MLB-MIB

All MIBs › MLB-MIB

Category: WAN

Description: Defines multi-link bundle interface management objects for aggregated WAN links.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MLB-MIB?

MLB-MIB (Radware's "rs" object prefix indicates a Radware-originated module) manages multi-link/load-balancing appliances that distribute application traffic across multiple servers and WAN links, despite the module's generic name suggesting simple link bundling. It exposes an application-server table tracking each server's address, name, weight, and operational mode, alongside proximity-tuning and DNS-based routing parameters used for global/link load balancing. Monitoring emphasis is squarely on server and link health: server operational status, attached-user counts, peak load, and frame rate/load counters reveal whether a back-end server or link is overloaded or has failed over. It is part of Radware's proprietary MIB tree and would typically be polled alongside standard interface MIBs for the underlying WAN link statistics. Typical deployment is enterprise or service-provider sites using Radware link/server load balancers for WAN link aggregation and global server load balancing. Engineers can download the MLB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MLB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Radware link/server load balancer
WAN link aggregation appliance

Monitoring Examples

An admin polls rsMLBApplicationServersTable (rsMLBServerEntry) to check rsMLBServerOperStatus and rsMLBServerAttachedUsersNumber for each server identified by rsMLBServerName/rsMLBServerAddr, watching rsMLBServerPeakLoad and rsMLBServerFramesRate/rsMLBServerFramesLoad for signs of overload. A change in rsMLBServerStatus or rsMLBServerOperMode combined with shifts in rsMLBProximity/rsMLBProximityTuning and rsMLBDNS would indicate a failover or a change in how proximity-based DNS is steering client traffic.

What Can Be Monitored

server operational status
server weight
attached users count
peak load / frame rate
proximity-based routing
DNS steering configuration

