MATIP-MIB

All MIBs › MATIP-MIB

Category: Domain: Telco/Transport

Description: Mapping of Airline Traffic over IP (MATIP) MIB defining SNMP objects for monitoring MATIP sessions used in airline reservation networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MATIP-MIB?

MATIP-MIB is a specialized MIB module for monitoring Mapping of Airline Traffic over IP (MATIP) sessions, a protocol used to carry airline reservation and messaging traffic over IP networks. It is expected to expose session-oriented data such as active MATIP session/user counts, session state, and per-session connection information between airline hosts, given its stated focus on the number of users in the table. Its monitoring value is centered on protocol/session-level software status — tracking how many MATIP sessions are active and whether sessions establish/terminate normally — critical for airline reservation network reliability rather than physical hardware health. As a niche application-layer protocol MIB, it likely depends on standard TCP/IP MIBs for underlying transport-connection status even though MATIP itself operates as an application on top of IP. It is deployed in airline industry IT infrastructure where MATIP gateways or hosts need SNMP-based visibility into reservation-network session activity. Network engineers evaluating or troubleshooting this functionality can download the MATIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MATIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MATIP gateway/host used in airline reservation networks

Monitoring Examples

No sample object names were provided for this module, so specific table entries cannot be cited directly; based on the description, an administrator would poll a MATIP session table to check the current session/user count and per-session state, watching for sessions stuck in a non-established state. An unexpectedly low or zero active-session count during business hours would indicate a MATIP gateway or connectivity failure affecting airline reservation traffic.

