MITEL-ROUTERGROUP-MIB

All MIBs › MITEL-ROUTERGROUP-MIB

Organization: MITEL Corporation

Last Updated: 2003-03-24

Category: IP Routing

Description: Manages MITEL router group configuration including static routes and policies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MITEL-ROUTERGROUP-MIB?

MITEL-ROUTERGROUP-MIB is a Mitel Networks proprietary MIB that manages router-group configuration — static routes and routing policies — on Mitel IP networking equipment, extending the mitelPropIpNetworking/mitelIpNetRouter branch established by Mitel's proprietary IP networking registration MIB. It exposes configuration-oriented objects for defining and managing routing groups, static route entries, and associated policy settings rather than raw traffic counters. Its monitoring value lies mainly in configuration/software status: confirming that static routes and router-group policies are correctly provisioned and active on the Mitel router/gateway, which affects whether voice and data traffic take the intended paths in a converged Mitel deployment. It explicitly depends on and extends the OID branch registered by MITEL-PROPIPNETWORKING-MIB. It is deployed on Mitel IP telephony/converged voice-data platforms with integrated IP routing functionality. Engineers can download the MITEL-ROUTERGROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MITEL-ROUTERGROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Mitel IP telephony/converged voice-data platforms with integrated routing (e.g., MiVoice Business controllers)

Monitoring Examples

The sample objects available (mitel, mitelProprietary, mitelPropIpNetworking, mitelIpNetRouter) are primarily OID-tree registration nodes for this module's router-group branch, so the provided metadata does not include specific route or policy table names to describe a concrete polling scenario. An admin would be expected to poll route and policy tables under mitelIpNetRouter to confirm static route provisioning, but the precise object names cannot be confirmed from the given sample_objects.

What Can Be Monitored

static route/policy configuration status (specific objects not confirmed in provided metadata)

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
mitel	1.3.6.1.4.1.1027
mitelProprietary	1.3.6.1.4.1.1027.4
mitelPropIpNetworking	1.3.6.1.4.1.1027.4.8
mitelIpNetRouter	1.3.6.1.4.1.1027.4.8.1
mitelRouterIpRouterGroup	1.3.6.1.4.1.1027.4.8.1.5			The MITEL Router MIB module.
mitelIpRouteTable	1.3.6.1.4.1.1027.4.8.1.5.1		not-accessible	This table is a list of IP Routing Entries.
mitelIpRouteEntry	1.3.6.1.4.1.1027.4.8.1.5.1.1		not-accessible	Each entry in this table contains information of an IP Route Entry.
IP mitelIpRouteTblDestAddress	1.3.6.1.4.1.1027.4.8.1.5.1.1.1	IpAddress	read-write	The IP address of the destination network
IP mitelIpRouteTblGateAddress	1.3.6.1.4.1.1027.4.8.1.5.1.1.2	IpAddress	read-write	The Destination Gateway IP address.
IP mitelIpRouteTblNetmaskAddress	1.3.6.1.4.1.1027.4.8.1.5.1.1.3	IpAddress	read-write	Specifies the netmask to apply to this network.
INT mitelIpRouteTblIfIndex	1.3.6.1.4.1.1027.4.8.1.5.1.1.4	INTEGER	read-write	Specifies the IfIndex to use as a key into the table. 0 & 1 are not used
I32 mitelIpRouteTblMetric1	1.3.6.1.4.1.1027.4.8.1.5.1.1.5	Integer32	read-write	Metric 1
I32 mitelIpRouteTblMetric2	1.3.6.1.4.1.1027.4.8.1.5.1.1.6	Integer32	read-write	Metric 2
I32 mitelIpRouteTblMetric3	1.3.6.1.4.1.1027.4.8.1.5.1.1.7	Integer32	read-write	Metric 3
I32 mitelIpRouteTblMetric4	1.3.6.1.4.1.1027.4.8.1.5.1.1.8	Integer32	read-write	Metric 4
I32 mitelIpRouteTblMetric5	1.3.6.1.4.1.1027.4.8.1.5.1.1.9	Integer32	read-write	Metric 5
I32 mitelIpRouteTblRouteType	1.3.6.1.4.1.1027.4.8.1.5.1.1.10	Integer32	read-write	Specifies what kind of route this is.
I32 mitelIpRouteTblRouteProto	1.3.6.1.4.1.1027.4.8.1.5.1.1.11	Integer32	read-write	Specifies what protocol to use for the routing table entry.
INT mitelIpRouteTblRouteAge	1.3.6.1.4.1.1027.4.8.1.5.1.1.12	INTEGER	read-write	Specifies the age of the route entry in the table.
INT mitelIpRouteTblBlockLearning	1.3.6.1.4.1.1027.4.8.1.5.1.1.13	INTEGER	read-write	If enabled will block the learned route in question
INT mitelIpRouteTblInUse	1.3.6.1.4.1.1027.4.8.1.5.1.1.14	INTEGER	read-write	Specifies whether this routing entry is in use or not
INT mitelIpRouteTblDisableLearned	1.3.6.1.4.1.1027.4.8.1.5.1.1.15	INTEGER	read-write	Determines whether learned routes should be disabled or not
INT mitelIpRouteTblConvertStatic	1.3.6.1.4.1.1027.4.8.1.5.1.1.16	INTEGER	read-write	An action to convert a learned route into a static route.
ROW mitelIpRouteTblRowStatus	1.3.6.1.4.1.1027.4.8.1.5.1.1.17	RowStatus	read-create	The current status of this entry.

RFC description

Manages IP routing entries and gateway configuration for MITEL router systems.

Start monitoring Mitel IP telephony/converged voice-data platform with integrated routing with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MITEL-ROUTERGROUP-MIB

What Is MITEL-ROUTERGROUP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description