All MIBs › LaserJet-Series8100-Stapler-MIB › prtoutputmindimxfeeddir
prtoutputmindimxfeeddir
Module: LaserJet-Series8100-Stapler-MIB
OID (symbolic): LaserJet-Series8100-Stapler-MIB::prtoutputmindimxfeeddir
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (DimUnit). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by this object depends on the value of prtOutputDimUnit. For example, for the built-in output trays, it is 38700 if prtOutputDimUnit is ePtenThousandthsOfInches or 98298 if prtOutputDimUnit is ePmicrometers.
What is prtoutputmindimxfeeddir?
This reports the minimum media dimension this output sub-unit supports measured ninety degrees across the paper feed direction, in the units set by prtoutputdimunit. An admin uses it to know the narrowest paper width a given output bin can reliably accept, with the sensed value not changeable via SNMP. For example, the built-in output trays return 38700 in the applicable dimensional unit as their minimum cross-feed width.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 snmpwalk -v2c -c public <target> LaserJet-Series8100-Stapler-MIB::prtoutputmindimxfeeddir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18.1 snmpget -v2c -c public <target> LaserJet-Series8100-Stapler-MIB::prtoutputmindimxfeeddir.1
Start monitoring HP LaserJet 8100 series printer with stapler/finisher accessory with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series8100-Stapler-MIB::prtoutputmindimxfeeddir OID value, configure state conditions and alerts, and monitor any HP LaserJet 8100 series printer with stapler/finisher accessory from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | prtOutput | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | prtOutputTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | prtOutputEntry | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 | prtoutputmindimxfeeddir | LaserJet-Series8100-Stapler-MIB |