Imported Objects

From RADWARE-MIB

rsMLB

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
rsMLBApplicationServersTable	1.3.6.1.4.1.89.35.1.38.1		not-accessible	Table containing the list of application servers to which the clients requested are dispatched.
rsMLBApplicationServerEntry	1.3.6.1.4.1.89.35.1.38.1.1		not-accessible	The row definition for this table.
IP rsMLBServerAddr	1.3.6.1.4.1.89.35.1.38.1.1.1	IpAddress	read-only	Application IP address
STR rsMLBServerName	1.3.6.1.4.1.89.35.1.38.1.1.2	DisplayString	read-write	The name assigned by the user to the server.
INT rsMLBServerOperStatus	1.3.6.1.4.1.89.35.1.38.1.1.3	INTEGER	read-only	Operational status of application on server. active - server is active notInService - server is or will become inactive. Existing sessions will be redirected to other servers. noNewSessions - server will receive no new sessions. Existing sessions are allowed to complete.
INT rsMLBServerWeight	1.3.6.1.4.1.89.35.1.38.1.1.4	INTEGER	read-write	A numerical weight assigned by the user in order to impose some priority mechanism on the server dispatchers considerations of which server to choose for attaching a client .
INT rsMLBServerAttachedUsersNumber	1.3.6.1.4.1.89.35.1.38.1.1.5	INTEGER	read-only	Number of currently active users attached to this server.
INT rsMLBServerPeakLoad	1.3.6.1.4.1.89.35.1.38.1.1.6	INTEGER	read-only	Maximal number of frames per second dispatched to server since last reset.
INT rsMLBServerFramesRate	1.3.6.1.4.1.89.35.1.38.1.1.7	INTEGER	read-only	Number of frames per second dispatched to server.
CTR rsMLBServerFramesLoad	1.3.6.1.4.1.89.35.1.38.1.1.8	Counter	read-only	Number of frames per second dispatched to server.
INT rsMLBServerStatus	1.3.6.1.4.1.89.35.1.38.1.1.9	INTEGER	read-write	Administative status of appliaction on server.
INT rsMLBServerOperMode	1.3.6.1.4.1.89.35.1.38.1.1.10	INTEGER	read-write	This variable indicate the status of the server, the MLB will not send any messages to a backup server unless all other server are down status. In case of more then one backup server, the MLB will decide to which backup server to send the massages acordinf to rsMLBWeight.
INT rsMLBServerConnectionLimit	1.3.6.1.4.1.89.35.1.38.1.1.11	INTEGER	read-write	The maximal number of client sessions which can be opened on this sever.
INT rsMLBServerAdminStatus	1.3.6.1.4.1.89.35.1.38.1.1.12	INTEGER	read-write	Administrative status of application on server. enable - activates the server. The rsMLBServerOperStatus will change to active. disable - stops the server. The rsMLBServerOperStatus will change to notInService. shutdown - gracefully shuts down the server. The rsMLBServerOperStatus will change to noNewSessions.
INT rsMLBServerType	1.3.6.1.4.1.89.35.1.38.1.1.13	INTEGER	read-only	The type of Firewall. regular - indicates that the firewall is a regular server. nextHopRouter - the Firewall is a next hop in the router table.
INT rsMLBServerMacStatus	1.3.6.1.4.1.89.35.1.38.1.1.14	INTEGER	read-only	Indicates if the Mac address of the server was obtained. THe mac address is retrieve either from the Arp table or by sending Arp request. found - mac address was found notFound - mac address was not found
INT rsMLBServerPortNumber	1.3.6.1.4.1.89.35.1.38.1.1.15	INTEGER	read-only	The FireProof port this server is connected to
INT rsMLBServerPeakBytesLoad	1.3.6.1.4.1.89.35.1.38.1.1.16	INTEGER	read-only	Maximal number of bytes per second dispatched to server since last reset.
INT rsMLBServerBytesRate	1.3.6.1.4.1.89.35.1.38.1.1.17	INTEGER	read-only	Number of bytes per second dispatched to server.
