All MIBs › H150E-MIB
Organization: Siemens Communications
Last Updated: 2006-06-08
Category: Domain: Telephony/VoIP, Vendor: Siemens
Description: Siemens Communications H150E MIB for managing H.150 audio/video conferencing endpoint status and call parameters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is H150E-MIB?
H150E-MIB is a Siemens Communications MIB for the HiPath 3000 and Hicom 150E/H product line, PBX/communications systems that support H.150-style audio/video conferencing endpoints and telephony functions. It is expected to expose objects related to conferencing endpoint and call status, such as call state, active endpoint counts, and audio/video parameters for ongoing conference sessions, alongside general system identification data typical of Siemens PBX MIBs. Its monitoring relevance would center on software/service status of the communications platform -- tracking whether conferencing calls are established and healthy -- though specific hardware sensor data (temperature, power, fans) is not indicated by the available description. It likely depends on Siemens' broader HiPath/Hicom enterprise MIB structure and possibly the general H.221/H.323 conferencing standards for its data model. It is typically deployed on Siemens HiPath 3000 and Hicom 150E/H PBX systems in enterprise voice/video conferencing environments. Engineers can download the H150E-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in H150E-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Siemens HiPath 3000 PBX
- Siemens Hicom 150E/H PBX
Monitoring Examples
No sample object or table names are provided for this module (sample_objects is empty), and the module description is limited to 'HiPath 3000 and Hicom 150E/H MIB,' so a concrete polling scenario grounded in confirmed object names cannot be honestly given. Based on its stated purpose, it plausibly exposes call/conference session state and endpoint counters, but this cannot be confirmed from the supplied data.
What Can Be Monitored
- conference call/session status
- active conferencing endpoints
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| IpAddress |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT cardBoxNum | 1.3.6.1.4.1.231.7.2.9.3.6.1.2 | INTEGER | read-only | Index of the box where the card is placed. |
| STR cardCodeNumber | 1.3.6.1.4.1.231.7.2.9.3.6.1.6 | DisplayString | read-only | Contains the code number of the card software. |
| STR cardDescription | 1.3.6.1.4.1.231.7.2.9.3.6.1.5 | DisplayString | read-only | Textual card description. |
| INT cardIndex | 1.3.6.1.4.1.231.7.2.9.3.6.1.1 | INTEGER | read-only | Identification of an table entry enabled by this index. |
| INT cardSlotNum | 1.3.6.1.4.1.231.7.2.9.3.6.1.3 | INTEGER | read-only | Index of the slot where the card is placed. |
| INT cardState | 1.3.6.1.4.1.231.7.2.9.3.6.1.7 | INTEGER | read-only | Contains the state of the card. |
| STR cardType | 1.3.6.1.4.1.231.7.2.9.3.6.1.4 | DisplayString | read-only | Code for the type of the card. |
| STR extensionCodeNumber | 1.3.6.1.4.1.231.7.2.9.3.10.1.3 | DisplayString | read-only | Contains the code number of the hardware extension. |
| STR extensionDescription | 1.3.6.1.4.1.231.7.2.9.3.10.1.2 | DisplayString | read-only | Contains a textual desription of the hardware extension. |
| INT extensionIndex | 1.3.6.1.4.1.231.7.2.9.3.10.1.1 | INTEGER | read-only | Identification of an table entry enabled by this index. |
