MC-MIB

All MIBs › MC-MIB

Organization: VideoServer

Last Updated: 1998-07-20

Category: Domain: Telephony/VoIP, Domain: Video/Broadcast

Description: VideoServer multipoint conferencing MIB defining SNMP objects for managing video conferencing multipoint control unit (MCU) sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MC-MIB?

MC-MIB is a VideoServer enterprise MIB defining SNMP objects for managing a video conferencing Multipoint Control Unit (MCU), which bridges multiple video conferencing endpoints into a single multipoint session. Conceptually it would expose conference/session management data such as active conference identifiers, participant/port counts, and session state, alongside device-level status for the MCU hardware. Its use in monitoring centers on the software/service status of the conferencing platform: whether the MCU is running, how many conferences and ports are in use, and whether call setup or teardown is failing, which are the key operational health signals for this class of device. No sample objects were extracted for this module in this batch, so no specific object names can be cited. It would typically be deployed alongside other MIBs from the VideoServer/MCU product family and is used in enterprise or carrier video conferencing bridge deployments. Engineers can download the MC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

VideoServer multipoint control unit (MCU)
video conferencing bridge appliance

Monitoring Examples

No sample objects were provided for this module, so a concrete monitoring scenario with real object names cannot be honestly constructed here. In general terms, an administrator managing an MCU of this kind would want to track active conference/port utilization and call failure counts to detect capacity exhaustion or signaling problems, but this batch does not supply the specific object names needed to ground that example.