CTR rsMLBServerBytesLoad	1.3.6.1.4.1.89.35.1.38.1.1.18	Counter	read-only	Number of bytes per second dispatched to server.
INT rsMLBServerRecoveryTime	1.3.6.1.4.1.89.35.1.38.1.1.19	INTEGER	read-write	Number of seconds after server initialization during which ISD won't send any requests.
INT rsMLBServerWarmUpTime	1.3.6.1.4.1.89.35.1.38.1.1.20	INTEGER	read-write	Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load.
CTR rsMLBServerTotalFramesLoad	1.3.6.1.4.1.89.35.1.38.1.1.21	Counter	read-only	Total number of frames dispatched to server.
INT rsMLBServerProximityCheck	1.3.6.1.4.1.89.35.1.38.1.1.22	INTEGER	read-write	Enable\Disable proximity check through this router.
INT rsMLBdummy1	1.3.6.1.4.1.89.35.1.38.1.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBAdminStatus	1.3.6.1.4.1.89.35.1.38.2	INTEGER	read-write	Enable/Disable server dispatcher.
INT rsMLBClientsLifeTime	1.3.6.1.4.1.89.35.1.38.3	INTEGER	read-write	Maximal period of time in seconds a non-active client is kept in the clients table.
INT rsMLBDispatchMethod	1.3.6.1.4.1.89.35.1.38.4	INTEGER	read-write	Type of dispatching required.
INT rsMLBCheckConnectivityStatus	1.3.6.1.4.1.89.35.1.38.5	INTEGER	read-write	Enable or Disable servers polling.
INT rsMLBCheckConnectivityMethod	1.3.6.1.4.1.89.35.1.38.6	INTEGER	read-write	This variable indicate the method the MLB check the connectivity. where the value 1 means check connectiotivity by ping, other value serve as a tcp port number.
INT rsMLBCheckConnectivityInterval	1.3.6.1.4.1.89.35.1.38.7	INTEGER	read-write	Polling interval in seconds for servers polling.
INT rsMLBCheckConnectivityRetries	1.3.6.1.4.1.89.35.1.38.8	INTEGER	read-write	This variable indicate the Minimal number of unsuccessful polling attempts before considering a server disconnected.
CTR rsMLBClientsConnectDenials	1.3.6.1.4.1.89.35.1.38.9	Counter	read-only	This variable indicate the Number of connection requests from clients that were denied by the the server dispatcher.
rsMLBClientsTable	1.3.6.1.4.1.89.35.1.38.10		not-accessible	Table containing the list of clients currently attached to a server.
rsMLBClientEntry	1.3.6.1.4.1.89.35.1.38.10.1		not-accessible	The row definition for this table.
IP rsMLBClientAddr	1.3.6.1.4.1.89.35.1.38.10.1.1	IpAddress	read-only	Client IP Address.
IP rsMLBDestinationAddr	1.3.6.1.4.1.89.35.1.38.10.1.2	IpAddress	read-write	IP Address of server currently serving this client.
IP rsMLBAttachedServerAddr	1.3.6.1.4.1.89.35.1.38.10.1.3	IpAddress	read-write	IP Address of server currently serving this client.
INT rsMLBClientLastActivityTime	1.3.6.1.4.1.89.35.1.38.10.1.4	INTEGER	read-only	Indicates when the last frame from the client was dispatched. Measured in seconds since device re-initialization.
INT rsMLBClientAttachmentTime	1.3.6.1.4.1.89.35.1.38.10.1.5	INTEGER	read-only	Indicates when the client was attached. Measured in seconds since device re-initialization.
INT rsMLBClientStatus	1.3.6.1.4.1.89.35.1.38.10.1.6	INTEGER	read-write	This variable indicates the administrative status of this entry. Used to delete an entry of this table.
INT rsMLBdummy2	1.3.6.1.4.1.89.35.1.38.10.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBSessionTracking	1.3.6.1.4.1.89.35.1.38.11	INTEGER	read-write	Enable or Disable session tracking. Usually, when working with Firewall we need to send the whole traffic of a specific session through the same Firewall. For this purpose we should keep track of the session and use the enable option. When working with routers, sending the whole traffic through the same Firewall is not necessary. Therefor there is no need to keep track of the sessions and we can use the disable option.