| INT featureCounter | 1.3.6.1.4.1.231.7.2.9.4.2.1.3 | INTEGER | read-only | This Counter indicates how often the feature was used since last system reload |
| STR featureDescription | 1.3.6.1.4.1.231.7.2.9.4.2.1.2 | DisplayString | read-only | Description of the feature. |
| INT featureIndex | 1.3.6.1.4.1.231.7.2.9.4.2.1.1 | INTEGER | read-only | Identification of an table entry enabled by this index. |
| INT featureStatTableReset | 1.3.6.1.4.1.231.7.2.9.4.3 | INTEGER | read-write | Enables reset (2) of all counters of the featureStatTable. |
| INT h150eAccessPort | 1.3.6.1.4.1.231.7.2.9.2.2.1.6 | INTEGER | read-only | Contains the local access port of the error. Local means that port numbering starts with 0 for each card. |
| INT h150eAccessSlot | 1.3.6.1.4.1.231.7.2.9.2.2.1.5 | INTEGER | read-only | Contains the access slot for the error. |
| INT h150eCdrBufferState | 1.3.6.1.4.1.231.7.2.9.1.9 | INTEGER | read-write | Use this object to delete the CDR buffer. |
| h150eCdrConfigGroup | 1.3.6.1.4.1.231.7.2.9.5 | |||
| INT h150eCdrElementSeparator | 1.3.6.1.4.1.231.7.2.9.5.2 | INTEGER | read-write | Separator between the different elements of one CDR: pipe (0x7c): '|' semicolon (0x3b): ';' blank (0x20): ' ' NOTE: no write access for blank |
| INT h150eCdrOutputMode | 1.3.6.1.4.1.231.7.2.9.5.10 | INTEGER | read-write | CDR (Call Detailed Record) output mode: V24-Port (1): the PABX is permanently connected over a V.24 connection to an extern application and sends each CDR immidiatly NOTE: no write access UPN-Port (2): the PABX is permanently connected over terminal adapter (PPM) connection to an extern application and sends each CDR immidiatly NOTE: no write access PCVPL-Port (3): the PEBX is permanently connected over a CorNet TS connection to an extern application (PCVPL) and sends each CDR immidiatly NOTE: no write access TFTP-Client (4): the PABX sends the collected CDRs to the administrated TFTP-Server TFTP-Server (5): an extern TFTP client can request the collected CDRs TCP-Client (6): the PABX is permanently connected to an extern TCP server and sends each CDR immidiatly NoOutput (7): no output for CDR |
| INT h150eCdrSeparator | 1.3.6.1.4.1.231.7.2.9.5.1 | INTEGER | read-write | Separator between following CDRs: DOS mode (1): CRLF UNIX mode (2): LF |
| IP h150eCdrTcpServerDestAddress | 1.3.6.1.4.1.231.7.2.9.5.8 | IpAddress | read-write | Destination IP addresse of CDR TCP server (only relevant for TCP client mode) |
| INT h150eCdrTcpServerDestPort | 1.3.6.1.4.1.231.7.2.9.5.9 | INTEGER | read-write | Destination TCP port of CDR TCP server (only relevant for TCP client mode) |
| INT h150eCdrTftpClientTimer | 1.3.6.1.4.1.231.7.2.9.5.7 | INTEGER | read-write | cycle time in minutes for initiating CDR output, max value 1439 minutes (23hours,59minutes) (only relevant for TFTP client mode) |
| INT h150eCdrTftpFileCounter | 1.3.6.1.4.1.231.7.2.9.5.4 | INTEGER | read-write | CDR (only relevant for TFTP client mode): For each transferred CDR-file a new filename is necassary filename: 'GDS.c' |
| IP h150eCdrTftpServerAlternateDestAddress | 1.3.6.1.4.1.231.7.2.9.5.6 | IpAddress | read-write | Alternate destination IP addresse of CDR TFTP server (only relevant for TFTP client mode): is the CDR TFTP Server not reachable the switch transfers CDR data to this alternative server |