What Can Be Monitored

active MATIP session count
session state
per-session connection status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
TimeTicks
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
ngcan	1.3.6.1.4.1.1978
tiger	1.3.6.1.4.1.1978.2
matipMIB	1.3.6.1.4.1.1978.2.7
matipUser	1.3.6.1.4.1.1978.2.7.2
INT matipNumUsers	1.3.6.1.4.1.1978.2.7.2.1	INTEGER	read-only	Number of users in the table.
matipUserTable	1.3.6.1.4.1.1978.2.7.2.2		not-accessible	A list of line table entries. The number of entries is given by the value of matipNumUsers.
matipUserEntry	1.3.6.1.4.1.1978.2.7.2.2.1		not-accessible	An entry containing information applicable to a particular MATIP user.
INT matipUserIndex	1.3.6.1.4.1.1978.2.7.2.2.1.1	INTEGER	read-write	The user identifier.
INT matipUserHLD	1.3.6.1.4.1.1978.2.7.2.2.1.2	INTEGER	read-write	The HLD associated with this device.
INT matipUserA1	1.3.6.1.4.1.1978.2.7.2.2.1.3	INTEGER	read-write	The A1 associated with this device.
INT matipUserA2	1.3.6.1.4.1.1978.2.7.2.2.1.4	INTEGER	read-write	The A2 associated with this device.
INT matipUserSessionRef	1.3.6.1.4.1.1978.2.7.2.2.1.5	INTEGER	read-write	The MATIP session identifier (i.e. the interface index of the associated MATIP session). At configuration time, if the value is zero, then session has not been pre-allocated; otherwise, this value signifies the configured session to use.
INT matipUserCoding	1.3.6.1.4.1.1978.2.7.2.2.1.6	INTEGER	read-write	Defines the coding or data that is associated with this entry: paddedbaudot: 5 bits ipars: 6 bits ascii: 7 bits ebcdic: 8 bits
INT matipUserPresentationMode	1.3.6.1.4.1.1978.2.7.2.2.1.7	INTEGER	read-write	The type of presentation: p1024b p1024c sna3270 (not currently supported)
INT matipUserQueueThresholdHi	1.3.6.1.4.1.1978.2.7.2.2.1.8	INTEGER	read-write	Count of messages queued to the MATIP user before flow control is initiated by 'pushing back' on the MATIP session stream.
INT matipUserQueueThresholdLow	1.3.6.1.4.1.1978.2.7.2.2.1.9	INTEGER	read-write	Count of messages queued to the MATIP user before re-enabling on the MATIP session stream.
TIK matipUserStateTime	1.3.6.1.4.1.1978.2.7.2.2.1.10	TimeTicks	read-only	The amount of time (in hundredths of a second) since this user entered the current state.
INT matipUserStatus	1.3.6.1.4.1.1978.2.7.2.2.1.11	INTEGER	read-only	Connect State of the MATIP User
CTR matipUserMsgsIn	1.3.6.1.4.1.1978.2.7.2.2.1.12	Counter	read-only	The total number of messages from the Type A device.
CTR matipUserMsgsOut	1.3.6.1.4.1.1978.2.7.2.2.1.13	Counter	read-only	The total number of messages sent to the Type A device.
CTR matipUserCharIn	1.3.6.1.4.1.1978.2.7.2.2.1.14	Counter	read-only	The total number of characters from the Type A device.
CTR matipUserCharOut	1.3.6.1.4.1.1978.2.7.2.2.1.15	Counter	read-only	The total number of characters sent to the Type A device.
CTR matipUserDisconnects	1.3.6.1.4.1.1978.2.7.2.2.1.16	Counter	read-only	The total number of MATIP User disconnects.
INT matipUserTrapReason	1.3.6.1.4.1.1978.2.7.2.2.1.17	INTEGER	read-only	The reason that the matipUserStateChange trap was generated: up - when the MATIP User enters 'connected' state. down - when the MATIP User enters 'disconnected' state.
INT matipUserStateChangeTrapEnable	1.3.6.1.4.1.1978.2.7.2.2.1.18	INTEGER	read-write	Indicates whether matipUserStateChange traps should be generated for this interface. disabled - do not generate a trap enabled - generate trap when a user enters either the connected or disconnected state. partial - same as 'enabled' except only for those MATIP sessions initiated by this end.
matipSession	1.3.6.1.4.1.1978.2.7.3
matipSessionTable	1.3.6.1.4.1.1978.2.7.3.3		not-accessible	A list of MATIP sessions.
matipSessionEntry	1.3.6.1.4.1.1978.2.7.3.3.1		not-accessible	An entry containing information applicable to a particular MATIP session.
INT matipSessionIndex	1.3.6.1.4.1.1978.2.7.3.3.1.1	INTEGER	read-write	The identifier that can be used to locate this session.
INT matipSessionClientServer	1.3.6.1.4.1.1978.2.7.3.3.1.2	INTEGER	read-write	Flag defining the Client/Server nature of the product. 'both' is not supported by TIGER because 'client' serves as both client and server.
INT matipSessionMuxMode	1.3.6.1.4.1.1978.2.7.3.3.1.3	INTEGER	read-write	Multiplexor Mode for this session defined as follows: HLD/A1/A2: 4 Byte ASCU definition A1/A2: 2 Byte ASCU definition Single: No multiplexing.
