M2000-V1

All MIBs › M2000-V1

Category: Device Management, Domain: Telco/Transport

Description: Version 1 SNMP MIB for the M2000 network management or telecommunications system providing device and service management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is M2000-V1?

M2000-V1 is a vendor SNMP MIB module (version 1) associated with an M2000 network/telecommunications management system, exposing device and service management objects for the platform it instruments. Given the lack of a detailed module description in the source data, it appears to cover general device configuration, status, and service-level management data typical of an NMS/EMS product's own SNMP interface. As a management-system MIB, its practical hardware/software monitoring value would lie in exposing the M2000 platform's own operational health, such as process/service availability and system status, to a higher-level monitoring or NOC tool, though the specific object set cannot be confirmed without the full module source. No dependency information is available from the provided data, so reliance on standard MIBs such as SNMPv2-MIB or the Host Resources MIB cannot be confirmed here. It would typically be deployed wherever the M2000 network/telecom management system itself is installed, allowing it to be monitored as a managed element within a broader NOC monitoring stack. Engineers can download the M2000-V1 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in M2000-V1. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

M2000 network/telecom management system

Monitoring Examples

No sample objects were provided for this module, so no specific object names can be cited with confidence; typical usage would involve polling the platform's own status and service-management objects to confirm the M2000 system and its managed services are running normally, but this cannot be grounded in real object names here.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
basicCompliance	1.3.6.1.4.1.2011.3.2.1
currentNotificationGroup	1.3.6.1.4.1.2011.3.1.2
currentObjectGroup	1.3.6.1.4.1.2011.3.1.1
iMAP	1.3.6.1.4.1.2011
iMAPCompliances	1.3.6.1.4.1.2011.3.2
iMAPConformance	1.3.6.1.4.1.2011.3
iMAPGroups	1.3.6.1.4.1.2011.3.1
iMAPNetManagement	1.3.6.1.4.1.2011.2.15
iMAPNorthbound	1.3.6.1.4.1.2011.2.15.2
OCT iMAPNorthboundAlarmAcknowledge	1.3.6.1.4.1.2011.2.15.2.4.4.1	OCTET STRING	read-write	Give serial number(s) of alarms to be acknowledged. Multiple serial numbers are separated by comma(,). Alarms serial number(s) are of type unsigned long and incompatible types are automatically considered as invalid serial number(s). Get attempt on this node will result in error. Output: Serial number(s) of alarms which could not be acknowledged. This also contains invalid Alarm serial number(s). If all alarms are successfully acknowledged then output is blank.
OCT iMAPNorthboundAlarmAckTime	1.3.6.1.4.1.2011.2.15.2.4.3.3.14	OCTET STRING	read-only	Acknowledged time
OCT iMAPNorthboundAlarmAdditionalInfo	1.3.6.1.4.1.2011.2.15.2.4.3.3.51	OCTET STRING	read-only	Additional Information regarding the alarm
OCT iMAPNorthboundAlarmCategory	1.3.6.1.4.1.2011.2.15.2.4.3.3.2	OCTET STRING	read-only	Category can be one of the following: 1. Fault 2. Clear 3. Event 4. Acknowledge 5. Unacknowledge 9. Change
OCT iMAPNorthboundAlarmClear	1.3.6.1.4.1.2011.2.15.2.4.6.1	OCTET STRING	read-write	Give serial number(s) of alarms to be cleared. Multiple serial numbers are separated by comma(,). Alarms serial number(s)are of type unsigned long and incompatible types are automatically considered as invalid serial number(s). Get attempt on this node will result in error. Output: Serial number(s) of alarms which could not be cleared. This also contains invalid Alarm serial number(s). If all alarms are successfully cleared then output is blank.
OCT iMAPNorthboundAlarmClearCategory	1.3.6.1.4.1.2011.2.15.2.4.3.3.48	OCTET STRING	read-only	Clear Category of Alarms
OCT iMAPNorthboundAlarmClearOperator	1.3.6.1.4.1.2011.2.15.2.4.3.3.46	OCTET STRING	read-only	The operator who cleared this alarm.