| IP h150eCdrTftpServerDestAddress | 1.3.6.1.4.1.231.7.2.9.5.5 | IpAddress | read-write | Destination IP addresse of CDR TFTP server (only relevant for TFTP client mode) |
| INT h150eCdrThresholdValue | 1.3.6.1.4.1.231.7.2.9.5.3 | INTEGER | read-write | CDR buffer limit (only relevant for TFTP server mode): threshold value (in percent) for sending a CDR data notification trap recommended values: 0 to 80 |
| h150eControlGroup | 1.3.6.1.4.1.231.7.2.9.1 | |||
| STR h150eDescriptionOfLastCdrNotificationTrap | 1.3.6.1.4.1.231.7.2.9.5.13 | DisplayString | read-only | Textual description of last CDR notification trap sent by the device |
| INT h150eErrorClass | 1.3.6.1.4.1.231.7.2.9.2.2.1.3 | INTEGER | read-only | Contains the error class number (type of trap). |
| INT h150eErrorCode | 1.3.6.1.4.1.231.7.2.9.2.2.1.4 | INTEGER | read-only | Contains the error code. |
| DAT h150eErrorDateTime | 1.3.6.1.4.1.231.7.2.9.2.2.1.2 | DateAndTime | read-only | Time, when the error occurred. |
| STR h150eErrorDescription | 1.3.6.1.4.1.231.7.2.9.2.2.1.7 | DisplayString | read-only | Detailed information about errors. |
| h150eErrorHistoryEntry | 1.3.6.1.4.1.231.7.2.9.2.2.1 | not-accessible | The trap history table entries. | |
| h150eErrorHistoryGroup | 1.3.6.1.4.1.231.7.2.9.2 | |||
| h150eErrorHistoryTable | 1.3.6.1.4.1.231.7.2.9.2.2 | not-accessible | This table contains information about the errors that occured. | |
| INT h150eErrorIndex | 1.3.6.1.4.1.231.7.2.9.2.2.1.1 | INTEGER | read-only | Identification of an table entry enabled by this index. |
| INT h150eErrorSeverity | 1.3.6.1.4.1.231.7.2.9.2.2.1.8 | INTEGER | read-only | Contains the severity of the specific error. |
| h150eExtensionTable | 1.3.6.1.4.1.231.7.2.9.3.10 | not-accessible | This table contains information about the hardware extensions. | |
| h150eExtensionTableEntry | 1.3.6.1.4.1.231.7.2.9.3.10.1 | not-accessible | The extension table entries. | |
| h150eFeatureStatEntry | 1.3.6.1.4.1.231.7.2.9.4.2.1 | not-accessible | The feature statistics table entries. | |
| h150eFeatureStatTable | 1.3.6.1.4.1.231.7.2.9.4.2 | not-accessible | This table contains information about the usage of specific system features. It is designed to monitor the use of these features for a limited time only, because each counter is limited to one byte. | |
| INT h150eIndexOfLastCdrNotificationTrap | 1.3.6.1.4.1.231.7.2.9.5.11 | INTEGER | read-write | Index of last CDR notification trap sent by device Note: only reset possible (0) |
| h150eLanConnTable | 1.3.6.1.4.1.231.7.2.9.3.12 | not-accessible | This table contains information about the interfaces available for LAN access of the device or its cards. | |
| h150eLanConnTableEntry | 1.3.6.1.4.1.231.7.2.9.3.12.1 | not-accessible | The LAN connection table entries. | |
| INT h150eLoadLevel | 1.3.6.1.4.1.231.7.2.9.1.7 | INTEGER | read-only | The actual CPU load level (per cent). |
| INT h150eLogBufferState | 1.3.6.1.4.1.231.7.2.9.1.10 | INTEGER | read-write | Use this object to delete the log data. |
| h150eOffice | 1.3.6.1.4.1.231.7.2.9 | HiPath 3000 and Hicom 150E/H MIB. | ||
| h150ePortTable | 1.3.6.1.4.1.231.7.2.9.3.8 | not-accessible | This table contains information about the system ports. | |
| h150ePortTableEntry | 1.3.6.1.4.1.231.7.2.9.3.8.1 | not-accessible | The port table entries. | |