rsMLBRemoteConnectivityTable	1.3.6.1.4.1.89.35.1.38.12		not-accessible	Table containing the list of IPs which the connectivity check is performed on them.
rsMLBRemoteConnectivityEntry	1.3.6.1.4.1.89.35.1.38.12.1		not-accessible	The row definition for this table.
IP rsMLBRmtConSrvrAddr	1.3.6.1.4.1.89.35.1.38.12.1.1	IpAddress	read-only	Server IP address
IP rsMLBRmtConIpAddr	1.3.6.1.4.1.89.35.1.38.12.1.2	IpAddress	read-only	The IP address that the connectivity check will be performed on.
INT rsMLBRmtConStatus	1.3.6.1.4.1.89.35.1.38.12.1.3	INTEGER	read-write	Administative status of appliaction on the concection check IP address.
INT rsMLBRmtConOperStatus	1.3.6.1.4.1.89.35.1.38.12.1.4	INTEGER	read-only	Hold the operational status of the checked IP address.
INT rsMLBdummy3	1.3.6.1.4.1.89.35.1.38.12.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBClientTableMode	1.3.6.1.4.1.89.35.1.38.13	INTEGER	read-write	Determine the mode of keep entries in the client table. layer 3 means that entries are kept according to source Ip and destination IP layer 4 means that entries are kept according to source Ip, destination IP and ports
rsMLBRulesTable	1.3.6.1.4.1.89.35.1.38.14		not-accessible	Table containing the list of
rsMLBRulesEntry	1.3.6.1.4.1.89.35.1.38.14.1		not-accessible	The row definition for this table.
INT rsMLBRulesPortNumber	1.3.6.1.4.1.89.35.1.38.14.1.1	INTEGER	read-only
INT rsMLBRulesLeavingPort	1.3.6.1.4.1.89.35.1.38.14.1.2	INTEGER	read-write
INT rsMLBRulesNumOfServers	1.3.6.1.4.1.89.35.1.38.14.1.3	INTEGER	read-only
INT rsMLBdummy4	1.3.6.1.4.1.89.35.1.38.14.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBTranslateOutBoundMode	1.3.6.1.4.1.89.35.1.38.15	INTEGER	read-write	Translate FW NAT IP address to a virtual IP address for traffic that originated inside
rsMLBVirtualIPTable	1.3.6.1.4.1.89.35.1.38.16		not-accessible	The table for storing the VIP's
rsMLBVirtualIPEntry	1.3.6.1.4.1.89.35.1.38.16.1		not-accessible	The row definition for the VIP table
IP rsMLBVirtualIPAddress	1.3.6.1.4.1.89.35.1.38.16.1.1	IpAddress	read-only	The Virtual IP entry
INT rsMLBVirtualMode	1.3.6.1.4.1.89.35.1.38.16.1.2	INTEGER	read-write	The virtual IP mode - either backup/regular
INT rsMLBVirtualStatus	1.3.6.1.4.1.89.35.1.38.16.1.3	INTEGER	read-write	This variable indicates the administrative status of this entry.
INT rsMLBdummy5	1.3.6.1.4.1.89.35.1.38.16.2	INTEGER	read-only	Dummy variable for stopping getnext.
rsMLBMappedIPTable	1.3.6.1.4.1.89.35.1.38.17		not-accessible	The table for storing the mapped VIP entries
rsMLBMappedIPEntry	1.3.6.1.4.1.89.35.1.38.17.1		not-accessible	The row definition for the mapped table
IP rsMLBMappedVirtualAddress	1.3.6.1.4.1.89.35.1.38.17.1.1	IpAddress	read-only	The Virtual IP entry
IP rsMLBMappedFirewallIP	1.3.6.1.4.1.89.35.1.38.17.1.2	IpAddress	read-only	The firewall IP address
IP rsMLBMappedFirewallNAT	1.3.6.1.4.1.89.35.1.38.17.1.3	IpAddress	read-write	The firewall NAT IP address
INT rsMLBMappedStatus	1.3.6.1.4.1.89.35.1.38.17.1.4	INTEGER	read-write	This variable indicates the administrative status of this entry.
INT rsMLBdummy6	1.3.6.1.4.1.89.35.1.38.17.2	INTEGER	read-only	Dummy variable for stopping getnext.
IP rsMLBVirtualConnectivityIP	1.3.6.1.4.1.89.35.1.38.18	IpAddress	read-write	The virtual connectivity IP address
INT rsMLBVirtualConnectivityMode	1.3.6.1.4.1.89.35.1.38.19	INTEGER	read-write	The virtual IP mode - either backup/regular
INT rsMLBRemoveEntryAtSessionEnd	1.3.6.1.4.1.89.35.1.38.20	INTEGER	read-write	Remove client entry at session end.
INT rsMLBFirewallPortID	1.3.6.1.4.1.89.35.1.38.21	INTEGER	read-write	Identify Firewall not only by Mac but also by port
