.4.1.33.16.9 | |||
| xInterface | 1.3.6.1.4.1.33.16.5 | |||
| xPort | 1.3.6.1.4.1.33.16.3 | |||
| xPowerSupply | 1.3.6.1.4.1.33.16.8 | |||
| xSegment | 1.3.6.1.4.1.33.16.2 | |||
| xSlot | 1.3.6.1.4.1.33.16.7 | |||
| xSlotBootControl | 1.3.6.1.4.1.33.16.6 |
RFC description
Monitors MRV In-Reach network equipment chassis, slots, and interfaces on Network 9000 platforms.
Start monitoring MRV In-Reach modular console/terminal server chassis with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.