| INT h150eResetControl | 1.3.6.1.4.1.231.7.2.9.1.4 | INTEGER | read-write | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. When the device is running normally, this variable has a value of running(1). The effect of configuring this object is identical to the configuration of the probeResetControl object of RFC 2021, except for the coldBoot option which is not supported. |
| INT h150eShadowFlashState | 1.3.6.1.4.1.231.7.2.9.1.6 | INTEGER | read-write | This object informs about the state of the shadow flash memory area which is used to buffer a new software image that is being downloaded to the system. A download is only possible when the state is flashDeleted (1). It is not possible to download if the state is flashNotDeleted(2), nor if it's flashWriteProtected(3) (this means it is internally locked by software because the system is not in the state of accepting new flash data). If the flash memory is smaller than 8 MB ( flashTooSmall(4) ), no transfer is possible, too. It is possible to delete an inactive software image from the shadow flash area by setting deleteFlashNow (5). |
| h150eSlotTable | 1.3.6.1.4.1.231.7.2.9.3.6 | not-accessible | This table contains information about the system slots. | |
| h150eSlotTableEntry | 1.3.6.1.4.1.231.7.2.9.3.6.1 | not-accessible | The slot table entries. | |
| h150eStatisticsGroup | 1.3.6.1.4.1.231.7.2.9.4 | |||
| INT h150eSwitchoverState | 1.3.6.1.4.1.231.7.2.9.1.5 | INTEGER | read-write | The values readyForSwitchover (1) and notReadyForSwitchover (2) indicate whether the system is ready to be switched over to the new software that was downloaded to the shadow flash area, or not. If it is not passible, h150eShadowFlashState gives details on the reason. Setting this object to switchoverNow (3) causes the device to switchover immediately to the new software which was downloaded to the shadow flash area before and restart the system. initSwitchoverDelayed(4) causes a delayed switchover. |
| INT h150eSysState | 1.3.6.1.4.1.231.7.2.9.1.1 | INTEGER | read-write | The actual error state of the device. Contains the highest severity level of the recent error events. This object is updated automatically, but it can also be modified manually. |
| h150eSystemInfoGroup | 1.3.6.1.4.1.231.7.2.9.3 | |||
| INT h150eTrapRepetitions | 1.3.6.1.4.1.231.7.2.9.1.8 | INTEGER | read-write | The number of trap repetitions for error events marked as very important (log-and-multiple-trap). |
| h150eTrapSpecifications | 1.3.6.1.4.1.231.7.2.9.6 | |||
| INT h150etypeOfLastCdrNotificationTrap | 1.3.6.1.4.1.231.7.2.9.5.12 | INTEGER | read-only | Type of last CDR notification trap sent by the the device: (1) : error - CDR buffer overflow (2) : warning - CDR buffer is filled up over 80% (3) : notification - administrateable CDR buffer threshold is reached -> extern TFTP client has to get the collected CDRs (4) : warning - TCP Client couldn't reach administrated server (5) : warning - TFTP Client couldn't reach administrated server (6) : warning - TFTP Client couldn't reach administrated alternative server |
| IP hiPathAllServeServerIpAddress | 1.3.6.1.4.1.231.7.2.9.3.13 | IpAddress | read-only | IP address of the HiPath AllServe (Venus) server. |
| INT indexOfLastPortStatusNotificationTrap | 1.3.6.1.4.1.231.7.2.9.3.14 | INTEGER | read-write | Index of last 'port status change' notification trap sent by the device. Note: only reset possible (0) |
| STR lanConnDescription | 1.3.6.1.4.1.231.7.2.9.3.12.1.2 | DisplayString | read-only | Textual desription on the LAN connection. |