rsMLBSubnetGroupTable	1.3.6.1.4.1.89.35.1.38.23		not-accessible	Table containing the list of FW which belong to a particular destination subnet group.
rsMLBSubnetGroupEntry	1.3.6.1.4.1.89.35.1.38.23.1		not-accessible	The row definition for this table.
IP rsMLBDestSubnetAddr	1.3.6.1.4.1.89.35.1.38.23.1.1	IpAddress	read-only	Destination subnet address
IP rsMLBDestSubnetMask	1.3.6.1.4.1.89.35.1.38.23.1.2	IpAddress	read-only	Destination subnet mask.
IP rsMLBSubnetSrvrAddr	1.3.6.1.4.1.89.35.1.38.23.1.3	IpAddress	read-only	The IP address of the server that belong to the destination subnet group.
INT rsMLBSubnetSrvrStatus	1.3.6.1.4.1.89.35.1.38.23.1.4	INTEGER	read-write	Administrative status of the server.
INT rsMLBSubnetSrvrOperMode	1.3.6.1.4.1.89.35.1.38.23.1.5	INTEGER	read-write	define the operational mode (regular or backup) of the server in the subnet group
INT rsMLBdummy8	1.3.6.1.4.1.89.35.1.38.23.2	INTEGER	read-only	Dummy variable for stopping getnext.
rsMLBApplicationPortGroupTable	1.3.6.1.4.1.89.35.1.38.24		not-accessible	Table containing the list of FW which belong to a particular application port group.
rsMLBApplPortGroupEntry	1.3.6.1.4.1.89.35.1.38.24.1		not-accessible	The row definition for this table.
INT rsMLBApplPort	1.3.6.1.4.1.89.35.1.38.24.1.1	INTEGER	read-only	The application port of the group
IP rsMLBApplPortSrvrAddr	1.3.6.1.4.1.89.35.1.38.24.1.2	IpAddress	read-only	The IP address of the server that belong to the application port group.
INT rsMLBApplPortSrvrStatus	1.3.6.1.4.1.89.35.1.38.24.1.3	INTEGER	read-write	Administrative status of the server.
INT rsMLBApplPortSrvrOperMode	1.3.6.1.4.1.89.35.1.38.24.1.4	INTEGER	read-write	define the operational mode (regular or backup) of the server in the subnet group.
INT rsMLBdummy9	1.3.6.1.4.1.89.35.1.38.24.2	INTEGER	read-only	Dummy variable for stopping getnext.
rsMLBSrcSbntGroupTable	1.3.6.1.4.1.89.35.1.38.25		not-accessible	Table containing the list of FW which belong to a particular source subnet group.
rsMLBSrcSbntGroupEntry	1.3.6.1.4.1.89.35.1.38.25.1		not-accessible	The row definition for this table.
IP rsMLBSrcSbntAddr	1.3.6.1.4.1.89.35.1.38.25.1.1	IpAddress	read-only	Source subnet address
IP rsMLBSrcSbntMask	1.3.6.1.4.1.89.35.1.38.25.1.2	IpAddress	read-only	source subnet mask.
IP rsMLBSrcSbntSrvrAddr	1.3.6.1.4.1.89.35.1.38.25.1.3	IpAddress	read-only	The IP address of the server that belong to the source subnet group.
INT rsMLBSrcSbntSrvrStatus	1.3.6.1.4.1.89.35.1.38.25.1.4	INTEGER	read-write	Administrative status of the server.
INT rsMLBSrcSbntSrvrOperMode	1.3.6.1.4.1.89.35.1.38.25.1.5	INTEGER	read-write	define the operational mode (regular or backup) of the server in the source subnet group
INT rsMLBdummy10	1.3.6.1.4.1.89.35.1.38.25.2	INTEGER	read-only	Dummy variable for stopping getnext.
rsMLBNatTable	1.3.6.1.4.1.89.35.1.38.26		not-accessible	In this table the FP saves the NAT addresses.
rsMLBNatEntry	1.3.6.1.4.1.89.35.1.38.26.1		not-accessible	The row definition for this table.
IP rsMLBNatRouterAddress	1.3.6.1.4.1.89.35.1.38.26.1.1	IpAddress	read-only	The Router IP Address.
IP rsMLBNatAddress	1.3.6.1.4.1.89.35.1.38.26.1.2	IpAddress	read-only	The NAT IP Address.
INT rsMLBNatStatus	1.3.6.1.4.1.89.35.1.38.26.1.3	INTEGER	read-write	This variable indicates the administrative status of this entry.
INT rsMLBNatMode	1.3.6.1.4.1.89.35.1.38.26.1.4	INTEGER	read-write	The NAT mode - either backup/regular
INT rsMLBdummy11	1.3.6.1.4.1.89.35.1.38.26.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBFpNatStatus	1.3.6.1.4.1.89.35.1.38.27	INTEGER	read-write	Nat Status.