Imported Objects

From MULTI-MEDIA-MIB-TC

MmEndpointID
MmGatekeeperID
MmGlobalIdentifier
MmTAddressTag

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
RowStatus
TAddress
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
media	1.3.6.1.4.1.3011.2
h323MC	1.3.6.1.4.1.3011.2.2
mcConfig	1.3.6.1.4.1.3011.2.2.1
ADR mcConfigMcCallSignalingTag	1.3.6.1.4.1.3011.2.2.1.1	MmTAddressTag	read-only	The MC call signaling address tag.
ADR mcConfigMcCallSignalingAddress	1.3.6.1.4.1.3011.2.2.1.2	TAddress	read-only	The MC call signaling address.
ADR mcConfigGatekeeperAddressTag	1.3.6.1.4.1.3011.2.2.1.3	MmTAddressTag	read-write	The GK address tag.
ADR mcConfigGatekeeperAddress	1.3.6.1.4.1.3011.2.2.1.4	TAddress	read-write	The address of the gatekeeper that MC is registered with. The network manager may request MC to register with a particular GK by setting the GK address.
T/F mcConfigIsRegisteredWithGatekeeper	1.3.6.1.4.1.3011.2.2.1.5	TruthValue	read-write	This value indicates if MC is registered with the gatekeeper.
mcConference	1.3.6.1.4.1.3011.2.2.2
mcConferenceTable	1.3.6.1.4.1.3011.2.2.2.1		not-accessible	This table contains information about running conferences. It is a list of conference entries. The number of entries equals to the number of running conferences.
mcConferenceTableEntry	1.3.6.1.4.1.3011.2.2.2.1.1		not-accessible	It contains objects that describe the conferences.
OID mcConferenceConferenceId	1.3.6.1.4.1.3011.2.2.2.1.1.1	MmGlobalIdentifier	read-only	The conference identifier.
DAT mcConferenceConferenceStartTime	1.3.6.1.4.1.3011.2.2.2.1.1.2	DateAndTime	read-only	The conference start time.
DAT mcConferenceConferenceEndTime	1.3.6.1.4.1.3011.2.2.2.1.1.3	DateAndTime	read-only	The conference end time.
INT mcConferenceCentralizedOrDistributed	1.3.6.1.4.1.3011.2.2.2.1.1.4	INTEGER	read-only	This value indicates rather the conference is centralized or distributed.
INT mcConferenceUniOrMulticast	1.3.6.1.4.1.3011.2.2.2.1.1.5	INTEGER	read-only	This value indicates rather the conference is unicast or multicast.
ADR mcConferenceActiveMcAddress	1.3.6.1.4.1.3011.2.2.2.1.1.6	TAddress	read-only	The address of active MC. In case of cascading this value is different than MC's own address.
mcConferenceParticipantsTable	1.3.6.1.4.1.3011.2.2.2.2		not-accessible	This table contains information about conference participants. It is a list of participant entries. The number of entries equals to the sum of all participants for all conferences.
mcConferenceParticipantsTableEntry	1.3.6.1.4.1.3011.2.2.2.2.1		not-accessible	It contains objects that describe a conference participant.
I32 mcConferenceParticipantsTableIndex	1.3.6.1.4.1.3011.2.2.2.2.1.1	Integer32	read-only	An orbitrary index to this table. This index is one for the first participant for every given conference. It is incremented by one for each subsequent participant of the same conference. The last index for a particular conference is equal to the number of participants for that conference.
OCT mcConferenceParticipantsTerminalLabel	1.3.6.1.4.1.3011.2.2.2.2.1.2	OCTET STRING	read-only	The terminal label of this terminal.
ADR mcConferenceParticipantsCallSignalingtAddressTag	1.3.6.1.4.1.3011.2.2.2.2.1.3	MmTAddressTag	read-only	The terminal call signaling address type.
ADR mcConferenceParticipantsCallSignalingAddress	1.3.6.1.4.1.3011.2.2.2.2.1.4	TAddress	read-only	The terminal call signaling address.
OID mcConferenceParticipantsCallId	1.3.6.1.4.1.3011.2.2.2.2.1.5	MmGlobalIdentifier	read-only	The call identifier.
I32 mcConferenceParticipantsControlChannelIndex	1.3.6.1.4.1.3011.2.2.2.2.1.6	Integer32	read-only	The index to the control channel table in H.245 MIB.
I32 mcConferenceParticipantsNumberOfLogicalChannels	1.3.6.1.4.1.3011.2.2.2.2.1.7	Integer32	read-only	The number of logical channels that are used by this participant.
I32 mcConferenceParticipantsRtpSessionIndex	1.3.6.1.4.1.3011.2.2.2.2.1.8	Integer32	read-only	The index to the RTP session table in RTP MIB
mcStats	1.3.6.1.4.1.3011.2.2.3
I32 mcStatsTotalConferences	1.3.6.1.4.1.3011.2.2.3.1	Integer32	read-only	The total number of conferences since system start up time.
I32 mcStatsSuccessfullyCompletedConferences	1.3.6.1.4.1.3011.2.2.3.2	Integer32	read-only	The number of conferences that completed successfully.
I32 mcStatsAbnormalyTerminatedConferences	1.3.6.1.4.1.3011.2.2.3.3	Integer32	read-only	The number of conferences that were terminated abnormaly.
mcEvents	1.3.6.1.4.1.3011.2.2.4
INT lastConferenceTerminationReason	1.3.6.1.4.1.3011.2.2.4.1	INTEGER	read-only	This value identifys the reason for the conference termination.
OID lastTerminatedConferenceId	1.3.6.1.4.1.3011.2.2.4.2	MmGlobalIdentifier	read-only	The number of conferences that were terminated abnormaly.
NTF conferenceTermination	1.3.6.1.4.1.3011.2.2.4.3			This message will be sent on conference termination for the following reasons: 1 - normaly terminataed 2 - administratively terminated
mcMIBConformance	1.3.6.1.4.1.3011.2.2.5
mcMIBGroups	1.3.6.1.4.1.3011.2.2.5.1
configGroup	1.3.6.1.4.1.3011.2.2.5.1.1			.
conferenceGroup	1.3.6.1.4.1.3011.2.2.5.1.2			.
mcStatsGroup	1.3.6.1.4.1.3011.2.2.5.1.4			.
mcEventsGroup	1.3.6.1.4.1.3011.2.2.5.1.5			.
mcMIBCompliance	1.3.6.1.4.1.3011.2.2.5.2			The set of objects required for compliance.

RFC description

Manages H.323 Multimedia Controller (MC) objects including conference control, signaling addresses, gatekeeper registration, and statistics.

Start monitoring VideoServer multipoint control unit (MCU) / video conferencing bridge with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MC-MIB

What Is MC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description