| INT lanConnIndex | 1.3.6.1.4.1.231.7.2.9.3.12.1.1 | INTEGER | read-only | Identification of an table entry enabled by this index. |
| IP lanConnIpAddress | 1.3.6.1.4.1.231.7.2.9.3.12.1.3 | IpAddress | read-only | IP address of the LAN connection. |
| INT lanConnStatus | 1.3.6.1.4.1.231.7.2.9.3.12.1.5 | INTEGER | read-only | Status of the LAN Connection. |
| IP lanConnSubnetMask | 1.3.6.1.4.1.231.7.2.9.3.12.1.4 | IpAddress | read-only | Subnet mask of the LAN connection. |
| INT numberOfErrorHistoryEntries | 1.3.6.1.4.1.231.7.2.9.2.1 | INTEGER | read-write | Contains the number of errors to be found in the error history table. This value can be used to delete the last x entries (reduce value by x) or to delete all entries (value = 0). |
| INT numberOfExtensionTableEntries | 1.3.6.1.4.1.231.7.2.9.3.9 | INTEGER | read-only | Contains the number of entries in the hardware extension table. |
| INT numberOfFeatureStatTableEntries | 1.3.6.1.4.1.231.7.2.9.4.1 | INTEGER | read-only | Contains the number of feature counters to be found in the table. |
| INT numberOfLanConnTableEntries | 1.3.6.1.4.1.231.7.2.9.3.11 | INTEGER | read-only | Contains the number of entries in the LAN connection table. |
| INT numberOfPortTableEntries | 1.3.6.1.4.1.231.7.2.9.3.7 | INTEGER | read-only | Contains the number of entries in the port table. |
| INT numberOfSlotTableEntries | 1.3.6.1.4.1.231.7.2.9.3.5 | INTEGER | read-only | Contains the number of entries in the slot table. |
| pn | 1.3.6.1.4.1.231.7.2 | |||
| INT portCardIndex | 1.3.6.1.4.1.231.7.2.9.3.8.1.2 | INTEGER | read-only | Reference to the card the port is assigned to. |
| INT portIndex | 1.3.6.1.4.1.231.7.2.9.3.8.1.1 | INTEGER | read-only | Identification of an table entry enabled by this index. |
| INT portLock | 1.3.6.1.4.1.231.7.2.9.3.8.1.5 | INTEGER | read-write | This object contains the lock state of the port. A software lock can be enabled / disabled. Possible state transitions: unlocked -> lockedBySoftware lockedByHardware -> lockedBySoftAndHardware lockedBySoftware -> unlocked lockedBySoftAndHardware -> lockedByHardware |
| INT portLogicalPortNumber | 1.3.6.1.4.1.231.7.2.9.3.8.1.6 | INTEGER | read-only | The logical port number. |
| INT portState | 1.3.6.1.4.1.231.7.2.9.3.8.1.4 | INTEGER | read-only | Contains the general state of the port. |
| STR portType | 1.3.6.1.4.1.231.7.2.9.3.8.1.3 | DisplayString | read-only | Contains the type of the port. |
| NTF sendAlarm | 1.3.6.1.4.1.231.7.2.9.6.1 | If an error occurs, there will be checked if the errorClass is configured to trigger an immediate signalling. If so, a trap will be send to the management station containing the information shown above. | ||
| NTF sendCdrNotification | 1.3.6.1.4.1.231.7.2.9.6.2 | The CDR notification trap is sent to trigger further actions by the management station, for instance download of CDR data. | ||
| NTF sendPortStatusNotification | 1.3.6.1.4.1.231.7.2.9.6.3 | The 'port status change' notification trap is sent to trigger a polling of the port table by a management station. It indicates one or more changes in port states. | ||
| NTF sendUmRelatedChangeNotification | 1.3.6.1.4.1.231.7.2.9.6.4 | This trap is sent (to UM proxy), as the system detects changes. | ||
| siemensUnits | 1.3.6.1.4.1.231.7 | |||
| sni | 1.3.6.1.4.1.231 | |||
| STR sysCodeNumber | 1.3.6.1.4.1.231.7.2.9.3.3 | DisplayString | read-only | Contains the code number of the system software. |