rsMLBStaticNatTable	1.3.6.1.4.1.89.35.1.38.28		not-accessible	In this table the FP saves the static NAT addresses.
rsMLBStaticNatEntry	1.3.6.1.4.1.89.35.1.38.28.1		not-accessible	The row definition for this table.
IP rsMLBStaticNatLclServerAddress	1.3.6.1.4.1.89.35.1.38.28.1.1	IpAddress	read-only	IP Address of the local machine whost IP address should be translated.
IP rsMLBStaticNatRouterAddress	1.3.6.1.4.1.89.35.1.38.28.1.2	IpAddress	read-only	The Router IP Address.
IP rsMLBStaticNatAddress	1.3.6.1.4.1.89.35.1.38.28.1.3	IpAddress	read-write	The Static NAT IP Address who is related to the local machine and router.
INT rsMLBStaticNatStatus	1.3.6.1.4.1.89.35.1.38.28.1.4	INTEGER	read-write	This variable indicates the administrative status of this entry.
INT rsMLBStaticNatMode	1.3.6.1.4.1.89.35.1.38.28.1.5	INTEGER	read-write	The Static NAT mode - either backup/regular
INT rsMLBdummy12	1.3.6.1.4.1.89.35.1.38.28.2	INTEGER	read-only	Dummy variable for stopping getnext.
rsMLBProximity	1.3.6.1.4.1.89.35.1.38.29
rsMLBStaticProximityTable	1.3.6.1.4.1.89.35.1.38.29.1		not-accessible	In this table the MLB saves the static proximity ranges per server farm IP Address
rsMLBStaticProximityEntry	1.3.6.1.4.1.89.35.1.38.29.1.1		not-accessible	The row definition for this table.
IP rsMLBStaticProximityRangeFrom	1.3.6.1.4.1.89.35.1.38.29.1.1.1	IpAddress	read-only	The IP Address of the low boundary of the interval.
IP rsMLBStaticProximityRangeTo	1.3.6.1.4.1.89.35.1.38.29.1.1.2	IpAddress	read-write	The IP Address of the high boundary of the interval.
INT rsMLBStaticProximityStatus	1.3.6.1.4.1.89.35.1.38.29.1.1.3	INTEGER	read-write	This variable indicate the Administative status of this entry. Use for delete an entry in this table.
IP rsMLBStaticProximityServer1	1.3.6.1.4.1.89.35.1.38.29.1.1.4	IpAddress	read-write	The first priority server that this range of clients will be redirected to
IP rsMLBStaticProximityServer2	1.3.6.1.4.1.89.35.1.38.29.1.1.5	IpAddress	read-write	The second priority server that this range of clients will be redirected to
IP rsMLBStaticProximityServer3	1.3.6.1.4.1.89.35.1.38.29.1.1.6	IpAddress	read-write	The third priority server that this range of clients will be redirected to
INT rsMLBProximityOperationMode	1.3.6.1.4.1.89.35.1.38.29.2	INTEGER	read-write	Allow proximity operation, and choose between operating only static proximity or dynamic proximity as well
IP rsMLBProximityMainDNS	1.3.6.1.4.1.89.35.1.38.29.3	IpAddress	read-write	The IP Address of the main DNS to be ignored in the proximity operation
IP rsMLBProximityBackupDNS	1.3.6.1.4.1.89.35.1.38.29.4	IpAddress	read-write	The IP Address of the backup DNS to be ignored in the proximity operation
INT rsMLBProximityAgingPeriod	1.3.6.1.4.1.89.35.1.38.29.5	INTEGER	read-write	The time in hours after which an old dynamic entry is invalid.
INT rsMLBProximityRetries	1.3.6.1.4.1.89.35.1.38.29.6	INTEGER	read-write	The number of tries for checking the client distance
INT rsMLBProximityTimeout	1.3.6.1.4.1.89.35.1.38.29.7	INTEGER	read-write	The timeout between proximity checks
rsMLBProximityTuning	1.3.6.1.4.1.89.35.1.38.29.8
INT rsMLBMaxDynEntries	1.3.6.1.4.1.89.35.1.38.29.8.1	INTEGER	read-only	Maximal number of entries in the dynamic proximity table.
INT rsMLBMaxDynEntriesAfterReset	1.3.6.1.4.1.89.35.1.38.29.8.2	INTEGER	read-write	Future maximal number of entries in the dynamic proximity table.
INT rsMLBProximityHopsWeight	1.3.6.1.4.1.89.35.1.38.29.9	INTEGER	read-write	The weight given to the clients hops distance in the dispatching decision
INT rsMLBProximityLatencyWeight	1.3.6.1.4.1.89.35.1.38.29.10	INTEGER	read-write	The weight given to the clients latency in the dispatching decision