OCT iMAPNorthboundAlarmClearType	1.3.6.1.4.1.2011.2.15.2.4.3.3.49	OCTET STRING	read-only	Clear type of alarms
INT iMAPNorthboundAlarmConfirm	1.3.6.1.4.1.2011.2.15.2.4.3.3.13	INTEGER	read-only	Alarm acknowledgement status 1:Acknowledged 2:Unacknowledged
OCT iMAPNorthboundAlarmCSN	1.3.6.1.4.1.2011.2.15.2.4.3.3.1	OCTET STRING	read-only	Alarm network number > 0
OCT iMAPNorthboundAlarmDevCsn	1.3.6.1.4.1.2011.2.15.2.4.3.3.8	OCTET STRING	read-only	Device serial number
OCT iMAPNorthboundAlarmExtendInfo	1.3.6.1.4.1.2011.2.15.2.4.3.3.27	OCTET STRING	read-only	Extended information (max: 250 characters)
INT iMAPNorthboundAlarmID	1.3.6.1.4.1.2011.2.15.2.4.3.3.9	INTEGER	read-only	Alarm ID
INT iMAPNorthboundAlarmLevel	1.3.6.1.4.1.2011.2.15.2.4.3.3.11	INTEGER	read-only	Level is the alarm severity. It can be one of the following: 1. Critical 2. Major 3. Minor 4. Warning 6. Cleared
OCT iMAPNorthboundAlarmMOName	1.3.6.1.4.1.2011.2.15.2.4.3.3.4	OCTET STRING	read-only	Managed object name
OCT iMAPNorthboundAlarmNEDevID	1.3.6.1.4.1.2011.2.15.2.4.3.3.7	OCTET STRING	read-only	NE ID
OCT iMAPNorthboundAlarmNEType	1.3.6.1.4.1.2011.2.15.2.4.3.3.6	OCTET STRING	read-only	NE type > 0
OCT iMAPNorthboundAlarmObjectInstanceType	1.3.6.1.4.1.2011.2.15.2.4.3.3.47	OCTET STRING	read-only	Object instance type
OCT iMAPNorthboundAlarmOccurTime	1.3.6.1.4.1.2011.2.15.2.4.3.3.3	OCTET STRING	read-only	Occurrence time
OCT iMAPNorthboundAlarmOperator	1.3.6.1.4.1.2011.2.15.2.4.3.3.16	OCTET STRING	read-only	It identifies the last user who has changed the Acknowledged State.
INT iMAPNorthboundAlarmParas1	1.3.6.1.4.1.2011.2.15.2.4.3.3.17	INTEGER	read-only	Reserved field 1
INT iMAPNorthboundAlarmParas10	1.3.6.1.4.1.2011.2.15.2.4.3.3.26	INTEGER	read-only	Reserved field 10
INT iMAPNorthboundAlarmParas2	1.3.6.1.4.1.2011.2.15.2.4.3.3.18	INTEGER	read-only	Reserved field 2
INT iMAPNorthboundAlarmParas3	1.3.6.1.4.1.2011.2.15.2.4.3.3.19	INTEGER	read-only	Reserved field 3
INT iMAPNorthboundAlarmParas4	1.3.6.1.4.1.2011.2.15.2.4.3.3.20	INTEGER	read-only	Reserved field 4
INT iMAPNorthboundAlarmParas5	1.3.6.1.4.1.2011.2.15.2.4.3.3.21	INTEGER	read-only	Reserved field 5
INT iMAPNorthboundAlarmParas6	1.3.6.1.4.1.2011.2.15.2.4.3.3.22	INTEGER	read-only	Reserved field 6
INT iMAPNorthboundAlarmParas7	1.3.6.1.4.1.2011.2.15.2.4.3.3.23	INTEGER	read-only	Reserved field 7
INT iMAPNorthboundAlarmParas8	1.3.6.1.4.1.2011.2.15.2.4.3.3.24	INTEGER	read-only	Reserved field 8
INT iMAPNorthboundAlarmParas9	1.3.6.1.4.1.2011.2.15.2.4.3.3.25	INTEGER	read-only	Reserved field 9
OCT iMAPNorthboundAlarmProbablecause	1.3.6.1.4.1.2011.2.15.2.4.3.3.28	OCTET STRING	read-only	Alarm Probablecause (max: 250 characters)
INT iMAPNorthboundAlarmProductID	1.3.6.1.4.1.2011.2.15.2.4.3.3.5	INTEGER	read-only	Product type ID: 1:transmission 2:mobile 3:fixed network narrowband 4:fixed network broadband 5:intelligent network 6:omc
OCT iMAPNorthboundAlarmProposedrepairactions	1.3.6.1.4.1.2011.2.15.2.4.3.3.29	OCTET STRING	read-only	Alarm Proposed Repairactions (max: 250 characters)
OCT iMAPNorthboundAlarmQuery	1.3.6.1.4.1.2011.2.15.2.4.1.5	OCTET STRING	read-write	Accepts only values 0 and 1 (single character) Attempt to set any other value returns error 1-> starts query active alarm process (if previous query alarm process is in progress then error is returned) 0-> stops the previous query active alarm process in progress (if any)
INT iMAPNorthboundAlarmRestore	1.3.6.1.4.1.2011.2.15.2.4.3.3.12	INTEGER	read-only	Alarm clear status 1:Cleared 2:Uncleared
OCT iMAPNorthboundAlarmRestoreTime	1.3.6.1.4.1.2011.2.15.2.4.3.3.15	OCTET STRING	read-only	Cleared time
OCT iMAPNorthboundAlarmServiceAffectFlag	1.3.6.1.4.1.2011.2.15.2.4.3.3.50	OCTET STRING	read-only	Affecting service flag for the alarm
OCT iMAPNorthboundAlarmSpecificproblems	1.3.6.1.4.1.2011.2.15.2.4.3.3.30	OCTET STRING	read-only	Alarm Specific Problems (max: 250 characters)
INT iMAPNorthboundAlarmType	1.3.6.1.4.1.2011.2.15.2.4.3.3.10	INTEGER	read-only	Alarm type.