| STR sysHardwareVersion | 1.3.6.1.4.1.231.7.2.9.3.1 | DisplayString | read-only | Contains the version string of the system hardware. |
| STR sysHiPathBranding | 1.3.6.1.4.1.231.7.2.9.3.18 | DisplayString | read-only | Contains the branding string of the device. |
| STR sysHiPathSymbolSubInfo | 1.3.6.1.4.1.231.7.2.9.3.17 | DisplayString | read-only | Contains an URL to detailed symbol information in addition to the symbol information contained in the common mib object deviceSymbolInfo. |
| STR sysShadowSoftwareVersion | 1.3.6.1.4.1.231.7.2.9.3.16 | DisplayString | read-only | Contains the version string of the inactive (shadow) system software. This is the software image that has been transferred to the system without triggering the software switchover afterwards. |
| STR sysSnmpAgentVersion | 1.3.6.1.4.1.231.7.2.9.3.15 | DisplayString | read-only | Version number of the systems SNMP agent (formatting: x.y.z.) |
| INT sysSoftwareLocation | 1.3.6.1.4.1.231.7.2.9.3.4 | INTEGER | read-only | Contains location (address space) where the system software is currently running. |
| STR sysSoftwareVersion | 1.3.6.1.4.1.231.7.2.9.3.2 | DisplayString | read-only | Contains the version string of the system software. |
| INT sysTimezoneOffset | 1.3.6.1.4.1.231.7.2.9.3.19 | INTEGER | read-only | Timezone offset in minutes. |
| INT tftpDownloadAction | 1.3.6.1.4.1.231.7.2.9.1.3 | INTEGER | read-write | When this object is set to downloadAndImmediateSwitchover (2), the device will download the new software from the configured host. After the download is finished, the device will automatically restart with the new software. If downloadAndDelayedSwitchover (3) is specified, the new image is copied to the device. When the tftpDateTime value is matched, the device discontinues its normal operation and does the software switchover. After an automatic reset, it starts with the new system software. Setting downloadWithoutSwitchover (4) initiates a download without switching over to the new software. When the device is not downloading, this object will have a value of notDownloading(1). |
| DAT tftpSwitchoverDateTime | 1.3.6.1.4.1.231.7.2.9.1.2 | DateAndTime | read-write | Date and time for the switchover to the new system software. The configured time will be ignored, if the upgrade is started with the downloadAndImmediateSwitchover define of the tftpDownloadAction object. octet format: field octets contents range hex (range dez) ----- ------ -------- --------- ---------- 1 1-2 year 00 00 - FF FF (0 - 65536) 2 3 month 01 - 0C (1 - 12) 3 4 day 01 - 1F (1 - 31) 4 5 hour 00 - 17 (0 - 23) 5 6 minutes 00 - 3B (0 - 59) 6 7 seconds 00 - 3B (0 - 60) 7 8 deci-seconds 00 - 09 (0 - 9) For example, to configure Wednesday June 16, 1999 at 8:30:15 AM would be configured as 07 cf 06 10 08 1E 0F 00 |
| STR umCfssTarget | 1.3.6.1.4.1.231.7.2.9.8.5.1.10 | DisplayString | read-only | The target for Call Forwarding for Station out of Service. |
| INT umClassOfService | 1.3.6.1.4.1.231.7.2.9.8.5.1.8 | INTEGER | read-only | Classes of service can be used to restrict external calls. The types of calls that can be made from each station are defined for this purpose. |
| INT umDefaultLanguage | 1.3.6.1.4.1.231.7.2.9.8.3 | INTEGER | read-only | Default language |
| STR umDIDNumber | 1.3.6.1.4.1.231.7.2.9.8.5.1.3 | DisplayString | read-only | The DID number of the subscriber. |
| INT umDisplayLanguage | 1.3.6.1.4.1.231.7.2.9.8.5.1.9 | INTEGER | read-only | Display language |