INT matipSessionPresentationMode	1.3.6.1.4.1.1978.2.7.3.3.1.4	INTEGER	read-write	The type of presentation: p1024b p1024c sna3270 (not currently supported)
INT matipSessionCoding	1.3.6.1.4.1.1978.2.7.3.3.1.5	INTEGER	read-write	Defines the coding or data that is associated with this entry: paddedbaudot: 5 bits, ipars: 6 bits, ascii: 7 bits, ebcdic: 8 bits
INT matipSessionRestartTimer	1.3.6.1.4.1.1978.2.7.3.3.1.6	INTEGER	read-write	The number of seconds that will be waited before the MATIP session will be restarted. A value of zero indicates that timing will not occur. The session restart timer is only used when matipSessionClientServer is set to 'client' and matipSessionDialOnDemand is 'disabled'.
INT matipSessionDialOnDemand	1.3.6.1.4.1.1978.2.7.3.3.1.7	INTEGER	read-write	When dial on demand is enabled, the TCP session will only be started upon received data from the MATIP user.
INT matipSessionActivityTimer	1.3.6.1.4.1.1978.2.7.3.3.1.8	INTEGER	read-write	The number of seconds of inactivity before the TCP session will be disconnected.
INT matipSessionQueueThresholdHi	1.3.6.1.4.1.1978.2.7.3.3.1.9	INTEGER	read-write	The queueing limit for traffic being sent to the AUTIF module. When this is reached, the software will push back against the MATIP users.
INT matipSessionQueueThresholdLow	1.3.6.1.4.1.1978.2.7.3.3.1.10	INTEGER	read-write	The level at which the user queues will be re-enabled.
TIK matipSessionConnectTime	1.3.6.1.4.1.1978.2.7.3.3.1.11	TimeTicks	read-only	The amount of time (in hundredths of a second) since this transport connection last entered the 'connected' state. A value of zero means this transport connection has never been established.
INT matipSessionStatus	1.3.6.1.4.1.1978.2.7.3.3.1.12	INTEGER	read-only	The state of this transport connection: 'sessionDown' - when this MATIP session is created by the configuration, or when the TCP connection fails. 'sessionActivated' - when the MATIP state machine has sent an SO command and is waiting for an OC response. 'sessionConnected' - when the MATIP session layer can begin Data Transfer.
CTR matipSessionDisconnects	1.3.6.1.4.1.1978.2.7.3.3.1.13	Counter	read-only	The Total number of MATIP session Disconnects.
CTR matipSessionSOSent	1.3.6.1.4.1.1978.2.7.3.3.1.14	Counter	read-only	The count of SO Commands sent.
CTR matipSessionSOReceived	1.3.6.1.4.1.1978.2.7.3.3.1.15	Counter	read-only	The count of SO Commands received.
CTR matipSessionOCSent	1.3.6.1.4.1.1978.2.7.3.3.1.16	Counter	read-only	The count of OC Commands sent.
CTR matipSessionOCReceived	1.3.6.1.4.1.1978.2.7.3.3.1.17	Counter	read-only	The count of OC Commands received.
CTR matipSessionSCSent	1.3.6.1.4.1.1978.2.7.3.3.1.18	Counter	read-only	The count of SC Commands sent.
CTR matipSessionSCReceived	1.3.6.1.4.1.1978.2.7.3.3.1.19	Counter	read-only	The count of SC Commands received.
CTR matipSessionDataSent	1.3.6.1.4.1.1978.2.7.3.3.1.20	Counter	read-only	The count of data packets sent.
CTR matipSessionDataReceived	1.3.6.1.4.1.1978.2.7.3.3.1.21	Counter	read-only	The count of data packets received.
INT matipSessionStateChangeTrapEnable	1.3.6.1.4.1.1978.2.7.3.3.1.22	INTEGER	read-write	Indicates whether matipSessionStateChange traps should be generated for this interface. disabled - do not generate a trap enabled - generate trap when a session enters either the connected or disconnected state. or when any 'partner reject' occurs. partial - same as 'enabled' except only when the session is closed with busy.
INT matipSessionTrapReason	1.3.6.1.4.1.1978.2.7.3.3.1.23	INTEGER	read-only	The reason that the matipSessionStateChange trap was generated: up - when the session enters 'connected' state. down - when the session enters 'disconnected' state.
matipTraps	1.3.6.1.4.1.1978.2.7.4
matipUserTraps	1.3.6.1.4.1.1978.2.7.4.1
NTF matipUserStateChange	1.3.6.1.4.1.1978.2.7.4.1.0.1			This trap signifies that one of the users has changed state to/from connected/disconnected as given by matipUserTrapReason.
matipSessionTraps	1.3.6.1.4.1.1978.2.7.4.2
NTF matipSessionStateChange	1.3.6.1.4.1.1978.2.7.4.2.0.1			This trap signifies that one of the sessions has changed state to/from connected/disconnected as given by matipSessionTrapReason.

RFC description

Manages MATIP (Madge APPN Interface Protocol) sessions, users, and network access device statistics on Northrop Grumman Tiger devices.

Start monitoring MATIP gateway/host used in airline reservation networks with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MATIP-MIB

What Is MATIP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description