OCT iMAPNorthboundAlarmUnAcknowledge	1.3.6.1.4.1.2011.2.15.2.4.5.1	OCTET STRING	read-write	Give serial number(s) of alarms to be unacknowledged. Multiple serial numbers are separated by comma(,). Alarms serial number(s) are of type unsigned long and incompatible types are automatically considered as invalid serial number(s). Get attempt on this node will result in error. Output: Serial number(s) of alarms which could not be unacknowledged. This also contains invalid Alarm serial number(s). If all alarms are successfully unacknowledged then output is blank.
iMAPNorthboundCommon	1.3.6.1.4.1.2011.2.15.2.1
iMAPNorthboundCommuLinkMonitor	1.3.6.1.4.1.2011.2.15.2.1.3
iMAPNorthboundEventMgmt	1.3.6.1.4.1.2011.2.15.2.1.2
iMAPNorthboundFault	1.3.6.1.4.1.2011.2.15.2.4
iMAPNorthboundFaultAcknowledge	1.3.6.1.4.1.2011.2.15.2.4.4
iMAPNorthboundFaultAlarmNotification	1.3.6.1.4.1.2011.2.15.2.4.3.3
iMAPNorthboundFaultAlarmNotificationV2	1.3.6.1.4.1.2011.2.15.2.4.3.3.0
NTF iMAPNorthboundFaultAlarmQueryBeginNotificationType	1.3.6.1.4.1.2011.2.15.2.4.3.3.0.2			The M2000 notifies the NMS of the start of the query. After the NMS receives the active alarm query start trap, the query starts. The trap is triggered by NMS for alarm query.
NTF iMAPNorthboundFaultAlarmQueryEndNotificationType	1.3.6.1.4.1.2011.2.15.2.4.3.3.0.4			The M2000 notifies the NMS of the stop of the query. After the NMS receives the active alarm query stop trap, it indicates that the query ends. The NMS triggers the stop of the query, or the query ends after the NMS receives the active alarms.
NTF iMAPNorthboundFaultAlarmQueryNotificationType	1.3.6.1.4.1.2011.2.15.2.4.3.3.0.3			The M2000 system sends queried alarms to the NMS using this trap.
NTF iMAPNorthboundFaultAlarmReportNotificationType	1.3.6.1.4.1.2011.2.15.2.4.3.3.0.1			The M2000 system sends real-time alarms to the NMS using this trap. If an alarm occurs to an NE or the M2000, the M2000 sends the alarm trap to the NMS.
iMAPNorthboundFaultClear	1.3.6.1.4.1.2011.2.15.2.4.6
iMAPNorthboundFaultNotification	1.3.6.1.4.1.2011.2.15.2.4.3
iMAPNorthboundFaultQuery	1.3.6.1.4.1.2011.2.15.2.4.1
iMAPNorthboundFaultUnAcknowledge	1.3.6.1.4.1.2011.2.15.2.4.5
iMAPNorthboundHeartbeatNotification	1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1
NTF iMAPNorthboundHeartbeatNotificationType	1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.0.5			The M2000 sends the heartbeat notification trap to the NMS regularly each period. If the NMS receives the trap, the connection between the NMS and the M2000 works. If not, the connection fails.
iMAPNorthboundHeartbeatNotificationV2	1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.0
INT iMAPNorthboundHeartbeatPeriod	1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.2	INTEGER	read-only	Heartbeat period (must be greater than 0), in seconds
iMAPNorthboundHeartbeatSvc	1.3.6.1.4.1.2011.2.15.2.1.3.1
INT iMAPNorthboundHeartbeatSvcReportInterval	1.3.6.1.4.1.2011.2.15.2.1.3.1.1	INTEGER	read-write	Accepts integral values in the range 3-300 (both end inclusive) Sets heartbeat interval to the value supplied. A heart beat is sent immediately consisting of changed interval. Attempt to set with invalid value results in error.
OCT iMAPNorthboundHeartbeatSystemLabel	1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.1	OCTET STRING	read-only	Managed system ID: indicates the managed system from which the heartbeat notification is reported. It uniquely identifies one EMS.
OCT iMAPNorthboundHeartbeatTimeStamp	1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.3	OCTET STRING	read-only	Time stamp: the time when the notification is generated
iMAPNorthboundNotificationCommon	1.3.6.1.4.1.2011.2.15.2.1.2.1.1
iMAPNorthboundNotificationReport	1.3.6.1.4.1.2011.2.15.2.1.2.1
products	1.3.6.1.4.1.2011.2

RFC description

Defines SNMP Northbound Interface objects for iMAP management systems and event notification reporting.

Start monitoring M2000 network/telecom management system with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download M2000-V1

What Is M2000-V1?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description