HARMONIC-INC-NSG9000-MIB

All MIBs › HARMONIC-INC-NSG9000-MIB

Category: Domain: Video/Broadcast

Description: Manages Harmonic NSG9000 video gateway appliances, covering stream processing, encoding, and output configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HARMONIC-INC-NSG9000-MIB?

HARMONIC-INC-NSG9000-MIB is a vendor-specific MIB for Harmonic's NSG9000 network signal gateway, a video/broadcast headend appliance used for stream processing, encoding/transcoding, and video output configuration in cable/telco video distribution networks. Its sample objects show it is largely a trap/notification and OID-registration framework (hTrapForwardTable, hOids, hModuleOids, hPlatformOid) layering a generic Harmonic notification infrastructure over product-specific data, rather than an exhaustively detailed streaming-metrics MIB in itself. In monitoring terms, it's used to configure where the device forwards SNMP traps and to track how long ago the last trap was generated, giving operators software/fault-status visibility (is the device reporting alarms at all, and to whom) rather than deep hardware sensor data. It depends on Harmonic's shared enterprise MIB/trap framework across its product line (indicated by the generic hOids/hObjects/hModuleOids naming), reused across multiple Harmonic device models including the NSG9000. It's deployed in cable/IPTV headends and video-processing facilities managing Harmonic video gateway/encoding appliances. Network engineers evaluating or troubleshooting this functionality can download the HARMONIC-INC-NSG9000-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HARMONIC-INC-NSG9000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Harmonic NSG9000 video gateway/encoding appliance

Monitoring Examples

An operator would configure hTrapForwardTable/hTrapForwardEntry to add trap-destination entries (hTrapDestAddr) and check hTrapDestAddrStatus to confirm each forwarding destination is active. Checking hTrapTimeLastGenerated periodically would reveal whether the device has stopped generating any traps at all (possibly indicating an agent/monitoring problem) versus actively reporting events. The hOids/hModuleOids/hPlatformOid objects identify which specific sub-MIBs and platform variant (NSG9000) are active, useful for confirming the management station is polling the correct object definitions for this device model.

What Can Be Monitored

trap destination address configuration
trap destination active status
time since last trap generated
active platform/module OID identification