INT rsMLBProximityLoadWeight	1.3.6.1.4.1.89.35.1.38.29.11	INTEGER	read-write	The weight given to the site load in the dispatching decision
rsMLBPrxyCheckFPIPTable	1.3.6.1.4.1.89.35.1.38.29.12		not-accessible	Table containing FP IP address for each server. This FP IP serves as the source IP for the proximity check packet which is send through this server.
rsMLBPrxyCheckFPIPEntry	1.3.6.1.4.1.89.35.1.38.29.12.1		not-accessible	The row definition for this table.
IP rsMLBRouterAddr	1.3.6.1.4.1.89.35.1.38.29.12.1.1	IpAddress	read-only	Server address
IP rsMLBFPIPAddr	1.3.6.1.4.1.89.35.1.38.29.12.1.2	IpAddress	read-write	FP IP address.
INT rsMLBPrxyCheckFPIPStatus	1.3.6.1.4.1.89.35.1.38.29.12.1.4	INTEGER	read-write	Administrative status of the row.
INT rsMLBdummy15	1.3.6.1.4.1.89.35.1.38.29.12.2	INTEGER	read-only	Dummy variable for stopping getnext.
rsMLBDNS	1.3.6.1.4.1.89.35.1.38.30
rsMLBDNSURLtoIPTable	1.3.6.1.4.1.89.35.1.38.30.1		not-accessible	The table for storing the IPs for URLs
rsMLBURLtoIPEntry	1.3.6.1.4.1.89.35.1.38.30.1.1		not-accessible	The row definition for IPs for URLs table
STR rsMLBURL	1.3.6.1.4.1.89.35.1.38.30.1.1.1	DisplayString	read-only	The URL address
IP rsMLBURLLocDeviceIP	1.3.6.1.4.1.89.35.1.38.30.1.1.2	IpAddress	read-write	The local device's IP
INT rsMLBURLStatus	1.3.6.1.4.1.89.35.1.38.30.1.1.3	INTEGER	read-write	This variable indicates the administrative status of this entry. Used to delete an entry of this table.
INT rsMLBdummy13	1.3.6.1.4.1.89.35.1.38.30.1.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBDNSttl	1.3.6.1.4.1.89.35.1.38.30.2	INTEGER	read-write	DNS time to live
INT rsMLBDNSTwoAnswers	1.3.6.1.4.1.89.35.1.38.30.3	INTEGER	read-write	Sending two DNS answers
rsMLBDNSVirtualTable	1.3.6.1.4.1.89.35.1.38.30.4		not-accessible	The table for DNS virtual IPs
rsMLBDNSVirtualEntry	1.3.6.1.4.1.89.35.1.38.30.4.1		not-accessible	The row definition for DNS virtual IPs table
IP rsMLBDNSVirtualIP	1.3.6.1.4.1.89.35.1.38.30.4.1.1	IpAddress	read-only	The DNS Virtual IP status
INT rsMLBDNSVirIPMode	1.3.6.1.4.1.89.35.1.38.30.4.1.2	INTEGER	read-write	The DNS Virtual IP mode (regular/backup)
INT rsMLBDNSStatus	1.3.6.1.4.1.89.35.1.38.30.4.1.3	INTEGER	read-write	This variable indicates the administrative status of this entry. Used to delete an entry of this table.
INT rsMLBdummy14	1.3.6.1.4.1.89.35.1.38.30.4.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsMLBSrcPortInClientHash	1.3.6.1.4.1.89.35.1.38.31	INTEGER	read-write	enable - client's source port is used in client table hashing, disable - only client IP and destination IP are used.
rsMLBAgingTimeTable	1.3.6.1.4.1.89.35.1.38.32		not-accessible	This table determine the aging time for specific applications.
rsMLBAgingTimeEntry	1.3.6.1.4.1.89.35.1.38.32.1		not-accessible	The row definition for this table.
INT rsMLBAgingTimeApplPort	1.3.6.1.4.1.89.35.1.38.32.1.1	INTEGER	read-only	Application port
INT rsMLBAgingTime	1.3.6.1.4.1.89.35.1.38.32.1.2	INTEGER	read-write	define the aging time for the aplication port in seconds
INT rsMLBAgingTimeStatus	1.3.6.1.4.1.89.35.1.38.32.1.3	INTEGER	read-write	Administrative status of the entry.
INT rsMLBdummy16	1.3.6.1.4.1.89.35.1.38.32.2	INTEGER	read-only	Dummy variable for stopping getnext.

RFC description

Monitors application server load balancing and dispatch status on Radware Vgate systems.

Start monitoring Radware link/server load balancer (WAN link aggregation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MLB-MIB

What Is MLB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description