| STR umDisplayName | 1.3.6.1.4.1.231.7.2.9.8.5.1.5 | DisplayString | read-only | The display name of the subscriber. |
| STR umE164Number | 1.3.6.1.4.1.231.7.2.9.8.5.1.4 | DisplayString | read-only | The E.164 call number of the subscriber. |
| STR umInternalCallNumber | 1.3.6.1.4.1.231.7.2.9.8.5.1.2 | DisplayString | read-only | The internal call number of the subscriber. |
| INT umLogicalPortNumber | 1.3.6.1.4.1.231.7.2.9.8.5.1.1 | INTEGER | read-only | The logical port number of the subscriber. |
| STR umNetworkElementKey | 1.3.6.1.4.1.231.7.2.9.8.8 | DisplayString | read-only | A key that uniquely identifies the node towards UM. For a HiPath 3000/5000 this would be the IP-address, A simulator should additionally provide the port. |
| STR umNodeNumber | 1.3.6.1.4.1.231.7.2.9.8.1 | DisplayString | read-only | The node number of the system. Unique number identifying the PBX. |
| INT umNumberOfSubscriberEntries | 1.3.6.1.4.1.231.7.2.9.8.4 | INTEGER | read-only | Number of entries in subscriber table. |
| INT umNumberOfUnconfirmedTraps | 1.3.6.1.4.1.231.7.2.9.8.6 | INTEGER | read-only | Number of entries in the umUnconfirmedTrapTable. A trap is confirmed and as result removed from the table, when its entry in the table is requested in a GetRequest for the 1st time. Traps presented in the table are retried as long as a GetRequest arrives. |
| INT umPortStatus | 1.3.6.1.4.1.231.7.2.9.8.5.1.7 | INTEGER | read-only | The status of the logical port. |
| umProxyGroup | 1.3.6.1.4.1.231.7.2.9.8 | |||
| INT umSrsEnabled | 1.3.6.1.4.1.231.7.2.9.8.2 | INTEGER | read-only | Indicates whether the SRS feature flag of the machine is enabled or not. The small remote site flag is an overall flag of the system. |
| INT umStationType | 1.3.6.1.4.1.231.7.2.9.8.5.1.6 | INTEGER | read-only | The type of the station. e.g. UP0, S0, HFA, ... |
| umSubscriberTable | 1.3.6.1.4.1.231.7.2.9.8.5 | not-accessible | This table contains information about all HFA-Clients available for UM-configuration. | |
| umSubscriberTableEntry | 1.3.6.1.4.1.231.7.2.9.8.5.1 | not-accessible | The UM-subscriber table entries. | |
| INT umTrapIdentifier | 1.3.6.1.4.1.231.7.2.9.8.7.1.1 | INTEGER | read-only | Unique identifier of the trap. A SetRequest with value 0 removes the entry from the table. A value unequal to 0 is erroneous. |
| INT umTrapLogicalPortNumber | 1.3.6.1.4.1.231.7.2.9.8.7.1.3 | INTEGER | read-only | In case of a modifySubscriber-type trap, the logical port number that was the reason for the traps is presented here. For the other umTrapTypes, the content is undefined! |
| INT umTrapType | 1.3.6.1.4.1.231.7.2.9.8.7.1.2 | INTEGER | read-only | The type of trap sent. Startup traps are sent as the system resets. The 2 types of modify traps aim on distinguishing between modification that are subscriber- related and those that are global. |
| umUnconfirmedTrapTable | 1.3.6.1.4.1.231.7.2.9.8.7 | not-accessible | This table contains information about traps sent to UM-Proxy. The contained traps have not yet been confirmed. | |
| umUnconfirmedTrapTableEntry | 1.3.6.1.4.1.231.7.2.9.8.7.1 | not-accessible | The unconfirmed traps table entries. |
RFC description
Vendor management MIB for the H150E product/model; manages device-specific configuration and status.
Start monitoring Siemens HiPath 3000 / Hicom 150E/H PBX with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.