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
TimeTicks

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
harmonicInc	1.3.6.1.4.1.1563
hOids	1.3.6.1.4.1.1563.1
hModuleOids	1.3.6.1.4.1.1563.1.1
hSystemOid	1.3.6.1.4.1.1563.1.1.1
hPlatformOid	1.3.6.1.4.1.1563.1.1.2
hGbePortOid	1.3.6.1.4.1.1563.1.1.3
hSlotOid	1.3.6.1.4.1.1563.1.1.4
hRfModuleOid	1.3.6.1.4.1.1563.1.1.5
hRfPortOid	1.3.6.1.4.1.1563.1.1.6
hQamChannelOid	1.3.6.1.4.1.1563.1.1.7
hTraps	1.3.6.1.4.1.1563.1.2
NTF hPlatformTempFailTrap	1.3.6.1.4.1.1563.1.2.0.1			Temp Failure
NTF hPlatformVoltageFailTrap	1.3.6.1.4.1.1563.1.2.0.2			Voltage Failure
NTF hPlatformFan1FailTrap	1.3.6.1.4.1.1563.1.2.0.3			Fan 1 Failure
NTF hPlatformFan2FailTrap	1.3.6.1.4.1.1563.1.2.0.4			Fan 2 Failure
NTF hPlatformFan3FailTrap	1.3.6.1.4.1.1563.1.2.0.5			Fan 3 Failure
NTF hPlatformFan4FailTrap	1.3.6.1.4.1.1563.1.2.0.6			Fan 4 Failure
NTF hPlatformPS1VoltageFailTrap	1.3.6.1.4.1.1563.1.2.0.7			Power supply 1 Failure
NTF hPlatformPS2VoltageFailTrap	1.3.6.1.4.1.1563.1.2.0.8			Power supply 2 Failure
NTF hPlatformR6ConnLossTrap	1.3.6.1.4.1.1563.1.2.0.9			R6 connection lost
NTF hPlatformD6ConnLossTrap	1.3.6.1.4.1.1563.1.2.0.10			D6 connection lost
NTF hGbePortLinkDownTrap	1.3.6.1.4.1.1563.1.2.0.11			Gbe port link down
NTF hRfModuleHwFailTrap	1.3.6.1.4.1.1563.1.2.0.12			Rf module hw failure
NTF hRfModuleTempFailTrap	1.3.6.1.4.1.1563.1.2.0.13			Rf module temperature failure
NTF hRfPortHwFailTrap	1.3.6.1.4.1.1563.1.2.0.14			Rf port hw failure
NTF hRfPortTempFailTrap	1.3.6.1.4.1.1563.1.2.0.15			Rf port temperature failure
NTF hQamChanneOverflowTrap	1.3.6.1.4.1.1563.1.2.0.16			Qam channel overflow
NTF hServicePatMissing	1.3.6.1.4.1.1563.1.2.0.17			Service pat missing
NTF hServicePmtMissing	1.3.6.1.4.1.1563.1.2.0.18			Service pmt missing
NTF hSwitchToAlternateSource	1.3.6.1.4.1.1563.1.2.0.19			SDV service switch to alternate source
NTF hPassThroughSourceFailure	1.3.6.1.4.1.1563.1.2.0.20			Source Failure
NTF hPidRemuxSourceFailure	1.3.6.1.4.1.1563.1.2.0.21			Source Failure
NTF hDtiCardMissing	1.3.6.1.4.1.1563.1.2.0.22			DTI Card Missing
NTF hMcECMMissing	1.3.6.1.4.1.1563.1.2.0.23			ECM Missing
NTF hMcECMNearingExpiration	1.3.6.1.4.1.1563.1.2.0.24			ECM Nearing Expiration
NTF hMcECMExpired	1.3.6.1.4.1.1563.1.2.0.25			ECM Expired
NTF hDtiClientLinkDown	1.3.6.1.4.1.1563.1.2.0.26			DTI Client Link Down
NTF hDtiClientNotLocked	1.3.6.1.4.1.1563.1.2.0.27			DTI Client Not Locked
hObjects	1.3.6.1.4.1.1563.2
hSystem	1.3.6.1.4.1.1563.2.1
TIK hTrapTimeLastGenerated	1.3.6.1.4.1.1563.2.1.3	TimeTicks	read-only	The value of sysUpTime at the time the last trap was generated. This object can be used by the management station to determine whether traps were generated since the last poll.
hTrapForwardTable	1.3.6.1.4.1.1563.2.1.4		not-accessible	This table contains one row per event (trap) forwarding discriminator.
hTrapForwardEntry	1.3.6.1.4.1.1563.2.1.4.1		not-accessible	An entry in the Trap Forwarding Table contains information about a particular event forwarding discrminator (EFD). Each EFD specifies exactly one destination. Its discriminator construct always evaluates to TRUE value, i.e. all event reports pass a particualar EFD. This is the reason why discriminator construct are omitted.
IP hTrapDestAddr	1.3.6.1.4.1.1563.2.1.4.1.1	IpAddress	read-only	The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent. The value of this object uniquely identifies the trap destination.
INT hTrapDestAddrStatus	1.3.6.1.4.1.1563.2.1.4.1.2	INTEGER	read-write	The status of the table entry denotes both action and current states. Set-requests can carry the action values createAndGo(4) and destroy(6). Get-request always yields the current value active(1). In order for a management application to create an entry the Set-request with hlpTrapDestAddrStatus(createAndGo) variable binding must be sent to the agent. The instance ID part of the status variable will indicate the desired ip-address. In order for a management application to delete an entry the Set-request with hlpTrapDestAddrStatus(destroy) variable binding must be sent to the agent. Upon creation, the entry moves into active(1) state and stays in this state until deletion.
hTrapFields	1.3.6.1.4.1.1563.3
hAlarmStatus	1.3.6.1.4.1.1563.3.1
hAlarmSeverity	1.3.6.1.4.1.1563.3.2
hAlarmDesc	1.3.6.1.4.1.1563.3.3

RFC description

SNMP agent objects for Harmonic NSG9000 video delivery platform system and slot management.

Start monitoring Harmonic NSG9000 video gateway/encoding appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HARMONIC-INC-NSG9000-MIB

What Is HARMONIC-INC-NSG9000-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description